Biblio

The fingerprint sensor based on pMUTs was reported [1]. Spatial resolution of the image depends on the size of the acoustic source when a plane wave is used. If the size of the acoustic source is smaller, piezoelectric films with high dielectric constant are required. In this study, in order to obtain small acoustic source, we proposed Pb(Zrx Th-x)O3 (PZT) epitaxial transducers with high dielectric constant. PbTiO3 (PTO) epitaxial films were grown on conductive La-SrTiO3 (STO) substrate by RF magnetron sputtering. Longitudinal wave conversion loss of PTO transducers was measured by a network analyzer. The thermoplastic elastomer was used instead of real fingerprint. We confirmed that conversion loss of piezoelectric film/substrate structure was increased by contacting the elastomer due the change of reflection coefficient of the substrate bottom/elastomer interface. Minimum conversion loss images were obtained by mechanically scanning the soft probe on the transducer surface. We achieved the detection of the fingerprint phantom based on the elastomer in the GHz.

There is some uncertainty as to the applicability or accuracy of current theories for wave propagation in sediments. Numerical modelling of acoustic data has long been recognized to be a powerful method of understanding of complicated wave propagation and interaction. In this paper, we used the coupled two-dimensional PSM-BEM program to simulate the process of acoustic wave propagation in the seafloor with distributed multi-scale random media. The effects of fluid flow between the pores and the grains with multi-scale distribution were considered. The results show that the coupled PSM-BEM program can be directly applied to both high and low frequency seafloor acoustics. A given porous frame with the pore space saturated with fluid can greatly increase the magnitude of acoustic anisotropy. acoustic wave velocity dispersion and attenuation are significant over a frequency range which spans at least two orders of magnitude.

The subsystem of IoMT (Internet of Military of Things) called IoBT (Internet of Battle of Things) is the major resource of the military where the various stack holders of the battlefield and different categories of equipment are tightly integrated through the internet. The proposed architecture mentioned in this paper will be helpful to design IoBT effectively for warfare using irresistible technologies like information technology, embedded technology, and network technology. The role of Machine intelligence is essential in IoBT to create smart things and provide accurate solutions without human intervention. Non-Destructive Testing (NDT) is used in Industries to examine and analyze the invisible defects of equipment. Generally, the ultrasonic waves are used to examine and analyze the internal defects of materials. Hence the proposed architecture of IoBT is enhanced by ultrasonic based NDT to study the properties of the things of the battlefield without causing any damage.

In recent years, unmanned aerial vehicles (UAVs) have become increasingly accessible to the public due to their high availability with affordable prices while being equipped with better technology. However, this raises a great concern from both the cyber and physical security perspectives since UAVs can be utilized for malicious activities in order to exploit vulnerabilities by spying on private properties, critical areas or to carry dangerous objects such as explosives which makes them a great threat to the society. Drone identification is considered the first step in a multi-procedural process in securing physical infrastructure against this threat. In this paper, we present drone detection and identification methods using deep learning techniques such as Convolutional Neural Network (CNN), Recurrent Neural Network (RNN) and Convolutional Recurrent Neural Network (CRNN). These algorithms will be utilized to exploit the unique acoustic fingerprints of the flying drones in order to detect and identify them. We propose a comparison between the performance of different neural networks based on our dataset which features audio recorded samples of drone activities. The major contribution of our work is to validate the usage of these methodologies of drone detection and identification in real life scenarios and to provide a robust comparison of the performance between different deep neural network algorithms for this application. In addition, we are releasing the dataset of drone audio clips for the research community for further analysis.

