Biblio

The growing popularity of Android and the increasing amount of sensitive data stored in mobile devices have lead to the dissemination of Android ransomware. Ransomware is a class of malware that makes data inaccessible by blocking access to the device or, more frequently, by encrypting the data; to recover the data, the user has to pay a ransom to the attacker. A solution for this problem is to backup the data. Although backup tools are available for Android, these tools may be compromised or blocked by the ransomware itself. This paper presents the design and implementation of RANSOMSAFEDROID, a TrustZone based backup service for mobile devices. RANSOMSAFEDROID is protected from malware by leveraging the ARM TrustZone extension and running in the secure world. It does backup of files periodically to a secure local persistent partition and pushes these backups to external storage to protect them from ransomware. Initially, RANSOMSAFEDROID does a full backup of the device filesystem, then it does incremental backups that save the changes since the last backup. As a proof-of-concept, we implemented a RANSOMSAFEDROID prototype and provide a performance evaluation using an i.MX53 development board.

Mobile apps are widely adopted in daily life, and contain increasing security flaws. Many regulatory agencies and organizations have announced security guidelines for app development. However, most security guidelines involving technicality and compliance with this requirement is not easily feasible. Thus, we propose Mobile Apps Assessment and Analysis System (MAS), an automatic security validation system to improve guideline compliance. MAS combines static and dynamic analysis techniques, which can be used to verify whether android apps meet the security guideline requirements. We implemented MAS in practice and verified 143 real-world apps produced by the Taiwan government. Besides, we also validated 15,000 popular apps collected from Google Play Store produced in three countries. We found that most apps contain at least three security issues. Finally, we summarize the results and list the most common security flaws for consideration in further app development.

Mobile attack approaches can be categorized as Application Based Attacks and Frequency Based Attacks. Application based attacks are reviewed extensively in the literature. However, frequency based attacks to mobile phones are not experimented in detail. In this work, we have experimentally succeeded to attack an Android smartphone using a simple software based radio circuit. We have developed a software “Primary Mobile Hack Builder” to control Android operated cellphone as a distance. The SMS information and pictures in the cellphone can be obtained using this device. On the other hand, after launching a software into targeting cellphone, the camera of the cellphone can be controlled for taking pictures and downloading them into our computers. It was also possible to eavesdropping the conversation.

The state-of-the-art Android malware often encrypts or encodes malicious code snippets to evade malware detection. In this paper, such undetectable codes are called Mysterious Codes. To make such codes detectable, we design a system called Droidrevealer to automatically identify Mysterious Codes and then decode or decrypt them. The prototype of Droidrevealer is implemented and evaluated with 5,600 malwares. The results show that 257 samples contain the Mysterious Codes and 11,367 items are exposed. Furthermore, several sensitive behaviors hidden in the Mysterious Codes are disclosed by Droidrevealer.

With Android application packing technology evolving, there are more and more ways to harden APPs. Manually unpacking APPs becomes more difficult as the time needed for analyzing increase exponentially. At the beginning, the packing technology is designed to prevent APPs from being easily decompiled, tampered and re-packed. But unfortunately, many malicious APPs start to use packing service to protect themselves. At present, most of the antivirus software focus on APPs that are unpacked, which means if malicious APPs apply the packing service, they can easily escape from a lot of antivirus software. Therefore, we should not only emphasize the importance of packing, but also concentrate on the unpacking technology. Only by doing this can we protect the normal APPs, and not miss any harmful APPs at the same time. In this paper, we first systematically study a lot of DEX packing and unpacking technologies, then propose and develop a universal unpacking system, named CrackDex, which is capable of extracting the original DEX file from the packed APP. We propose three core technologies: simulation execution, DEX reassembling, and DEX restoration, to get the unpacked DEX file. CrackDex is a part of the Dalvik virtual machine, and it monitors the execution of functions to locate the unpacking point in the portable interpreter, then launches the simulation execution, collects the data of original DEX file through corresponding structure pointer, finally fulfills the unpacking process by reassembling the data collected. The results of our experiments show that CrackDex can be used to effectively unpack APPs that are packed by packing service in a universal approach without any other knowledge of packing service.

