Biblio

Dynamic strain sensing is necessary for high-temperature harsh-environment applications, including powerplants, oil wells, aerospace, and metal manufacturing. Monitoring dynamic strain is important for structural health monitoring and condition-based maintenance in order to guarantee safety, increase process efficiency, and reduce operation and maintenance costs. Sensing in high-temperature (HT), harsh-environments (HE) comes with challenges including mounting and packaging, sensor stability, and data acquisition and processing. Wireless sensor operation at HT is desirable because it reduces the complexity of the sensor connection, increases reliability, and reduces costs. Surface acoustic wave resonators (SAWRs) are compact, can operate wirelessly and battery-free, and have been shown to operate above 1000°C, making them a potential option for HT HE dynamic strain sensing. This paper presents wirelessly interrogated SAWR dynamic strain sensors operating around 288.8MHz at room temperature and tested up to 400°C. The SAWRs were calibrated with a high-temperature wired commercial strain gauge. The sensors were mounted onto a tapered-type Inconel constant stress beam and the assembly was tested inside a box furnace. The SAWR sensitivity to dynamic strain excitation at 25°C, 100°C, and 400°C was .439 μV/με, 0.363μV/με, and .136 μV/με, respectively. The experimental outcomes verified that inductive coupled wirelessly interrogated SAWRs can be successfully used for dynamic strain sensing up to 400°C.

This paper is the first to investigate the long-term stability of Surface Acoustic Wave Gyroscopes (SAWG) using an ovenized control system. Monolithic integration of a MEMS heater adjacent to SAW devices on Lithium Niobate over insulator substrate (LNOI) tightly couples frequency-based temperature detection with heating for temperature and frequency stabilization. This first prototype demonstrates the ability to minimize the temperature variations of the SAWG to below ±10 μK and stabilize the SAWG resonance frequency to ±0.2 ppm. This approach thus eliminates the thermal drift in a SAWG and enables the development of a new generation of MEMS-based gyroscopes with long-term stability.

Surface acoustic wave (SAW) optical sensor based on two-dimensional (2D) sensing layer can always provide extremely high sensitivity. As an attractive option, the application of exfoliated 2D perovskite on acousto-optic coupling optical sensor is investigated. In this work, exfoliated 2D (PEA)2PbI4 sheet was transferred as a sensing layer onto the delay area of a dual-port SAW resonator with resonant frequency 497 MHz. From the response under 532 nm laser with intensity of 0.9 mW/cm2, a largest frequency shift of 13.92 MHz was observed. The ultrahigh sensitivity up to 31.6 ppm/(μW/cm2) was calculated by experiment results. We also carried out theoretical analysis and finite element simulation of 3D model to demonstrate the mechanism and validity for optical sensing. The fabricated optical sensor expressed great potential for a variety of optical applications.

We investigate directional differences when coupling Lamb waves in a structure to guided modes in an optical fiber sensor for detection of the ultrasonic wave propagation through the structure.