Biblio

The use of rare-earth elements in permanent magnets rises economic, environmental and supply-chain related concerns. Instead, ferrite magnets have been researched as an alternative. The magnetic flux concentration capacity of the Spoke Type Permanent Magnet Synchronous Motor (PMSM) and the low magnetic remanence of the ferrite magnet make them complementary strategies towards the desirable performance. However, if restricted to conventional manufacturing processes and materials, the mechanical design is a challenging step of the development of these machines. This paper explores how mechanical constraints impact electromagnetic performance. To access the interdependency of the performance and the mechanical constraints, finite element analyses are done both in the mechanical and electromagnetic domain. The results show that the mechanical constraints have an impact on the performance, although it is possible to reduce it by adapting the design to the electromagnetic and mechanical properties of the electrical steel.

This article deals with the estimation of magnet losses in a permanent-magnet motor inserted in a nut-runner. This type of machine has interesting features such as being two-pole, slot-less and running at a high speed (30000 rpm). Two analytical models were chosen from the literature. A numerical estimation of the losses with 2D Finite Element Method was carried out. A detailed investigation of the effect of simulation settings (e.g., mesh size, time-step, remanence flux density in the magnet, superposition of the losses, etc.) was performed. Finally, calculation of losses with 3D-FEM were also run in order to compare the calculated losses with both analytical and 2D-FEM results. The estimation of the losses focuses on a range of frequencies between 10 and 100 kHz.