Biblio

This paper present a new Low Drop-Out Voltage Regulator (LDO) and highlight the topologies and the advantages of the LDO for hardware security protection of Wireless Sensor Networks (WSNs), this integrated circuits are considered as an ideal solution in low power System on-chip applications (SOC) for their compact sizes and low cost. The advancement in low-power design makes it possible that ubiquitous device can be powered by low-power energy source such as ambient energy or small size batteries. In many well supplied devices the problem related to power is essentially related to cost. However for low-powered devices the problem of power is not only economics but also becomes very essential in terms of functionality. Due to the usual very small amount of energy or unstable energy available the way the engineer manages power becomes a key point in this area. Therefore, another focus of this dissertation is to try finding ways to improve the security of power management problems. Complementary metal oxide-semiconductor (CMOS) has become the predominant technology in integrated circuit design due to its high density, power savings and low manufacturing costs. The whole integrated circuit industry will still continue to benefit from the geometric downsizing that comes with every new generation of semiconductor manufacturing processes. Therefore, only several CMOS analog integrated circuit design techniques are proposed for low-powered ubiquitous device in this dissertation. This paper reviews the basics of LDO regulators and discusses the technology advances in the latest generation of LDOs that make them the preferred solution for many points of load power requirements. The paper will also introduce characteristics of CMOS LDO regulators and discuss their unique benefits in portable electronics applications. these new device offer a real advantages for the power management security of new applications mobile. Power efficiency and some practical issues for the CMOS im- lementation of these LDO structures are discussed.

RPL is a lightweight IPv6 network routing protocol specifically designed by IETF, which can make full use of the energy of intelligent devices and compute the resource to build the flexible topological structure. This paper analyzes the security problems of RPL, sets up a test network to test RPL network security, proposes a RPL based security routing protocol M-RPL. The routing protocol establishes a hierarchical clustering network topology, the intelligent device of the network establishes the backup path in different clusters during the route discovery phase, enable backup paths to ensure data routing when a network is compromised. Setting up a test prototype network, simulating some attacks against the routing protocols in the network. The test results show that the M-RPL network can effectively resist the routing attacks. M-RPL provides a solution to ensure the Internet of Things (IoT) security.

We all are very much aware of IoT that is Internet of Things which is emerging technology in today's world. The new and advanced field of technology and inventions make use of IoT for better facility. The Internet of Things (IoT) is a system of interrelated computing devices, mechanical and digital machines, objects, animals or people that are provided with unique identifiers and the ability to transfer data over a network without requiring human-to-human or human-to-computer interaction. Our project is based on IoT and other supporting techniques which can bring out required output. Security issues are everywhere now-a-days which we are trying to deal with by our project. Our security throwbot (a throwable device) will be tossed into a room after activating it and it will capture 360 degree panaromic video from a single IP camera, by using two end connectivity that is, robot end and another is user end, will bring more features to this project. Shape of the robot will be shperical so that problem of retrieving back can be solved. Easy to use and cheap to buy is one of our goal which will be helpful to police and soldiers who get stuck in situations where they have to question oneself before entering to dangerous condition/room. Our project will help them to handle and verify any area before entering by just throwing this robot and getting the sufficient results.

Internet of Things (IoT) depicts an intelligent future, where any IoT-based devices having a sensorial and computing capabilities to interact with each other. Recently, we are living in the area of internet and rapidly moving towards a smart planet where devices are capable to be connected to each other. Cooperative ad-hoc vehicle systems are the main driving force for the actualization of IoT-based concept. Vehicular Ad-hoc Network (VANET) is considered as a promising platform for the intelligent wireless communication system. This paper presents and analyzes the tradeoffs between the security and reliability of the IoT-based VANET system in the presence of eavesdropping attacks using smart vehicle relays based on opportunistic relay selection (ORS) scheme. Then, the optimization of the distance between the source (S), destination (D), and Eavesdropper (E) is illustrated in details, showing the effect of this parameter on the IoT-based network. In order to improve the SRT, we quantify the attainable SRT improvement with variable distances between IoT-based nodes. It is shown that given the maximum tolerable Intercept Probability (IP), the Outage Probability (OP) of our proposed model approaches zero for Ge → ∞, where Ge is distance ratio between S — E via the vehicle relay (R).