Biometric recognition systems based on ultrasound images have been investigated for several decades, and nowadays ultrasonic fingerprint sensors are fully integrated in portable devices. Main advantage of the Ultrasound over other technologies are the possibility to collect 3D images, allowing to gain information on under-skin features, which improve recognition accuracy and resistance to spoofing. Also, ultrasound images are not sensible to several skin contaminations, humidity and not uniform ambient illumination. An ultrasound system, able to acquire 3D images of the human palm has been recently proposed. In this work, a recognition procedure based on 2D palmprint images collected with this system is proposed and evaluated through verification experiments carried out on a home made database composed of 141 samples collected from 24 users. Perspective of the proposed method by upgrading the recognition procedure to provide a 3D template able to accounts for palm lines' depth are finally highlighted and discussed.

As Electric Power is one of the major concerns, so the concept of the automatic lighting and security system saves the electrical energy. By using the automatic lightning, the consumption of electrical power can be minimized to a greater extent and for that sensors and microcontrollers can be designed in such a manner such that lights get ON/OFF based on motion in a room. The various sensors used for sensing the motion in an area are PIR motion sensor, IR Motion Sensor. An IR sensor senses the heat of an object and detects its motion within some range as it emits infrared radiations and this complete process can be controlled by microcontroller. Along with that security system can be applied in this concept by programming the microcontroller in such a way that if there is some movement in an area then lights must get ON/OFF automatically or any alarm must start. This chapter proposes the framework for the smart lightning with security systems in a building so that electrical power can be utilized efficiently and secures the building.

With the increasing prevalence of mobile devices, face-to-face device-to-device (D2D) communication has been applied to a variety of daily scenarios such as mobile payment and short distance file transfer. In D2D communications, a critical security problem is verifying the legitimacy of devices when they share no secrets in advance. Previous research addressed the problem with device authentication and pairing schemes based on user intervention or exploiting physical properties of the radio or acoustic channels. However, a remaining challenge is to secure face-to-face D2D communication even in the middle of a crowd, within which an attacker may hide. In this paper, we present Nhuth, a nonlinearity-enhanced, location-sensitive authentication mechanism for such communication. Especially, we target at the secure authentication within a limited range such as 20 cm, which is the common case for face-to-face scenarios. Nhuth contains averification scheme based on the nonlinear distortion of speaker-microphone systems and a location-based-validation model. The verification scheme guarantees device authentication consistency by extracting acoustic nonlinearity patterns (ANP) while the validation model ensures device legitimacy by measuring the time difference of arrival (TDOA) at two microphones. We analyze the security of Nhuth theoretically and evaluate its performance experimentally. Results show that Nhuth can verify the device legitimacy in the presence of nearby attackers.

This paper designed a longitudinal bending coupled piezoelectric transducer. The transducer is composed of a rear metal block, a longitudinally polarized piezoelectric ceramic piece and a slotted round front cover. The longitudinal vibration of the piezoelectric oscillators drive the front cover to generate bending vibration to widen the operating frequency band while reducing the fluctuation of transmission voltage response. In this paper, the design method of this multimode coupled transducer is given, and the method is verified by numerical simulation. The results show that the analytical theory and numerical simulation results have good consistency. This longitudinal-flexural coupled vibration transducer widens the bandwidth while preserving the emission voltage response.

To experimentally study the characteristics of ultrasonic sensors, a wideband air-coupled ultrasonic transducer, wideband electromagnetic dynamic acoustic transducer (WEMDAT), is designed and fabricated. Characterisation methods, including electrical impedance analysis, laser Doppler vibrometry and pressure-field microphone measurement, are used to examine the performance of the WEMDAT, which have shown that the transducer has a wide bandwidth ranging approximately from 47 kHz to 145 kHz and a good directivity with a beam angle of around 20˚ with no evident side lobes. A 40 kHz commercial flexural ultrasonic transducer (FUT) is then taken as an example to receive ultrasonic waves in a pitch-catch configuration to evaluate the performance of the WEMDAT as an acoustic source. Experiment results have demonstrated that the WEMDAT can maintain the most of the frequency content of a 5 cycle 40 kHz tone burst electric signal and convert it into an ultrasonic wave for studying the dynamic characteristic and the directivity pattern of the ultrasonic receiver. A comparison of the dynamic characteristics between the transmitting and the receiving processes of the same FUT reveals that the FUT has a wider bandwidth when operating as an ultrasonic receiver than operating as a transmitter, which indicates that it is necessary to quantitatively investigate the receiving process of an ultrasonic transducer, demonstrating a huge potential of the WEMDAT serving as a standard acoustic source for ultrasonic sensors for various air-coupled ultrasonic applications.

