Biblio

We show that a new type of dielectric cavity featuring deep sub-wavelength light confinement allows a significant speedup of all-optical signal processing functionalities, without compromising the energy efficiency. The effect is due to enhanced diffusion dynamics in an unconventional geometry.

Visible light communication (VLC) is a short-range wireless optical communication that can transmit data by switching lighting elements at high speeds in indoor areas. In common areas, VLC can provide data security at every layer of communication by using physical layer security (PLS) techniques as well as existing cryptography-based techniques. In the literature, PLS techniques have generally been studied for monochrome VLC systems, and multicolor VLC studies are quite limited. In this study, to the best of authors’ knowledge, null steering (NS) and artificial noise (AN), which are widely used PLS methods, have been applied to multi-colored LED-based VLC systems for the first time in the literature and the achievable secrecy rate has been calculated.

Novel magneto-optical isolator and self-holding optical switch with an a-Si:H microring resonator are demonstrated. The devices are driven by the remanence of integrated thin-film magnet and, therefore, maintain their state without any power supply.

We focus on policy-aware data centers (PADCs), wherein virtual machine (VM) traffic traverses a sequence of middleboxes (MBs) for security and performance purposes, and propose two new VM placement and migration problems. We first study PAL: policy-aware virtual machine placement. Given a PADC with a data center policy that communicating VM pairs must satisfy, the goal of PAL is to place the VMs into the PADC to minimize their total communication cost. Due to dynamic traffic loads in PADCs, however, above VM placement may no longer be optimal after some time. We thus study PAM: policy-aware virtual machine migration. Given an existing VM placement in the PADC and dynamic traffic rates among communicating VMs, PAM migrates VMs in order to minimize the total cost of migration and communication of the VM pairs. We design optimal, approximation, and heuristic policyaware VM placement and migration algorithms. Our experiments show that i) VM migration is an effective technique, reducing total communication cost of VM pairs by 25%, ii) our PAL algorithms outperform state-of-the-art VM placement algorithm that is oblivious to data center policies by 40-50%, and iii) our PAM algorithms outperform the only existing policy-aware VM migration scheme by 30%.

A full-duplex self-recovery optical fibre transport system is proposed on the basis of a novel passive single-line bidirectional optical add/drop multiplexer (SBOADM). This system aims to achieve an access network with low complexity and network protection capability. Polarisation division multiplexing technique, optical double-frequency application and wavelength reuse method are also employed in the transport system to improve wavelength utilisation efficiency and achieve colourless optical network unit. When the network comprises a hybrid tree-ring topology, the downstream signals can be bidirectionally transmitted and the upstream signals can continuously be sent back to the central office in the reverse pathways due to the remarkable routing function of the SBOADM. Thus, no complicated optical multiplexer/de-multiplexer components or massive optical switches are required in the transport system. If a fibre link failure occurs in the ring topology, then the blocked network connections can be recovered by switching only a single optical switch preinstalled in the remote node. Simulation results show that the proposed architecture can recover the network function effectively and provide identical transmission performance to overcome the impact of a breakpoint in the network. The proposed transport system presents remarkable flexibility and convenience in expandability and breakpoint self-recovery.

Although OpenFlow-based SDN networks make it easier to design and test new protocols, when you think of clean slate architectures, their use is quite limited because the parameterization of its flows resides primarily in TCP/IP protocols. Besides, despite the many benefits that SDN offers, some aspects have not yet been adequately addressed, such as management plane activities, network startup, and options for connecting the data plane to the control plane. Based on these issues and limitations, this work presents a bootstrap protocol for SDN-based networks, which allows, beyond the network topology discovery, automatic configuration of an inband control plane. The protocol is designed to act only on layer two, in an autonomous, distributed and deterministic way, with low overhead and has the intent to be the basement for the implementation of other management plane related activities. A formal specification of the protocol is provided. In addition, an analytical model was created to preview the number of required messages to establish the control plane. According to this model, the proposed protocol presents less overhead than similar de-facto protocols used to topology discovery in SDN networks.

Resilience and security of infrastructures depend not only on their constituent systems but also on interdependencies among them. This paper studies how these interdependencies in infrastructures affect the defense effort needed to counter external attacks, by formulating a simultaneous game between a service provider (i.e., defender) and an attacker. Effects of interdependencies in three basic topological structures, namely, bus, star and ring, are considered and compared in terms of the game-theoretic defense strategy. Results show that in a star topology, the attacker's and defender's pure strategies at Nash Equilibrium (NE) are sensitive to interdependency levels whereas in a bus structure, the interdependencies show little impact on both defender's and attacker's pure strategies. The sensitivity estimates of defense and attack strategies at NE with respect to target valuation and unit cost are also presented. The results provide insights into infrastructure design and resource allocation for reinforcement of constituent systems.

The realization principle of zero-time self-healing network communication technology is introduced. According to the characteristics of ship monitoring, an integrated ship monitoring network is designed, which integrates the information of ship monitoring equipment. By setting up a network performance test environment, the information delay of self-healing network switch is tested, and the technical characteristics of "no packet loss" are verified. Zero-time self-healing network communication technology is an innovative technology in the design of ship monitoring network. It will greatly reduce the laying of network cables, reduce the workload of information upgrade and transformation of ships, and has the characteristics of continuous maintenance of the network. It has a wide application prospect.