Cognitive radio networks (CRNs) have a great potential in supporting time-critical data delivery among the Internet of Things (IoT) devices and for emerging applications such as smart cities. However, the unique characteristics of different technologies and shared radio operating environment can significantly impact network availability. Hence, in this paper, we study the channel assignment problem in time-critical IoT-based CRNs under proactive jamming attacks. Specifically, we propose a probabilistic spectrum assignment algorithm that aims at minimizing the packet invalidity ratio of each cognitive radio (CR) transmission subject to delay constrains. We exploit the statistical information of licensed users' activities, fading conditions, and jamming attacks over idle channels. Simulation results indicate that network performance can be significantly improved by using a security- availability- and quality-aware channel assignment that provides communicating CR pair with the most secured channel of the lowest invalidity ratio.

With the evolution of computing from using personal computers to use of online Internet of Things (IoT) services and applications, security risks have also evolved as a major concern. The use of Fog computing enhances reliability and availability of the online services due to enhanced heterogeneity and increased number of computing servers. However, security remains an open challenge. Various trust models have been proposed to measure the security strength of available service providers. We utilize the quantized security of Datacenters and propose a new security-based service broker policy(SbSBP) for Fog computing environment to allocate the optimal Datacenter(s) to serve users' requests based on users' requirements of cost, time and security. Further, considering the dynamic nature of Fog computing, the concept of dynamic reconfiguration has been added. Comparative analysis of simulation results shows the effectiveness of proposed policy to incorporate users' requirements in the decision-making process.

The Internet of Things (IoT) has bridged our physical world to the cyber world which allows us to achieve our desired lifestyle. However, service security is an essential part to ensure that the designed service is not compromised. In this paper, we proposed a security analysis for IoT services. We focus on the context of detecting malicious operation from an event log of the designed IoT services. We utilized Petri nets with data to model IoT service which is logically correct. Then, we check the trace from an event log by tracking the captured process and data. Finally, we illustrated the approach with a smart home service and showed the effectiveness of our approach.

The exploitation of Industrial Control Systems (ICSs) has been described as both easy and impossible, where is the truth? PostStuxnet works have included a plethora of ICS focused cyber security research activities, with topics covering device maturity, network protocols, and overall cyber security culture. We often hear the notion of ICSs being highly vulnerable due to a lack of inbuilt security mechanisms, considered a low hanging fruit to a variety of low skilled threat actors. While there is substantial evidence to support such a notion, when considering targeted attacks on ICS, it is hard to believe an attacker with limited resources, such as a script kiddie or hacktivist, using publicly accessible tools and exploits alone, would have adequate knowledge and resources to achieve targeted operational process manipulation, while simultaneously evade detection. Through use of a testbed environment, this paper provides two practical examples based on a Man-In-The-Middle scenario, demonstrating the types of information an attacker would need obtain, collate, and comprehend, in order to begin targeted process manipulation and detection avoidance. This allows for a clearer view of associated challenges, and illustrate why targeted ICS exploitation might not be possible for every malicious actor.

The prevalence and effectiveness of phishing attacks, despite the presence of a vast array of technical defences, are due largely to the fact that attackers are ruthlessly targeting what is often referred to as the weakest link in the system - the human. This paper reports the results of an investigation into how end users behave when faced with phishing websites and how this behaviour exposes them to attack. Specifically, the paper presents a proof of concept computer model for simulating human behaviour with respect to phishing website detection based on the ACT-R cognitive architecture, and draws conclusions as to the applicability of this architecture to human behaviour modelling within a phishing detection scenario. Following the development of a high-level conceptual model of the phishing website detection process, the study draws upon ACT-R to model and simulate the cognitive processes involved in judging the validity of a representative webpage based primarily around the characteristics of the HTTPS padlock security indicator. The study concludes that despite the low-level nature of the architecture and its very basic user interface support, ACT-R possesses strong capabilities which map well onto the phishing use case, and that further work to more fully represent the range of human security knowledge and behaviours in an ACT-R model could lead to improved insights into how best to combine technical and human defences to reduce the risk to end users from phishing attacks.