For mobile phone users, short message service (SMS) is the most commonly used text-based communication type on mobile devices. Users can interact with other users and services via SMS. For example, users can send private messages, use information services, apply for a job advertisement, conduct bank transactions, and so on. Users should be very careful when using SMS. During the sending of SMS, the message content should be aware that it can be captured and act accordingly. Based on these findings, the elderly, called as “Silent Generation” which represents 70 years or older adults, are text messaging much more than they did in the past. Therefore, they need solutions which are both simple and secure enough if there is a need to send sensitive information via SMS. In this study, we propose and develop an android application to secure text messages. The application has a simple and easy-to-use graphical user interface but provides significant security.

The symmetric block ciphers, which represent a core element for building cryptographic communications systems and protocols, are used in providing message confidentiality, authentication and integrity. Various limitations in hardware and software resources, especially in terminal devices used in mobile communications, affect the selection of appropriate cryptosystem and its parameters. In this paper, an implementation of three symmetric ciphers (DES, 3DES, AES) used in different operating modes are analyzed on Android platform. The cryptosystems' performance is analyzed in different scenarios using several variable parameters: cipher, key size, plaintext size and number of threads. Also, the influence of parallelization supported by multi-core CPUs on cryptosystem performance is analyzed. Finally, some conclusions about the parameter selection for optimal efficiency are given.

The rapid growth of science and technology in the telecommunications world can come up with new ways for some people bent on abusing for threatening information security as hackers, crackers, carder, phreaker and so on. If the information is on the wrong side will result in losses. Information that must be considered is the security of confidential information. Steganography is a method that can be used to hide a message by using digital media. Digital Steganography using digital media as the container vessel such as images, sounds, text, and video. Hidden secret data can also include images, audio, text, and video. In this final audio steganography implemented. One method that can be used in steganography is the Least Significant Bit (LSB). Steganography implementation will be accompanied by the application of cryptography in the form of encryption and decryption. This method works is messages that have been encrypted beforehand will be hidden evenly on each region in MP3 or WAV already divided, with modify / change the LSB of the media container with the bits of information to be hidden. In making the steganography application, the author uses the Java programming language eclipse, because the program is quite easy and can be run in the Android smartphone operating system.

Interchange of information through cell phones, Tabs and PDAs (Personal Digital Assistant) is the new trend in the era of digitization. In day-to-day activities, sensitive information through mobile phones is exchanged among the users. This sensitive information can be in the form of text messages, images, location, etc. The research on Android mobile applications was done at the MIT, and found that applications are leaking enormous amount of information to the third party servers. 73 percent of 55 Android applications were detected to leak personal information of the users [8]. Transmission of files securely on Android is a big issue. Therefore it is important to shield the privacy of user data on Android operating system. The main motive of this paper is to protect the privacy of data on Android Platform by allowing transmission of textual data, location, pictures in encrypted format. By doing so, we achieved intimacy and integrity of data.

In this paper, we propose a lightweight multi-receiver encryption scheme for the device to device communications on Internet of Things (IoT) applications. In order for the individual user to control the disclosure range of his/her own data directly and to prevent sensitive personal data disclosure to the trusted third party, the proposed scheme uses device-generated public keys. For mutual authentication, third party generates Schnorr-like lightweight identity-based partial private keys for users. The proposed scheme provides source authentication, message integrity, replay-attack prevention and implicit user authentication. In addition to more security properties, computation expensive pairing operations are eliminated to achieve less time usage for both sender and receiver, which is favourable property for IoT applications. In this paper, we showed a proof of security of our scheme, computational cost comparison and experimental performance evaluations. We implemented our proposed scheme on real embedded Android devices and confirmed that it achieves less time cost for both encryption and decryption comparing with the existing most efficient certificate-based multi-receiver encryption scheme and certificateless multi-receiver encryption scheme.

This paper presents a new fractional-order hidden strange attractor generated by a chaotic system without equilibria. The proposed non-equilibrium fractional-order chaotic system (FOCS) is asymmetric, dissimilar, topologically inequivalent to typical chaotic systems and challenges the conventional notion that the presence of unstable equilibria is mandatory to ensure the existence of chaos. The new fractional-order model displays rich bifurcation undergoing a period doubling route to chaos, where the fractional order α is the bifurcation parameter. Study of the hidden attractor dynamics is carried out with the aid of phase portraits, sensitivity to initial conditions, fractal Lyapunov dimension, maximum Lyapunov exponents spectrum and bifurcation analysis. The minimum commensurate dimension to display chaos is determined. With a view to utilizing it in chaos based cryptology and coding information, a synchronisation control scheme is designed. Finally the theoretical analyses are validated by numerical simulation results which are in good agreement with the former.

