Biblio

This paper presents the development of a control circuit to enhance the performances of LED lamps. In this direction, a comparison between the luminous intensity of normal LED based lamps and mid-power ones, for both continuous and switching conditions has been made. The already well know control technologies were analyzed and a study was conducted to increase the lighting performances by rising the operating frequency and magnifying the contribution of remanence effect and thus increasing the efficiency of the light source. To achieve this, in the first stage of the project the power and control circuits have been modeled, related to desired parameters and tested in simulation software. In the second stage, the proposed circuit was implemented by functional blocks and in the last stage, tests were made on the circuit and on light sources in order to process the results. The power consumption has been decreased nearly to a half of it and the luminous flux raised with 15% due to overcurrent and remanence effect that we used.

This work proposes a scheme to detect, isolate and mitigate malicious disruption of electro-mechanical processes in legacy PLCs where each PLC works as a finite state machine (FSM) and goes through predefined states depending on the control flow of the programs and input-output mechanism. The scheme generates a group-signature for a particular state combining the signature shares from each of these PLCs using \$(k,\textbackslashtextbackslash l)\$-threshold signature scheme.If some of them are affected by the malicious code, signature can be verified by k out of l uncorrupted PLCs and can be used to detect the corrupted PLCs and the compromised state. We use OpenPLC software to simulate Legacy PLC system on Raspberry Pi and show İ/O\$ pin configuration attack on digital and pulse width modulation (PWM) pins. We describe the protocol using a small prototype of five instances of legacy PLCs simultaneously running on OpenPLC software. We show that when our proposed protocol is deployed, the aforementioned attacks get successfully detected and the controller takes corrective measures. This work has been developed as a part of the problem statement given in the Cyber Security Awareness Week-2017 competition.