Visible to the public Biblio

Filters: Keyword is lora  [Clear All Filters]
2022-12-06
Khodayer Al-Dulaimi, Omer Mohammed, Hassan Al-Dulaimi, Mohammed Khodayer, Khodayer Al-Dulaimi, Aymen Mohammed.  2022.  Analysis of Low Power Wireless Technologies used in the Internet of Things (IoT). 2022 2nd International Conference on Computing and Machine Intelligence (ICMI). :1-6.

The Internet of Things (IoT) is a novel paradigm that enables the development of a slew of Services for the future of technology advancements. When it comes to IoT applications, the cyber and physical worlds can be seamlessly integrated, but they are essentially limitless. However, despite the great efforts of standardization bodies, coalitions, companies, researchers, and others, there are still a slew of issues to overcome in order to fully realize the IoT's promise. These concerns should be examined from a variety of perspectives, including enabling technology, applications, business models, and social and environmental consequences. The focus of this paper is on open concerns and challenges from a technological standpoint. We will study the differences in technical such Sigfox, NB-IoT, LoRa, and 6LowPAN, and discuss their advantages and disadvantage for each technology compared with other technologies. Demonstrate that each technology has a position in the internet of things market. Each technology has different advantages and disadvantages it depends on the quality of services, latency, and battery life as a mention. The first will be analysis IoT technologies. SigFox technology offers a long-range, low-power, low-throughput communications network that is remarkably resistant to environmental interference, enabling information to be used efficiently in a wide variety of applications. We analyze how NB-IoT technology will benefit higher-value-added services markets for IoT devices that are willing to pay for exceptionally low latency and high service quality. The LoRa technology will be used as a low-cost device, as it has a very long-range (high coverage).

2022-01-31
Grabatin, Michael, Hommel, Wolfgang.  2021.  Self-sovereign Identity Management in Wireless Ad Hoc Mesh Networks. 2021 IFIP/IEEE International Symposium on Integrated Network Management (IM). :480–486.

Verifying the identity of nodes within a wireless ad hoc mesh network and the authenticity of their messages in sufficiently secure, yet power-efficient ways is a long-standing challenge. This paper shows how the more recent concepts of self-sovereign identity management can be applied to Internet-of-Things mesh networks, using LoRaWAN as an example and applying Sovrin's decentralized identifiers and verifiable credentials in combination with Schnorr signatures for securing the communication with a focus on simplex and broadcast connections. Besides the concept and system architecture, the paper discusses an ESP32-based implementation using SX1276/SX1278 LoRa chips, adaptations made to the lmic- and MbedTLS-based software stack, and practically evaluates performance aspects in terms of data overhead, time-on-air impact, and power consumption.

2021-03-01
Chakravarty, S., Hopkins, A..  2020.  LoRa Mesh Network with BeagleBone Black. 2020 Fourth World Conference on Smart Trends in Systems, Security and Sustainability (WorldS4). :306–311.
This paper investigates the use of BeagleBone Black Wireless single-board Linux computers with Long Range (LoRa) transceivers to send and receive information in a mesh network while one of the transmitting/receiving nodes is acting as a relay in the system. An experiment is conducted to examine how long each LoRa node needed to learn the transmission intervals of any other transmitting nodes on the network and to synchronize with the other nodes prior to transmission. The spread factor, bandwidth, and coding rate are all varied for a total of 18 different combinations. A link to the Python code used on the BeagleBone Black is provided at the end of this paper. The best parameter combinations for each individual node and for the system as a whole is investigated. Additional experiments and applications of this technology are explored in the conclusions.
2021-02-10
Hou, N., Zheng, Y..  2020.  CloakLoRa: A Covert Channel over LoRa PHY. 2020 IEEE 28th International Conference on Network Protocols (ICNP). :1—11.
This paper describes our design and implementation of a covert channel over LoRa physical layer (PHY). LoRa adopts a unique modulation scheme (chirp spread spectrum (CSS)) to enable long range communication at low-power consumption. CSS uses the initial frequencies of LoRa chirps to differentiate LoRa symbols, while simply ignoring other RF parameters (e.g., amplitude and phase). Our study reveals that the LoRa physical layer leaves sufficient room to build a covert channel by embedding covert information with a modulation scheme orthogonal to CSS. To demonstrate the feasibility of building a covert channel, we implement CloakLoRa. CloakLoRa embeds covert information into a regular LoRa packet by modulating the amplitudes of LoRa chirps while keeping the frequency intact. As amplitude modulation is orthogonal to CSS, a regular LoRa node receives the LoRa packet as if no secret information is embedded into the packet. Such an embedding method is transparent to all security mechanisms at upper layers in current LoRaWAN. As such, an attacker can create an amplitude modulated covert channel over LoRa without being detected by current LoRaWAN security mechanism. We conduct comprehensive evaluations with COTS LoRa nodes and receive-only software defined radios and experiment results show that CloakLoRa can send covert information over 250m.
2020-06-19
Novak, Marek, Skryja, Petr.  2019.  Efficient Partial Firmware Update for IoT Devices with Lua Scripting Interface. 2019 29th International Conference Radioelektronika (RADIOELEKTRONIKA). :1—4.