This paper describes a unified framework for the simulation and analysis of cyber physical systems (CPSs). The framework relies on the FreeBSD-based IMUNES network simulator. Components of the CPS are modeled as nodes within the IMUNES network simulator; nodes that communicate using real TCP/IP traffic. Furthermore, the simulated system can be exposed to other networks and the Internet to make it look like a real SCADA system. The frame-work has been used to simulate a TRIGA nuclear reactor. This is accomplished by creating nodes within the IMUNES network capable of running system modules simulating different CPS components. Nodes communicate using MODBUS/TCP, a widely used process control protocol. A goal of this work is to eventually integrate the simulator with a honeynet. This allows researchers to not only simulate a digital control system using real TCP/IP traffic to test control strategies and network topologies, but also to explore possible cyber attacks and mitigation strategies.

The need for security in today's world has become a mandatory issue to look after. With the increase in a number of thefts, it has become a necessity to implement a smart security system. Due to the high cost of the existing smart security systems which use conventional Bluetooth and other wireless technologies and their relatively high energy consumption, implementing a security system with low energy consumption at a low cost has become the need of the hour. The objective of the paper is to build a cost effective and low energy consumption security system using the Bluetooth Low Energy (BLE) technology. This system will help the user to monitor and manage the security of the house even when the user is outside the house with the help of webpage. This paper presents the design and implementation of a security system using PSoC 4 BLE which can automatically lock and unlock the door when the user in the vicinity and leaving the vicinity of the door respectively by establishing a wireless connection between the physical lock and the smartphone. The system also captures an image of a person arriving at the house and transmits it wirelessly to a webpage. The system also notifies the user of any intrusion by sending a message and the image of the intruder to the webpage. The user can also access the door remotely on the go from the website.

the terms Smart grid, IntelliGrid, and secure astute grid are being used today to describe technologies that automatically and expeditiously (separate far from others) faults, renovate potency, monitor demand, and maintain and recuperate (firm and steady nature/lasting nature/vigor) for more reliable generation, transmission, and distribution of electric potency. In general, the terms describe the utilization of microprocessor-predicated astute electronic contrivances (IEDs) communicating with one another to consummate tasks afore now done by humans or left undone. These IEDs watch/ notice/ celebrate/ comply with the state of the puissance system, make edified decisions, and then take action to preserve the (firm and steady nature/lasting nature/vigor) and performance of the grid. Technology use/military accommodation in the home will sanction end users to manage their consumption predicated on their own predilections. In order to manage their consumption or the injuctive authorization placed on the grid, people (who utilize a product or accommodation) need information and an (able to transmute and get better) power distribution system. The astute grid is an accumulation of information sources and the automatic control system that manages the distribution of puissance, understands the transmutations in demand, and reacts to it by managing demand replication. Different billing (prosperity plans/ways of reaching goals) for mutable time and type of avail, as well as conservation and use or sale of distributed utilizable things/valuable supplies, will become part of perspicacious solutions. The traditional electrical power grid is currently evolving into the perspicacious grid. Perspicacious grid integrates the traditional electrical power grid with information and communication technologies (ICT). Such integration empowers the electrical utilities providers and consumers, amends the efficiency and the availability of the puissance system while perpetually monitoring, - ontrolling and managing the authoritative ordinances of customers. A keenly intellective grid is an astronomically immense intricate network composed of millions of contrivances and entities connected with each other. Such a massive network comes with many security concerns and susceptibilities. In this paper, we survey the latest on keenly intellective grid security. We highlight the involution of the keenly intellective grid network and discuss the susceptibilities concrete to this sizably voluminous heterogeneous network. We discuss then the challenges that subsist in securing the keenly intellective grid network and how the current security solutions applied for IT networks are not adequate to secure astute grid networks. We conclude by over viewing the current and needed security solutions for the keenly intellective gird.

