Visible to the public Biblio

Filters: Keyword is Bragg gratings  [Clear All Filters]
2020-12-21
Leff, D., Maskay, A., Cunha, M. P. da.  2020.  Wireless Interrogation of High Temperature Surface Acoustic Wave Dynamic Strain Sensor. 2020 IEEE International Ultrasonics Symposium (IUS). :1–4.
Dynamic strain sensing is necessary for high-temperature harsh-environment applications, including powerplants, oil wells, aerospace, and metal manufacturing. Monitoring dynamic strain is important for structural health monitoring and condition-based maintenance in order to guarantee safety, increase process efficiency, and reduce operation and maintenance costs. Sensing in high-temperature (HT), harsh-environments (HE) comes with challenges including mounting and packaging, sensor stability, and data acquisition and processing. Wireless sensor operation at HT is desirable because it reduces the complexity of the sensor connection, increases reliability, and reduces costs. Surface acoustic wave resonators (SAWRs) are compact, can operate wirelessly and battery-free, and have been shown to operate above 1000°C, making them a potential option for HT HE dynamic strain sensing. This paper presents wirelessly interrogated SAWR dynamic strain sensors operating around 288.8MHz at room temperature and tested up to 400°C. The SAWRs were calibrated with a high-temperature wired commercial strain gauge. The sensors were mounted onto a tapered-type Inconel constant stress beam and the assembly was tested inside a box furnace. The SAWR sensitivity to dynamic strain excitation at 25°C, 100°C, and 400°C was .439 μV/με, 0.363μV/με, and .136 μV/με, respectively. The experimental outcomes verified that inductive coupled wirelessly interrogated SAWRs can be successfully used for dynamic strain sensing up to 400°C.
2020-07-16
Gariano, John, Djordjevic, Ivan B..  2019.  Covert Communications-Based Information Reconciliation for Quantum Key Distribution Protocols. 2019 21st International Conference on Transparent Optical Networks (ICTON). :1—5.

The rate at which a secure key can be generated in a quantum key distribution (QKD) protocol is limited by the channel loss and the quantum bit-error rate (QBER). Increases to the QBER can stem from detector noise, channel noise, or the presence of an eavesdropper, Eve. Eve is capable of obtaining information of the unsecure key by performing an attack on the quantum channel or by listening to all discussion performed via a noiseless public channel. Conventionally a QKD protocol will perform the information reconciliation over the authenticated public channel, revealing the parity bits used to correct for any quantum bit errors. In this invited paper, the possibility of limiting the information revealed to Eve during the information reconciliation is considered. Using a covert communication channel for the transmission of the parity bits, secure key rates are possible at much higher QBERs. This is demonstrated through the simulation of a polarization based QKD system implementing the BB84 protocol, showing significant improvement of the SKRs over the conventional QKD protocols.

2018-03-05
Chang, C. H., Hu, C. H., Tsai, C. H., Hsieh, C. Y..  2017.  Three-Layer Ring Optical Fiber Sensing Network with Self-Healing Functionality. 2017 Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR). :1–2.

A novel optical fiber sensing network is proposed to eliminate the effect of multiple fiber failures. Simulation results show that if the number of breakpoint in each subnet is less than four, the optical routing paths can be reset to avoid those breakpoints by changing the status of optical switches in the remote nodes.