Biblio

The article describes design and realization of security system based on single-chip microcontrollers. System includes sensor modules for unauthorized entrance detection based on magnetic contact, measuring carbon monoxide level, movement detection and measuring temperature and humidity. System also includes control unit, control panel and development board Arduino with ethernet interface connected for web server implementation.

Infrared thermography has been recognized for its ability to investigate integrated circuits in a non destructive way. Coupled to lock-in correlation it has proven efficient in detecting thermal hot spots. Most of the state of the Art measurement systems are based on amplitude analysis. In this paper we propose to investigate weak thermal hot spots using the phase of infrared signals. We demonstrate that phase analysis is a formidable alternative to amplitude to detect small heat signatures. Finally, we apply our measurement platform and its detection method to the identification of stealthy hardware Trojans.

Today's emerging Industrial Internet of Things (IIoT) scenarios are characterized by the exchange of data between services across enterprises. Traditional access and usage control mechanisms are only able to determine if data may be used by a subject, but lack an understanding of how it may be used. The ability to control the way how data is processed is however crucial for enterprises to guarantee (and provide evidence of) compliant processing of critical data, as well as for users who need to control if their private data may be analyzed or linked with additional information - a major concern in IoT applications processing personal information. In this paper, we introduce LUCON, a data-centric security policy framework for distributed systems that considers data flows by controlling how messages may be routed across services and how they are combined and processed. LUCON policies prevent information leaks, bind data usage to obligations, and enforce data flows across services. Policy enforcement is based on a dynamic taint analysis at runtime and an upfront static verification of message routes against policies. We discuss the semantics of these two complementing enforcement models and illustrate how LUCON policies are compiled from a simple policy language into a first-order logic representation. We demonstrate the practical application of LUCON in a real-world IoT middleware and discuss its integration into Apache Camel. Finally, we evaluate the runtime impact of LUCON and discuss performance and scalability aspects.

The indoor air quality in industrial workplace buildings, e.g. air temperature, humidity and levels of carbon dioxide (CO2), play a critical role in the perceived levels of workers' comfort and in reported medical health. CO2 can act as an oxygen displacer, and in confined spaces humans can have, for example, reactions of dizziness, increased heart rate and blood pressure, headaches, and in more serious cases loss of consciousness. Specialized organizations can be brought in to monitor the work environment for limited periods. However, new low cost wireless sensor network (WSN) technologies offer potential for more continuous and autonomous assessment of industrial workplace air quality. Central to effective decision making is the data analytics approach and visualization of what is potentially, big data (BD) in monitoring the air quality in industrial workplaces. This paper presents a case study that monitors air quality that is collected with WSN technologies. We discuss the potential BD problems. The case trials are from two workshops that are part of a large on-shore logistics base a regional shipping industry in Norway. This small case study demonstrates a monitoring and visualization approach for facilitating BD in decision making for health and safety in the shipping industry. We also identify other potential applications of WSN technologies and visualization of BD in the workplace environments; for example, for monitoring of other substances for worker safety in high risk industries and for quality of goods in supply chain management.

In an Internet of Things (IOT) network, each node (device) provides and requires services and with the growth in IOT, the number of nodes providing the same service have also increased, thus creating a problem of selecting one reliable service from among many providers. In this paper, we propose a scalable graph-based collaborative filtering recommendation algorithm, improved using trust to solve service selection problem, which can scale to match the growth in IOT unlike a central recommender which fails. Using this recommender, a node can predict its ratings for the nodes that are providing the required service and then select the best rated service provider.

