Biblio

In line with the rapid development of the Internet of Things (IoT) network, the challenges faced are ensuring the network performance is capable to support the communication of these IoT devices. As a result, the routing protocols can provide fast route discovery and network maintenance by considering the IoT network's resource constraints. This paper's main contributions are to identify compatible IoT routing protocol using qualitative method and factor that affect network performance. Routing Protocol for Low Power and Lossy Networks (RPL) is a proactive distance- vector routing protocol designed as a proposed standard to meet the requirements of the Low Power and Lossy Networks (LLN). In this project, four influential factors on the performance of RPL in Contiki OS are examined using the Cooja simulator and then RPL performance is assessed in terms of Packet Delivery Ratio (PDR), Energy consumption and Overhead control message for the network. The project provides an insight into the implications of traffic patterns, transmission ranges, network size and node mobility for different scenarios. The results of the simulation show that the PDR and overhead ratio increases proportional to transmission distances increases but decreases while radio interference is increased. From the mobility aspect, PDR decreases by an average of 19.5% when the mobility nodes expand. On the other hand, energy consumption increases by an average of 63.7% and control message size increased up to 213% when the network consists of 40 percent of mobility nodes.

Today, everyone is highly dependent on the internet. Everyone performed online shopping and online activities such as online Bank, online booking, online recharge and more on internet. Phishing is a type of website threat and phishing is Illegally on the original website Information such as login id, password and information of credit card. This paper proposed an efficient machine learning based phishing detection technique. Overall, experimental results show that the proposed technique, when integrated with the Support vector machine classifier, has the best performance of accurately distinguishing 95.66% of phishing and appropriate websites using only 22.5% of the innovative functionality. The proposed technique exhibits optimistic results when benchmarking with a range of standard phishing datasets of the “University of California Irvine (UCI)” archive. Therefore, proposed technique is preferred and used for phishing detection based on machine learning.

Information level protection standard 2.0 requires trusted verification of system bootstrappers, system programs, etc. of server equipment based on trusted root. According to the requirements of information level protection standard, this paper puts forward a network trusted start-up scheme based on the trusted platform control module to guarantee the security and trust of the server's BIOS firmware, PXE boot file and Linux system file. When publishing BIOS firmware, PXE startup file, Linux system file, the state-secret algorithm SM3 is used to calculate the summary value as the benchmark value, and stored in the trusted platform control module, BIOS firmware, Linux boot file. When the server starts up with PXE, the BIOS firmware is measured by the Trusted Platform Control Module, the BIOS Start Environment Measures PXE Boot File, and the PXE Boot File measures the Linux system file. The trusted platform control module is the trust root level measurement level, the first level of trust level, the trust chain, the implementation of a trusted server operating environment. The method proposed in this paper is tested on the domestic autonomous controllable Sunway server, and the experimental results show that the method proposed in this paper is feasible.

This article describes the process assembling of Encryption & Decryption In Trusted Platform Module of encoding information in NM640X \textregistered. Encoding of information, carried out in assembly language according to Gost 28147-89. It is a realisation of standard GOST 28147-89- Russian state symmetric key block cipher. GOST 28147-89 has 64-bit to access the kernel, trust, and allocated memory in the BlockSize and 256-bit KeySize.

This paper uses side channel analysis to detect hardware Trojan based on back propagation neural network. First, a power consumption collection platform is built to collect power waveforms, and the amplifier is utilized to amplify power consumption information to improve the detection accuracy. Then the small difference between the power waveforms is recognized by the back propagation neural network to achieve the purpose of detection. This method is validated on Advanced Encryption Standard circuit. Results show this method is able to identify the circuits with a Trojan occupied 0.19% of Advanced Encryption Standard circuit. And the detection accuracy rate can reach 100%.

