Biblio

There are a lot of emerging security equipment required to be tested on detection rate (DR) and false alarm rate (FAR) for prohibited items. This article imports Bayesian approach to accept or reject DR and FAR. The detailed quantitative predictions can be made through the posterior distribution obtained by Markov chain Monte Carlo method. Based on this, HDI + ROPE decision rule is established. For the tests that need to make early decision, HDI + ROPE stopping rule is presented with biased estimate value, and criterial precision rule is presented with unbiased estimate value. Choosing the stopping rule according to the test purpose can achieve the balance of efficiency and accuracy.

Attackers can leverage several techniques to compromise computer networks, ranging from sophisticated malware to DDoS (Distributed Denial of Service) attacks that target the application layer. Application layer DDoS attacks, such as Slow Read, are implemented with just enough traffic to tie up CPU or memory resources causing web and application servers to go offline. Such attacks can mimic legitimate network requests making them difficult to detect. They also utilize less volume than traditional DDoS attacks. These low volume attack methods can often go undetected by network security solutions until it is too late. In this paper, we explore the use of machine learners for detecting Slow Read DDoS attacks on web servers at the application layer. Our approach uses a generated dataset based upon Netflow data collected at the application layer on a live network environment. Our Netflow data uses the IP Flow Information Export (IPFIX) standard providing significant flexibility and features. These Netflow features can process and handle a growing amount of traffic and have worked well in our previous DDoS work detecting evasion techniques. Our generated dataset consists of real-world network data collected from a production network. We use eight different classifiers to build Slow Read attack detection models. Our wide selection of learners provides us with a more comprehensive analysis of Slow Read detection models. Experimental results show that the machine learners were quite successful in identifying the Slow Read attacks with a high detection and low false alarm rate. The experiment demonstrates that our chosen Netflow features are discriminative enough to detect such attacks accurately.

In this paper, we explore the use of machine learning technique for wormhole attack detection in ad hoc network. This work has categorized into three major tasks. One of our tasks is a simulation of wormhole attack in an ad hoc network environment with multiple wormhole tunnels. A next task is the characterization of packet attributes that lead to feature selection. Consequently, we perform data generation and data collection operation that provide large volume dataset. The final task is applied to machine learning technique for wormhole attack detection. Prior to this, a wormhole attack has detected using traditional approaches. In those, a Multirate-DelPHI is shown best results as detection rate is 90%, and the false alarm rate is 20%. We conduct experiments and illustrate that our method performs better resulting in all statistical parameters such as detection rate is 93.12% and false alarm rate is 5.3%. Furthermore, we have also shown results on various statistical parameters such as Precision, F-measure, MCC, and Accuracy.

False alarm and miss are two general kinds of alarm errors and they can decrease operator's trust in the alarm system. Specifically, there are two different forms of trust in such systems, represented by two kinds of responses to alarms in this research. One is compliance and the other is reliance. Besides false alarm and miss, the two responses are differentially affected by properties of the alarm system, situational factors or operator factors. However, most of the existing studies have qualitatively analyzed the relationship between a single variable and the two responses. In this research, all available experimental studies are identified through database searches using keyword "compliance and reliance" without restriction on year of publication to December 2017. Six relevant studies and fifty-two sets of key data are obtained as the data base of this research. Furthermore, neural network is adopted as a tool to establish the quantitative relationship between multiple factors and the two forms of trust, respectively. The result will be of great significance to further study the influence of human decision making on the overall fault detection rate and the false alarm rate of the human machine system.

