Biblio

In recent years, there have been situations in which the zero-sequence protection of the transformer has been incorrectly operated due to the converter transformer energizing or fault recovery. For converter transformers, maloperation may also occur. However, there is almost no theoretical research on the zero-mode inrush currents of converter transformers. This paper studies the characteristics of the zero-mode inrush currents of the converter transformers, including the relationship between the amplitude and attenuation characteristics of the zero-mode inrush currents of converter transformers, and their relationship with the system resistance, remanence, and closing angle. First, based on the T-type equivalent circuit of the transformer, the equivalent circuit of the zero-mode inrush current of each transformer is obtained. On this basis, the amplitude relationship of the zero-mode inrush currents of different converter transformers is obtained: the zero-mode inrush current of the energizing pole YY transformer becomes larger than the YD transformer, the energized pole YD becomes greater than the YY transformer, and the YY transformer zero-mode inrush current rises from 0. It is also analyzed that the sympathetic interaction will make the attenuation of the converter transformer zero-mode inrush current slower. The system resistance mainly affects the initial attenuation speed, and the later attenuation speed is mainly determined by the converter transformer leakage reactance. Finally, PSCAD modeling and simulation are carried out to verify the accuracy of the theoretical analysis.

Smart environments and security systems require automatic detection of human behaviors including approaching to or departing from an object. Existing human motion detection systems usually require human beings to carry special devices, which limits their applications. In this paper, we present a system called APID to detect arm reaching by analyzing backscatter communication signals from a passive RFID tag on the object. APID does not require human beings to carry any device. The idea is based on the influence of human movements to the vibration of backscattered tag signals. APID is compatible with commodity off-the-shelf devices and the EPCglobal Class-1 Generation-2 protocol. In APID an commercial RFID reader continuously queries tags through emitting RF signals and tags simply respond with their IDs. A USRP monitor passively analyzes the communication signals and reports the approach and departure behaviors. We have implemented the APID system for both single-object and multi-object scenarios in both horizontal and vertical deployment modes. The experimental results show that APID can achieve high detection accuracy.