Verifiability is one of the parameters in e-voting that can increase confidence in voting technology with several parties ensuring that voters do not change their votes. Voting has become an important part of the democratization system, both to make choices regarding policies, to elect representatives to sit in the representative assembly, and to elect leaders. the more voters and the wider the distribution, the more complex the social life, and the need to manage the voting process efficiently and determine the results more quickly, electronic-based voting (e-Voting) is becoming a more promising option. The level of confidence in voting depends on the capabilities of the system. E-voting must have parameters that can be used as guidelines, which include the following: Accuracy, Invulnerability, Privacy and Verifiability. The implementation of the simple verifiability metric to measure the degree of verifiability in the e-voting protocol, the researchers can calculate the degree of verifiability in the e-voting protocol and the researchers have been able to assess the proposed e-voting protocol with the standard of the best degree of verifiability is 1, where the value of 1 is is absolutely verified protocol.

The concept of AI Gossip is presented. It is analogous to the traditional understanding of a pernicious human failing. It is made more egregious by the technology of AI, internet, current privacy policies, and practices. The recognition by the technological community of its complacency is critical to realizing its damaging influence on human rights. A current example from the medical field is provided to facilitate the discussion and illustrate the seriousness of AI Gossip. Further study and model development is encouraged to support and facilitate the need to develop standards to address the implications and consequences to human rights and dignity.

In order to develop safety-reliable standards for IoT (Internet of Things) networks, appropriate tools for their verification are needed. Among them there is a group of tools based on automated symbolic analysis. Such a tool is Tamarin software. Its usage for creating formal proofs of security protocols correctness has been presented in this paper using the simple example of an exchange of messages with asynchronous encryption between two agents. This model can be used in sensor networks or IoT e.g. in TLS protocol to provide a mechanism for secure cryptographic key exchange.

Power system automation and communication standards are spearheading the power system transition towards a smart grid. IEC 61850 is one such standard, which is widely used for substation automation and protection. It enables real-time communication and data exchange between critical substation automation and protection devices within digital substations. However, IEC 61850 is not cyber secure. In this paper, we demonstrate the dangerous implications of not securing IEC 61850 standard. Cyber attacks may exploit the vulnerabilities of the Sampled Values (SV) and Generic Object-Oriented Substation Event (GOOSE) protocols of IEC 61850. The cyber attacks may be realised by injecting spoofed SV and GOOSE data frames into the substation communication network at the bay level. We demonstrate that such cyber attacks may lead to obstruction or tripping of multiple protective relays. Coordinated cyber attacks against the protection system in digital substations may cause generation and line disconnections, triggering cascading failures in the power grid. This may eventually result in a partial or complete blackout. The attack model, impact on system dynamics and cascading failures are veri ed experimentally through a proposed cyber-physical experimental framework that closely resembles real-world conditions within a digital substation, including Intelligent Electronic Devices (IEDs) and protection schemes. It is implemented through Hardware-in-the-Loop (HIL) simulations of commercial relays with a Real-Time Digital Simulator (RTDS).

This paper presents an introduction to functional safety through ISO 26262 focusing on system, software and hardware possible failures that bring security threats and discussion on DO 254. It discusses the approach to bridge the gap between different other hazard level and system ability to identify the particular fault and resolve it minimum time span possible. Results are analyzed by designing models to check and avoid all the failures, loophole prior development.

In recent years, several trust management frame-works and models have been proposed for the Internet of Things (IoT). Focusing primarily on distributed trust management schemes; testing and validation of these models is still a challenging task. It requires the implementation of the proposed trust model for verification and validation of expected outcomes. Nevertheless, a stand-alone and standard IoT network simulator for testing of distributed trust management scheme is not yet available. In this paper, a .NET-based Distributed Trust Management Simulator for IoT Networks (DTMSim-IoT) is presented which enables the researcher to implement any static/dynamic trust management model to compute the trust value of a node. The trust computation will be calculated based on the direct-observation and trust value is updated after every transaction. Transaction history and logs of each event are maintained which can be viewed and exported as .csv file for future use. In addition to that, the simulator can also draw a graph based on the .csv file. Moreover, the simulator also offers to incorporate the feature of identification and mitigation of the On-Off Attack (OOA) in the IoT domain. Furthermore, after identifying any malicious activity by any node in the networks, the malevolent node is added to the malicious list and disseminated in the network to prevent potential On-Off attacks.