The dynamically changing landscape of DDoS threats increases the demand for advanced security solutions. The rise of massive IoT botnets enables attackers to mount high-intensity short-duration ”volatile ephemeral” attack waves in quick succession. Therefore the standard human-in-the-loop security center paradigm is becoming obsolete. To battle the new breed of volatile DDoS threats, the intrusion detection system (IDS) needs to improve markedly, at least in reaction times and in automated response (mitigation). Designing such an IDS is a daunting task as network operators are traditionally reluctant to act - at any speed - on potentially false alarms. The primary challenge of a low reaction time detection system is maintaining a consistently low false alarm rate. This paper aims to show how a practical FPGA-based DDoS detection and mitigation system can successfully address this. Besides verifying the model and algorithms with real traffic ”in the wild”, we validate the low false alarm ratio. Accordingly, we describe a methodology for determining the false alarm ratio for each involved threat type, then we categorize the causes of false detection, and provide our measurement results. As shown here, our methods can effectively mitigate the volatile ephemeral DDoS attacks, and accordingly are usable both in human out-of-loop and on-the-loop next-generation security solutions.

Distributed Denial of Service (DDoS) attack is a congestion-based attack that makes both the network and host-based resources unavailable for legitimate users, sending flooding attack packets to the victim's resources. The non-existence of predefined rules to correctly identify the genuine network flow made the task of DDoS attack detection very difficult. In this paper, a combination of unsupervised data mining techniques as intrusion detection system are introduced. The entropy concept in term of windowing the incoming packets is applied with data mining technique using Clustering Using Representative (CURE) as cluster analysis to detect the DDoS attack in network flow. The data is mainly collected from DARPA2000, CAIDA2007 and CAIDA2008 datasets. The proposed approach has been evaluated and compared with several existing approaches in terms of accuracy, false alarm rate, detection rate, F. measure and Phi coefficient. Results indicates the superiority of the proposed approach with four out five detected phases, more than 99% accuracy rate 96.29% detection rate, around 0% false alarm rate 97.98% F-measure, and 97.98% Phi coefficient.

Intrusion detection has been an active field of research for more than 35 years. Numerous systems had been built based on the two fundamental detection principles, knowledge-based and behavior-based detection. Anyway, having a look at day-to-day news about data breaches and successful attacks, detection effectiveness is still limited. Even more, heavy-weight intrusion detection systems cannot be installed in every endangered environment. For example, Industrial Control Systems are typically utilized for decades, charging off huge investments of companies. Thus, some of these systems have been in operation for years, but were designed afore without security in mind. Even worse, as systems often have connections to other networks and even the Internet nowadays, an adequate protection is mandatory, but integrating intrusion detection can be extremely difficult - or even impossible to date. We propose a new lightweight current-based IDS which is using a difficult to manipulate measurement base and verifiable ground truth. Focus of our system is providing intrusion detection for ICS and SCADA on a low-priced base, easy to integrate. Dr. WATTson, a prototype implemented based on our concept provides high detection and low false alarm rates.

With the developing of Internet, network intrusion has become more and more common. Quickly identifying and preventing network attacks is getting increasingly more important and difficult. Machine learning techniques have already proven to be robust methods in detecting malicious activities and network threats. Ensemble-based and semi-supervised learning methods are some of the areas that receive most attention in machine learning today. However relatively little attention has been given in combining these methods. To overcome such limitations, this paper proposes a novel network anomaly detection method by using a combination of a tri-training approach with Adaboost algorithms. The bootstrap samples of tri-training are replaced by three different Adaboost algorithms to create the diversity. We run 30 iteration for every simulation to obtain the average results. Simulations indicate that our proposed semi-supervised Adaboost algorithm is reproducible and consistent over a different number of runs. It outperforms other state-of-the-art learning algorithms, even with a small part of labeled data in the training phase. Specifically, it has a very short execution time and a good balance between the detection rate as well as the false-alarm rate.

Free-text keystroke authentication has been demonstrated to be a promising behavioral biometric. But unlike physiological traits such as fingerprints, in free-text keystroke authentication, there is no natural way to identify what makes a sample. It remains an open problem as to how much keystroke data are necessary for achieving acceptable authentication performance. Using public datasets and two existing algorithms, we conduct two experiments to investigate the effect of the reference profile size and test sample size on False Alarm Rate (FAR) and Imposter Pass Rate (IPR). We find that (1) larger reference profiles will drive down both IPR and FAR values, provided that the test samples are large enough, and (2) larger test samples have no obvious effect on IPR, regardless of the reference profile size. We discuss the practical implication of our findings.