Biblio

The vision of cyber-physical systems (CPSs) considered the Internet as the future communication network for such systems. A challenge with this regard is to provide high communication reliability, especially, for CPSs applications in critical infrastructures. Examples include smart grid applications with reliability requirements between 99-99.9999% [2]. Even though the Internet is a cost effective solution for such applications, the reliability of its end-to-end (e2e) paths is inadequate (often less than 99%). In this paper, we propose Reliable Multipath Communication Approach for Internet-based CPSs (RC4CPS). RC4CPS is an e2e approach that utilizes the inherent redundancy of the Internet and multipath (MP) transport protocols concept to improve reliability measured in terms of availability. It provides online monitoring and MP selection in order to fulfill the application specific reliability requirement. In addition, our MP selection considers e2e paths dependency and unavailability prediction to maximize the reliability gains of MP communication. Our results show that RC4CPS dynamic MP selection satisfied the reliability requirement along with selecting e2e paths with low dependency and unavailability probability.

The main challenge of ultra-reliable machine-to-machine (M2M) control applications is to meet the stringent timing and reliability requirements of control systems, despite the adverse properties of wireless communication for delay and packet errors, and limited battery resources of the sensor nodes. Since the transmission delay and energy consumption of a sensor node are determined by the transmission power and rate of that sensor node and the concurrently transmitting nodes, the transmission schedule should be optimized jointly with the transmission power and rate of the sensor nodes. Previously, it has been shown that the optimization of power control and rate adaptation for each node subset can be separately formulated, solved and then used in the scheduling algorithm in the optimal solution of the joint optimization of power control, rate adaptation and scheduling problem. However, the power control and rate adaptation problem has been only formulated and solved for continuous rate transmission model, in which Shannon's capacity formulation for an Additive White Gaussian Noise (AWGN) wireless channel is used in the calculation of the maximum achievable rate as a function of Signal-to-Interference-plus-Noise Ratio (SINR). In this paper, we formulate the power control and rate adaptation problem with the objective of minimizing the time required for the concurrent transmission of a set of sensor nodes while satisfying their transmission delay, reliability and energy consumption requirements based on the more realistic discrete rate transmission model, in which only a finite set of transmit rates are supported. We propose a polynomial time algorithm to solve this problem and prove the optimality of the proposed algorithm. We then combine it with the previously proposed scheduling algorithms and demonstrate its close to optimal performance via extensive simulations.