Biblio

We propose a multi-level CSI quantization and key reconciliation scheme for physical layer security. The noisy wireless channel estimates obtained by the users first run through a transformation, prior to the quantization step. This enables the definition of guard bands around the quantization boundaries, tailored for a specific efficiency and not compromising the uniformity required at the output of the quantizer. Our construction results in an better key disagreement and initial key generation rate trade-off when compared to other level-crossing quantization methods.

A lot of research in security of cyber physical systems focus on threat models where an attacker can spoof sensor readings by compromising the communication channel. A little focus is given to attacks on physical components. In this paper a method to detect potential attacks on physical components in a Cyber Physical System (CPS) is proposed. Physical attacks are detected through a comparison of noise pattern from sensor measurements to a reference noise pattern. If an adversary has physically modified or replaced a sensor, the proposed method issues an alert indicating that a sensor is probably compromised or is defective. A reference noise pattern is established from the sensor data using a deterministic model. This pattern is referred to as a fingerprint of the corresponding sensor. The fingerprint so derived is used as a reference to identify measured data during the operation of a CPS. Extensive experimentation with ultrasonic level sensors in a realistic water treatment testbed point to the effectiveness of the proposed fingerprinting method in detecting physical attacks.

RFID (Radio Frequency Identification) systems are emerging as one of the most pervasive computing technologies in history due to their low cost and their broad applicability. Latest technologies have brought costs down and standards are being developed. Actually, RFID is mostly used as a medium for numerous tasks including managing supply chains, tracking livestock, preventing counterfeiting, controlling building access, and supporting automated checkout. The use of RFID is limited by security concerns and delays in standardization. This paper presents some research done on RFID, the RFID applications and RFID data security.

Salt and Pepper Noise is very common during transmission of images through a noisy channel or due to impairment in camera sensor module. For noise removal, methods have been proposed in literature, with two stage cascade various configuration. These methods, can remove low density impulse noise, are not suited for high density noise in terms of visible performance. We propose an efficient method for removal of high as well as low density impulse noise. Our approach is based on novel extension over iterated conditional modes (ICM). It is cascade configuration of two stages - noise detection and noise removal. Noise detection process is a combination of iterative decision based approach, while noise removal process is based on iterative noisy pixel estimation. Using improvised approach, up to 95% corrupted image have been recovered with good results, while 98% corrupted image have been recovered with quite satisfactory results. To benchmark the image quality, we have considered various metrics like PSNR (Peak Signal to Noise Ratio), MSE (Mean Square Error) and SSIM (Structure Similarity Index Measure).

This paper reviews some existing Speech Enhancement techniques and also proposes a new method for enhancing the speech by combining Compressed Sensing and Kalman filter approaches. This approach is based on reconstruction of noisy speech signal using Compressive Sampling Matching Pursuit (CoSaMP) algorithm and further enhanced by Kalman filter. The performance of the proposed method is evaluated and compared with that of the existing techniques in terms of intelligibility and quality measure parameters of speech. The proposed algorithm shows an improved performance compared to Spectral Subtraction, MMSE, Wiener filter, Signal Subspace, Kalman filter in terms of WSS, LLR, SegSNR, SNRloss, PESQ and overall quality.

The interaction between information technology and phys ical world makes Cyber-Physical Systems (CPS) vulnerable to malicious attacks beyond the standard cyber attacks. This has motivated the need for attack-resilient state estimation. Yet, the existing state-estimators are based on the non-realistic assumption that the exact system model is known. Consequently, in this work we present a method for state estimation in presence of attacks, for systems with noise and modeling errors. When the the estimated states are used by a state-based feedback controller, we show that the attacker cannot destabilize the system by exploiting the difference between the model used for the state estimation and the real physical dynamics of the system. Furthermore, we describe how implementation issues such as jitter, latency and synchronization errors can be mapped into parameters of the state estimation procedure that describe modeling errors, and provide a bound on the state-estimation error caused by modeling errors. This enables mapping control performance requirements into real-time (i.e., timing related) specifications imposed on the underlying platform. Finally, we illustrate and experimentally evaluate this approach on an unmanned ground vehicle case-study.
 

Misalignment angles estimation of strapdown inertial navigation system (INS) using global positioning system (GPS) data is highly affected by measurement noises, especially with noises displaying time varying statistical properties. Hence, adaptive filtering approach is recommended for the purpose of improving the accuracy of in-motion alignment. In this paper, a simplified form of Celso's adaptive stochastic filtering is derived and applied to estimate both the INS error states and measurement noise statistics. To detect and bound the influence of outliers in INS/GPS integration, outlier detection based on jerk tracking model is also proposed. The accuracy and validity of the proposed algorithm is tested through ground based navigation experiments.