In a spectrally congested environment or a spectrally contested environment which often occurs in cyber security applications, multiple signals are often mixed together with significant overlap in spectrum. This makes the signal detection and parameter estimation task very challenging. In our previous work, we have demonstrated the feasibility of using a second order spectrum correlation function (SCF) cyclostationary feature to perform mixed signal detection and parameter estimation. In this paper, we present our recent work on software defined radio (SDR) based implementation and demonstration of such mixed signal detection algorithms. Specifically, we have developed a software defined radio based mixed RF signal generator to generate mixed RF signals in real time. A graphical user interface (GUI) has been developed to allow users to conveniently adjust the number of mixed RF signal components, the amplitude, initial time delay, initial phase offset, carrier frequency, symbol rate, modulation type, and pulse shaping filter of each RF signal component. This SDR based mixed RF signal generator is used to transmit desirable mixed RF signals to test the effectiveness of our developed algorithms. Next, we have developed a software defined radio based mixed RF signal detector to perform the mixed RF signal detection. Similarly, a GUI has been developed to allow users to easily adjust the center frequency and bandwidth of band of interest, perform time domain analysis, frequency domain analysis, and cyclostationary domain analysis.

The past ten years has seen increasing calls to make security research more “scientific”. On the surface, most agree that this is desirable, given universal recognition of “science” as a positive force. However, we find that there is little clarity on what “scientific” means in the context of computer security research, or consensus on what a “Science of Security” should look like. We selectively review work in the history and philosophy of science and more recent work under the label “Science of Security”. We explore what has been done under the theme of relating science and security, put this in context with historical science, and offer observations and insights we hope may motivate further exploration and guidance. Among our findings are that practices on which the rest of science has reached consensus appear little used or recognized in security, and a pattern of methodological errors continues unaddressed.

In this paper, we present a security and privacy enhancement (SPE) framework for unmodified mobile operating systems. SPE introduces a new layer between the application and the operating system and does not require a device be jailbroken or utilize a custom operating system. We utilize an existing ontology designed for enforcing security and privacy policies on mobile devices to build a policy that is customizable. Based on this policy, SPE provides enhancements to native controls that currently exist on the platform for privacy and security sensitive components. SPE allows access to these components in a way that allows the framework to ensure the application is truthful in its declared intent and ensure that the user's policy is enforced. In our evaluation we verify the correctness of the framework and the computing impact on the device. Additionally, we discovered security and privacy issues in several open source applications by utilizing the SPE Framework. From our findings, if SPE is adopted by mobile operating systems producers, it would provide consumers and businesses the additional privacy and security controls they demand and allow users to be more aware of security and privacy issues with applications on their devices.

Mobile applications have grown from knowing basic personal information to knowing intimate details of consumer's lives. The explosion of knowledge that applications contain and share can be contributed to many factors. Mobile devices are equipped with advanced sensors including GPS and cameras, while storing large amounts of personal information including photos and contacts. With millions of applications available to install, personal data is at constant risk of being misused. While mobile operating systems provide basic security and privacy controls, they are insufficient, leaving the consumer unaware of how applications are using permissions that were granted. In this paper, we propose a solution that aims to provide consumers awareness of applications misusing data and policies that can protect their data. From this investigation we present SPEProxy. SPEProxy utilizes a knowledge based approach to provide consumer's an ability to understand how applications are using permissions beyond their stated intent. Additionally, SPEProxy provides an awareness of fine grained policies that would allow the user to protect their data. SPEProxy is device and mobile operating system agnostic, meaning it does not require a specific device or operating system nor modification to the operating system or applications. This approach allows consumers to utilize the solution without requiring a high degree of technical expertise. We evaluated SPEProxy across 817 of the most popular applications in the iOS App Store and Google Play. In our evaluation, SPEProxy was highly effective across 86.55% applications where several well known applications exhibited misusing granted permissions.