Mechanism to-Rube Goldberg invention accord is normal habituated to for apartment phones and Internet of Things. Agree and central knowledge are open to meet an unfailing turning between twosome gadgets. In ignoble fracas, factual methodologies many a time eon wait on a prefabricated solitarily pronunciation database and bear the ill effects of serene age rate. We verifiable GeneWave, a brusque gadget inspection and root assention convention for item cell phones. GeneWave mischievous accomplishes bidirectional ingenious inspection office on the physical reaction meantime between two gadgets. To evade the resolution of interim in compliance, we overshadow overseas time fragility on ware gadgets skim through steep flag location and excess time crossing out. At zigzag goal, we success out the elementary acoustic channel reaction for gadget verification. We combination an extraordinary coding pointing for virtual key assention while guaranteeing security. Consequently, two gadgets heart signal couple choice and safely concur on a symmetric key.

User authentication on smartphones must satisfy both security and convenience, an inherently difficult balancing art. Apple's FaceID is arguably the latest of such efforts, at the cost of additional hardware (e.g., dot projector, flood illuminator and infrared camera). We propose a novel user authentication system EchoPrint, which leverages acoustics and vision for secure and convenient user authentication, without requiring any special hardware. EchoPrint actively emits almost inaudible acoustic signals from the earpiece speaker to "illuminate" the user's face and authenticates the user by the unique features extracted from the echoes bouncing off the 3D facial contour. To combat changes in phone-holding poses thus echoes, a Convolutional Neural Network (CNN) is trained to extract reliable acoustic features, which are further combined with visual facial landmark locations to feed a binary Support Vector Machine (SVM) classifier for final authentication. Because the echo features depend on 3D facial geometries, EchoPrint is not easily spoofed by images or videos like 2D visual face recognition systems. It needs only commodity hardware, thus avoiding the extra costs of special sensors in solutions like FaceID. Experiments with 62 volunteers and non-human objects such as images, photos, and sculptures show that EchoPrint achieves 93.75% balanced accuracy and 93.50% F-score, while the average precision is 98.05%, and no image/video based attack is observed to succeed in spoofing.

Active Noise Cancellation (ANC) is a classical area where noise in the environment is canceled by producing anti-noise signals near the human ears (e.g., in Bose's noise cancellation headphones). This paper brings IoT to active noise cancellation by combining wireless communication with acoustics. The core idea is to place an IoT device in the environment that listens to ambient sounds and forwards the sound over its wireless radio. Since wireless signals travel much faster than sound, our ear-device receives the sound in advance of its actual arrival. This serves as a glimpse into the future, that we call lookahead, and proves crucial for real-time noise cancellation, especially for unpredictable, wide-band sounds like music and speech. Using custom IoT hardware, as well as lookahead-aware cancellation algorithms, we demonstrate MUTE, a fully functional noise cancellation prototype that outperforms Bose's latest ANC headphone. Importantly, our design does not need to block the ear - the ear canal remains open, making it comfortable (and healthier) for continuous use.

