Biblio

The Internet, originally an academic network for the rapid exchange of information, has moved over time into the commercial media, business and later industrial communications environment. Recently, it has been included as a part of cyberspace as a combat domain. Any device connected to the unprotected Internet is thus exposed to possible attacks by various groups and individuals pursuing various criminal, security and political objectives. Therefore, each such device must be set up to be as resistant as possible to these attacks. For the implementation of small home, academic or industrial systems, people very often use small computing system Raspberry PI, which is usually equipped with the operating system Raspbian Linux. Such a device is often connected to an unprotected Internet environment and if successfully attacked, can act as a gateway for an attacker to enter the internal network of an organization or home. This paper deals with security configuration of Raspbian Linux operating system for operation on public IP addresses in an unprotected Internet environment. The content of this paper is the conduction and analysis of an experiment in which five Raspbian Linux/Raspberry PI accounts were created with varying security levels; the easiest to attack is a simulation of the device of a user who has left the system without additional security. The accounts that follow gradually add further protection and security. These accounts are used to simulate a variety of experienced users, and in a practical experiment the effects of these security measures are evaluated; such as the number of successful / unsuccessful attacks; where the attacks are from; the type and intensity of the attacks; and the target of the attack. The results of this experiment lead to formulated conclusions containing an analysis of the attack and subsequent design recommendations and settings to secure such a device. The subsequent section of the paper discusses the implementation of a simple TCP server that is configured to listen to incoming traffic on preset ports; it simulates the behaviour of selected services on these ports. This server's task is to intercept unauthorized connection attempts to these ports and intercepting attempts to communicate or attack these services. These recorded attack attempts are analyzed in detail and formulated in the conclusion, including implications for the security settings of such a device. The overall result of this paper is the recommended set up of operating system Raspbian Linux to work on public IP addresses in an unfiltered Internet environment.

With the rapid development of the Internet, network traffic is becoming more complex and diverse. At the same time, malicious traffic is growing. This seriously threatens the security of networks and information. However, the current DPI (Deep Packet Inspect) engine based on x86 architecture is slow in monitoring speed, which cannot meet the needs. Generally, two factors affect the detection rate: CPU and memory; The efficiency of data packet acquisition, and multi regular expression matching. Under these circumstances, this paper presents an efficient implementation of the DPI engine based on a generic x86 platform. DPDK is used as the platform of network data packets acquisition and processing. Using the multi-queue of the NIC (network interface controller) and the customized symmetric RSS key, the network traffic is divided and reorganized in the form of conversation. The core of traffic identification is hyperscan, which uses a flow pattern to match the packets load of a single conversation efficiently. It greatly reduces memory requirements. The method makes full use of the system resources and takes into account the advantages of high efficiency of hardware implementation. And it has a remarkable improvement in the efficiency of recognition.

This paper outlines an approach to build an Intrusion detection system for a network interface device. This research work has developed a hybrid intrusion detection system which involves various machine learning techniques along with inference detection for a comparative analysis. It is explained in 2 phases: Training (Model Training and Inference Network Building) and Detection phase (Working phase). This aims to solve all the current real-life problem that exists in machine learning algorithms as machine learning techniques are stiff they have their respective classification region outside which they cease to work properly. This paper aims to provide the best working machine learning technique out of the many used. The machine learning techniques used in comparative analysis are Decision Tree, Naïve Bayes, K-Nearest Neighbors (KNN) and Support Vector Machines (SVM) along with NSLKDD dataset for testing and training of our Network Intrusion Detection Model. The accuracy recorded for Decision Tree, Naïve Bayes, K-Nearest Neighbors (KNN) and Support Vector Machines(SVM) respectively when tested independently are 98.088%, 82.971%, 95.75%, 81.971% and when tested with inference detection model are 98.554%, 66.687%, 97.605%, 93.914%. Therefore, it can be concluded that our inference detection model helps in improving certain factors which are not detected using conventional machine learning techniques.

This paper presents a self-securing decentralized on-chip network interface (NI) architecture to Multicore System-on-Chip (McSoC) platforms. To protect intra-chip communication within McSoC, security framework proposal resides in initiator and target NIs. A comparison between block cipher and lightweight cryptographic algorithms is then given, so we can figure out the most suitable cipher for network-on-chip (NoC) architectures. AES and LED security algorithms was a subject of this comparison. The designs are developed in Xilinx ISE 14.7 tool using VHDL language.

Functionally safe control logic design without full duplication is difficult due to the complexity of random control logic. The Reorder buffer (ROB) is a control logic function commonly used in high performance computing systems. In this study, we focus on a safe ROB design used in an industry quality Network-on-Chip (NoC) Advanced eXtensible Interface (AXI) Network Interface (NI) block. We developed and applied area efficient safe design techniques including partial duplication, Error Detection Code (EDC) and invariance checking with formal proofs and showed that we can achieve a desired safe Diagnostic Coverage (DC) requirement with small area and power overheads and no performance degradation.

Software Defined Network (SDN) is a revolutionary networking paradigm which provides the flexibility of programming the network interface as per the need and demand of the user. Software Defined Network (SDN) is independent of vendor specific hardware or protocols and offers the easy extensions in the networking. A customized network as per on user demand facilitates communication control via a single entity i.e. SDN controller. Due to this SDN Controller has become more vulnerable to SDN security attacks and more specifically a single point of failure. It is worth noticing that vulnerabilities were identified because of customized applications which are semi-independent of underlying network infrastructure. No doubt, SDN has provided numerous benefits like breaking vendor lock-ins, reducing overhead cost, easy innovations, increasing programmability among devices, introducing new features and so on. But security of SDN cannot be neglected and it has become a major topic of debate. The communication channel used in SDN is OpenFlow which has made TLS implementation an optional approach in SDN. TLS adoption is important and still vulnerable. This paper focuses on making SDN OpenFlow communication more secure by following extended TLS support and defensive algorithm.