Malware sandboxes, widely used by antivirus companies, mobile application marketplaces, threat detection appliances, and security researchers, face the challenge of environment-aware malware that alters its behavior once it detects that it is being executed on an analysis environment. Recent efforts attempt to deal with this problem mostly by ensuring that well-known properties of analysis environments are replaced with realistic values, and that any instrumentation artifacts remain hidden. For sandboxes implemented using virtual machines, this can be achieved by scrubbing vendor-specific drivers, processes, BIOS versions, and other VM-revealing indicators, while more sophisticated sandboxes move away from emulation-based and virtualization-based systems towards bare-metal hosts. We observe that as the fidelity and transparency of dynamic malware analysis systems improves, malware authors can resort to other system characteristics that are indicative of artificial environments. We present a novel class of sandbox evasion techniques that exploit the "wear and tear" that inevitably occurs on real systems as a result of normal use. By moving beyond how realistic a system looks like, to how realistic its past use looks like, malware can effectively evade even sandboxes that do not expose any instrumentation indicators, including bare-metal systems. We investigate the feasibility of this evasion strategy by conducting a large-scale study of wear-and-tear artifacts collected from real user devices and publicly available malware analysis services. The results of our evaluation are alarming: using simple decision trees derived from the analyzed data, malware can determine that a system is an artificial environment and not a real user device with an accuracy of 92.86%. As a step towards defending against wear-and-tear malware evasion, we develop statistical models that capture a system's age and degree of use, which can be used to aid sandbox operators in creating system i- ages that exhibit a realistic wear-and-tear state.

Mobile ad hoc networks (MANET) is a type of networks that consists of autonomous nodes connecting directly without a top-down network architecture or central controller. Absence of base stations in MANET force the nodes to rely on their adjacent nodes in transmitting messages. The dynamic nature of MANET makes the relationship between nodes untrusted due to mobility of nodes. A malicious node may start denial of service attack at network layer to discard the packets instead of forwarding them to destination which is known as black hole attack. In this paper a secure and trust based approach based on ad hoc on demand distance vector (STAODV) has been proposed to improve the security of AODV routing protocol. The approach isolates the malicious nodes that try to attack the network depending on their previous information. A trust level is attached to each participating node to detect the level of trust of that node. Each incoming packet will be examined to prevent the black hole attack.

Online Dynamic Security Assessment (DSA) is a dynamical system widely used for assessing and analyzing an electrical power system. The outcomes of DSA are used in many aspects of the operation of power system, from monitoring the system to determining remedial action schemes (e.g. the amount of generators to be shed at the event of a fault). Measurement from supervisory control and data acquisition (SCADA) and state estimation (SE) results are the inputs for online-DSA, however, the SE error, caused by sudden change in power flow or low convergence rate, could be unnoticed and skew the outcome. Therefore, generator shedding scheme cannot achieve optimum but must have some margin because we don't know how SE error caused by these problems will impact power system stability control. As a method for solving the problem, we developed SE error detection system (EDS), which is enabled by detecting the SE error that will impact power system transient stability. The method is comparing a threshold value and an index calculated by the difference between SE results and PMU observation data, using the distance from the fault point and the power flow value. Using the index, the reliability of the SE results can be verified. As a result, online-DSA can use the SE results while avoiding the bad SE results, assuring the outcome of the DSA assessment and analysis, such as the amount of generator shedding in order to prevent the power system's instability.

Science of security necessitates conducting methodologically-defensible research and reporting such research comprehensively to enable replication and future research to build upon the reported study. The comprehensiveness of reporting is as important as the research itself in building a science of security. Key principles of science - replication, meta-analysis, and theory building - are affected by the ability to understand the context and findings of published studies. The goal of this paper is to aid the security research community in understanding the state of scientific communication through the analysis of research published at top security conferences. To analyze scientific communication, we use literature on scientific evaluation to develop a set of rubrics as a guide to check the comprehensiveness of papers published in the IEEE Security and Privacy and ACM Computer and Communications Security conferences. Our review found that papers often omit certain types of information from their reports, including research objectives and threats to validity. Our hope is that this effort sheds some light on one of the essential steps towards advancement of the science of security.