Additive manufacturing (AM, or 3D printing) is a novel manufacturing technology that has been adopted in industrial and consumer settings. However, the reliance of this technology on computerization has raised various security concerns. In this paper, we address issues associated with sabotage via tampering during the 3D printing process by presenting an approach that can verify the integrity of a 3D printed object. Our approach operates on acoustic side-channel emanations generated by the 3D printer’s stepper motors, which results in a non-intrusive and real-time validation process that is difficult to compromise. The proposed approach constitutes two algorithms. The first algorithm is used to generate a master audio fingerprint for the verifiable unaltered printing process. The second algorithm is applied when the same 3D object is printed again, and this algorithm validates the monitored 3D printing process by assessing the similarity of its audio signature with the master audio fingerprint. To evaluate the quality of the proposed thresholds, we identify the detectability thresholds for the following minimal tampering primitives: insertion, deletion, replacement, and modification of a single tool path command. By detecting the deviation at the time of occurrence, we can stop the printing process for compromised objects, thus saving time and preventing material waste. We discuss various factors that impact the method, such as background noise, audio device changes and different audio recorder positions.

Device-to-device communication is widely used for mobile devices and Internet of Things. Authentication and key agreement are critical to build a secure channel between two devices. However, existing approaches often rely on a pre-built fingerprint database and suffer from low key generation rate. We present GeneWave, a fast device authentication and key agreement protocol for commodity mobile devices. GeneWave first achieves bidirectional initial authentication based on the physical response interval between two devices. To keep the accuracy of interval estimation, we eliminate time uncertainty on commodity devices through fast signal detection and redundancy time cancellation. Then, we derive the initial acoustic channel response for device authentication. We design a novel coding scheme for efficient key agreement while ensuring security. Therefore, two devices can authenticate each other and securely agree on a symmetric key. GeneWave requires neither special hardware nor pre-built fingerprint database, and thus it is easyto-use on commercial mobile devices. We implement GeneWave on mobile devices (i.e., Nexus 5X and Nexus 6P) and evaluate its performance through extensive experiments. Experimental results show that GeneWave efficiently accomplish secure key agreement on commodity smartphones with a key generation rate 10× faster than the state-of-the-art approach.

Human computer operations such as writing documents and playing games have become popular in our daily lives. These activities (especially if identified in a non-intrusive manner) can be used to facilitate context-aware services. In this paper, we propose to recognize human computer operations through keystroke sensing with a smartphone. Specifically, we first utilize the microphone embedded in a smartphone to sense the input audio from a computer keyboard. We then identify keystrokes using fingerprint identification techniques. The determined keystrokes are then corrected with a word recognition procedure, which utilizes the relations of adjacent letters in a word. Finally, by fusing both semantic and acoustic features, a classification model is constructed to recognize four typical human computer operations: 1) chatting; 2) coding; 3) writing documents; and 4) playing games. We recruited 15 volunteers to complete these operations, and evaluated the proposed approach from multiple aspects in realistic environments. Experimental results validated the effectiveness of our approach.

To prevent users' privacy from leakage, more and more mobile devices employ biometric-based authentication approaches, such as fingerprint, face recognition, voiceprint authentications, etc., to enhance the privacy protection. However, these approaches are vulnerable to replay attacks. Although state-of-art solutions utilize liveness verification to combat the attacks, existing approaches are sensitive to ambient environments, such as ambient lights and surrounding audible noises. Towards this end, we explore liveness verification of user authentication leveraging users' lip movements, which are robust to noisy environments. In this paper, we propose a lip reading-based user authentication system, LipPass, which extracts unique behavioral characteristics of users' speaking lips leveraging build-in audio devices on smartphones for user authentication. We first investigate Doppler profiles of acoustic signals caused by users' speaking lips, and find that there are unique lip movement patterns for different individuals. To characterize the lip movements, we propose a deep learning-based method to extract efficient features from Doppler profiles, and employ Support Vector Machine and Support Vector Domain Description to construct binary classifiers and spoofer detectors for user identification and spoofer detection, respectively. Afterwards, we develop a binary tree-based authentication approach to accurately identify each individual leveraging these binary classifiers and spoofer detectors with respect to registered users. Through extensive experiments involving 48 volunteers in four real environments, LipPass can achieve 90.21% accuracy in user identification and 93.1% accuracy in spoofer detection.

