Biblio

Data streaming over a wireless network such as Wireless Sensor Networks, where wireless terminals (like PDAs, mobile phones, palmtops) access in data conferencing system, new challenges will be brought about. goal for this paper is to propose a high-speed lightweight encryption (HSLE) for low computational capability controller of WSN, HSLE scheme which reduces latency overhead by modifying existing approaches in order to encrypting data using a probabilistic encryption of data blocks. Proposed work is also useful when we communicate our confidential data on WSN or IoT it should be secure, we just have to save an encrypted data on cloud servers. proposed work is a new key-based algorithm and uses HSLE encryption instead for high end AES. Proposed methods cause significant speed enhancement for data encryption with similar security, in addition, it is best suited in order to communication between hand-held devices such as mobile phones, palmtops etc. algorithm may be used between sites where processing capacity and battery power are limited and efficient encryption is main necessity. This work is implemented on MATLAB and a wireless sensor network of maximum 100 nodes developed for testing the proposed network node encryption system, the time delay observed for the communication in 100 nodes WSN is less in compare with the other available works.

Driven by the progress of data and compute-intensive methods in various scientific domains, there is an in-creasing demand from researchers working with highly sensitive data to have access to the necessary computational resources to be able to adapt those methods in their respective fields. To satisfy the computing needs of those researchers cost-effectively, it is an open quest to integrate reliable security measures on existing High Performance Computing (HPC) clusters. The fundamental problem with securely working with sensitive data is, that HPC systems are shared systems that are typically trimmed for the highest performance - not for high security. For instance, there are commonly no additional virtualization techniques employed, thus, users typically have access to the host operating system. Since new vulnerabilities are being continuously discovered, solely relying on the traditional Unix permissions is not secure enough. In this paper, we discuss a generic and secure workflow that can be implemented on typical HPC systems allowing users to transfer, store and analyze sensitive data. In our experiments, we see an advantage in the asynchronous execution of IO requests, while reaching 80 % of the ideal performance.

Internet architecture has transformed into a more complex form than it was about a decade back. Today the internet comprises multimedia information where services and web applications have started to shift their focus on content. In our perspective of communication systems, content-centric networking (CCN) proposes a new methodology. The use of cache memory at the network level is an important feature of this new architecture. This cache is intended to store transit details for a set period, and it is hoped that this capability will aid in network quality, especially in a rapidly increasing video streaming situation. Information-centric networking (ICN) is the one architecture that is seen as a possible alternative for shifting the Internet from a host-centric to a content-centric point-of-view. It focuses on data rather than content. CCN is more reliable when it comes to data delivery as it does not need to depend on location for data. CCN architecture is scalable, secure and provides mobility support. In this paper, we implement a ccnchat, a chat testing application, which is created with the help of libraries provided by Palo Alto Research Center (PARC) on local area network (LAN) between two users and demonstrate the working of this local chat application over CCN network that works alongside existing IP infrastructure.

Healthcare has become one of the most important aspects of people’s lives, resulting in a surge in medical big data. Healthcare providers are increasingly using Internet of Things (IoT)-based wearable technologies to speed up diagnosis and treatment. In recent years, Through the Internet, billions of sensors, gadgets, and vehicles have been connected. One such example is for the treatment and care of patients, technology—remote patient monitoring—is already commonplace. However, these technologies also offer serious privacy and data security problems. Data transactions are transferred and logged. These medical data security and privacy issues might ensue from a pause in therapy, putting the patient’s life in jeopardy. We planned a framework to manage and analyse healthcare large data in a safe manner based on blockchain. Our model’s enhanced privacy and security characteristics are based on data sanitization and restoration techniques. The framework shown here make data and transactions more secure.

Big Data (BD) is the combination of several technologies which address the gathering, analyzing and storing of massive heterogeneous data. The tremendous spurt of the Internet of Things (IoT) and different technologies are the fundamental incentive behind this enduring development. Moreover, the analysis of this data requires high-performance servers for advanced and parallel data analytics. Thus, data owners with their limited capabilities may outsource their data to a powerful but untrusted environment, i.e., the Cloud. Furthermore, data analytic techniques performed on external cloud may arise various security intimidations regarding the confidentiality and the integrity of the aforementioned; transferred, analyzed, and stored data. To countermeasure these security issues and challenges, several techniques have been addressed. This survey paper aims to summarize and emphasize the security threats within Big Data framework, in addition, it is worth mentioning research work related to Big Data Analytics (BDA).

