Biblio

The digitalization of safety-critical railroad infrastructure enables new types of attacks. This increases the need to integrate Information Technology (IT) security measures into railroad systems. For that purpose, we rely on a security architecture for a railway object controller which controls field elements that we developed in previous work. Our architecture enables the integration of security mechanisms into a safety-certified railway system. In this paper, we demonstrate the practical feasibility of our architecture by using a Trusted Platform Module (TPM) 2.0 and a Multiple Independent Levels of Safety and Security (MILS) Separation Kernel (SK) for our implementation. Our evaluation includes a test bed and shows how certification and homologation can be achieved.

This work examines volatile memory modules as ephemeral key storage for security applications in the context of low temperatures. In particular, we note that such memories exhibit a rising level of data remanence as the temperature decreases, especially for temperatures below 280 Kelvin. Therefore, these memories cannot be used to protect the superconducting modules found in high-speed Magnetic Levitation (MagLev) trains, as such modules most often require extremely low temperatures in order to provide superconducting applications. Thus, a novel secure storage solution is required in this case, especially within the oncoming framework concept of the internet of railway things, which is partially based on the increasing utilisation of commercial off-the-shelf components and potential economies of scale, in order to achieve cost efficiency and, thus, widespread adoption. Nevertheless, we do note that volatile memory modules can be utilised as intrinsic temperature sensors, especially at low temperatures, as the data remanence they exhibit at low temperatures is highly dependent on the ambient temperature, and can, therefore, be used to distinguish between different temperature levels.

With the recent advent of the Internet of Things (IoT), embedded devices increasingly operate collaboratively in autonomous networks. A key technique to guard the secure and safe operation of connected embedded devices is remote attestation. It allows a third party, the verifier, to ensure the integrity of a remote device, the prover. Unfortunately, existing attestation protocols are impractical when applied in autonomous networks of embedded systems due to their limited scalability, performance, robustness, and security guarantees. In this work, we propose PASTA, a novel attestation protocol that is particularly suited for autonomous embedded systems. PASTA is the first that (i) enables many low-end prover devices to attest their integrity towards many potentially untrustworthy low-end verifier devices, (ii) is fully decentralized, thus, able to withstand network disruptions and arbitrary device outages, and (iii) is in addition to software attacks capable of detecting physical attacks in a much more robust way than any existing protocol. We implemented our protocol, conducted measurements, and simulated large networks. The results show that PASTA is practical on low-end embedded devices, scales to large networks with millions of devices, and improves robustness by multiple orders of magnitude compared with the best existing protocols.

IPTV is capable of providing recommendations for upcoming TV programs based on consumer feedback. With the increasing popularity and performance of recommender systems, risks of user privacy breach emerge. Although several works about privacy-preserving designs of recommender systems exist in the literature, a detailed analysis of the current state-of-the-art regarding privacy as well as an investigation of the usability aspects of such systems, so far, have not received consideration. In this paper, we survey current approaches for recommender systems by studying their privacy and usability properties in the context of IPTV.

Oblivious RAM is a cryptographic primitive that embodies one of the cornerstones of privacy-preserving technologies for database protection. While any Oblivious RAM (ORAM) construction offers access pattern hiding, there does not seem to be a construction that is safe against the potential leakage due to knowledge about the number of accesses performed by a client. Such leakage constitutes a privacy violation, as client data may be stored in a domain specific fashion. In this work, we examine this leakage by considering an adversary that can probe the server that stores an ORAM database, and who takes regular snapshots of it. We show that even against such a weak adversary, no major ORAM architecture is resilient, except for the trivial case, where the client scans the whole database in order to access a single element. In fact, we argue that constructing a non-trivial ORAM that is formally resilient seems impossible. Moreover, we quantify the leakage of different constructions to show which architecture offers the best privacy in practice.