In this study, it is proposed to carry out an efficient formulation in order to figure out the stochastic security-constrained generation capacity expansion planning (SC-GCEP) problem. The main idea is related to directly compute the line outage distribution factors (LODF) which could be applied to model the N - m post-contingency analysis. In addition, the post-contingency power flows are modeled based on the LODF and the partial transmission distribution factors (PTDF). The post-contingency constraints have been reformulated using linear distribution factors (PTDF and LODF) so that both the pre- and post-contingency constraints are modeled simultaneously in the SC-GCEP problem using these factors. In the stochastic formulation, the load uncertainty is incorporated employing a two-stage multi-period framework, and a K - means clustering technique is implemented to decrease the number of load scenarios. The main advantage of this methodology is the feasibility to quickly compute the post-contingency factors especially with multiple-line outages (N - m). This concept would improve the security-constraint analysis modeling quickly the outage of m transmission lines in the stochastic SC-GCEP problem. It is carried out several experiments using two electrical power systems in order to validate the performance of the proposed formulation.

Today, we witness the emergence of smart environments, where devices are able to connect independently without human- intervention. Mobile ad hoc networks are an example of smart environments that are widely deployed in public spaces. They offer great services and features compared with wired systems. However, these networks are more sensitive to malicious attacks because of the lack of infrastructure and the self-organizing nature of devices. Thus, communication between nodes is much more exposed to various security risks, than other networks. In this paper, we will present a synthetic study on security concept for MANETs, and then we will introduce a contribution based on evaluating link quality, using ETX metric, to enhance network availability.

Today, we witness the emergence of smart environments, where devices are able to connect independently without human- intervention. Mobile ad hoc networks are an example of smart environments that are widely deployed in public spaces. They offer great services and features compared with wired systems. However, these networks are more sensitive to malicious attacks because of the lack of infrastructure and the self-organizing nature of devices. Thus, communication between nodes is much more exposed to various security risks, than other networks. In this paper, we will present a synthetic study on security concept for MANETs, and then we will introduce a contribution based on evaluating link quality, using ETX metric, to enhance network availability.

Vehicular networks have been drawing special atten- tion in recent years, due to its importance in enhancing driving experience and improving road safety in future smart city. In past few years, several security services, based on cryptography, PKI and pseudonymous, have been standardized by IEEE and ETSI. However, vehicular networks are still vulnerable to various attacks, especially Sybil attack. In this paper, a Support Vector Machine (SVM) based Sybil attack detection method is proposed. We present three SVM kernel functions based classifiers to distinguish the malicious nodes from benign ones via evaluating the variance in their Driving Pattern Matrices (DPMs). The effectiveness of our proposed solution is evaluated through extensive simulations based on SUMO simulator and MATLAB. The results show that the proposed detection method can achieve a high detection rate with low error rate even under a dynamic traffic environment.

Internet of Things (IoT) is an emerging paradigm in information technology (IT) that integrates advancements in sensing, computing and communication to offer enhanced services in everyday life. IoTs are vulnerable to sybil attacks wherein an adversary fabricates fictitious identities or steals the identities of legitimate nodes. In this paper, we model sybil attacks in IoT and evaluate its impact on performance. We also develop a defense mechanism based on behavioural profiling of nodes. We develop an enhanced AODV (EAODV) protocol by using the behaviour approach to obtain the optimal routes. In EAODV, the routes are selected based on the trust value and hop count. Sybil nodes are identified and discarded based on the feedback from neighbouring nodes. Evaluation of our protocol in ns-2 simulator demonstrates the effectiveness of our approach in identifying and detecting sybil nodes in IoT network.