Technology is transforming rapidly. Security during data transmission is an increasingly critical and essential factor for the integrity and confidentiality of data in the financial domain, such as e-commerce transactions and bank transactions, etc. We cannot overestimate the importance of encryption/decryption of information in the digital economy. The need to strengthen and secure the digital economy is urgent. Cryptography maintains the security and integrity of data kept on computers and data communicated over the internet using encryption/decryption. A new concept in cryptography named DNA cryptography has attracted the interest of information security professionals. The DNA cryptography method hides data using a DNA sequence, with DNA encryption converting binary data into the DNA sequence. Deoxy Ribonucleic Acid (DNA) is a long polymer strand having nitrogen bases adenine (A), thymine (T), cytosine (C), and guanine (G), which play an important role in plain text encoding and decoding. DNA has high storage capacity, fast processing, and high computation capacity, and is more secure than other cryptography algorithms. DNA cryptography supports both symmetric and asymmetric cryptography. DNA cryptography can encrypt numeric values, English language and unicast. The main aim of this paper is to explain different aspects of DNA cryptography and how it works. We also compare different DNA algorithms/methods proposed in a previous paper, and implement DNA cryptography using one-time pad (OTP) and amino acid sequence using java language. OTP is used for symmetric key generation and the DNA sequence is converted to an amino acid sequence to create confusion.

In this work, we propose a novel framework to identify and mitigate a recently disclosed covert channel scheme exploiting unprotected broadcast messages in cellular MAC layer protocols. Examples of covert channel are used in data exfiltration, remote command-and-control (CnC) and espionage. Responsibly disclosed to GSMA (CVD-2021-0045), the SPAR-ROW covert channel scheme exploits the downlink power of LTE/5G base-stations that broadcast contention resolution identity (CRI) from any anonymous device according to the 3GPP standards. Thus, the SPARROW devices can covertly relay short messages across long-distance which can be potentially harmful to critical infrastructure. The SPARROW schemes can also complement the solutions for long-range M2M applications. This work investigates the security vs. performance trade-off in CRI-based contention resolution mechanisms. Then it offers a rig-orously designed method to randomly obfuscate CRI broadcast in future 5G/6G standards. Compared to CRI length reduction, the proposed method achieves considerable protection against SPARROW exploitation with less impact on the random-access performance as shown in the numerical results.

Nowadays, lives are very much easier with the help of IoT. Due to lack of protection and a greater number of connections, the management of IoT becomes more difficult To manage the network flow, a Software Defined Networking (SDN) has been introduced. The SDN has a great capability in automatic and dynamic distribution. For harmful attacks on the controller a centralized SDN architecture unlocks the scope. Therefore, to reduce these attacks in real-time, a securing SDN enabled IoT scenario infrastructure of Fog networks is preferred. The virtual switches have network enforcement authorized decisions and these are executed through the SDN network. Apart from this, SDN switches are generally powerful machines and simultaneously these are used as fog nodes. Therefore, SDN looks like a good selection for Fog networks of IoT. Moreover, dynamically distributing the necessary crypto keys are allowed by the centralized and software channel protection management solution, in order to establish the Datagram Transport Layer Security (DTIS) tunnels between the IoT devices, when demanded by the cyber security framework. Through the extensive deployment of this combination, the usage of CPU is observed to be 30% between devices and the latencies are in milliseconds range, and thus it presents the system feasibility with less delay. Therefore, by comparing with the traditional SDN, it is observed that the energy consumption is reduced by more than 90%.

Thefts problem in household needs to be anticipated with home security system. One of simple methods is using automatic solenoid door lock system, so that it is difficult to be duplicated and will reduce the chance of theft action when the house is empty. Therefore, a home security system prototype that can be accessed by utilizing biometric fingerprint, Radio Frequency Identification (RFID), and keypad sensors was designed and tested. Arduino Uno works to turn on the door lock solenoid, so door access will be given when authentication is successful. Experimental results show that fingerprint sensor works well by being able to read fingerprints perfectly and the average time required to scan a fingerprint was 3.7 seconds. Meanwhile, Radio Frequency Identification (RFID) sensor detects Electronic-Kartu Tanda Penduduk (E-KTP) and the average time required for Radio Frequency Identification (RFID) to scan the card is about 2.4 seconds. Keypad functions to store password to unlock the door which produces the average time of 3.7 seconds after 10 trials. Average time to open with multi-sensor is 9.8 seconds. However, its drawback is no notification or SMS which directly be accessed by a cellphone or website with Wi-Fi or Telegram applications allow homeowners to monitor their doors from afar as to minimize the number of house thefts.

