Biblio

In this research we propose a framework that will strengthen the IoT devices security from dual perspectives; avoid devices to become attack target as well as a source of an attack. Unlike traditional devices, IoT devices are equipped with insufficient host-based defense system and a continuous internet connection. All time internet enabled devices with insufficient security allures the attackers to use such devices and carry out their attacks on rest of internet. When plethora of vulnerable devices become source of an attack, intensity of such attacks increases exponentially. Mirai was one of the first well-known attack that exploited large number of vulnerable IoT devices, that bring down a large part of Internet. To strengthen the IoT devices from dual security perspective, we propose a two step framework. Firstly, confine the communication boundary of IoT devices; IoT-Sphere. A sphere of IPs that are allowed to communicate with a device. Any communication that violates the sphere will be blocked at the gateway level. Secondly, only allowed communication will be evaluated for potential attacks and anomalies using advance detection engines. To show the effectiveness of our proposed framework, we perform couple of attacks on IoT devices; camera and google home and show the feasibility of IoT-Sphere.

This work presents a systematic analysis of symmetric encryption modes for SSH that are in use on the Internet, providing deployment statistics, new attacks, and security proofs for widely used modes. We report deployment statistics based on two Internet-wide scans of SSH servers conducted in late 2015 and early 2016. Dropbear and OpenSSH implementations dominate in our scans. From our first scan, we found 130,980 OpenSSH servers that are still vulnerable to the CBC-mode-specific attack of Albrecht et al. (IEEE S&P 2009), while we found a further 20,000 OpenSSH servers that are vulnerable to a new attack on CBC-mode that bypasses the counter-measures introduced in OpenSSH 5.2 to defeat the attack of Albrecht et al. At the same time, 886,449 Dropbear servers in our first scan are vulnerable to a variant of the original CBC-mode attack. On the positive side, we provide formal security analyses for other popular SSH encryption modes, namely ChaCha20-Poly1305, generic Encrypt-then-MAC, and AES-GCM. Our proofs hold for detailed pseudo-code descriptions of these algorithms as implemented in OpenSSH. Our proofs use a corrected and extended version of the "fragmented decryption" security model that was specifically developed for the SSH setting by Boldyreva et al. (Eurocrypt 2012). These proofs provide strong confidentiality and integrity guarantees for these alternatives to CBC-mode encryption in SSH. However, we also show that these alternatives do not meet additional, desirable notions of security (boundary-hiding under passive and active attacks, and denial-of-service resistance) that were formalised by Boldyreva et al.

This work presents a systematic analysis of symmetric encryption modes for SSH that are in use on the Internet, providing deployment statistics, new attacks, and security proofs for widely used modes. We report deployment statistics based on two Internet-wide scans of SSH servers conducted in late 2015 and early 2016. Dropbear and OpenSSH implementations dominate in our scans. From our first scan, we found 130,980 OpenSSH servers that are still vulnerable to the CBC-mode-specific attack of Albrecht et al. (IEEE S&P 2009), while we found a further 20,000 OpenSSH servers that are vulnerable to a new attack on CBC-mode that bypasses the counter-measures introduced in OpenSSH 5.2 to defeat the attack of Albrecht et al. At the same time, 886,449 Dropbear servers in our first scan are vulnerable to a variant of the original CBC-mode attack. On the positive side, we provide formal security analyses for other popular SSH encryption modes, namely ChaCha20-Poly1305, generic Encrypt-then-MAC, and AES-GCM. Our proofs hold for detailed pseudo-code descriptions of these algorithms as implemented in OpenSSH. Our proofs use a corrected and extended version of the "fragmented decryption" security model that was specifically developed for the SSH setting by Boldyreva et al. (Eurocrypt 2012). These proofs provide strong confidentiality and integrity guarantees for these alternatives to CBC-mode encryption in SSH. However, we also show that these alternatives do not meet additional, desirable notions of security (boundary-hiding under passive and active attacks, and denial-of-service resistance) that were formalised by Boldyreva et al.