The paper introduces a method of efficient partial firmware update with several advantages compared to common methods. The amount of data to transfer for an update is reduced, the energetic efficiency is increased and as the method is designed for over the air update, the radio spectrum occupancy is decreased. Herein described approach uses Lua scripting interface to introduce updatable fragments of invokable native code. This requires a dedicated memory layout, which is herein introduced. This method allows not only to distribute patches for deployed systems, but also on demand add-ons. At the end, the security aspects of proposed firmware update system is discussed and its limitations are presented.

2018-01-10
Robyns, Pieter, Marin, Eduard, Lamotte, Wim, Quax, Peter, Singelée, Dave, Preneel, Bart.  2017.  Physical-layer Fingerprinting of LoRa Devices Using Supervised and Zero-shot Learning. Proceedings of the 10th ACM Conference on Security and Privacy in Wireless and Mobile Networks. :58–63.

Physical-layer fingerprinting investigates how features extracted from radio signals can be used to uniquely identify devices. This paper proposes and analyses a novel methodology to fingerprint LoRa devices, which is inspired by recent advances in supervised machine learning and zero-shot image classification. Contrary to previous works, our methodology does not rely on localized and low-dimensional features, such as those extracted from the signal transient or preamble, but uses the entire signal. We have performed our experiments using 22 LoRa devices with 3 different chipsets. Our results show that identical chipsets can be distinguished with 59% to 99% accuracy per symbol, whereas chipsets from different vendors can be fingerprinted with 99% to 100% accuracy per symbol. The fingerprinting can be performed using only inexpensive commercial off-the-shelf software defined radios, and a low sample rate of 1 Msps. Finally, we release all datasets and code pertaining to these experiments to the public domain.

2017-09-19
Bor, Martin C., Roedig, Utz, Voigt, Thiemo, Alonso, Juan M..  2016.  Do LoRa Low-Power Wide-Area Networks Scale? Proceedings of the 19th ACM International Conference on Modeling, Analysis and Simulation of Wireless and Mobile Systems. :59–67.

New Internet of Things (IoT) technologies such as Long Range (LoRa) are emerging which enable power efficient wireless communication over very long distances. Devices typically communicate directly to a sink node which removes the need of constructing and maintaining a complex multi-hop network. Given the fact that a wide area is covered and that all devices communicate directly to a few sink nodes a large number of nodes have to share the communication medium. LoRa provides for this reason a range of communication options (centre frequency, spreading factor, bandwidth, coding rates) from which a transmitter can choose. Many combination settings are orthogonal and provide simultaneous collision free communications. Nevertheless, there is a limit regarding the number of transmitters a LoRa system can support. In this paper we investigate the capacity limits of LoRa networks. Using experiments we develop models describing LoRa communication behaviour. We use these models to parameterise a LoRa simulation to study scalability. Our experiments show that a typical smart city deployment can support 120 nodes per 3.8 ha, which is not sufficient for future IoT deployments. LoRa networks can scale quite well, however, if they use dynamic communication parameter selection and/or multiple sinks.