Summary form only given. All-optical switching (AOS) has been observed in ferromagnetic (FM) layers and synthetic ferrimagnetic heterostructures [1-4]. In this work, we use anomalous Hall effect (AHE) measurements to demonstrate controlled helicity-dependent switching in synthetic ferrimagnetic heterostructures. The two FM layers are engineered to have different Curie temperatures Tc1 (fixed) and Tc2 (variable). We show that irrespective of whether Tc2 is higher or lower than Tc1, the final magnetic configuration of the heterostructure is controlled by using the laser polarization to set the magnetic state of the FM layer with the highest Tc. All samples were grown on glass substrates at room temperature by DC magnetron sputtering. Two sets of samples were prepared. The first set are single FM layers with layer composition Ta (3 nm)/Pt (4 nm)/FM1(2)/Pt capping (4 nm), where FM1 = Co (0.6 nm) is a Co layer and FM2 = CoFeB (tCoFeB)/Pt(0.4 nm)/ CoFeB (tCoFeB) (0.2 ≤ tCoFeB ≤ 0.6 nm) is a composite CoFeB layer where both CoFeB layers are ferromagnetically coupled and act as a single layer. FM1 and FM2 were used to produce the second set of synthetic ferrimagnetic samples with layer structure Ta (3 nm)/Pt (4 nm)/FM1/Pt (0.4 nm)/Ru (0.9 nm)/Pt (0.4 nm)/FM2/Pt capping (4 nm). The Ru layer provides the antiferromagnetic RKKY interlayer exchange coupling between the adjacent FM1 and FM2 layers while the Pt layers on either side of the Ru layer can tune the strength of the coupling and stabilize their perpendicular anisotropy [5]. To study the AOS, we use a Ti: sapphire fs-laser with a wavelength of 800 nm and a pulse duration of 43 fs. A quarter-wave plate is used to create a circularly polarized [right(σ+) and left-handed (σ-)] beam. We first measured the magnetic properties of the FM1 and FM2 layers using vibrating sample magnetometry (VSM). All FM samples show full remanence in perpendicular hyst- resis loops at room temperature (not shown). The temperature-dependent magnetization scans (not shown) give a Curie temperature Tc1 of 524 K for FM1. For FM2, increasing tCoFeB increases its Curie temperatureTc2. At tCoFeB = 0.5 nm, Tc2 - Tc1. Hall crosses are patterned by optical lithography and ion milling. The width of the current carrying wire is - 5 um, giving a DC current density of - 6 x 109 A/m2 during the measurement. Figure 1(a) shows the resulting perpendicular Hall hysteresis loop of the synthetic ferrimagnetic sample with tCoFeB = 0.2 nm. At remanence, the stable magnetic configurations are the two antiparallel orientations of FM1 and FM2 [State I and II in Fig. 1(a)]. To study the AOS, we swept the laser beam with a power of 0.45 mW and a speed of 1 μm/sec across the Hall cross, and the corresponding Hall voltage was constantly monitored. In Fig. 1(b), we show the normalized Hall voltage, VHall, as a function of the laser beam position x for both beam polarizations σ+ and σ-. The initial magnetic configuration was State I. When the beam is at the center of the cross (position B), both beam polarizations give VHall - 0. As the beam leaves the cross (position C), the σbeam changes the magnetic configurations from State I to State II (FM1 magnetization pointing down), while the system reverts to State I using the σ+ beam. Changing the initial configuration from State I to State II results in the same final magnetic configurations, determined by the laser beam polarizations (not shown). Similar results (not shown) were obtained for samples with tCoFeB ≤ 0.4 nm. However, at tCoFeB = 0.6 nm, the σbeam results in the final magnetic configurations with FM2 magnetization pointing down (State I) and the σ+ beam results in the State II configuration, suggesting that the final state is determined by the beam polar

Ensemble waveform analysis is used to calculate signal to noise ratio (SNR) and other recording characteristics from micromagnetically modeled heat assisted magnetic recording waveforms and waveforms measured at both drive and spin-stand level. Using windowing functions provides the breakdown between transition and remanence SNRs. In addition, channel bit density (CBD) can be extracted from the ensemble waveforms using the di-bit extraction method. Trends in both transition SNR, remanence SNR, and CBD as a function of ambient temperature at constant track width showed good agreement between model and measurement. Both model and drive-level measurement show degradation in SNR at higher ambient temperatures, which may be due to changes in the down-track profile at the track edges compared with track center. CBD as a function of cross-track position is also calculated for both modeling and spin-stand measurements. The CBD widening at high cross-track offset, which is observed at both measurement and model, was directly related to the radius of curvature of the written transitions observed in the model and the thermal profiles used.