Wireless Sensor Network is the combination of small devices called sensor nodes, gateways and software. These nodes use wireless medium for transmission and are capable to sense and transmit the data to other nodes. Generally, WSN composed of two types of nodes i.e. generic nodes and gateway nodes. Generic nodes having the ability to sense while gateway nodes are used to route that information. IoT now extended to IoET (internet of Everything) to cover all electronics exist around, like a body sensor networks, VANET's, smart grid stations, smartphone, PDA's, autonomous cars, refrigerators and smart toasters that can communicate and share information using existing network technologies. The sensor nodes in WSN have very limited transmission range as well as limited processing speed, storage capacities and low battery power. Despite a wide range of applications using WSN, its resource constrained nature given birth to a number severe security attacks e.g. Selective Forwarding attack, Jamming-attack, Sinkhole attack, Wormhole attack, Sybil attack, hello Flood attacks, Grey Hole, and the most dangerous BlackHole Attacks. Attackers can easily exploit these vulnerabilities to compromise the WSN network.

The security level is very important in Bluetooth, because the network or devices using secure communication, are susceptible to many attacks against the transmitted data received through eavesdropping. The cryptosystem designers needs to know the complexity of the designed Bluetooth E0. And what the advantages given by any development performed on any known Bluetooth E0Encryption method. The most important criteria can be used in evaluation method is considered as an important aspect. This paper introduce a proposed fuzzy logic technique to evaluate the complexity of Bluetooth E0Encryption system by choosing two parameters, which are entropy and correlation rate, as inputs to proposed fuzzy logic based Evaluator, which can be applied with MATLAB system.

Security down to hardware (HW) has become a fundamental requirement in highly-connected and ubiquitously deployed systems, as a result of the recent discovery of a wide range of vulnerabilities in commercial devices, as well as the affordability of several attacks that were traditionally considered unlikely. HW security is now a fundamental requirement in view of the massive attack surface that they expose, and the substantial power penalty entailed by solutions at higher levels of abstraction.In large-scale networks of connected devices, attacks need to be counteracted at low cost down to individual nodes, which need to be identified or authenticated securely, and protect confidentiality and integrity of the data that is sensed, stored, processed and wirelessly exchanged. In many security-sensitive applications, physical attacks against individual chips need to be counteracted to truly enable an end-to-end chain of trust from nodes to cloud and actuation (i.e., always-on security). These requirements have motivated the on-going global research and development effort to assure hardware security at low cost and power penalty down to low-end devices (i.e., ubiquitous security).This paper provides a fresh overview of the fundamentals, the design requirements and the state of the art in primitives for HW security. Challenges and future directions are discussed using recent silicon demonstrations as case studies.

Bluetooth (BR/EDR) is a pervasive technology for wireless communication used by billions of devices. The Bluetooth standard includes a legacy authentication procedure and a secure authentication procedure, allowing devices to authenticate to each other using a long term key. Those procedures are used during pairing and secure connection establishment to prevent impersonation attacks. In this paper, we show that the Bluetooth specification contains vulnerabilities enabling to perform impersonation attacks during secure connection establishment. Such vulnerabilities include the lack of mandatory mutual authentication, overly permissive role switching, and an authentication procedure downgrade. We describe each vulnerability in detail, and we exploit them to design, implement, and evaluate master and slave impersonation attacks on both the legacy authentication procedure and the secure authentication procedure. We refer to our attacks as Bluetooth Impersonation AttackS (BIAS).Our attacks are standard compliant, and are therefore effective against any standard compliant Bluetooth device regardless the Bluetooth version, the security mode (e.g., Secure Connections), the device manufacturer, and the implementation details. Our attacks are stealthy because the Bluetooth standard does not require to notify end users about the outcome of an authentication procedure, or the lack of mutual authentication. To confirm that the BIAS attacks are practical, we successfully conduct them against 31 Bluetooth devices (28 unique Bluetooth chips) from major hardware and software vendors, implementing all the major Bluetooth versions, including Apple, Qualcomm, Intel, Cypress, Broadcom, Samsung, and CSR.

In this paper, a novel DNA based computing method is proposed for encryption of biometric color(face)and gray fingerprint images. In many applications of present scenario, gray and color images are exhibited major role for authenticating identity of an individual. The values of aforementioned images have considered as two separate matrices. The key generation process two level mathematical operations have applied on fingerprint image for generating encryption key. For enhancing security to biometric image, DNA computing has done on the above matrices generating DNA sequence. Further, DNA sequences have scrambled to add complexity to biometric image. Results of blending images, image of DNA computing has shown in experimental section. It is observed that the proposed substitution DNA computing algorithm has shown good resistant against statistical and differential attacks.