Indoor localization of unknown acoustic events with MEMS microphone arrays have a huge potential in applications like home assisted living and surveillance. This article presents an Angle of Arrival (AoA) fingerprinting method for use in Wireless Acoustic Sensor Networks (WASNs) with low-profile microphone arrays. In a first research phase, acoustic measurements are performed in an anechoic room to evaluate two computationally efficient time domain delay-based AoA algorithms: one based on dot product calculations and another based on dot products with a PHAse Transform (PHAT). The evaluation of the algorithms is conducted with two sound events: white noise and a female voice. The algorithms are able to calculate the AoA with Root Mean Square Errors (RMSEs) of 3.5° for white noise and 9.8° to 16° for female vocal sounds. In the second research phase, an AoA fingerprinting algorithm is developed for acoustic event localization. The proposed solution is experimentally verified in a room of 4.25 m by 9.20 m with 4 acoustic sensor nodes. Acoustic fingerprints of white noise, recorded along a predefined grid in the room, are used to localize white noise and vocal sounds. The localization errors are evaluated using one node at a time, resulting in mean localization errors between 0.65 m and 0.98 m for white noise and between 1.18 m and 1.52 m for vocal sounds.

This paper presents netsim, a combined software/hardware system for performing realtime realistic operation of autonomous underwater vehicles (AUVs) with acoustic modem telemetry in a virtual ocean environment. The design of the system is flexible to the choice of physical link hardware, allowing for the system to be tested against existing and new modems. Additionally, the virtual ocean channel simulator is designed to perform in real time by coupling less frequent asynchronous queries to high-fidelity models of the ocean environment and acoustic propagation with frequent pertubation-based updates for the exact position of the simulated AUVs. The results demonstrate the performance of this system using the WHOI Micro-Modem 2 hardware in the virtual ocean environment of the Arctic Beaufort Sea around 73 degrees latitude. The acoustic environment in this area has changed dramatically in recent years due to the changing climate.

The aim of the project SIMOPERA is to simulate and optimize the acoustics in large and complex rooms, with special focus on the Deutsche Oper Berlin as an example of application. Firstly, characteristic subspaces of the opera are considered such as the orchestra pit, the stage and the auditorium. Special attention is paid to the orchestra pit, where high sound pressure levels can occur, leading to noise related risks for the musicians. However, lowering the sound pressure level in the orchestra pit should not violate other objectives as the propagation of sound into the auditorium, the balance between the stage performers and the orchestra across the hall, and the mutual audibility between performers and orchestra members. For that reason, a hybrid simulation method consisting of the wave-based Finite Element Method (FEM) and the Boundary Element Method (BEM) for low frequencies and geometrical methods like the mirror source method and ray tracing for higher frequencies is developed in order to determine the relevant room acoustic quantities such as impulse response functions, reverberation time, clarity, center time etc. Measurements in the opera will continuously accompany the numerical calculations. Finally, selected constructive means for reducing the sound level in the orchestra pit will be analyzed.

Wireless transmission of power has been in research for over a century. Our project aims at transmitting electric power over a distance of room. Various methods using microwaves, lasers, inductive coupling, capacitive coupling and acoustic medium have been used. In our project, we are majorly focusing on acoustic method of transferring power. Previous attempts of transferring power using acoustic methods have employed the usage of ultrasonic sound. In our project, we are using infrasonic sound as a medium to transfer electrical power. For this purpose, we are using suitable transducers and converters to transmit electric power from the 220V AC power supply to a load over a considerable distance. This technology can be used to wirelessly charge various devices more effectively.