With the improvement of people's living standards, more and more network users access the network, including a large number of infrastructure, these devices constitute the Internet of things(IoT). With the rapid expansion of devices in the IoT, the data transmission between the IoT has become more complex, and the security issues are facing greater challenges. SDN as a mature network architecture, its security has been affirmed by the industry, it separates the data layer from the control layer, thus greatly improving the security of the network. In this paper, we apply the SDN to the IoT, and propose a IoT network architecture based on SDN. In this architecture, we not only make use of the security features of SDN, but also deploy different security modules in each layer of SDN to integrate, analyze and plan various data through the IoT, which undoubtedly improves the security performance of the network. In the end, we give a comprehensive introduction to the system and verify its performance.

Today, authentication and non-repudiation of actions are essential requirements for almost all mobile services. In this respect, various common identity systems (such as Facebook Login, Google Sign-In, Apple ID and many other) based on OpenID Connect protocol have been introduced that support easier password management for users, and reduce potential risks by securing the service provider and the user. With the widespread use of the Internet, smartphones can offer many services with rich content. The use of common identity systems on mobile devices with a high security level is becoming a more important requirement. At this point, MNOs (Mobile Network Operators) have a significant potential and capability for providing common identity services. The existing solutions based on Mobile Connect standard provide generally low level of assurance. Accordingly, there is an urgent need for a common identity system that provide higher level of assurance and security for service providers. This study presents a multi-factor authentication mechanism called TrustedID system that is based on Mobile Connect and OpenID Connect standards, and ensures higher level of assurance. The proposed system aims to use three identity factors of the user in order to access sensitive mobile services on the smartphone. The proposed authentication system will support improvement of new value-added services and also support the development of mobile ecosystem.

Cyber security is becoming a vital part of many information technologies and computing systems. Increasingly, High-Performance Computing systems are used in scientific research, academia and industry. High-Performance Computing applications are specifically designed to take advantage of the parallel nature of High-Performance Computing systems. Current research into High-Performance Computing systems focuses on the improvements in software development, parallel algorithms and computer systems architecture. However, there are no significant efforts in developing common High-Performance Computing security standards. Security of the High-Performance Computing resources is often an add-on to existing varied institutional policies that do not take into account additional requirements for High-Performance Computing security. Also, the users' terminals or portals used to access the High-Performance Computing resources are frequently insecure or they are being used in unprotected networks. In this paper we present Bearicade - a Data-driven Security Orchestration Automation and Response system. Bearicade collects data from the HPC systems and its users, enabling the use of Machine Learning based solutions to address current security issues in the High-Performance Computing systems. The system security is achieved through monitoring, analysis and interpretation of data such as users' activity, server requests, devices used and geographic locations. Any anomaly in users' behaviour is detected using machine learning algorithms, and would be visible to system administrators to help mediate the threats. The system was tested on a university campus grid system by administrators and users. Two case studies, Anomaly detection of user behaviour and Classification of Malicious Linux Terminal Command, have demonstrated machine learning approaches in identifying potential security threats. Bearicade's data was used in the experiments. The results demonstrated that detailed information is provided to the HPC administrators to detect possible security attacks and to act promptly.

Due to the rapid growth of using Internet of Things (IoT) devices in the daily life, the need to achieve an acceptable level of security and privacy according to the real security risks for these devices is rising. Security risks may include privacy threats like gaining sensitive information from a device, and authentication problems from counterfeit or cloned devices. It becomes more challenging to add strong security features to extremely constrained devices compared to battery operated devices that have more computational and storage capabilities. We propose a novel application specific instruction-set architecture that allows flexibility on many design levels and achieves the required security level for the Electronic Product Code (EPC) passive Radio Frequency Identification (RFID) tag device. Our solution moves a major design effort from hardware to software, which largely reduces the final unit cost. The proposed architecture can be implemented with 4,662 gate equivalent units (GEs) for 65 nm CMOS technology excluding the memory and the cryptographic units. The synthesis results fulfill the requirements of extremely constrained devices and allow the inclusion of cryptographic units into the datapath of the proposed application-specific instruction set processor (ASIP).

