Biblio

Commercial Wireless Sensor Networks (WSNs) can be accessed through sensor web portals. However, associated security implications and threats to the 1) users/subscribers 2) investors and 3) third party operators regarding sensor web portals are not seen in completeness, rather the contemporary work handles them in parts. In this paper, we discuss different kind of security attacks and vulnerabilities at different layers to the users, investors including Wireless Sensor Network Service Providers (WSNSPs) and WSN itself in relation with the two well-known documents i.e., “Department of Homeland Security” (DHS) and “Department of Defense (DOD)”, as these are standard security documents till date. Further we propose a comprehensive cross layer security solution in the light of guidelines given in the aforementioned documents that is minimalist in implementation and achieves the purported security goals.
 

Wireless Sensor Networking is one of the most promising technologies that have applications ranging from health care to tactical military. Although Wireless Sensor Networks (WSNs) have appealing features (e.g., low installation cost, unattended network operation), due to the lack of a physical line of defense (i.e., there are no gateways or switches to monitor the information flow), the security of such networks is a big concern, especially for the applications where confidentiality has prime importance. Therefore, in order to operate WSNs in a secure way, any kind of intrusions should be detected before attackers can harm the network (i.e., sensor nodes) and/or information destination (i.e., data sink or base station). In this article, a survey of the state-of-the-art in Intrusion Detection Systems (IDSs) that are proposed for WSNs is presented. Firstly, detailed information about IDSs is provided. Secondly, a brief survey of IDSs proposed for Mobile Ad-Hoc Networks (MANETs) is presented and applicability of those systems to WSNs are discussed. Thirdly, IDSs proposed for WSNs are presented. This is followed by the analysis and comparison of each scheme along with their advantages and disadvantages. Finally, guidelines on IDSs that are potentially applicable to WSNs are provided. Our survey is concluded by highlighting open research issues in the field.

In recent years, Wireless Sensor Networks (WSNs) have become valuable assets to both the commercial and military communities with applications ranging from industrial control on a factory floor to reconnaissance of a hostile border. A typical WSN topology that applies to most applications allows sensors to act as data sources that forward their measurements to a central sink or base station (BS). The unique role of the BS makes it a natural target for an adversary that desires to achieve the most impactful attack possible against a WSN. An adversary may employ traffic analysis techniques such as evidence theory to identify the BS based on network traffic flow even when the WSN implements conventional security mechanisms. This motivates a need for WSN operators to achieve improved BS anonymity to protect the identity, role, and location of the BS. Many traffic analysis countermeasures have been proposed in literature, but are typically evaluated based on data traffic only, without considering the effects of network synchronization on anonymity performance. In this paper we use evidence theory analysis to examine the effects of WSN synchronization on BS anonymity by studying two commonly used protocols, Reference Broadcast Synchronization (RBS) and Timing-synch Protocol for Sensor Networks (TPSN).

In recent years, Wireless Sensor Networks (WSNs) have become valuable assets to both the commercial and military communities with applications ranging from industrial automation and product tracking to intrusion detection at a hostile border. A typical WSN topology allows sensors to act as data sources that forward their measurements to a central sink or base station (BS). The unique role of the BS makes it a natural target for an adversary that desires to achieve the most impactful attack possible against a WSN. An adversary may employ traffic analysis techniques to identify the BS based on network traffic flow even when the WSN implements conventional security mechanisms. This motivates a need for WSN operators to achieve improved BS anonymity to protect the identity, role, and location of the BS. Although a variety of countermeasures have been proposed to improve BS anonymity, those techniques are typically evaluated based on a WSN that does not employ acknowledgements. In this paper we propose an enhanced evidence theory metric called Acknowledgement-Aware Evidence Theory (AAET) that more accurately characterizes BS anonymity in WSNs employing acknowledgements. We demonstrate AAET's improved robustness to a variety of configurations through simulation.

Wireless Sensor Network has a wide range of applications including environmental monitoring and data gathering in hostile environments. This kind of network is easily leaned to different external and internal attacks because of its open nature. Sink node is a receiving and collection point that gathers data from the sensor nodes present in the network. Thus, it forms bridge between sensors and the user. A complete sensor network can be made useless if this sink node is attacked. To ensure continuous usage, it is very important to preserve the location privacy of sink nodes. A very good approach for securing location privacy of sink node is proposed in this paper. The proposed scheme tries to modify the traditional Blast technique by adding shortest path algorithm and an efficient clustering mechanism in the network and tries to minimize the energy consumption and packet delay.