In this work, a measurement system is developed based on acoustic resonance which can be used for classification of materials. Basically, the inspection methods based on acoustic, utilized for containers screening in the field, identification of defective pills hold high significance in the fields of health, security and protection. However, such techniques are constrained by costly instrumentation, offline analysis and complexities identified with transducer holder physical coupling. So a simple, non-destructive and amazingly cost effective technique in view of acoustic resonance has been formulated here for quick data acquisition and analysis of acoustic signature of liquids for their constituent identification and classification. In this system, there are two ceramic coated piezoelectric transducers attached at both ends of V-shaped glass, one is act as transmitter and another as receiver. The transmitter generates sound with the help of white noise generator. The pick up transducer on another end of the V-shaped glass rod detects the transmitted signal. The recording is being done with arduino interfaced to computer. The FFTs of recorded signals are being analyzed and the resulted resonant frequency observed for water, water+salt and water+sugar are 4.8 KHz, 6.8 KHz and 3.2 KHz respectively. The different resonant frequency in case different sample is being observed which shows that the developed prototype model effectively classifying the materials.

Distinguishing and classifying different types of malware is important to better understanding how they can infect computers and devices, the threat level they pose and how to protect against them. In this paper, a system for classifying malware programs is presented. The paper describes the architecture of the system and assesses its performance on a publicly available database (provided by Microsoft for the Microsoft Malware Classification Challenge BIG2015) to serve as a benchmark for future research efforts. First, the malicious programs are preprocessed such that they are visualized as gray scale images. We then make use of an architecture comprised of multiple layers (multiple levels of encoding) to carry out the classification process of those images/programs. We compare the performance of this approach against traditional machine learning and pattern recognition algorithms. Our experimental results show that the deep learning architecture yields a boost in performance over those conventional/standard algorithms. A hold-out validation analysis using the superior architecture shows an accuracy in the order of 99.15%.

On account of large and inconsistent propagation delays during transmission in Underwater Wireless Sensor Networks (UWSNs), wormholes bring more destructive than many attacks to localization applications. As a localization algorithm, DV-hop is classic but without secure scheme. A secure localization algorithm for UWSNs- RDV-HOP is brought out, which is based on reputation values and the constraints of propagation distance in UWSNs. In RDV-HOP, the anchor nodes evaluate the reputation of paths to other anchor nodes and broadcast these reputation values to the network. Unknown nodes select credible anchors nodes with high reputation to locate. We analyze the influence of the location accuracy with some parameters in the simulation experiments. The results show that the proposed algorithm can reduce the location error under the wormhole attack.

A lot of research in security of cyber physical systems focus on threat models where an attacker can spoof sensor readings by compromising the communication channel. A little focus is given to attacks on physical components. In this paper a method to detect potential attacks on physical components in a Cyber Physical System (CPS) is proposed. Physical attacks are detected through a comparison of noise pattern from sensor measurements to a reference noise pattern. If an adversary has physically modified or replaced a sensor, the proposed method issues an alert indicating that a sensor is probably compromised or is defective. A reference noise pattern is established from the sensor data using a deterministic model. This pattern is referred to as a fingerprint of the corresponding sensor. The fingerprint so derived is used as a reference to identify measured data during the operation of a CPS. Extensive experimentation with ultrasonic level sensors in a realistic water treatment testbed point to the effectiveness of the proposed fingerprinting method in detecting physical attacks.

One of the primary motivations for using ultrasound reflectometry for fingerprint imaging is the promise of increased spoof resistance over conventional optical or capacitive sensing approaches due to the ability for ultrasound to determine the elastic impedance of the imaged material. A fake 3D printed plastic finger can therefore be easily distinguished from a real finger. However, ultrasonic sensors are still vulnerable to materials that are similar in impedance to tissue, such as water or rubber. Previously we demonstrated an ultrasonic fingerprint reader operating with 1.3GHz ultrasound based on pulse echo impedance imaging on the backside silicon interface. In this work, we utilize the large bandwidth of these sensors to differentiate between a finger and materials with similar impedances using the frequency response of elastic impedance obtained by transducer excitation with a wideband RF chirp signal. The reflected signal is a strong function of impedance mismatch and absorption [Hoople 2015].