In this paper we examine the use of covert channels based on CPU load in order to achieve persistent user identification through browser sessions. In particular, we demonstrate that an HTML5 video, a GIF image, or CSS animations on a webpage can be used to force the CPU to produce a sequence of distinct load levels, even without JavaScript or any client-side code. These load levels can be then captured either by another browsing session, running on the same or a different browser in parallel to the browsing session we want to identify, or by a malicious app installed on the device. To get a good estimation of the CPU load caused by the target session, the receiver can observe system statistics about CPU activity (app), or constantly measure time it takes to execute a known code segment (app and browser). Furthermore, for mobile devices we propose a sensor-based approach to estimate the CPU load, based on exploiting disturbances of the magnetometer sensor data caused by the high CPU activity. Captured loads can be decoded and translated into an identifying bit string, which is transmitted back to the attacker. Due to the way loads are produced, these methods are applicable even in highly restrictive browsers, such as the Tor Browser, and run unnoticeably to the end user. Therefore, unlike existing ways of web tracking, our methods circumvent most of the existing countermeasures, as they store the identifying information outside the browsing session being targeted. Finally, we also thoroughly evaluate and assess each presented method of generating and receiving the signal, and provide an overview of potential countermeasures.

Microblogging is a popular activity within the spectrum of Online Social Networking (OSN), which allows users to quicky exchange short messages. Such systems can be based on mobile clients that exchange their group-encrypted messages utilizing local communications such as Bluetooth. Since however in such cases, users do not want to disclose their group memberships, and thus have to wait for other group members to appear in the proximity, the message spread can be slow to non-existent. In this paper, we solve this problem and facilitate a higher message spread by employing a server that stores the messages of multiple groups in an Oblivious RAM (ORAM) data structure. The server can be accessed by the clients on demand to read or write their group-encrypted messages. Thus our solution can be used to add access pattern privacy on top of existing microblogging peer-2-peer architectures, and using an ORAM is a promising candidate to use in the given application scenario.

Microdata is collected by companies in order to enhance their quality of service as well as the accuracy of their recommendation systems. These data often become publicly available after they have been sanitized. Recent reidentification attacks on publicly available, sanitized datasets illustrate the privacy risks involved in microdata collections. Currently, users have to trust the provider that their data will be safe in case data is published or if a privacy breach occurs. In this work, we empower users by developing a novel, user-centric tool for privacy measurement and a new lightweight privacy metric. The goal of our tool is to estimate users' privacy level prior to sharing their data with a provider. Hence, users can consciously decide whether to contribute their data. Our tool estimates an individuals' privacy level based on published popularity statistics regarding the items in the provider's database, and the users' microdata. In this work, we describe the architecture of our tool as well as a novel privacy metric, which is necessary for our setting where we do not have access to the provider's database. Our tool is user friendly, relying on smart visual results that raise privacy awareness. We evaluate our tool using three real world datasets, collected from major providers. We demonstrate strong correlations between the average anonymity set per user and the privacy score obtained by our metric. Our results illustrate that our tool which uses minimal information from the provider, estimates users' privacy levels comparably well, as if it had access to the actual database.

Browser fingerprinting is a widely used technique to uniquely identify web users and to track their online behavior. Until now, different tools have been proposed to protect the user against browser fingerprinting. However, these tools have usability restrictions as they deactivate browser features and plug-ins (like Flash) or the HTML5 canvas element. In addition, all of them only provide limited protection, as they randomize browser settings with unrealistic parameters or have methodical flaws, making them detectable for trackers. In this work we demonstrate the first anti-fingerprinting strategy, which protects against Flash fingerprinting without deactivating it, provides robust and undetectable anti-canvas fingerprinting, and uses a large set of real word data to hide the actual system and browser properties without losing usability. We discuss the methods and weaknesses of existing anti-fingerprinting tools in detail and compare them to our enhanced strategies. Our evaluation against real world fingerprinting tools shows a successful fingerprinting protection in over 99% of 70.000 browser sessions.

Ethernet technology dominates enterprise and home network installations and is present in datacenters as well as parts of the backbone of the Internet. Due to its wireline nature, Ethernet networks are often assumed to intrinsically protect the exchanged data against attacks carried out by eavesdroppers and malicious attackers that do not have physical access to network devices, patch panels and network outlets. In this work, we practically evaluate the possibility of wireless attacks against wired Ethernet installations with respect to resistance against eavesdropping by using off-the-shelf software-defined radio platforms. Our results clearly indicate that twisted-pair network cables radiate enough electromagnetic waves to reconstruct transmitted frames with negligible bit error rates, even when the cables are not damaged at all. Since this allows an attacker to stay undetected, it urges the need for link layer encryption or physical layer security to protect confidentiality.