Biblio
As an extension of cloud computing, fog computing is proving itself more and more potentially useful nowadays. Fog computing is introduced to overcome the shortcomings of cloud computing paradigm in handling the massive amount of traffic caused by the enormous number of Internet of Things devices being increasingly connected to the Internet on daily basis. Despite its advantages, fog architecture introduces new security and privacy threats that need to be studied and solved as soon as possible. In this work, we explore two privacy issues posed by the fog computing architecture and we define privacy challenges according to them. The first challenge is related to the fog's design purposes of reducing the latency and improving the bandwidth, where the existing privacy-preserving methods violate these design purposed. The other challenge is related to the proximity of fog nodes to the end-users or IoT devices. We discuss the importance of addressing these challenges by putting them in the context of real-life scenarios. Finally, we propose a privacy-preserving fog computing paradigm that solves these challenges and we assess the security and efficiency of our solution.
The panic among medical control, information, and device administrators is due to surmounting number of high-profile attacks on healthcare facilities. This hostile situation is going to lead the health informatics industry to cloud-hoarding of medical data, control flows, and site governance. While different healthcare enterprises opt for cloud-based solutions, it is a matter of time when fog computing environment are formed. Because of major gaps in reported techniques for fog security administration for health data i.e. absence of an overarching certification authority (CA), the security provisioning is one of the the issue that we address in this paper. We propose a security provisioning model (AZSPM) for medical devices in fog environments. We propose that the AZSPM can be build by using atomic security components that are dynamically composed. The verification of authenticity of the atomic components, for trust sake, is performed by calculating the processor clock cycles from service execution at the resident hardware platform. This verification is performed in the fully sand boxed environment. The results of the execution cycles are matched with the service specifications from the manufacturer before forwarding the mobile services to the healthcare cloud-lets. The proposed model is completely novel in the fog computing environments. We aim at building the prototype based on this model in a healthcare information system environment.
With the evolution of computing from using personal computers to use of online Internet of Things (IoT) services and applications, security risks have also evolved as a major concern. The use of Fog computing enhances reliability and availability of the online services due to enhanced heterogeneity and increased number of computing servers. However, security remains an open challenge. Various trust models have been proposed to measure the security strength of available service providers. We utilize the quantized security of Datacenters and propose a new security-based service broker policy(SbSBP) for Fog computing environment to allocate the optimal Datacenter(s) to serve users' requests based on users' requirements of cost, time and security. Further, considering the dynamic nature of Fog computing, the concept of dynamic reconfiguration has been added. Comparative analysis of simulation results shows the effectiveness of proposed policy to incorporate users' requirements in the decision-making process.
As the Internet of Things (IoT) continues to grow, there arises concerns and challenges with regard to the security and privacy of the IoT system. In this paper, we propose a FOg CompUting-based Security (FOCUS) system to address the security challenges in the IoT. The proposed FOCUS system leverages the virtual private network (VPN) to secure the access channel to the IoT devices. In addition, FOCUS adopts a challenge-response authentication to protect the VPN server against distributed denial of service (DDoS) attacks, which can further enhance the security of the IoT system. FOCUS is implemented in fog computing that is close to the end users, thus achieving a fast and efficient protection. We demonstrate FOCUS in a proof-of-concept prototype, and conduct experiments to evaluate its performance. The results show that FOCUS can effectively filter out malicious attacks with a very low response latency.
Cloud computing has established itself as an alternative IT infrastructure and service model. However, as with all logically centralized resource and service provisioning infrastructures, cloud does not handle well local issues involving a large number of networked elements (IoTs) and it is not responsive enough for many applications that require immediate attention of a local controller. Fog computing preserves many benefits of cloud computing and it is also in a good position to address these local and performance issues because its resources and specific services are virtualized and located at the edge of the customer premise. However, data security is a critical challenge in fog computing especially when fog nodes and their data move frequently in its environment. This paper addresses the data protection and the performance issues by 1) proposing a Region-Based Trust-Aware (RBTA) model for trust translation among fog nodes of regions, 2) introducing a Fog-based Privacy-aware Role Based Access Control (FPRBAC) for access control at fog nodes, and 3) developing a mobility management service to handle changes of users and fog devices' locations. The implementation results demonstrate the feasibility and the efficiency of our proposed framework.
