Biblio

Military supply chains play a critical role in the acquisition and movement of goods for defence purposes. The disruption of these supply chain processes can have potentially devastating affects to the operational capability of military forces. The introduction and integration of new technologies into defence supply chains can serve to increase their effectiveness. However, the benefits posed by these technologies may be outweighed by significant consequences to the cyber security of the entire defence supply chain. Supply chains are complex Systems of Systems, and the introduction of an insecure technology into such a complex ecosystem may induce cascading system-wide failure, and have catastrophic consequences to military mission assurance. Subsequently, there is a need for an evaluative process to determine the extent to which a new technology will affect the cyber security of military supply chains. This work proposes a new model, the Military Supply Chain Cyber Implications Model (M-SCCIM), that serves to aid military decision makers in understanding the potential cyber security impact of introducing new technologies to supply chains. M-SCCIM is a multiphase model that enables understanding of cyber security and supply chain implications through the lenses of theoretical examinations, pilot applications and system wide implementations.

A conventional visible light communication system consists of a transmitter, a jammer that includes a few light emitting diodes, a legal listener and an eavesdropper. In this work, a similar system is designed with a collimating lens in order to create an extra layer of practical physical security measure. The use of a collimating lens makes it available to spatially limiting data transmission to an area under the lensed transmitter. Also focused data transmission through the optical lens, increases the secrecy rate. To investigate the applicability of the proposed design we designed a sample experimental setup using USRP and implemented in a laboratory environment. In the proposed set up, the receiver is in a fixed position. However, it is possible to implement an easy, practical and cheap hardware solution with respect to a beamforming type VLC that uses directional beam forming method to establish transmission to a dynamic target. In addition, it is achievable to control the size of the area where a receiver can access data by manipulating the distance between the optical lens and transmitter.

As machine learning approaches are increasingly used to augment human decision-making, eXplainable Artificial Intelligence (XAI) research has explored methods for communicating system behavior to humans. However, these approaches often fail to account for the affective responses of humans as they interact with explanations. Facial affect analysis, which examines human facial expressions of emotions, is one promising lens for understanding how users engage with explanations. Therefore, in this work, we aim to (1) identify which facial affect features are pronounced when people interact with XAI interfaces, and (2) develop a multitask feature embedding for linking facial affect signals with participants' use of explanations. Our analyses and results show that the occurrence and values of facial AU1 and AU4, and Arousal are heightened when participants fail to use explanations effectively. This suggests that facial affect analysis should be incorporated into XAI to personalize explanations to individuals' interaction styles and to adapt explanations based on the difficulty of the task performed.

Wireless Network-on-Chip (WNoC) broadly adopts single channel for low overhead data transmission. Sharing of the channel among multiple wireless interfaces (WIs) is controlled by a channel access mechanism (CAM). Such CAM can be malfunctioned by a Hardware Trojan (HT) in a malicious WI or a rogue third party intellectual property (IP) core present on the same System-on-Chip (SoC). This may result in denial-of-service (DoS) or spoofing in WNoC leading to starvation of healthy WIs and under-utilization of wireless channel. Our work demonstrates possible threat model on CAM and proposes low overhead decentralized countermeasures for both DoS and spoofing attacks in WNoC.

This paper proposes a stream cipher algorithm. Its main principle is conducting the binary random dynamic hash with the help of key. At the same time of calculating the hash mapping address of plaintext, change the value of plaintext through bits scrambling, and then map it to the ciphertext space. This encryption method has strong randomness, and the design of hash functions and bits scrambling is flexible and diverse, which can constitute a set of encryption and decryption methods. After testing, the code evenness of the ciphertext obtained using this method is higher than that of the traditional method under some extreme conditions..

The e-government concept and healthcare have usually been studied separately. Even when and where both e-government and healthcare systems were combined in a study, the roles of e-government in healthcare have not been examined. As a result., the complementarity of the systems poses potential challenges. The interpretive approach was applied in this study. Existing materials in the areas of healthcare and e-government were used as data from a qualitative method viewpoint. Dimension of change from the perspective of the structuration theory was employed to guide the data analysis. From the analysis., six factors were found to be the main roles of e-government in the implementation and application of e-health in the delivering of healthcare services. An understanding of the roles of e-government promotes complementarity., which enhances the healthcare service delivery to the community.