In many-core systems, the processing elements are interconnected using Networks-on-Chip. An example of on-chip network is SoCIN, a low-cost interconnect architecture whose original design did not take into account security aspects. This network is vulnerable to eavesdropping and spoofing attacks, what limits its use in systems that require security. This work addresses this issue and aims to ensure the security properties of confidentiality and authenticity of SoCIN-based systems. For this, we propose the use of security mechanisms based on symmetric encryption at the network level using the AES (Advanced Encryption Standard) model. A reference multi-core platform was implemented and prototyped in programmable logic aiming at performing experiments to evaluate the implemented mechanisms. Results demonstrate the effectiveness of the proposed solution in protecting the system against the target attacks. The impact on the network performance is acceptable and the silicon overhead is equivalent to other solutions found in the literature.

The anonymizing network Tor is examined as one method of anonymizing port scanning tools and avoiding identification and retaliation. Performing anonymized port scans through Tor is possible using Nmap, but parallelization of the scanning processes is required to accelerate the scan rate.

The explosive growth of IT infrastructures, cloud systems, and Internet of Things (IoT) have resulted in complex systems that are extremely difficult to secure and protect against cyberattacks which are growing exponentially in complexity and in number. Overcoming the cybersecurity challenges is even more complicated due to the lack of training and widely available cybersecurity environments to experiment with and evaluate new cybersecurity methods. The goal of our research is to address these challenges by exploiting cloud services. In this paper, we present the design, analysis, and evaluation of a cloud service that we refer to as Cybersecurity Lab as a Service (CLaaS) which offers virtual cybersecurity experiments that can be accessed from anywhere and from any device (desktop, laptop, tablet, smart mobile device, etc.) with Internet connectivity. In CLaaS, we exploit cloud computing systems and virtualization technologies to provide virtual cybersecurity experiments and hands-on experiences on how vulnerabilities are exploited to launch cyberattacks, how they can be removed, and how cyber resources and services can be hardened or better protected. We also present our experimental results and evaluation of CLaaS virtual cybersecurity experiments that have been used by graduate students taking our cybersecurity class as well as by high school students participating in GenCyber camps.

The proliferation of digital devices in a networked industrial ecosystem, along with an exponential growth in complexity and scope, has resulted in elevated security concerns and management complexity issues. This paper describes a novel architecture utilizing concepts of autonomic computing and a simple object access protocol (SOAP)-based interface to metadata access points (IF-MAP) external communication layer to create a network security sensor. This approach simplifies integration of legacy software and supports a secure, scalable, and self-managed framework. The contribution of this paper is twofold: 1) A flexible two-level communication layer based on autonomic computing and service oriented architecture is detailed and 2) three complementary modules that dynamically reconfigure in response to a changing environment are presented. One module utilizes clustering and fuzzy logic to monitor traffic for abnormal behavior. Another module passively monitors network traffic and deploys deceptive virtual network hosts. These components of the sensor system were implemented in C++ and PERL and utilize a common internal D-Bus communication mechanism. A proof of concept prototype was deployed on a mixed-use test network showing the possible real-world applicability. In testing, 45 of the 46 network attached devices were recognized and 10 of the 12 emulated devices were created with specific operating system and port configurations. In addition, the anomaly detection algorithm achieved a 99.9% recognition rate. All output from the modules were correctly distributed using the common communication structure.

The proliferation of digital devices in a networked industrial ecosystem, along with an exponential growth in complexity and scope, has resulted in elevated security concerns and management complexity issues. This paper describes a novel architecture utilizing concepts of autonomic computing and a simple object access protocol (SOAP)-based interface to metadata access points (IF-MAP) external communication layer to create a network security sensor. This approach simplifies integration of legacy software and supports a secure, scalable, and self-managed framework. The contribution of this paper is twofold: 1) A flexible two-level communication layer based on autonomic computing and service oriented architecture is detailed and 2) three complementary modules that dynamically reconfigure in response to a changing environment are presented. One module utilizes clustering and fuzzy logic to monitor traffic for abnormal behavior. Another module passively monitors network traffic and deploys deceptive virtual network hosts. These components of the sensor system were implemented in C++ and PERL and utilize a common internal D-Bus communication mechanism. A proof of concept prototype was deployed on a mixed-use test network showing the possible real-world applicability. In testing, 45 of the 46 network attached devices were recognized and 10 of the 12 emulated devices were created with specific operating system and port configurations. In addition, the anomaly detection algorithm achieved a 99.9% recognition rate. All output from the modules were correctly distributed using the common communication structure.

Wide-area monitoring and control (WAMC) systems are the next-generation operational-management systems for electric power systems. The main purpose of such systems is to provide high resolution real-time situational awareness in order to improve the operation of the power system by detecting and responding to fast evolving phenomenon in power systems. From an information and communication technology (ICT) perspective, the nonfunctional qualities of these systems are increasingly becoming important and there is a need to evaluate and analyze the factors that impact these nonfunctional qualities. Enterprise architecture methods, which capture properties of ICT systems in architecture models and use these models as a basis for analysis and decision making, are a promising approach to meet these challenges. This paper presents a quantitative architecture analysis method for the study of WAMC ICT architectures focusing primarily on the interoperability and cybersecurity aspects.