The paradigm of fog computing has set new trends and heights in the modern world networking and have overcome the major technical complexities of cloud computing. It is not a replacement of cloud computing technology but it just adds feasible advanced characteristics to existing cloud computing paradigm.fog computing not only provide storage, networking and computing services but also provide a platform for IoT (internet of things). However, the fog computing technology also arise the threat to privacy and security of the data and services. The existing security and privacy mechanisms of the cloud computing cannot be applied to the fog computing directly due to its basic characteristics of large-scale geo-distribution, mobility and heterogeneity. This article provides an overview of the present existing issues and challenges in fog computing.
Fog computing provides a new architecture for the implementation of the Internet of Things (IoT), which can connect sensor nodes to the cloud using the edge of the network. This structure has improved the latency and energy consumption in the cloud. In this heterogeneous and distributed environment, resource allocation is very important. Hence, scheduling will be a challenge to increase productivity and allocate resources appropriately to the tasks. Programs that run in this environment should be protected from intruders. We consider three parameters as authentication, integrity, and confidentiality to maintain security in fog devices. These parameters have time and computational overhead. In the proposed approach, we schedule the modules for the run in fog devices by heuristic algorithms based on data mining technique. The objective function is included CPU utilization, bandwidth, and security overhead. We compare the proposed algorithm with several heuristic algorithms. The results show that our proposed algorithm improved the average energy consumption of 63.27%, cost 44.71% relative to the PSO, ACO, SA algorithms.
We present OpenFace, our new open-source face recognition system that approaches state-of-the-art accuracy. Integrating OpenFace with inter-frame tracking, we build RTFace, a mechanism for denaturing video streams that selectively blurs faces according to specified policies at full frame rates. This enables privacy management for live video analytics while providing a secure approach for handling retrospective policy exceptions. Finally, we present a scalable, privacy-aware architecture for large camera networks using RTFace.
Edge Computing is a scheme to improve the performance, latency and security guidelines for IoT applications. However, edge deployment of an application also comes with additional complexity in management, an increased attack surface for security vulnerability, and could potentially result in a more expensive solution. As a result, the conditions under which an edge deployment of IoT applications delivers a better solution is not always obvious. Metrics which would be able to predict whether or not an IoT application is suitable for edge deployment can provide useful insights to address this question. In this paper, we examine the key performance indicators for IoT applications, namely the responsiveness, scalability and cost models for different types of IoT applications. Our analysis identifies that network centrality of an IoT application is a key characteristic which determines whether or not an IoT application is a good candidate for edge deployment. We discuss the different measures of network centrality that can be used to characterize applications, and the relative performance of edge deployment compared to centralized deployment for various IoT applications.
Cloud computing is a solution to reduce the cost of IT by providing elastic access to shared resources. It also provides solutions for on-demand computing power and storage for devices at the edge networks with limited resources. However, increasing the number of connected devices caused by IoT architecture leads to higher network traffic and delay for cloud computing. The centralised architecture of cloud computing also makes the edge networks more susceptible to challenges in the core network. Fog computing is a solution to decrease the network traffic, delay, and increase network resilience. In this paper, we study how fog computing may improve network resilience. We also conduct a simulation to study the effect of fog computing on network traffic and delay. We conclude that using fog computing prepares the network for better response time in case of interactive requests and makes the edge networks more resilient to challenges in the core network.
The IoT (Internet of Things) is one of the primary reasons for the massive growth in the number of connected devices to the Internet, thus leading to an increased volume of traffic in the core network. Fog and edge computing are becoming a solution to handle IoT traffic by moving timesensitive processing to the edge of the network, while using the conventional cloud for historical analysis and long-term storage. Providing processing, storage, and network communication at the edge network are the aim of fog computing to reduce delay, network traffic, and decentralise computing. In this paper, we define a framework that realises fog computing that can be extended to install any service of choice. Our framework utilises fog nodes as an extension of the traditional switch to include processing, networking, and storage. The fog nodes act as local decision-making elements that interface with software-defined networking (SDN), to be able to push updates throughout the network. To test our framework, we develop an IP spoofing security application and ensure its correctness through multiple experiments.