The chips in working state have electromagnetic energy leakage problem. We offer a method to analyze the problem of electromagnetic leakage when the chip is running. We execute a sequence of addition and subtraction arithmetic instructions on FPGA chip, then we use the near-field probe to capture the chip leakage of electromagnetic signals. The electromagnetic signal is collected for analysis and processing, the parts of addition and subtraction are classified and identified by SVM. In this paper, for the problem of electromagnetic leakage, six sets of data were collected for analysis and processing. Good results were obtained by using this method.

This paper proposed a feedback shift register structure which can be split, it is based on a research of operating characteristics about 70 kinds of cryptographic algorithms and the research shows that the “different operations similar structure” reconfigurable design is feasible. Under the configuration information, the proposed structure can implement the multiplication in finite field GF(2n), the multiply/divide linear feedback shift register and other operations. Finally, this paper did a logic synthesis based on 55nm CMOS standard-cell library and the results show that the proposed structure gets a hardware resource saving of nearly 32%, the average power consumption saving of nearly 55% without the critical delay increasing significantly. Therefore, the “different operations similar structure” reconfigurable design is a new design method and the proposed feedback shift register structure can be an important processing unit for coarse-grained reconfigurable cryptologic array.

Specifics of an alias-free digitizer application for compressed digitizing and recording of wideband signals are considered. Signal sampling in this case is performed on the basis of picosecond resolution event timing, the digitizer actually is a subsystem of Event Timer A033-ET and specific events that are detected and then timed are the signal and reference sine-wave crossings. The used approach to development of this subsystem is described and some results of experimental studies are given.

The development of radar technology, Synthetic Aperture Radar (SAR) and Unmanned Aerial Vehicle (UAV) requires the communication facilities and infrastructures that have variety of platforms and high quality of image. In this paper, we obtain the basic configuration of triangle array antenna using corporate feeding-line for Circularly Polarized- Synthetic Aperture Radar (CP-SAR) sensor embedded on small UAV or drone airspace with compact, small, and simple configuration. The Method of Moments (MoM) is chosen in the numerical analysis for fast calculation of the unknown current on the patch antenna. The developing of triangle array antenna is consist of four patches of simple equilateral triangle patch with adding truncated corner of each patch and resonant frequency at f = 1.25 GHz. Proximity couple, perturbation segment, single feeding method are applied to generate the circular polarization wave from radiating patch. The corporate feeding-line design is implemented by combining some T-junctions to distribute the current from input port to radiating patch and to reach 2×2 patches. The performance results of this antenna, especially for gain and axial ratio (Ar) at the resonant frequency are 11.02 dBic and 2.47 dB, respectively. Furthermore, the two-beams appeared at boresight in elevation plane have similar values each other i.e. for average beamwidth of 10 dBic-gain and the 3 dB-Ar are about 20° and 70°, respectively.

The display image on the visual display unit (VDU) can be retrieved from the radiated and conducted emission at some distance with no trace. In this paper, the maximum eavesdropping distance for the unintentional radiation and conduction electromagnetic (EM) signals which contain information has been estimated in theory by considering some realistic parameters. Firstly, the maximum eavesdropping distance for the unintentional EM radiation is estimated based on the reception capacity of a log-periodic antenna which connects to a receiver, the experiment data, the attenuation in free-space and the additional attenuation in the propagation path. And then, based on a multi-conductor transmission model and some experiment results, the maximum eavesdropping distance for the conducted emission is theoretically derived. The estimating results demonstrated that the ITE equipment may also exist threat of the information leakage even if it has met the current EMC requirements.