The increasing use of Information Technology applications in the distributed environment is increasing security exploits. Information about vulnerabilities is also available on the open web in an unstructured format that developers can take advantage of to fix vulnerabilities in their IT applications. SQL injection (SQLi) attacks are frequently launched with the objective of exfiltration of data typically through targeting the back-end server organisations to compromise their customer databases. There have been a number of high profile attacks against large enterprises in recent years. With the ever-increasing growth of online trading, it is possible to see how SQLi attacks can continue to be one of the leading routes for cyber-attacks in the future, as indicated by findings reported in OWASP. Various machine learning and deep learning algorithms have been applied to detect and prevent these attacks. However, such preventive attempts have not limited the incidence of cyber-attacks and the resulting compromised database as reported by (CVE) repository. In this paper, the potential of using data mining approaches is pursued in order to enhance the efficacy of SQL injection safeguarding measures by reducing the false-positive rates in SQLi detection. The proposed approach uses CountVectorizer to extract features and then apply various supervised machine-learning models to automate the classification of SQLi. The model that returns the highest accuracy has been chosen among available models. Also a new model has been created PALOSDM (Performance analysis and Iterative optimisation of the SQLI Detection Model) for reducing false-positive rate and false-negative rate. The detection rate accuracy has also been improved significantly from a baseline of 94% up to 99%.

In this paper a model of secure wireless sensor network (WSN) was developed. This model is able to defend against most of known network attacks and don't significantly reduce the energy power of sensor nodes (SN). We propose clustering as a way of network organization, which allows reducing energy consumption. Network protection is based on the trust level calculation and the establishment of trusted relationships between trusted nodes. The primary purpose of the hierarchical trust management system (HTMS) is to protect the WSN from malicious actions of an attacker. The developed system should combine the properties of energy efficiency and reliability. To achieve this goal the following tasks are performed: detection of illegal actions of an intruder; blocking of malicious nodes; avoiding of malicious attacks; determining the authenticity of nodes; the establishment of trusted connections between authentic nodes; detection of defective nodes and the blocking of their work. The HTMS operation based on the use of Bayes' theorem and calculation of direct and centralized trust values.

The purpose of this work is to analyze the security model of a robotized system, to analyze the approaches to assessing the security of this system, and to develop our own framework. The solution to this problem involves the use of developed frameworks. The analysis will be conducted on a robotic system of robots. The prefix structures assume that the robotic system is divided into levels, and after that it is necessary to directly protect each level. Each level has its own characteristics and drawbacks that must be considered when developing a security system for a robotic system.

Rapid multiplication of electric vehicles requires the implementation of a new infrastructure to sustain their operations. For instance, charging these vehicles batteries necessitates a connection that allows information exchanges between vehicle and infrastructure. These exchanges are managed by a network called V2G (Vehicle to Grid), which is governed by the ISO 15118 standard. This last recommends the use of X.509 hierarchical PKI to protect the network communications against attacks. Although several authors have identified and criticized the shortcomings of this proposal, but no one provides a robust and effective remedial solution to alleviate them. This paper proposes an efficient protocol that addresses these shortcomings while respecting the concepts of the ISO 15118 standard. It fulfills the most important security requirements i.e. confidentiality, anonymity, integrity and non-repudiation. The validity and effectiveness of the proposed protocol were confirmed using the formal modeling tool Tamarin Prover and the RISE- V2G simulator.

We give attacks on Feistel-based format-preserving encryption (FPE) schemes that succeed in message recovery (not merely distinguishing scheme outputs from random) when the message space is small. For \$4\$-bit messages, the attacks fully recover the target message using \$2textasciicircum1 examples for the FF3 NIST standard and \$2textasciicircum5 examples for the FF1 NIST standard. The examples include only three messages per tweak, which is what makes the attacks non-trivial even though the total number of examples exceeds the size of the domain. The attacks are rigorously analyzed in a new definitional framework of message-recovery security. The attacks are easily put out of reach by increasing the number of Feistel rounds in the standards.