Vehicular ad-Hoc Networks (VANETs) have been promoted as a key technology that can provide a wide variety of services such as traffic management, passenger safety, as well as travel convenience and comfort. VANETs are now proposed to be part of the upcoming Fifth Generation (5G) technology, integrated with Software Defined Networking (SDN), as key enabler of 5G. The technology of fog computing in 5G turned out to be an adequate solution for faster processing in delay sensitive application, such as VANETs, being a hybrid solution between fully centralized and fully distributed networks. In this paper, we propose a three-way integration between VANETs, SDN, and 5G for a resilient VANET security design approach, which strikes a good balance between network, mobility, performance and security features. We show how such an approach can secure VANETs from different types of attacks such as Distributed Denial of Service (DDoS) targeting either the controllers or the vehicles in the network, and how to trace back the source of the attack. Our evaluation shows the capability of the proposed system to enforce different levels of real-time user-defined security, while maintaining low overhead and minimal configuration.
Distributed Denial of Service (DDoS) is a sophisticated cyber-attack due to its variety of types and techniques. The traditional mitigation method of this attack is to deploy dedicated security appliances such as firewall, load balancer, etc. However, due to the limited capacity of the hardware and the potential high volume of DDoS traffic, it may not be able to defend all the attacks. Therefore, cloud-based DDoS protection services were introduced to allow the organizations to redirect their traffic to the scrubbing centers in the cloud for filtering. This solution has some drawbacks such as privacy violation and latency. More recently, Network Functions Virtualization (NFV) and edge computing have been proposed as new networking service models. In this paper, we design a framework that leverages NFV and edge computing for DDoS mitigation through two-stage processes.
In this paper we propose a protocol that allows end-users in a decentralized setup (without requiring any trusted third party) to protect data shipped to remote servers using two factors - knowledge (passwords) and possession (a time based one time password generation for authentication) that is portable. The protocol also supports revocation and recreation of a new possession factor if the older possession factor is compromised, provided the legitimate owner still has a copy of the possession factor. Furthermore, akin to some other recent works, our approach naturally protects the outsourced data from the storage servers themselves, by application of encryption and dispersal of information across multiple servers. We also extend the basic protocol to demonstrate how collaboration can be supported even while the stored content is encrypted, and where each collaborator is still restrained from accessing the data through a multi-factor access mechanism. Such techniques achieving layered security is crucial to (opportunistically) harness storage resources from untrusted entities.
The notion of edge computing introduces new computing functions away from centralized locations and closer to the network edge and thus facilitating new applications and services. This enhanced computing paradigm is provides new opportunities to applications developers, not available otherwise. In this talk, I will discuss why placing computation functions at the extreme edge of our network infrastructure, i.e., in wireless Access Points and home set-top boxes, is particularly beneficial for a large class of emerging applications. I will discuss a specific approach, called ParaDrop, to implement such edge computing functionalities, and use examples from different domains – smarter homes, sustainability, and intelligent transportation – to illustrate the new opportunities around this concept.
Wearable devices, which are small electronic devices worn on a human body, are equipped with low level of processing and storage capacities and offer some types of integrated functionalities. Recently, wearable device is becoming increasingly popular, various kinds of wearable device are launched in the market; however, wearable devices require a powerful local-hub, most are smartphone, to replenish processing and storage capacities for advanced functionalities. Sometime it may be inconvenient to carry the local-hub (smartphone); thus, many wearable devices are equipped with Wi-Fi interface, enabling them to exchange data with local-hub though the Internet when the local-hub is not nearby. However, this results in long response time and restricted functionalities. In this paper, we present a virtual local-hub solution, which utilizes network equipment nearby (e.g., Wi-Fi APs) as the local-hub. Since migrating all applications serving the wearable devices respectively takes too much networking and storage resources, the proposed solution deploys function modules to multiple network nodes and enables remote function module sharing among different users and applications. To reduce the impact of the solution on the network bandwidth, we propose a heuristic algorithm for function module allocation with the objective of minimizing total bandwidth consumption. We conduct series of experiments, and the results show that the proposed solution can reduce the bandwidth consumption by up to half and still serve all requests given a large number of service requests.