The challenge of maintaining confidentiality of stored and processed data in a remote database or cloud is quite urgent. Using homomorphic encryption may solve the problem, because it allows to compute some functions over encrypted data without preliminary deciphering of data. Fully homomorphic encryption schemes have a number of limitations such as accumulation of noise and increase of ciphertext extension during performing operations, the range of operations is limited. Nowadays a lot of homomorphic encryption schemes and their modifications have been investigated, so more than 25 reports on homomorphic encryption schemes have already been published on Cryptology ePrint Archive for 2016. We propose an overview of current Fully Homomorphic Encryption Schemes and analyze specific operations for databases which homomorphic cryptosystems allow to perform. We also investigate the possibility of sorting over encrypted data and present our approach to compare data encrypted by Multi-bit FHE scheme.

Cryptography is the fascinating science that deals with constructing and destructing the secret codes. The evolving digitization in this modern era possesses cryptography as one of its backbones to perform the transactions with confidentiality and security wherever the authentication is required. With the modern technology that has evolved, the use of codes has exploded, enriching cryptology and empowering citizens. One of the most important things that encryption provides anyone using any kind of computing device is `privacy'. There is no way to have true privacy with strong security, the method with which we are dealing with is to make the cipher text more robust to be by-passed. In current work, the well known and renowned Caesar cipher and Rail fence cipher techniques are combined with a cross language cipher technique and the detailed comparative analysis amongst them is carried out. The simulations have been carried out on Eclipse Juno version IDE for executions and Java, an open source language has been used to implement these said techniques.

Matrix multiplication computation (MMC) is a common scientific and engineering computational task. But such computation involves enormous computing resources for large matrices, which is burdensome for the resource-limited clients. Cloud computing enables computational resource-limited clients to economically outsource such problems to the cloud server. However, outsourcing matrix multiplication to the cloud brings great security concerns and challenges since the matrices and their products often usually contains sensitive information. In a previous work, Lei et al. [1] proposed an algorithm for secure outsourcing MMC by using permutation matrix and the authors argued that it can achieve data privacy. In this paper, we first review the design of Lei's scheme and find a security vulnerability in their algorithm that it reveals the number of zero element in the input matrix to cloud server. Then we present a new verifiable, efficient, and privacy preserving algorithm for outsourcing MMC, which can protect the number privacy of zero elements in original matrices. Our algorithm builds on a series of carefully-designed pseudorandom matrices and well-designed privacy-preserving matrix transformation. Security analysis shows that our algorithm is practically-secure, and offers a higher level of privacy protection than the state-of-the-art algorithm.

The COPA authenticated encryption mode was proved to have a birthday-bound security on integrity, and its instantiation AES-COPA (v1/2) was claimed or conjectured to have a full security on tag guessing. The Marble (v1.0/1.1/1.2) authenticated encryption algorithm was claimed to have a full security on authenticity. Both AES-COPA (v1) and Marble (v1.0) were submitted to the Competition for Authenticated Encryption: Security, Applicability, and Robustness (CAESAR) in 2014, and Marble was revised twice (v1.1/1.2) in the first round of CAESAR, and AES-COPA (v1) was tweaked (v2) for the second round of CAESAR. In this paper, we cryptanalyse the basic cases of COPA, AES-COPA and Marble, that process messages of a multiple of the block size long; we present collision-based almost universal forgery attacks on the basic cases of COPA, AES-COPA (v1/2) and Marble (v1.0/1.1/1.2), and show that the basic cases of COPA and AES-COPA have roughly at most a birthday-bound security on tag guessing and the basic case of Marble has roughly at most a birthday-bound security on authenticity. The attacks on COPA and AES-COPA do not violate their birthday-bound security proof on integrity, but the attack on AES-COPA violates its full security claim or conjecture on tag guessing. Therefore, the full security claim or conjecture on tag guessing of AES-COPA and the full security claim on authenticity of Marble are incorrectly far overestimated in the sense of a general understanding of full security of these security notions. Designers should pay attention to these attacks when designing authenticated encryption algorithms with similar structures in the future, and should be careful when claiming the security of an advanced form of a security notion without making a corresponding proof after proving the security of the security notion only under its most fundamental form.