The emergence of CPSs leads to modernization of critical infrastructures and improving flexibility and efficiency from one point of view. However, from another point of view, this modernization has subjected them to cyber threats. This paper provides a modeling approach for evaluating the security of CPSs. The main idea behind the presented model is to study the attacker and the system behaviors in the penetration and attack phases with exploiting some defensive countermeasures such as redundant components and attack detection strategies. By using the proposed approach, we can investigate how redundancy factor of sensors, controllers and actuators and intrusion detection systems can improve the system security and delay the system security failure.

The era of technology has seen many rising inventions and with that rise, comes the need to secure our systems. In this paper we have discussed how the old generation of people are falling behind at being updated in tandem with technology, and losing track of the knowledge required to process the same. In addition this factor leads to leakage of critical personal information. This paper throws light upon the steps taken in order to exploit the pre-existing operating system, Windows 7, Ultimate, using a ubiquitous framework used by everyone, i.e. Metasploit. It involves installation of a backdoor on the victim machine, from a remote setup, mostly Kali Linux operating machine. This backdoor allows the attackers to create executable files and deploy them in the windows system to gain access on the machine, remotely. After gaining access, manipulation of sensitive data becomes easy. Access to the admin rights of any system is a red alert because it means that some outsider has intense access to personal information of a human being and since data about someone explains a lot of things about them. It basically is exposing and human hate that. It depraves one of their personal identity. Therefore security is not something that should be taken lightly. It is supposed to be dealt with utmost care.

Cloud computing is a model of service provisioning in heterogeneous distributed systems that encourages many researchers to explore its benefits and drawbacks in executing workflow applications. Recently, high-quality security protection has been a new challenge in workflow allocation. Different tasks may and may not have varied security demands, security overhead may vary for different virtual machines (VMs) at which the task is assigned. This paper proposes a Security Oriented Deadline-Aware workflow allocation (SODA) strategy in an IaaS cloud environment to minimize the risk probability of the workflow tasks while considering the deadline met in a deterministic environment. SODA picks out the task based on the highest security upward rank and assigns the selected task to the trustworthy VMs. SODA tries to simultaneously satisfy each task’s security demand and deadline at the maximum possible level. The simulation studies show that SODA outperforms the HEFT strategy on account of the risk probability of the cloud system on scientific workflow, namely CyberShake.

All-or-nothing transforms (AONT) were proposed by Rivest as a message preprocessing technique for encrypting data to protect against brute-force attacks, and have many applications in cryptography and information security. Later the unconditionally secure AONT and their combinatorial characterization were introduced by Stinson. Informally, a combinatorial AONT is an array with the unbiased requirements and its security properties in general depend on the prior probability distribution on the inputs s-tuples. Recently, it was shown by Esfahani and Stinson that a combinatorial AONT has perfect security provided that all the inputs s-tuples are equiprobable, and has weak security provided that all the inputs s-tuples are with non-zero probability. This paper aims to explore on the gap between perfect security and weak security for combinatorial (t, s, v)-AONTs. Concretely, we consider the typical scenario that all the s inputs take values independently (but not necessarily identically) and quantify the amount of information H(\textbackslashmathcalX\textbackslashmid \textbackslashmathcalY) about any t inputs \textbackslashmathcalX that is not revealed by any s−t outputs \textbackslashmathcalY. In particular, we establish the general lower and upper bounds on H(\textbackslashmathcalX\textbackslashmid \textbackslashmathcalY) for combinatorial AONTs using information-theoretic techniques, and also show that the derived bounds can be attained in certain cases.

The Personnel Management Information System is managed by the Personnel and Human Resources Development Agency on local government office to provide personnel services. The existence of a system and information technology can help ongoing business processes but can have an impact or risk if the proper mitigation is not carried out. It is known that the problems are damage to databases, servers, and computer equipment due to bad weather, network connections being lost due to power outages, data loss due to not having backup data, and human error. This resulted in PMIS being inaccessible for some time, thus hampering ongoing business processes and causing financial losses. This study aims to identify risks, conduct a risk assessment using the failure mode and effects analysis (FMEA) method, and provide mitigation recommendations based on the ISO/IEC 27002:2013 standard. The analysis results obtained 50 failure modes categorized into five asset categories, and six failure modes have a high level. Then provide mitigation recommendations based on the ISO/IEC 27002:2013 Standard, which has been adapted to the needs of Human Resources Development Agency. Thus, the results of this study are expected to assist and serve as material for local office government's consideration in making improvements and security controls to avoid emerging threats to information assets.

