Biblio

This paper explores high throughput architectures for the substitution modules, which are an integral component of encryption algorithms. The security algorithms chosen belong to the category of lightweight crypto-primitives suitable for pervasive computing. The focus of this work is on the implementation of encryption algorithms on hardware platforms to improve speed and facilitate optimization in the area and power consumption of the design. In this work, the architecture for the encryption algorithms' substitution box (S-box) is modified using switching circuits (i.e., MUX-based) along with a logic generator and included in the overall cipher design. The modified architectures exhibit high throughput and consume less energy in comparison to the state-of-the-art designs. The percentage increase in throughput or maximum frequency differs according to the chosen algorithms discussed elaborately in this paper. The evaluation of various metrics specific to the design are executed at RFID-specific frequency so that they can be deployed in an IoT environment. The designs are mainly simulated and compared on Nexys4 DDR FPGA platform, along with a few other FPGAs, to meet similar design and implementation environments for a fair comparison. The application of the proposed S-box modification is explored for the healthcare scenario with promising results.

The design of efficient and secure cryptographic algorithms is a fundamental problem of cryptography. Due to the tight cost and constrained resources devices such as Radio-Frequency IDentification (RFID), wireless sensors, smart cards, health-care devices, lightweight cryptography has received a great deal of attention. Recent research mainly focused on designing optimized cryptographic algorithms which trade offs between security performance, time consuming, energy consumption and cost. In this paper, we present two chaotic stream ciphers based on chaos and we report the results of a comparative performance evaluation study. Compared to other crypto-systems of the literature, we demonstrate that our designed stream ciphers are suitable for practical secure applications of the Internet of Things (IoT) in a constrained resource environment.

As information and communication technologies evolve every day, so does the use of technology in our daily lives. Along with our increasing dependence on digital information assets, security vulnerabilities are becoming more and more apparent. Passwords are a critical component of secure access to digital systems and applications. They not only prevent unauthorized access to these systems, but also distinguish the users of such systems. Research on password predictability often relies on surveys or leaked data. Therefore, there is a gap in the literature for studies that consider real data in this regard. This study investigates the password security awareness of 161 computer engineering students enrolled in a Linux-based undergraduate course at Ataturk University. The study is conducted in two phases, and in the first phase, 12 dictionaries containing also real student data are formed. In the second phase of the study, a dictionary-based brute-force attack is utilized by means of a serial and parallel version of a Bash script to crack the students’ passwords. In this respect, the /etc/shadow file of the Linux system is used as a basis to compare the hashed versions of the guessed passwords. As a result, the passwords of 23 students, accounting for 14% of the entire student group, were cracked. We believe that this is an unacceptably high prediction rate for such a group with high digital literacy. Therefore, due to this important finding of the study, we took immediate action and shared the results of the study with the instructor responsible for administering the information security course that is included in our curriculum and offered in one of the following semesters.

Android controls the majority of the global OS market. Android Open Source Project (AOSP) is a very complex system with many layers including the apps, the Application Framework, the middle-ware, the customized Linux kernel, and the trusted components. Although security is implemented in every layer, the Application Framework forms an important of the attack surface due to managing the user interface and permissions. Android security has evolved over the years. The security flaws that have been found in the Application Framework led to a redesign of Android permissions. Part of this evolution includes fixes to the vulnerabilities that are publicly released in the monthly Android security bulletins. In this study, we analyze the CVEs listed in the Android security bulletin within the last 6 years. We focus on the Android application framework and investigate several research questions relating to 1) the security relevant components, 2) the type and amount of testing information for the security patches, and 3) the adequacy of the tests designed to test these patches. Our findings indicate that Android security testing practices can be further improved by designing security bulletin update specific tests, and by improving code coverage of patched files.