Mobile Ad Hoc Network (MANET) technology provides intercommunication between different nodes where no infrastructure is available for communication. MANET is attracting many researcher attentions as it is cost effective and easy for implementation. Main challenging aspect in MANET is its vulnerability. In MANET nodes are very much vulnerable to attacks along with its data as well as data flowing through these nodes. One of the main reasons of these vulnerabilities is its communication policy which makes nodes interdependent for interaction and data flow. This mutual trust between nodes is exploited by attackers through injecting malicious node or replicating any legitimate node in MANET. One of these attacks is blackhole attack. In this study, the behavior of blackhole attack is discussed and have proposed a lightweight solution for blackhole attack which uses inbuilt functions.

Distributed Denial-of-Service (DDoS) attacks aim to cause downtime or a lack of responsiveness for web services. DDoS attacks targeting the application layer are amongst the hardest to catch as they generally appear legitimate at lower layers and attempt to take advantage of common application functionality or aspects of the HTTP protocol, rather than simply send large amounts of traffic like with volumetric flooding. Attacks can focus on functionality such as database operations, file retrieval, or just general backend code. In this paper, we examine common forms of application layer attacks, preventative and detection measures, and take a closer look specifically at HTTP Flooding attacks by the High Orbit Ion Cannon (HOIC) and “low and slow” attacks through slowloris.

Accurate, precise, and unambiguous definitions of software weaknesses (bugs) and clear descriptions of software vulnerabilities are vital for building the foundations of cybersecurity. The Bugs Framework (BF) comprises rigorous definitions and (static) attributes of bug classes, along with their related dynamic properties, such as proximate, secondary and tertiary causes, consequences, and sites. This paper presents an overview of previously developed BF classes and the new cryptography related classes: Encryption Bugs (ENC), Verification Bugs (VRF), and Key Management Bugs (KMN). We analyze corresponding vulnerabilities and provide their clear descriptions by applying the BF taxonomy. We also discuss the lessons learned and share our plans for expanding BF.

We address security and trust in the context of a commercial IP camera. We take a hands-on approach, as we not only define abstract vulnerabilities, but we actually implement the attacks on a real camera. We then discuss the nature of the attacks and the root cause; we propose a formal model of trust that can be used to address the vulnerabilities by explicitly constraining compositionality for trust relationships.

BootJacker is a proof-of-concept attack tool which demonstrates that authentication mechanisms employed by an operating system can be bypassed by obtaining physical access and simply forcing a restart. The key insight that enables this attack is that the contents of memory on some machines are fully preserved across a warm boot. Upon a reboot, BootJacker uses this residual memory state to revive the original host operating system environment and run malicious payloads. Using BootJacker, an attacker can break into a locked user session and gain access to open encrypted disks, web browser sessions or other secure network connections. BootJacker's non-persistent design makes it possible for an attacker to leave no traces on the victim machine.

Cyber-physical systems (CPS) consist of sensors, actuators, and controllers all communicating over a network; if any subset becomes compromised, an attacker could cause significant damage. With access to data logs and a model of the CPS, the physical effects of an attack could potentially be detected before any damage is done. Manually building a model that is accurate enough in practice, however, is extremely difficult. In this paper, we propose a novel approach for constructing models of CPS automatically, by applying supervised machine learning to data traces obtained after systematically seeding their software components with faults ("mutants"). We demonstrate the efficacy of this approach on the simulator of a real-world water purification plant, presenting a framework that automatically generates mutants, collects data traces, and learns an SVM-based model. Using cross-validation and statistical model checking, we show that the learnt model characterises an invariant physical property of the system. Furthermore, we demonstrate the usefulness of the invariant by subjecting the system to 55 network and code-modification attacks, and showing that it can detect 85% of them from the data logs generated at runtime.