Modbus over TCP/IP is one of the most popular industrial network protocol that are widely used in critical infrastructures. However, vulnerability of Modbus TCP protocol has attracted widely concern in the public. The traditional intrusion detection methods can identify some intrusion behaviors, but there are still some problems. In this paper, we present an innovative approach, SD-IDS (Stereo Depth IDS), which is designed for perform real-time deep inspection for Modbus TCP traffic. SD-IDS algorithm is composed of two parts: rule extraction and deep inspection. The rule extraction module not only analyzes the characteristics of industrial traffic, but also explores the semantic relationship among the key field in the Modbus TCP protocol. The deep inspection module is based on rule-based anomaly intrusion detection. Furthermore, we use the online test to evaluate the performance of our SD-IDS system. Our approach get a low rate of false positive and false negative.

3D imaging has been a hot research topic recently due to a high demand from various applications of security, health, autonomous vehicle and robotics. Yet Stereoscopic 3D imaging is limited due to its principles which mimics the human eye technique thus the camera separation baseline defines amount of 3D depth can be captured. Holoscopic 3D (H3D) Imaging is based on the “Fly's eye” technique that uses coherent replication of light to record a spatial image of a real scene using a microlens array (MLA) which gives the complete 3D parallax. H3D Imaging has been considered a promising 3D imaging technique which pursues the simple form of 3D acquisition using a single aperture camera therefore it is the most suited for scalable digitization, security and autonomous applications. This paper proposes 360-degree holoscopic 3D imaging system design for immersive 3D acquisition and stitching.

Acoustic microscopy is characterized by relatively long scanning time, which is required for the motion of the transducer over the entire scanning area. This time may be reduced by using a multi-channel acoustical system which has several identical transducers arranged as an array and is mounted on a mechanical scanner so that each transducer scans only a fraction of the total area. The resulting image is formed as a combination of all acquired partial data sets. The mechanical instability of the scanner, as well as the difference in parameters of the individual transducers causes a misalignment of the image fractures. This distortion may be partially compensated for by the introduction of constant or dynamical signal leveling and data shift procedures. However, a reduction of the random instability component requires more advanced algorithms, including auto-adjustment of processing parameters. The described procedure was implemented into the prototype of an ultrasonic fingerprint reading system. The specialized cylindrical scanner provides a helical spiral lens trajectory which eliminates repeatable acceleration, reduces vibration and allows constant data flow on maximal rate. It is equipped with an array of four spherically focused 50 MHz acoustic lenses operating in pulse-echo mode. Each transducer is connected to a separate channel including pulser, receiver and digitizer. The output 3D data volume contains interlaced B-scans coming from each channel. Afterward, data processing includes pre-determined procedures of constant layer shift in order to compensate for the transducer displacement, phase shift and amplitude leveling for compensation of variation in transducer characteristics. Analysis of statistical parameters of individual scans allows adaptive eliminating of the axial misalignment and mechanical vibrations. Further 2D correlation of overlapping partial C-scans will realize an interpolative adjustment which essentially improves the output image. Implementation of this adaptive algorithm into a data processing sequence allows us to significantly reduce misreading due to hardware noise and finger motion during scanning. The system provides a high quality acoustic image of the fingerprint including different levels of information: fingerprint pattern, sweat porous locations, internal dermis structures. These additional features can effectively facilitate fingerprint based identification. The developed principles and algorithm implementations allow improved quality, stability and reliability of acoustical data obtained with the mechanical scanner, accommodating several transducers. General principles developed during this work can be applied to other configurations of advanced ultrasonic systems designed for various biomedical and NDE applications. The data processing algorithm, developed for a specific biometric task, can be adapted for the compensation of mechanical imperfections of the other devices.