A Distributed Denial of Service ( DDoS ) attack is usually instigated on a primary server that provides important services in a network. However such DDoS attacks can be identified and mitigated by the controller in a Software Defined Network (SDN). If the intruder further performs an attack on the controller along with the server, the attack becomes successful.In this paper, we show how such a combined DDoS attack can be instigated on a controller as well as a primary server. The DDoS attack on the primary server is instigated by compromising few hosts to send packets with spoofed IP addresses and the attack on the controller is instigated by compromising few switches to send flow table requests repeatedly to the controller. With the help of an emulator called mininet, we show the severity of this attack on the performance of the network. We further propose a common technique that can be used to mitigate this kind of attack by observing the variation of destination IP addresses and setting different priorities to switches and handling the flow table requests accordingly by the controller.

Conversational agents (CAs), often referred to as chatbots, are being widely deployed within existing commercial frameworks and online service websites. As society moves further into incorporating data rich systems, like the internet of things (IoT), into daily life, it is expected that conversational agents will take on an increasingly important role to help users manage these complex systems. In this, the concept of personality is becoming increasingly important, as we seek for more human-friendly ways to interact with these CAs. In this work a conceptual framework is proposed that considers how existing standard psychological and persona models could be mapped to different kinds of CA functionality outside of strictly dialogue. As CAs become more diverse in their abilities, and more integrated with different kinds of systems, it is important to consider how function can be impacted by the design of agent personality, whether intentionally designed or not. Based on this framework, derived archetype classes of CAs are presented as starting points that can hopefully aid designers, developers, and the curious, into thinking about how to work toward better CA personality development.

The massive proliferation of state of the art interfaces into the automotive sector has triggered a revolution in terms of the technological ecosystem that is found in today's modern car. Accordingly, on the one hand, we find dozens of Electronic Control Units (ECUs) running several hundred MB of code, and more and more sophisticated dashboards with integrated wireless communications. On the other hand, in the same vehicle we find the underlying communication infrastructure struggling to keep up with the pace of these radical changes. This paper presents MixCAN (MIXed data authentication for Control Area Networks), an approach for mixing different message signatures (i.e., authentication tags) in order to reduce the overhead of Controller Area Network (CAN) communications. MixCAN leverages the attributes of Bloom Filters in order to ensure that an ECU can sign messages with different CAN identifiers (i.e., mix different message signatures), and that other ECUs can verify the signature for a subset of monitored CAN identifiers. Extensive experimental results based on Vectors Informatik's CANoe/CANalyzer simulation environment and the data set provided by Hacking and Countermeasure Research Lab (HCRL) confirm the validity and applicability of the developed approach. Subsequent experiments including a test bed consisting of Raspberry Pi 3 Model B+ systems equipped with CAN communication modules demonstrate the practical integration of MixCAN in real automotive systems.

As the technology is getting advanced continuously the problem for the security of data is also increasing. The hackers are equipped with new advanced tools and techniques to break any security system. Therefore people are getting more concern about data security. The data security is achieved by either software or hardware implementations. In this work Field Programmable Gate Arrays (FPGA) device is used for hardware implementation since these devices are less complex, more flexible and provide more efficiency. This work focuses on the hardware execution of one of the security algorithms that is the Advanced Encryption Standard (AES) algorithm. The AES algorithm is executed on Vivado 2014.2 ISE Design Suite and the results are observed on 28 nanometers (nm) Artix-7 FPGA. This work discusses the design implementation of the AES algorithm and the resources consumed in implementing the AES design on Artix-7 FPGA. The resources which are consumed are as follows-Slice Register (SR), Look-Up Tables (LUTs), Input/Output (I/O) and Global Buffer (BUFG).