The communication security issue is of great importance and should not be ignored in backbone optical networks which is undergoing the evolution toward software defined networks (SDN). With the aim to solve this problem, this paper conducts deep analysis into the security challenge of software defined optical networks (SDON) and proposes a so-called security-enhanced signaling scheme of SDON. The proposed scheme makes full advantage of current OpenFIow protocol with some necessary extensions and security improvement, by combining digital signatures and message feedback with efficient PKI (Public Key Infrastructure) in signaling procedure of OpenFIow interaction. Thus, this security-enhanced signaling procedure is also designed in details to make sure the end-to-end trusted service connection. Simulation results show that this proposed approach can greatly improve the security level of large-scale optical network for Energy Internet services with better performance in term of connection success rate performance.

We have presented a unique PT-VCSEL arrangement which experimentally demonstrates the process of optically controlled current confinement. Lessons learned will be transferred to future generations of solitary device which will be optimized with respect to the degree of confinement (depending on the parameters of the PT, in particular the current gain), threshold current and electro-optic efficiency.

Summary form only given. All-optical switching (AOS) has been observed in ferromagnetic (FM) layers and synthetic ferrimagnetic heterostructures [1-4]. In this work, we use anomalous Hall effect (AHE) measurements to demonstrate controlled helicity-dependent switching in synthetic ferrimagnetic heterostructures. The two FM layers are engineered to have different Curie temperatures Tc1 (fixed) and Tc2 (variable). We show that irrespective of whether Tc2 is higher or lower than Tc1, the final magnetic configuration of the heterostructure is controlled by using the laser polarization to set the magnetic state of the FM layer with the highest Tc. All samples were grown on glass substrates at room temperature by DC magnetron sputtering. Two sets of samples were prepared. The first set are single FM layers with layer composition Ta (3 nm)/Pt (4 nm)/FM1(2)/Pt capping (4 nm), where FM1 = Co (0.6 nm) is a Co layer and FM2 = CoFeB (tCoFeB)/Pt(0.4 nm)/ CoFeB (tCoFeB) (0.2 ≤ tCoFeB ≤ 0.6 nm) is a composite CoFeB layer where both CoFeB layers are ferromagnetically coupled and act as a single layer. FM1 and FM2 were used to produce the second set of synthetic ferrimagnetic samples with layer structure Ta (3 nm)/Pt (4 nm)/FM1/Pt (0.4 nm)/Ru (0.9 nm)/Pt (0.4 nm)/FM2/Pt capping (4 nm). The Ru layer provides the antiferromagnetic RKKY interlayer exchange coupling between the adjacent FM1 and FM2 layers while the Pt layers on either side of the Ru layer can tune the strength of the coupling and stabilize their perpendicular anisotropy [5]. To study the AOS, we use a Ti: sapphire fs-laser with a wavelength of 800 nm and a pulse duration of 43 fs. A quarter-wave plate is used to create a circularly polarized [right(σ+) and left-handed (σ-)] beam. We first measured the magnetic properties of the FM1 and FM2 layers using vibrating sample magnetometry (VSM). All FM samples show full remanence in perpendicular hyst- resis loops at room temperature (not shown). The temperature-dependent magnetization scans (not shown) give a Curie temperature Tc1 of 524 K for FM1. For FM2, increasing tCoFeB increases its Curie temperatureTc2. At tCoFeB = 0.5 nm, Tc2 - Tc1. Hall crosses are patterned by optical lithography and ion milling. The width of the current carrying wire is - 5 um, giving a DC current density of - 6 x 109 A/m2 during the measurement. Figure 1(a) shows the resulting perpendicular Hall hysteresis loop of the synthetic ferrimagnetic sample with tCoFeB = 0.2 nm. At remanence, the stable magnetic configurations are the two antiparallel orientations of FM1 and FM2 [State I and II in Fig. 1(a)]. To study the AOS, we swept the laser beam with a power of 0.45 mW and a speed of 1 μm/sec across the Hall cross, and the corresponding Hall voltage was constantly monitored. In Fig. 1(b), we show the normalized Hall voltage, VHall, as a function of the laser beam position x for both beam polarizations σ+ and σ-. The initial magnetic configuration was State I. When the beam is at the center of the cross (position B), both beam polarizations give VHall - 0. As the beam leaves the cross (position C), the σbeam changes the magnetic configurations from State I to State II (FM1 magnetization pointing down), while the system reverts to State I using the σ+ beam. Changing the initial configuration from State I to State II results in the same final magnetic configurations, determined by the laser beam polarizations (not shown). Similar results (not shown) were obtained for samples with tCoFeB ≤ 0.4 nm. However, at tCoFeB = 0.6 nm, the σbeam results in the final magnetic configurations with FM2 magnetization pointing down (State I) and the σ+ beam results in the State II configuration, suggesting that the final state is determined by the beam polar

A novel optical fiber sensing network is proposed to eliminate the effect of multiple fiber failures. Simulation results show that if the number of breakpoint in each subnet is less than four, the optical routing paths can be reset to avoid those breakpoints by changing the status of optical switches in the remote nodes.