Nowadays, dynamic testing tools have significantly expedited the discovery of bugs in the Linux kernel. When unveiling kernel bugs, they automatically generate reports, specifying the errors the Linux encounters. The error in the report implies the possible exploitability of the corresponding kernel bug. As a result, many security analysts use the manifested error to infer a bug’s exploitability and thus prioritize their exploit development effort. However, using the error in the report, security researchers might underestimate a bug’s exploitability. The error exhibited in the report may depend upon how the bug is triggered. Through different paths or under different contexts, a bug may manifest various error behaviors implying very different exploitation potentials. This work proposes a new kernel fuzzing technique to explore all the possible error behaviors that a kernel bug might bring about. Unlike conventional kernel fuzzing techniques concentrating on kernel code coverage, our fuzzing technique is more directed towards the buggy code fragment. It introduces an object-driven kernel fuzzing technique to explore various contexts and paths to trigger the reported bug, making the bug manifest various error behaviors. With the newly demonstrated errors, security researchers could better infer a bug’s possible exploitability. To evaluate our proposed technique’s effectiveness, efficiency, and impact, we implement our fuzzing technique as a tool GREBE and apply it to 60 real-world Linux kernel bugs. On average, GREBE could manifest 2+ additional error behaviors for each of the kernel bugs. For 26 kernel bugs, GREBE discovers higher exploitation potential. We report to kernel vendors some of the bugs – the exploitability of which was wrongly assessed and the corresponding patch has not yet been carefully applied – resulting in their rapid patch adoption.

Operating systems are essential software components for any computer. The goal of computer system manu-facturers is to provide a safe operating system that can resist a range of assaults. APTs (Advanced Persistent Threats) are merely one kind of attack used by hackers to penetrate organisations (APT). Here, we will apply the MITRE ATT&CK approach to analyze the security of Windows and Linux. Using the results of a series of vulnerability tests conducted on Windows 7, 8, 10, and Windows Server 2012, as well as Linux 16.04, 18.04, and its most current version, we can establish which operating system offers the most protection against future assaults. In addition, we have shown adversarial reflection in response to threats. We used ATT &CK framework tools to launch attacks on both platforms.

We demonstrate an in-house built Endpoint Detection and Response (EDR) for linux systems using open-sourced tools like Osquery and Elastic. The advantage of building an in-house EDR tools against using commercial EDR tools provides both the knowledge and the technical capability to detect and investigate security incidents. We discuss the architecture of the tools and advantages it offers. Specifically, in our method all the endpoint logs are collected at a common server which we leverage to perform correlation between events happening on different endpoints and automatically detect threats like pivoting and lateral movements. We discuss various attacks that can be detected by our tool.

Smart building security systems typically consist of sensors and controllers that monitor power operating systems, alarms, camera monitoring, access controls, and many other important information and security systems. These systems are managed and controlled through online platforms. A successful attack on one of these platforms may result in the failure of one or more critical intelligent systems in the building. In this paper, the security requirements in the application layer of any IoT system were discussed, in particular the role of IoT platforms in dealing with the security problems that smart buildings are exposed to and the extent of their strength to reduce the attacks they are exposed to, where an experimental platform was designed to test the presence of security vulnerabilities and This was done by using the Zed Attack Proxy (ZAP) tool, according to the OWASP standards and security level assessment, and the importance of this paper comes as a contribution to providing information about the most famous IoT platforms and stimulating work to explore security concerns in IoT-based platforms.

Recently, as the use of Internet of Things (IoT) devices has expanded, security issues have emerged. As a solution to the IoT security problem, PUF (Physical Unclonable Function) technology has been proposed, and research on key generation or device authentication using it has been actively conducted. In this paper, we propose a method to apply PUF-based device authentication technology to the Open Connectivity Foundation (OCF) open platform. The proposed method can greatly improve the security level of IoT open platform by utilizing PUF technology.

While 5G Edge Computing along with IoT technology has transformed the future of healthcare data transmission, it presents security vulnerabilities and risks when transmitting patients' confidential information. Currently, there are very few reliable security solutions available for healthcare data that routes through SDN routers in 5G Edge Computing. These solutions do not provide cryptographic security from IoT sensor devices. In this paper, we studied how 5G edge computing integrated with IoT network helps healthcare data transmission for remote medical treatment, explored security risks associated with unsecured data transmission, and finally proposed a cryptographic end-to-end security solution initiated at IoT sensor devices and routed through SDN routers. Our proposed solution with cryptographic security initiated at IoT sensor goes through SDN control plane and data plane in 5G edge computing and provides an end-to-end secured communication from IoT device to doctor's office. A prototype built with two-layer encrypted communication has been lab tested with promising results. This analysis will help future security implementation for eHealth in 5G and beyond networks.