In this paper, a distributed architecture for the implementation of smart city has been proposed to facilitate various smart features like solid waste management, efficient urban mobility and public transport, smart parking, robust IT connectivity, safety and security of citizens and a roadmap for achieving it. How massive volume of IoT data can be analyzed and a layered architecture of IoT is explained. Why data integration is important for analyzing and processing of data collected by the different smart devices like sensors, actuators and RFIDs is discussed. The wireless sensor network can be used to sense the data from various locations but there has to be more to it than stuffing sensors everywhere for everything. Why only the sensor is not sufficient for data collection and how human beings can be used to collect data is explained. There is some communication protocols between the volunteers engaged in collecting data to restrict the sharing of data and ensure that the target area is covered with minimum numbers of volunteers. Every volunteer should cover some predefined area to collect data. Then the proposed architecture model is having one central server to store all data in a centralized server. The data processing and the processing of query being made by the user is taking place in centralized server.

With the globalization of integrated circuit design and manufacturing, Hardware Trojan have posed serious threats to the security of commercial chips. In this paper, we propose the framework of two-level temperature difference based thermal map analysis detection method. In our proposed method, thermal maps of an operating chip during a period are captured, and they are differentiated with the thermal maps of a golden model. Then every pixel's differential temperature of differential thermal maps is extracted and compared with other pixel's. To mitigate the Gaussian white noise and to differentiate the information of Hardware Trojan from the information of normal circuits, Kalman filter algorithm is involved. In our experiment, FPGAs configured with equivalent circuits are utilized to simulate the real chips to validate our proposed approach. The experimental result reveals that our proposed framework can detect Hardware Trojan whose power proportion magnitude is 10''3.

In this paper, machine learning attacks are performed on a novel hybrid delay based Arbiter Ring Oscillator PUF (AROPUF). The AROPUF exhibits improved results when compared to traditional Arbiter Physical Unclonable Function (APUF). The challenge-response pairs (CRPs) from both PUFs are fed to the multilayered perceptron model (MLP) with one hidden layer. The results show that the CRPs generated from the proposed AROPUF has more training and prediction errors when compared to the APUF, thus making it more difficult for the adversary to predict the CRPs.

Usually, the air gap will appear inside the composite insulators and it will lead to serious accident. In order to detect these internal defects in composite insulators operated in the transmission lines, a new non-destructive technique has been proposed. In the study, the mathematical analysis model of the composite insulators inner defects, which is about heat diffusion, has been build. The model helps to analyze the propagation process of heat loss and judge the structure and defects under the surface. Compared with traditional detection methods and other non-destructive techniques, the technique mentioned above has many advantages. In the study, air defects of composite insulators have been made artificially. Firstly, the artificially fabricated samples are tested by flash thermography, and this method shows a good performance to figure out the structure or defects under the surface. Compared the effect of different excitation between flash and hair drier, the artificially samples have a better performance after heating by flash. So the flash excitation is better. After testing by different pollution on the surface, it can be concluded that different pollution don't have much influence on figuring out the structure or defect under the surface, only have some influence on heat diffusion. Then the defective composite insulators from work site are detected and the image of defect is clear. This new active thermography system can be detected quickly, efficiently and accurately, ignoring the influence of different pollution and other environmental restrictions. So it will have a broad prospect of figuring out the defeats and structure in composite insulators even other styles of insulators.

5G, the fifth generation of mobile communication networks, is considered as one of the main IoT enablers. Connecting billions of things, 5G/IoT will be dealing with trillions of GBytes of data. Securing such large amounts of data is a very challenging task. Collected data varies from simple temperature measurements to more critical transaction data. Thus, applying uniform security measures is a waste of resources (processing, memory, and network bandwidth). Alternatively, a multi-level security model needs to be applied according to the varying requirements. In this paper, we present a multi-level security scheme (BLP) applied originally in the information security domain. We review its application in the network domain, and propose a modified version of BLP for the 5G/IoT case. The proposed model is proven to be secure and compliant with the model rules.

Cyber-physical systems (CPS) are interconnections of heterogeneous hardware and software components (e.g., sensors, actuators, physical systems/processes, computational nodes and controllers, and communication subsystems). Increasing network connectivity of CPS computational nodes facilitates maintenance and on-demand reprogrammability and reduces operator workload. However, such increasing connectivity also raises the potential for cyber-attacks that attempt unauthorized modifications of run-time parameters or control logic in the computational nodes to hamper process stability or performance. In this paper, we analyze the effectiveness of real-time monitoring using digital and analog side channels. While analog side channels might not typically provide sufficient granularity to observe each iteration of a periodic loop in the code in the CPS device, the temporal averaging inherent to side channel sensory modalities enables observation of persistent changes to the contents of a computational loop through their resulting effect on the level of activity of the device. Changes to code can be detected by observing readings from side channel sensors over a period of time. Experimental studies are performed on an ARM-based single board computer.