Wireless information security generates shared secret keys from reciprocal channel dynamics. Current solutions are mostly based on temporal per-frame channel measurements of signal strength and suffer from low key generate rate (KGR), large budget in channel probing, and poor secrecy if a channel does not temporally vary significantly. This paper designs a cross-layer solution that measures noise-free per-symbol channel dynamics across both time and frequency domain and derives keys from the highly fine-grained per-symbol reciprocal channel measurements. This solution consists of merits that: (1) the persymbol granularity improves the volume of available uncorrelated channel measurements by orders of magnitude over per-frame granularity in conventional solutions and so does KGR; 2) the solution exploits subtle channel fluctuations in frequency domain that does not force users to move to incur enough temporal variations as conventional solutions require; and (3) it measures noise-free channel response that suppresses key bit disagreement between trusted users. As a result, in every aspect, the proposed solution improves the security performance by orders of magnitude over conventional solutions. The performance has been evaluated on both a GNU SDR testbed in practice and a local GNU Radio simulator. The cross-layer solution can generate a KGR of 24.07 bits per probing frame on testbed or 19 bits in simulation, although conventional optimal solutions only has a KGR of at most one or two bit per probing frame. It also has a low key bit disagreement ratio while maintaining a high entropy rate. The derived keys show strong independence with correlation coefficients mostly less than 0.05. Furthermore, it is empirically shown that any slight physical change, e.g. a small rotation of antenna, results in fundamentally different cross-layer frequency measurements, which implies the strong secrecy and high efficiency of the proposed solution.
 

This paper presents a novel and efficient audio signal recognition algorithm with limited computational complexity. As the audio recognition system will be used in real world environment where background noises are high, conventional speech recognition techniques are not directly applicable, since they have a poor performance in these environments. So here, we introduce a new audio recognition algorithm which is optimized for mechanical sounds such as car horn, telephone ring etc. This is a hybrid time-frequency approach which makes use of acoustic fingerprint for the recognition of audio signal patterns. The limited computational complexity is achieved through efficient usage of both time domain and frequency domain in two different processing phases, detection and recognition respectively. And the transition between these two phases is carried out through a finite state machine(FSM)model. Simulation results shows that the algorithm effectively recognizes audio signals within a noisy environment.

In this paper, an edit detection method for forensic audio analysis is proposed. It develops and improves a previous method through changes in the signal processing chain and a novel detection criterion. As with the original method, electrical network frequency (ENF) analysis is central to the novel edit detector, for it allows monitoring anomalous variations of the ENF related to audio edit events. Working in unsupervised manner, the edit detector compares the extent of ENF variations, centered at its nominal frequency, with a variable threshold that defines the upper limit for normal variations observed in unedited signals. The ENF variations caused by edits in the signal are likely to exceed the threshold providing a mechanism for their detection. The proposed method is evaluated in both qualitative and quantitative terms via two distinct annotated databases. Results are reported for originally noisy database signals as well as versions of them further degraded under controlled conditions. A comparative performance evaluation, in terms of equal error rate (EER) detection, reveals that, for one of the tested databases, an improvement from 7% to 4% EER is achieved, respectively, from the original to the new edit detection method. When the signals are amplitude clipped or corrupted by broadband background noise, the performance figures of the novel method follow the same profile of those of the original method.

Physical attacks against cryptographic devices typically take advantage of information leakage (e.g., side-channels attacks) or erroneous computations (e.g., fault injection attacks). Preventing or detecting these attacks has become a challenging task in modern cryptographic research. In this context intrinsic physical properties of integrated circuits, such as Physical(ly) Unclonable Functions (PUFs), can be used to complement classical cryptographic constructions, and to enhance the security of cryptographic devices. PUFs have recently been proposed for various applications, including anti-counterfeiting schemes, key generation algorithms, and in the design of block ciphers. However, currently only rudimentary security models for PUFs exist, limiting the confidence in the security claims of PUF-based security primitives. A useful model should at the same time (i) define the security properties of PUFs abstractly and naturally, allowing to design and formally analyze PUF-based security solutions, and (ii) provide practical quantification tools allowing engineers to evaluate PUF instantiations. In this paper, we present a formal foundation for security primitives based on PUFs. Our approach requires as little as possible from the physics and focuses more on the main properties at the heart of most published works on PUFs: robustness (generation of stable answers), unclonability (not provided by algorithmic solutions), and unpredictability. We first formally define these properties and then show that they can be achieved by previously introduced PUF instantiations. We stress that such a consolidating work allows for a meaningful security analysis of security primitives taking advantage of physical properties, becoming increasingly important in the development of the next generation secure information systems.