The Domain Name System (DNS) is critical to Internet communications. EDNS Client Subnet (ECS), a DNS extension, allows recursive resolvers to include client subnet information in DNS queries to improve CDN end-user mapping, extending the visibility of client information to a broader range. Major content delivery network (CDN) vendors, content providers (CP), and public DNS service providers (PDNS) are accelerating their IPv6 infrastructure development. With the increasing deployment of IPv6-enabled services and DNS being the most foundational system of the Internet, it becomes important to analyze the behavioral and privacy status of IPv6 resolvers. However, there is a lack of research on ECS for IPv6 DNS resolvers.In this paper, we study the ECS deployment and compliance status of IPv6 resolvers. Our measurement shows that 11.12% IPv6 open resolvers implement ECS. We discuss abnormal noncompliant scenarios that exist in both IPv6 and IPv4 that raise privacy and performance issues. Additionally, we measured if the sacrifice of clients’ privacy can enhance IPv6 CDN performance. We find that in some cases ECS helps end-user mapping but with an unnecessary privacy loss. And even worse, the exposure of client address information can sometimes backfire, which deserves attention from both Internet users and PDNSes.

The spread of the Internet of Things (IoT) and cloud services leads to a request for secure communication between devices, known as zero-trust security. The authors have been developing CYber PHysical Overlay Network over Internet Communication (CYPHONIC) to realize secure end-to-end communication among devices. A device requires installing the client program into the devices to realize secure communication over our overlay network. However, some devices refuse additional installation of external programs due to the limitation of system and hardware resources or the effect on system reliability. We proposed new technology, a CYPHONIC adapter, to support these devices. Currently, the CYPHONIC adapter supports only IPv4 virtual addresses and needs to be compatible with general devices that use IPv6. This paper proposes the dual-stack CYPHONIC adapter supporting IPv4/IPv6 virtual addresses for general devices. The prototype implementation shows that the general device can communicate over our overlay network using both IP versions through the proposed CYPHONIC adapter.

Protecting an identity of IPv6 packet against Denial-of-Service (DoS) attack, depend on the proposed methods of cryptography and steganography. Reliable communication using the security aspect is the most visible issue, particularly in IPv6 network applications. Problems such as DoS attacks, IP spoofing and other kinds of passive attacks are common. This paper suggests an approach based on generating a randomly unique identities for every node. The generated identity is encrypted and hided in the transmitted packets of the sender side. In the receiver side, the received packet verified to identify the source before processed. Also, the paper involves implementing nine experiments that are used to test the proposed scheme. The scheme is based on creating the address of IPv6, then passing it to the logistics map then encrypted by RSA and authenticated by SHA2. In addition, network performance is computed by OPNET modular. The results showed better computation power consumption in case of lost packet, average events, memory and time, and the better results as total memory is 35,523 KB, average events/sec is 250,52, traffic sent is 30,324 packets/sec, traffic received is 27,227 packets/sec, and lose packets is 3,097 packets/sec.

Based on the campus wireless IPv6 network system, using WiFi contactless sensing and positioning technology and action recognition technology, this paper designs a new campus security early warning system. The characteristic is that there is no need to add new monitoring equipment. As long as it is the location covered by the wireless IPv6 network, personnel quantity statistics and personnel body action status display can be realized. It plays an effective monitoring supplement to the places that cannot be covered by video surveillance in the past, and can effectively prevent campus violence or other emergencies.

This paper uses the test tool provided by the Internet Protocol Version 6 (IPv6) Forum to test the protocol conformance of IPv6 devices. The installation and testing process of IPv6 Ready Logo protocol conformance test suite developed by TAHI PROJECT team is described in detail. This section describes the test content and evaluation criteria of the suite, analyzes the problems encountered during the installation and use of the suite, describes the method of analyzing the test results of the suite, and describes the test content added to the latest version of the test suite. The test suite can realize automatic testing, the test cases accurately reflect the requirements of the IPv6 protocol specification, can be used to judge whether IPv6-based Internet of Things(IoT) devices meets the relevant protocol standards.

For the smart campus of Guangdong Ocean University, we analyze the current situation of the university's network construction, as well as the problems in infrastructure, equipment, operation management, and network security. We focus on the construction objectives and design scheme of the smart campus, including the design of network structure and basic network services. The followings are considered in this study: optimization of network structure simplification, business integration, multi-operator access environment, operation and maintenance guarantee system, organic integration of production, and teaching and research after network leveling transformation.

