Biblio

At present, the acoustic emission (AE) method has the advantages of live measurement and easy fault location, so it is very suitable for insulation defect detection of power equipments such as GIS, etc. While the conventional AE detection system or instruments always can't give a right discrimination result, because them always work based on the reference voltage or phase information from an auxiliary 220V voltage signal source rather than the operation high voltage (HV) with the real phase information corresponding to the detected AE pulsed signals. So there is a random phase difference between the reference phase and operation phase. The discharge fingerprint formed by the detected AE pulsed signals with reference phase using the same processing process is compared to the discharge fingerprint database formed in the HV laboratory with the real phase information, therefore, the system may not be able to discriminate the discharge mode of the field measured data from GIS in substation operation. In this paper, in order to design and develop a general fast analysis algorithm model for PD acoustic detection system to make an assistant diagnosis, the pattern identification with phase compensation was designed and applied. The results show that the method is effective and useful to deatl with AE signals meased in operation situation.

At present, the AE method has the advantages of live measurement, online monitoring and easy fault location, so it is very suitable for insulation defect detection of power equipments such as GIS, etc. In this paper, development of a data processing software for PD acoustic detection based on a general fast analysis algorithm model is introduced. With considering the signal flow chart of current acoustic detection system widely used in operation and maintenance of power system equipments, the main function of the developed PD AE signals analysis software was designed, including the detailed analysis of individual data file, identification with phase compensation based on 2D PRPD histograms, batch processing analysis of data files, management of discharge fingerprint library and display of typical defect discharge data. And all of the corresponding developed software pages are displayed.