Using steganography for data hiding is becoming a main subject to ensure both information security and picture quality. Traditional steganography algorithms usually convert secret information into a binary string and embed it in the pixel data of the cover image. In order to ensure the information security as well as convenient transmission, this work studies the steganography algorithm of embedding the QR code containing secret information into the cover image, based on the JSteg algorithm. Secret messages with different sizes have been tested by many cover images and standard parameters have adopted to verify the efficiency. According to the experimental results, all the PSNR in a value that is greater than 47.6 dB. The proposed method has high security and more imperceptibility.

In this paper is devoted methods for generating keys for cryptographic algorithms. Hash algorithms were analysed and learned linear and nonlinear. It was made up improved key generation algorithm and software.

This research paper presented a design that will address the challenges brought by remanence in ground-fault current interrupter devices (gfci). Remanence or residual magnetism is the magnetization left behind in a ferromagnetic material (such as iron) after an external magnetic field is removed. Remanence will make the gfci devices less accurate and less reliable in tripping the current above threshold in just five (5) years. It affects the performance of the device in terms of efficiency, accuracy, and response time. In this research, the problems caused by remanence were alleviated by using two identical transformers in detecting residual current both for hot and neutral wires. The difference of the current detected by the two transformers will be the basis of the signal threshold in tripping the device. By doing so, the problems caused by remanence phenomenon will be solved without compromising the response time of the circuit which is around 16 mS. The design will extend the life span of GFCI devices up to 15 years.

Expressing Keystroke Dynamics (KD) in form of sound opens new avenues to apply sound analysis techniques on KD. However this mapping is not straight-forward as varied feature space, differences in magnitudes of features and human interpretability of the music bring in complexities. We present a musical interface to KD by mapping keystroke features to music features. Music elements like melody, harmony, rhythm, pitch and tempo are varied with respect to the magnitude of their corresponding keystroke features. A pitch embedding technique makes the music discernible among users. Using the data from 30 users, who typed fixed strings multiple times on a desktop, shows that these auditory signals are distinguishable between users by both standard classifiers (SVM, Random Forests and Naive Bayes) and humans alike.

In this article, authors present the results of testing the modified HTB traffic control algorithm in an experimental setup. The algorithm is implemented as a Linux kernel module. An analysis of the experimental results revealed the effect of uneven packet loss in priority classes. In the second part of the article, the authors propose a solution to this problem by applying a distribution scheme for the excess of tokens, according to which excess class tokens are given to the leaf with the highest priority. The new modification of the algorithm was simulated in the AnyLogic environment. The results of an experimental study demonstrated that dividing the excess tokens of the parent class between daughter classes is less effective in terms of network performance than allocating the excess tokens to a high-priority class during the competition for tokens between classes. In general, a modification of the HTB algorithm that implements the proposed token surplus distribution scheme yields more consistent delay times for the high-priority class.

Much research is concentrated on improving models for host-based intrusion detection systems (HIDS). Typically, such research aims at improving a model's results (e.g., reducing the false positive rate) in the familiar static training/testing environment using the standard data sources. Matching advancements in the machine learning community, researchers in the syscall HIDS domain have developed many complex and powerful syscall-based models to serve as anomaly detectors. These models typically show an impressive level of accuracy while emphasizing on minimizing the false positive rate. However, with each proposed model iteration, we get further from the setting in which these models are intended to operate. As kernels become more ornate and hardened, the implementation space for anomaly detection models is narrowing. Furthermore, the rapid advancement of operating systems and the underlying complexity introduced dictate that the sometimes decades-old datasets have long been obsolete. In this paper, we attempt to bridge the gap between theoretical models and their intended application environments by examining the recent Linux kernel 5.7.0-rc1. In this setting, we examine the feasibility of syscall-based HIDS in modern operating systems and the constraints imposed on the HIDS developer. We discuss how recent advancements to the kernel have eliminated the previous syscall trace collect method of writing syscall table wrappers, and propose a new approach to generate data and place our detection model. Furthermore, we present the specific execution time and memory constraints that models must meet in order to be operable within their intended settings. Finally, we conclude with preliminary results from our model, which primarily show that in-kernel machine learning models are feasible, depending on their complexity.