With the global transition to the IPv6 (Internet Protocol version 6), IP (Internet Protocol) validation efficiency and IPv6 support from the aspect of network programming are gaining more importance. As global computer networks grow in the era of IoT (Internet of Things), IP address validation is an inevitable process for assuring strong network privacy and security. The complexity of IP validation has been increased due to the rather drastic change in the memory architecture needed for storing IPv6 addresses. Low-level programming languages like C/C++ are a great choice for handling memory spaces and working with simple devices connected in an IoT (Internet of Things) network. This paper analyzes some user-defined and open-source implementations of IP validation codes in Boost. Asio and POCO C++ networking libraries, as well as the IP security support provided for general networking purposes and IoT. Considering a couple of sample codes, the paper gives a conclusion on whether these C++ implementations answer the needs for flexibility and security of the upcoming era of IPv6 addressed computers.

Internet Protocol Version 6 (IPv6) is expected for widespread deployment worldwide. Such rapid development of IPv6 may lead to safety problems. The main threats in IPv6 networks are denial of service (DoS) attacks and distributed DoS (DDoS) attacks. In addition to the similar threats in Internet Protocol Version 4 (IPv4), IPv6 has introduced new potential vulnerabilities, which are DoS and DDoS attacks based on Internet Control Message Protocol version 6 (ICMPv6). We divide such new attacks into two categories: pure flooding attacks and source address spoofing attacks. We propose P4-NSAF, a scheme to defend against the above two IPv6 DoS and DDoS attacks in the programmable data plane. P4-NSAF uses Count-Min Sketch to defend against flooding attacks and records information about IPv6 agents into match tables to prevent source address spoofing attacks. We implement a prototype of P4-NSAF with P4 and evaluate it in the programmable data plane. The result suggests that P4-NSAF can effectively protect IPv6 networks from DoS and DDoS attacks based on ICMPv6.

State of the art Artificial Intelligence Assurance (AIA) methods validate AI systems based on predefined goals and standards, are applied within a given domain, and are designed for a specific AI algorithm. Existing works do not provide information on assuring subjective AI goals such as fairness and trustworthiness. Other assurance goals are frequently required in an intelligent deployment, including explainability, safety, and security. Accordingly, issues such as value loading, generalization, context, and scalability arise; however, achieving multiple assurance goals without major trade-offs is generally deemed an unattainable task. In this manuscript, we present two AIA pipelines that are model-agnostic, independent of the domain (such as: healthcare, energy, banking), and provide scores for AIA goals including explainability, safety, and security. The two pipelines: Adversarial Logging Scoring Pipeline (ALSP) and Requirements Feedback Scoring Pipeline (RFSP) are scalable and tested with multiple use cases, such as a water distribution network and a telecommunications network, to illustrate their benefits. ALSP optimizes models using a game theory approach and it also logs and scores the actions of an AI model to detect adversarial inputs, and assures the datasets used for training. RFSP identifies the best hyper-parameters using a Bayesian approach and provides assurance scores for subjective goals such as ethical AI using user inputs and statistical assurance measures. Each pipeline has three algorithms that enforce the final assurance scores and other outcomes. Unlike ALSP (which is a parallel process), RFSP is user-driven and its actions are sequential. Data are collected for experimentation; the results of both pipelines are presented and contrasted.

For modern Automatic Test Equipment (ATE), one of the most daunting tasks conducting Information Assurance (IA). In addition, there is a desire to Network ATE to allow for information sharing and deployment of software. This is complicated by the fact that typically ATE are “unmanaged” systems in that most are configured, deployed, and then mostly left alone. This results in systems that are not patched with the latest Operating System updates and in fact may be running on legacy Operating Systems which are no longer supported (like Windows XP or Windows 7 for instance). A lot of this has to do with the cost of keeping a system updated on a continuous basis and regression testing the Test Program Sets (TPS) that run on them. Given that an Automated Test System can have thousands of Test Programs running on it, the cost and time involved in doing complete regression testing on all the Test Programs can be extremely expensive. In addition to the Test Programs themselves some Test Programs rely on third party Software and / or custom developed software that is required for the Test Programs to run. Add to this the requirement to perform software steering through all the Test Program paths, the length of time required to validate a Test Program could be measured in months in some cases. If system updates are performed once a month like some Operating System updates this could consume all the available time of the Test Station or require a fleet of Test Stations to be dedicated just to do the required regression testing. On the other side of the coin, a Test System running an old unpatched Operating System is a prime target for any manner of virus or other IA issues. This paper will discuss some of the pro's and con's of a managed Test System and how it might be accomplished.