Video surveillance, closed-circuit TV and IP-camera systems became virtually omnipresent and indispensable for many organizations, businesses, and users. Their main purpose is to provide physical security, increase safety, and prevent crime. They also became increasingly complex, comprising many communication means, embedded hardware and non-trivial firmware. However, most research to date focused mainly on the privacy aspects of such systems, and did not fully address their issues related to cyber-security in general, and visual layer (i.e., imagery semantics) attacks in particular. In this paper, we conduct a systematic review of existing and novel threats in video surveillance, closed-circuit TV and IP-camera systems based on publicly available data. The insights can then be used to better understand and identify the security and the privacy risks associated with the development, deployment and use of these systems. We study existing and novel threats, along with their existing or possible countermeasures, and summarize this knowledge into a comprehensive table that can be used in a practical way as a security checklist when assessing cyber-security level of existing or new CCTV designs and deployments. We also provide a set of recommendations and mitigations that can help improve the security and privacy levels provided by the hardware, the firmware, the network communications and the operation of video surveillance systems. We hope the findings in this paper will provide a valuable knowledge of the threat landscape that such systems are exposed to, as well as promote further research and widen the scope of this field beyond its current boundaries.

In the development of smart cities across the world VANET plays a vital role for optimized route between source and destination. The VANETs is based on infra-structure less network. It facilitates vehicles to give information about safety through vehicle to vehicle communication (V2V) or vehicle to infrastructure communication (V2I). In VANETs wireless communication between vehicles so attackers violate authenticity, confidentiality and privacy properties which further effect security. The VANET technology is encircled with security challenges these days. This paper presents overview on VANETs architecture, a related survey on VANET with major concern of the security issues. Further, prevention measures of those issues, and comparative analysis is done. From the survey, found out that encryption and authentication plays an important role in VANETS also some research direction defined for future work.

This paper presents a review on how to benefit from software-defined networking (SDN) to enhance smart grid security. For this purpose, the attacks threatening traditional smart grid systems are classified according to availability, integrity, and confidentiality, which are the main cyber-security objectives. The traditional smart grid architecture is redefined with SDN and a conceptual model for SDN-based smart grid systems is proposed. SDN based solutions to the mentioned security threats are also classified and evaluated. Our conclusions suggest that SDN helps to improve smart grid security by providing real-time monitoring, programmability, wide-area security management, fast recovery from failures, distributed security and smart decision making based on big data analytics.

The paper proposes a method for solving problems of classifying multi-step attacks on wireless sensor networks in the conditions of uncertainty (incompleteness and inconsistency) of the observed signs of attacks. The method aims to eliminate the uncertainty of classification of attacks on networks of this class one the base of the use of neural network approaches to the processing of incomplete and contradictory knowledge on possible attack characteristics. It allows increasing objectivity (accuracy and reliability) of information security monitoring in modern software and hardware systems and Internet of Things networks that actively exploit advantages of wireless sensor networks.

Cloud computing provides so many groundbreaking advantages over native computing servers like to improve capacity and decrease costs, but meanwhile, it carries many security issues also. In this paper, we find the feasible security attacks made about cloud computing, including Wrapping, Browser Malware-Injection and Flooding attacks, and also problems caused by accountability checking. We have also analyzed the honey pot attack and its procedural intrusion way into the system. This paper on overall deals with the most common security breaches in cloud computing and finally honey pot, in particular, to analyze its intrusion way. Our major scope is to do overall security, analyze in the cloud and then to take up with a particular attack to deal with granular level. Honey pot is the one such attack that is taken into account and its intrusion policies are analyzed. The specific honey pot algorithm is in the queue as the extension of this project in the future.

Modern critical infrastructures such as Smart Grids (SGs) rely heavily on Information and Communication Technology (ICT) systems to monitor and control operations and states within large-scale facilities. The potential offered by SGs includes an effective integration of renewables, a demand-response action and a dynamic pricing system. The increasing use of ICT for the communication infrastructure of modern power systems offers advantages but can give rise to cyber attacks that compromise the security of the SG. To deal efficiently with the security concerns of SGs, a survey of the different attacks that consider the physical as well as the cyber characteristics of modern power grids is required. In the present paper, first the specific differences between SGs with respect to both Information Technology (IT) systems and conventional energy grids are discussed. Thereafter, the specific security requirements of SGs are presented in order to raise awareness of the new security challenges. Finally, a new classification of cyber attacks, based on the architecture of the SG, is proposed and details for each category are provided. The new classification is distinguished by its focus on the cyber-physical security of the SG in particular, which gives a comprehensive overview of the different threats. Thus, this new classification forms the necessary knowledge-basis for the design of respective countermeasures.