Biblio

The wireless communication is a backbone for a development of a nation. But spectrum is finite resource and issues like spectrum scarcity, loss of signal quality, transmission delay, raised in wireless communication system due to growth of wireless applications and exponentially increased number of users. Secondary use of a spectrum using Software Defined Radio (SDR) is one of the solutions which is also supported by TRAI. The spectrum sensing is key process in communication based on secondary use of spectrum. But energy consumption, added delay, primary users security are some threats in this system. Here in this paper we mainly focused on throughput optimization in secondary use of spectrum based on optimal sensing time and number of Secondary users during cooperative spectrum sensing in Cognitive radio networks.

The main challenge of ultra-reliable machine-to-machine (M2M) control applications is to meet the stringent timing and reliability requirements of control systems, despite the adverse properties of wireless communication for delay and packet errors, and limited battery resources of the sensor nodes. Since the transmission delay and energy consumption of a sensor node are determined by the transmission power and rate of that sensor node and the concurrently transmitting nodes, the transmission schedule should be optimized jointly with the transmission power and rate of the sensor nodes. Previously, it has been shown that the optimization of power control and rate adaptation for each node subset can be separately formulated, solved and then used in the scheduling algorithm in the optimal solution of the joint optimization of power control, rate adaptation and scheduling problem. However, the power control and rate adaptation problem has been only formulated and solved for continuous rate transmission model, in which Shannon's capacity formulation for an Additive White Gaussian Noise (AWGN) wireless channel is used in the calculation of the maximum achievable rate as a function of Signal-to-Interference-plus-Noise Ratio (SINR). In this paper, we formulate the power control and rate adaptation problem with the objective of minimizing the time required for the concurrent transmission of a set of sensor nodes while satisfying their transmission delay, reliability and energy consumption requirements based on the more realistic discrete rate transmission model, in which only a finite set of transmit rates are supported. We propose a polynomial time algorithm to solve this problem and prove the optimality of the proposed algorithm. We then combine it with the previously proposed scheduling algorithms and demonstrate its close to optimal performance via extensive simulations.

Smartphones are a new type of mobile devices that users can install additional mobile software easily. In the almost all smartphone applications, client-server model is used because end-to-end communication is prevented by NAT routers. Recently, some smartphone applications provide real time services such as voice and video communication, online games etc. In these applications, end-to-end communication is suitable to reduce transmission delay and achieve efficient network usage. Also, IP mobility and security are important matters. However, the conventional IP mobility mechanisms are not suitable for these applications because most mechanisms are assumed to be installed in OS kernel. We have developed a novel IP mobility mechanism called NTMobile (Network Traversal with Mobility). NTMobile supports end-to-end IP mobility in IPv4 and IPv6 networks, however, it is assumed to be installed in Linux kernel as with other technologies. In this paper, we propose a new type of end-to-end mobility platform that provides end-to-end communication, mobility, and also secure data exchange functions in the application layer for smartphone applications. In the platform, we use NTMobile, which is ported as the application program. Then, we extend NTMobile to be suitable for smartphone devices and to provide secure data exchange. Client applications can achieve secure end-to-end communication and secure data exchange by sharing an encryption key between clients. Users also enjoy IP mobility which is the main function of NTMobile in each application. Finally, we confirmed that the developed module can work on Android system and iOS system.
 

Smartphones are a new type of mobile devices that users can install additional mobile software easily. In the almost all smartphone applications, client-server model is used because end-to-end communication is prevented by NAT routers. Recently, some smartphone applications provide real time services such as voice and video communication, online games etc. In these applications, end-to-end communication is suitable to reduce transmission delay and achieve efficient network usage. Also, IP mobility and security are important matters. However, the conventional IP mobility mechanisms are not suitable for these applications because most mechanisms are assumed to be installed in OS kernel. We have developed a novel IP mobility mechanism called NTMobile (Network Traversal with Mobility). NTMobile supports end-to-end IP mobility in IPv4 and IPv6 networks, however, it is assumed to be installed in Linux kernel as with other technologies. In this paper, we propose a new type of end-to-end mobility platform that provides end-to-end communication, mobility, and also secure data exchange functions in the application layer for smartphone applications. In the platform, we use NTMobile, which is ported as the application program. Then, we extend NTMobile to be suitable for smartphone devices and to provide secure data exchange. Client applications can achieve secure end-to-end communication and secure data exchange by sharing an encryption key between clients. Users also enjoy IP mobility which is the main function of NTMobile in each application. Finally, we confirmed that the developed module can work on Android system and iOS system.