In case of deploying additional network security equipment in a new location, network service providers face difficulties such as precise management of large number of network security equipment and expensive network operation costs. Accordingly, there is a need for a method for security-aware network service provisioning using the existing network security equipment. In order to solve this problem, there is an existing reinforcement learning-based routing decision method fixed for each node. This method performs repeatedly until a routing decision satisfying end-to-end security constraints is achieved. This generates a disadvantage of longer network service provisioning time. In this paper, we propose security constraints reinforcement learning based routing (SCRR) algorithm that generates routing decisions, which satisfies end-to-end security constraints by giving conditional reward values according to the agent state-action pairs when performing reinforcement learning.

In this work, the security sliding mode control issue is studied for interval type-2 (IT2) fuzzy systems under the unreliable network. The deception attacks and the denial-of-service (DoS) attacks may occur in the sensor-controller channels to affect the transmission of the system state, and these attacks are described via two independent Bernoulli stochastic variables. By adopting the compensation strategy and utilizing the available state, the new membership functions are constructed to design the fuzzy controller with the different fuzzy rules from the fuzzy model. Then, under the mismatched membership function, the designed security controller can render the closed-loop IT2 fuzzy system to be stochastically stable and the sliding surface to be reachable. Finally, the simulation results verify the security control scheme.

The burglary of a safe in the city of Jombang, East Java, lost valuables belonging to the Cemerlang Multipurpose Trading Cooperative. Therefore, a security system tool was created in the safe that serves as a place to store valuables and important assets. Change the security system using the security system with a private unique method with modulo arithmetic pattern. The security system of the safe is designed in layers which are attached with the RFID tag by registering and then verifying it on the card. Entering the password on the card cannot be read or is not performed, then the system will refuse to open it. arduino mega type 256 components, RFID tag is attached to the RFID reader, only one validated passive tag can open access to the security system, namely number B9 20 E3 0F. Meanwhile, of the ten passwords entered, only three match the modulo arithmetic format and can open the security system, namely password numbers 22540, 51324 and 91032. The circuit system on the transistor in the solenoid driver circuit works after the safety system opens. The servo motor can rotate according to the input of the open 900 servo angle rotation program.

Software quality assurance (SQA) is a means and practice of monitoring the software engineering processes and methods used in a project to ensure proper quality of the software. It encompasses the entire software development life-cycle, including requirements engineering, software design, coding, source code reviews, software configuration management, testing , release management, software deployment and software integration. It is organized into goals, commitments, abilities, activities, measurements, verification and validation. In this talk, we will mainly focus on the testing activity part of the software development life-cycle. Its main objective is checking that software is satisfying a set of quality properties that are identified by the "ISO/IEC 25010:2011 System and Software Quality Model" standard [1] .

Supervisory Control and Data Acquisition (SCADA) systems are used to control and monitor components within the energy grid, playing a significant role in the stability of the system. As a part of critical infrastructures, components in these systems have to fulfill a variety of different requirements regarding their dependability and must also undergo strict audit procedures in order to comply with all relevant standards. This results in a slow adoption of new functionalities. Due to the emerged threat of cyberattacks against critical infrastructures, extensive security measures are needed within these systems to protect them from adversaries and ensure a stable operation. In this work, a solution is proposed to integrate extensive security measures into current systems. By deploying additional security-gateways into the communication path between two nodes, security features can be integrated transparently for the existing components. The developed security-gateway is compliant to all regulatory requirements and features an internal architecture based on the separation-of-concerns principle to increase its security and longevity. The viability of the proposed solution has been verified in different scenarios, consisting of realistic field tests, security penetration tests and various performance evaluations.

Recently, hardware Trojan has become a serious security concern in the integrated circuit (IC) industry. Due to the globalization of semiconductor design and fabrication processes, ICs are highly vulnerable to hardware Trojan insertion by malicious third-party vendors. Therefore, the development of effective hardware Trojan detection techniques is necessary. Testability measures have been proven to be efficient features for Trojan nets classification. However, most of the existing machine-learning-based techniques use supervised learning methods, which involve time-consuming training processes, need to deal with the class imbalance problem, and are not pragmatic in real-world situations. Furthermore, no works have explored the use of anomaly detection for hardware Trojan detection tasks. This paper proposes a semi-supervised hardware Trojan detection method at the gate level using anomaly detection. We ameliorate the existing computation of the Sandia Controllability/Observability Analysis Program (SCOAP) values by considering all types of D flip-flops and adopt semi-supervised anomaly detection techniques to detect Trojan nets. Finally, a novel topology-based location analysis is utilized to improve the detection performance. Testing on 17 Trust-Hub Trojan benchmarks, the proposed method achieves an overall 99.47% true positive rate (TPR), 99.99% true negative rate (TNR), and 99.99% accuracy.