A lot of research in security of cyber physical systems focus on threat models where an attacker can spoof sensor readings by compromising the communication channel. A little focus is given to attacks on physical components. In this paper a method to detect potential attacks on physical components in a Cyber Physical System (CPS) is proposed. Physical attacks are detected through a comparison of noise pattern from sensor measurements to a reference noise pattern. If an adversary has physically modified or replaced a sensor, the proposed method issues an alert indicating that a sensor is probably compromised or is defective. A reference noise pattern is established from the sensor data using a deterministic model. This pattern is referred to as a fingerprint of the corresponding sensor. The fingerprint so derived is used as a reference to identify measured data during the operation of a CPS. Extensive experimentation with ultrasonic level sensors in a realistic water treatment testbed point to the effectiveness of the proposed fingerprinting method in detecting physical attacks.

Internet of Things (IoT) and its various application domains are radically changing the lives of people, providing smart services which will ultimately constitute integral components of the living environment. The services of IoT operate based on the data flows collected from the different sensors and actuators. In this respect, the correctness and security of the sensor data transported over the IoT system is a crucial factor in ensuring the correct functioning of the IoT services. In this work, we present a method that can detect abnormal sensor events based on “apriori” knowledge of the behavior of the monitored process. The main advantage of the proposed methodology is that it builds on well-established theoretical works, while delivering a practical technique with low computational requirements. As a result, the developed technique can be hosted on various components of an IoT system. The developed approach is evaluated through real-world use-cases.

The precise measurement of temperature is very important to the security and stability of the operation for a superconducting magnet. A slight fluctuation in the operating temperature may cause a superconducting magnet unstable. This paper presents a low-temperature measurement system based on C8051 Micro Controller Unit and Platinum resistance thermometer. In the process of data acquisition, a modified weighted average algorithm is applied to the digital filter program of the micro controller unit. The noise can be effectively reduced and can measure temperature of three different location points simultaneously, and there is no the interference among the three channels. The designed system could measure the temperature from 400 K to 4.0 K with a resolution of 1 mK. This system will be applied in a conduction cooling Nb3Al superconducting magnet. In order to certify the feasibility of the system, tests are performed in a small NbTi non-insulation superconducting magnet model. The results show that the measurement system is reliable and the measured temperature is accurate.

Denial-of-Service (DoS) attacks pose a threat to any service provider on the internet. While traditional DoS flooding attacks require the attacker to control at least as much resources as the service provider in order to be effective, so-called low-rate DoS attacks can exploit weaknesses in careless design to effectively deny a service using minimal amounts of network traffic. This paper investigates one such weakness found within version 2.2 of the popular Apache HTTP Server software. The weakness concerns how the server handles the persistent connection feature in HTTP 1.1. An attack simulator exploiting this weakness has been developed and shown to be effective. The attack was then studied with spectral analysis for the purpose of examining how well the attack could be detected. Similar to other papers on spectral analysis of low-rate DoS attacks, the results show that disproportionate amounts of energy in the lower frequencies can be detected when the attack is present. However, by randomizing the attack pattern, an attacker can efficiently reduce this disproportion to a degree where it might be impossible to correctly identify an attack in a real world scenario.

This scientific paper reveals an intelligent system for data acquisition for dam monitoring and diagnose. This system is built around the RS485 communication standard and uses its own communication protocol [2]. The aim of the system is to monitor all signal levels inside the communication bus, respectively to detect the out of action data loggers. The diagnose test extracts the following functional parameters: supply voltage and the absolute value and common mode value for differential signals used in data transmission (denoted with “A” and “B”). Analyzing this acquired information, it's possible to find short-circuits or open-circuits across the communication bus. The measurement and signal processing functions, for flaws, are implemented inside the system's central processing unit. The next testing step is finding the out of action data loggers and is being made by trying to communicate with every data logger inside the network. The lack of any response from a data logger is interpreted as an error and using the code of the data logger's microcontroller, it is possible to find its exact position inside the dam infrastructure. The novelty of this procedure is the fact that it completely automates the diagnose procedure, which, until now, was made visually by checking every data logger.