Wireless Sensor Networks (WSNs) are deployed to monitor the assets (endangered species) and report the locations of these assets to the Base Station (BS) also known as Sink. The hunter (adversary) attacks the network at one or two hops away from the Sink, eavesdrops the wireless communication links and traces back to the location of the asset to capture them. The existing solutions proposed to preserve the privacy of the assets lack in energy efficiency as they rely on random walk routing technique and fake packet injection technique so as to obfuscate the hunter from locating the assets. In this paper we present an energy efficient privacy preserved routing algorithm where the event (i.e., asset) detected nodes called as source nodes report the events' location information to the Base Station using phantom source (also known as phantom node) concept and a-angle anonymity concept. Routing is done using existing greedy routing protocol. Comparison through simulations shows that our solution reduces the energy consumption and delay while maintaining the same level of privacy as that of two existing popular techniques.
 

Sensor networks mainly deployed to monitor and report real events, and thus it is very difficult and expensive to achieve event source anonymity for it, as sensor networks are very limited in resources. Data obscurity i.e. the source anonymity problem implies that an unauthorized observer must be unable to detect the origin of events by analyzing the network traffic; this problem has emerged as an important topic in the security of wireless sensor networks. This work inspects the different approaches carried for attaining the source anonymity in wireless sensor network, with variety of techniques based on different adversarial assumptions. The approach meeting the best result in source anonymity is proposed for further improvement in the source location privacy. The paper suggests the implementation of most prominent and effective LSB Steganography technique for the improvement.

This paper presents the relative merits of IR and microwave sensor technology and their combination with wireless camera for the development of a wall mounted wireless intrusion detection system and explain the phases by which the intrusion information are collected and sent to the central control station using wireless mesh network for analysis and processing the collected data. These days every protected zone is facing numerous security threats like trespassing or damaging of important equipments and a lot more. Unwanted intrusion has turned out to be a growing problem which has paved the way for a newer technology which detects intrusion accurately. Almost all organizations have their own conventional arrangement of protecting their zones by constructing high wall, wire fencing, power fencing or employing guard for manual observation. In case of large areas, manually observing the perimeter is not a viable option. To solve this type of problem we have developed a wall-mounted wireless fencing system. In this project I took the responsibility of studying how the different units could be collaborated and how the data collected from them could be further processed with the help of software, which was developed by me. The Intrusion detection system constitutes an important field of application for IR and microwave based wireless sensor network. A state of the art wall-mounted wireless intrusion detection system will detect intrusion automatically, through multi-level detection mechanism (IR, microwave, active RFID & camera) and will generate multi-level alert (buzzer, images, segment illumination, SMS, E-Mail) to notify security officers, owners and also illuminate the particular segment where the intrusion has happened. This system will enable the authority to quickly handle the emergency through identification of the area of incident at once and to take action quickly. IR based perimeter protection is a proven technology. However IR-based intrusion detection system is not a full-proof solution since (1) IR may fail in foggy or dusty weather condition & hence it may generate false alarm. Therefore we amalgamate this technology with Microwave based intrusion detection which can work satisfactorily in foggy weather. Also another significant arena of our proposed system is the Camera-based intrusion detection. Some industries require this feature to capture the snap-shots of the affected location instantly as the intrusion happens. The Intrusion information data are transmitted wirelessly to the control station via multi hop routing (using active RFID or IEEE 802.15.4 protocol). The Control station will receive intrusion information at real time and analyze the data with the help of the Intrusion software. It then sends SMS to the predefined numbers of the respective authority through GSM modem attached with the control station engine.

A Wireless sensor network is a special type of Ad Hoc network, composed of a large number of sensor nodes spread over a wide geographical area. Each sensor node has the wireless communication capability and sufficient intelligence for making signal processing and dissemination of data from the collecting center .In this paper deals about redundancy management for improving network efficiency and query reliability in heterogeneous wireless sensor networks. The proposed scheme deals about finding a reliable path by using redundancy management algorithm and detection of unreliable nodes by discarding the path. The redundancy management algorithm finds the reliable path based on redundancy level, average distance between a source node and destination node and analyzes the redundancy level as the path and source redundancy. For finding the path from source CH to processing center we propose intrusion tolerance in the presence of unreliable nodes. Finally we applied our analyzed result to redundancy management algorithm to find the reliable path in which the network efficiency and Query success probability will be improved.

Wireless Sensor networks (WSN) is an promising technology and have enormous prospective to be working in critical situations like battlefields and commercial applications such as traffic surveillance, building, habitat monitoring and smart homes and many more scenarios. One of the major challenges in wireless sensor networks face today is security. In this paper we proposed a profile based protection scheme (PPS security scheme against DDoS (Distributed Denial of Service) attack. This king of attacks are flooding access amount of unnecessary packets in network by that the network bandwidth are consumed by that data delivery in network are affected. Our main aim is visualized the effect of DDoS attack in network and identify the node or nodes that are affected the network performance. The profile based security scheme are check the profile of each node in network and only the attacker is one of the node that flooded the unnecessary packets in network then PPS has block the performance of attacker. The performance of network is measured on the basis of performance metrics like routing load, throughput etc. The simulation results are represents the same performance in case of normal routing and in case of PPS scheme, it means that the PPS scheme is effective and showing 0% infection in presence of attacker.