Deep learning-based semantic communications (DLSC) significantly improve communication efficiency by only transmitting the meaning of the data rather than a raw message. Such a novel paradigm can brace the high-demand applications with massive data transmission and connectivities, such as automatic driving and internet-of-things. However, DLSC are also highly vulnerable to various attacks, such as eavesdropping, surveillance, and spoofing, due to the openness of wireless channels and the fragility of neural models. To tackle this problem, we present SemKey, a novel physical layer key generation (PKG) scheme that aims to secure the DLSC by exploring the underlying randomness of deep learning-based semantic communication systems. To boost the generation rate of the secret key, we introduce a reconfigurable intelligent surface (RIS) and tune its elements with the randomness of semantic drifts between a transmitter and a receiver. Precisely, we first extract the random features of the semantic communication system to form the randomly varying switch sequence of the RIS-assisted channel and then employ the parallel factor-based channel detection method to perform the channel detection under RIS assistance. Experimental results show that our proposed SemKey significantly improves the secret key generation rate, potentially paving the way for physical layer security for DLSC.

Personal data privacy is a great concern by governments across the world as citizens generate huge amount of data continuously and industries using this for betterment of user centric services. There must be a reasonable balance between data privacy and utility of data. Differential privacy is a promise by data collector to the customer’s personal privacy. Centralised Differential Privacy (CDP) is performing output perturbation of user’s data by applying required privacy budget. This promises the inclusion or exclusion of individual’s data in data set not going to create significant change for a statistical query output and it offers -Differential privacy guarantee. CDP is holding a strong belief on trusted data collector and applying global sensitivity of the data. Local Differential Privacy (LDP) helps user to locally perturb his data and there by guaranteeing privacy even with untrusted data collector. Many differential privacy algorithms handles parameters like privacy budget, sensitivity and data utility in different ways and mostly trying to keep trade-off between privacy and utility of data. This paper evaluates differential privacy algorithms in regard to the privacy support it offers according to the sensitivity of the data. Generalized application of privacy budget is found ineffective in comparison to the sensitivity based usage of privacy budget.

Cyber-Physical Systems (CPS) have a physical part that can interact with sensors and actuators. The data that is read from sensors and the one generated to drive actuators is crucial for the correct operation of this class of devices. Most implementations trust the data being read from sensors and the outputted data to actuators. Real-time validation of the input and output of data for any system is crucial for the safety of its operation. This paper proposes an architecture for handling this issue through smart data guards detached from sensors and controllers and acting solely on the data. This mitigates potential issues of malfunctioning sensors and intentional sensor and controller attacks. The data guards understand the expected data, can detect anomalies and can correct them in real-time. This approach adds more guarantees for fault-tolerant behavior in the presence of attacks and sensor failures.

This paper investigates the problem of synthesizing sensor deception attackers against privacy in the context of supervisory control of discrete-event systems (DES). We consider a plant controlled by a supervisor, which is subject to sensor deception attacks. Specifically, we consider an active attacker that can tamper with the observations received by the supervisor. The privacy requirement of the supervisory control system is to maintain initial-state opacity, i.e., it does not want to reveal the fact that it was initiated from a secret state during its operation. On the other hand, the attacker aims to deceive the supervisor, by tampering with its observations, such that initial-state opacity is violated due to incorrect control actions. We investigate from the attacker’s point of view by presenting an effective approach for synthesizing sensor attack strategies threatening the privacy of the system. To this end, we propose the All Attack Structure (AAS) that records state estimates for both the supervisor and the attacker. This structure serves as a basis for synthesizing a sensor attack strategy. We also discuss how to simplify the synthesis complexity by leveraging the structural properties. A running academic example is provided to illustrate the synthesis procedure.

Sentiment Analysis (SA) is an approach for detecting subjective information such as thoughts, outlooks, reactions, and emotional state. The majority of previous SA work treats it as a text-classification problem that requires labelled input to train the model. However, obtaining a tagged dataset is difficult. We will have to do it by hand the majority of the time. Another concern is that the absence of sufficient cross-domain portability creates challenging situation to reuse same-labelled data across applications. As a result, we will have to manually classify data for each domain. This research work applies sentiment analysis to evaluate the entire vaccine twitter dataset. The work involves the lexicon analysis using NLP libraries like neattext, textblob and multi class classification using BERT. This word evaluates and compares the results of the machine learning algorithms.