The use of software to support the information infrastructure that governments, critical infrastructure providers and businesses worldwide rely on for their daily operations and business processes is gradually becoming unavoidable. Commercial off-the shelf software is widely and increasingly used by these organizations to automate processes with information technology. That notwithstanding, cyber-attacks are becoming stealthier and more sophisticated, which has led to a complex and dynamic risk environment for IT-based operations which users are working to better understand and manage. This has made users become increasingly concerned about the integrity, security and reliability of commercial software. To meet up with these concerns and meet customer requirements, vendors have undertaken significant efforts to reduce vulnerabilities, improve resistance to attack and protect the integrity of the products they sell. These efforts are often referred to as “software assurance.” Software assurance is becoming very important for organizations critical to public safety and economic and national security. These users require a high level of confidence that commercial software is as secure as possible, something only achieved when software is created using best practices for secure software development. Therefore, in this paper, we explore the need for information assurance and its importance for both organizations and end users, methodologies and best practices for software security and information assurance, and we also conducted a survey to understand end users’ opinions on the methodologies researched in this paper and their impact.

Software quality assurance (SQA) is a means and practice of monitoring the software engineering processes and methods used in a project to ensure proper quality of the software. It encompasses the entire software development life-cycle, including requirements engineering, software design, coding, source code reviews, software configuration management, testing , release management, software deployment and software integration. It is organized into goals, commitments, abilities, activities, measurements, verification and validation. In this talk, we will mainly focus on the testing activity part of the software development life-cycle. Its main objective is checking that software is satisfying a set of quality properties that are identified by the "ISO/IEC 25010:2011 System and Software Quality Model" standard [1] .

Wireless Sensor Networks (WSN) have assisted applications of multi-agent system. Abundant sensor nodes, densely distributed around a base station (BS), collect data and transmit to BS node for data analysis. The concept of cluster has been emerged as the efficient communication structure in resource-constrained environment. However, the security still remains a major concern due to the vulnerability of sensor nodes. In this paper, we propose a percolation-based secure routing protocol. We leverage the trust score composed of three indexes to select cluster heads (CH) for unevenly distributed clusters. By considering the reliability, centrality and stability, legitimate nodes with social trust and adequate energy are chosen to provide relay service. Moreover, we design a multi-path inter-cluster routing protocol to construct CH chains for directed inter-cluster data transmission based on the percolation. And the measurement of transit score for on-path CH nodes contributes to load balancing and security. Our simulation results show that our protocol is able to guarantee the security to improve the delivery ratio and packets delay.

In financial markets such as stock markets, securities are traded at a price where supply equals demand. Behind the impediments to the short-selling of stock, most participants in the stock market are buyers, so trades are more probable at higher prices than in situations without such restrictions. However, the order imbalance that occurs when buy orders exceed sell orders can change due to many factors. Hence, it is insufficient to discuss the effects of order imbalance caused by impediments to short-selling on the stock price only through empirical studies. Our study used an artificial market to investigate the effects on traded price and quantity of limit orders. The simulation results revealed that the order imbalance when buy orders exceed sell orders increases the traded price and results in fewer quantities of limit sell orders than limit buy orders. In particular, when the sell/buy ratio of the order imbalance model is less than or equal to 0.9, the limit sell/buy ratio becomes lower than that. Lastly, we investigated the mechanisms of the effects on traded price and quantity of limit orders.

The development of autonomous agents have gained renewed interest, largely due to the recent successes of machine learning. Social robots can be considered a special class of autonomous agents that are often intended to be integrated into sensitive environments. We present experiences from our work with two specific humanoid social service robots, and highlight how eschewing privacy and security by design principles leads to implementations with serious privacy and security flaws. The paper introduces the robots as platforms and their associated features, ecosystems and cloud platforms that are required for certain use cases or tasks. The paper encourages design aims for privacy and security, and then in this light studies the implementation from two different manufacturers. The results show a worrisome lack of design focus in handling privacy and security. The paper aims not to cover all the security flaws and possible mitigations, but does look closer into the use of the WebSocket protocol and it’s challenges when used for operational control. The conclusions of the paper provide insights on how manufacturers can rectify the discovered security flaws and presents key policies like accountability when it comes to implementing technical features of autonomous agents.