Software Defined Networking (SDN), and its popular implementation OpenFlow, represent the foundation for the design and implementation of modern networks. The essential part of an SDN-based network are flow rules that enable network elements to steer and control the traffic and deploy policy enforcement points with a fine granularity at any entry-point in a network. Such applications, implemented with the usage of OpenFlow rules, are already integral components of widely used SDN controllers such as Floodlight or OpenDayLight. The implementation details of network policies are reflected in the composition of flow rules and leakage of such information provides adversaries with a significant attack advantage such as bypassing Access Control Lists (ACL), reconstructing the resource distribution of Load Balancers or revealing of Moving Target Defense techniques. In this paper we introduce a new attack vector on SDN by showing how the detailed composition of flow rules can be reconstructed by network users without any prior knowledge of the SDN controller or its architecture. To our best knowledge, in SDN, such reconnaissance techniques have not been considered so far. We introduce SDNMap, an open-source scanner that is able to accurately reconstruct the detailed composition of flow rules by performing active probing and listening to the network traffic. We demonstrate in a number of real-world SDN applications that this ability provides adversaries with a significant attack advantage and discuss ways to prevent the introduced reconnaissance techniques. Our SDNMap scanner is able to reconstruct flow rules between network endpoints with an accuracy of over 96%.

The article proposes an enhanced behavior model using graphs of state transitions. The properties and advantages of the proposed model are discussed, UML-based Cooperative Interaction of Automata Objects (CIAO) language is described, attribute approach on its parsing mechanism is introduced. The proposed model for describing behavior is aimed at achieving higher reliability and productivity indicators when designing the secure architecture and implementing reactive and distributed systems in comparison with traditional methods. A side-by-side goal is to create a convenient publication language for describing parallel algorithms and distributed reactive systems. The offered model has advantages under certain conditions in comparison with other models of behavior description in the field of the description of asynchronous distributed reacting systems.

Network Functions Virtualization (NFV) has provided a new way to design and deploy network security services, but it may fail to build a practically useful ecosystem that seamlessly integrates network security services if there is no standard interface between them. We propose a generic architecture for security management service based on Network Security Functions (NSF) using NFV. The proposed architecture allows users to define their security requirements in a user-friendly manner by providing the users with high-level security interfaces that do not require specific information about network resources and protocols. We design basic components (e.g., Security policy manager, NSF capability manager, Application logic, Policy updater and Event collector) and interfaces for the proposed architecture. We introduce three use cases: (1) blacklists of dangerous domains, (2) time-dependent access control policies and (3) detection of suspicious calls for VoIP-VoLTE services. We also explain how to implement our proposed architecture with an illustrative example. Furthermore, we discuss several technical challenges to deploy the proposed architecture in a real network environment.

In recent years, cyber security oriented research is paying much close attention on Vehicular Adhoc NETworks (VANETs). However, existing vehicular networks do not meet current security requirements. Typically for dynamic networks, maximal decentralization and rapidly changing topology of moving hosts form a number of security issues associated with ensuring access control of hosts, security policy enforcement, and resistance of the routing methods. To solve these problems generally, the paper reviews SDN (software defined networks) based network security architectures of VANET. The following tasks are solved in our work: composing of network security architectures for SDN-VANET (architecture with the central control and shared security servers, decentralized (zoned) architecture, hierarchical architecture); implementation of these architectures in virtual modeling environment; and experimental study of effectiveness of the suggested architectures. With large-scale vehicular networks, architectures with multiple SDN controllers are most effective. In small networks, the architecture with the central control also significantly outperforms the traditional VANET architecture. For the suggested architectures, three control modes are discussed in the paper: central, distributed and hybrid modes. Unlike common architectures, all of the proposed security architectures allow us to establish a security policy in m2m-networks and increase resistance capabilities of self-organizing networks.

With the development of the information and communications technology, new network architecture and applications keep emerging promoted by cloud computing, big data, virtualization technology, etc. As a novel network architecture, Software Defined Network (SDN) realizes separation of the control plane and the data plane, thus controlling hardware by a software platform which is known as the central controller. Through that method SDN realizes the flexible deployment of network resources. In the process of the development and application of SDN, its open architecture has exposed more and more security problem, which triggers a critical focus on how to build a secure SDN. Based on the hierarchical SDN architecture and characteristics, this paper analyzes the security threats that SDN may face in the application layer, the control layer, the resource layer and the interface layer. In order to solve those security threats, the paper presents an SDN security architecture which can provide corresponding defense ability. The paper also puts forward an enhanced access control strategy adopting an attribute-based encryption method in the SDN security architecture.