Biblio

Recently, in solving problems of sound radiation by systems of piezoceramic radiators, new approaches have emerged, which make it possible to significantly approximate the design parameters of systems to the actually measured ones. These approaches are associated with taking into account the specific features of these systems performing two functions - the function of converting electrical energy into acoustic energy and the function of forming the latter in the surrounding space. The peculiarity of the first function is the interconnection of the electric, mechanical and acoustic fields during energy conversion. The peculiarity of the second function is the interaction of the radiators in the system during the formation of its acoustic field. The aim of the work is to study the effect of acoustic interaction of cylindrical piezoceramic radiators in the composition of flat systems on their physical fields. Using the method of coupled fields in multiply connected domains, using the addition theorems for cylindrical wave functions, we obtain analytical relations that allow one to calculate the numerical results for the parameters of three interconnected physical fields that ensure the emission of sound by plane systems. Their analysis showed that with the radial symmetry of electrical excitation of cylindrical radiators, the conversion of electrical energy into mechanical energy is carried out on one - zero mode of oscillation. The placement of the radiators in the composition of the flat systems leads to the appearance of the effect of acoustic interaction between them in an external field, due to the multiple exchange of radiated and scattered waves. This effect destroys the radial symmetry of the acoustic loading of a single radiator. The violation of symmetry in the conversion of mechanical energy into acoustic energy leads to the appearance of oscillations that follow the zero mode. As a result, there is an effective redistribution of energy “pumped” into the radiators in the zero mode, between subsequent oscillations of the radiators. In turn, the emergence of new modes changes the acoustic field of a flat system. The results show the need to take into account the above features of the physical fields of the radiators in the composition of flat systems when choosing methods and developing methods for measuring field characteristics.

Solidly mounted resonators (SMRs) built on dielectric acoustic reflectors can save several fabrication steps as well as avoid undesired parasitic effects when exciting extended electrodes via capacitive coupling. In this work we manufacture and measure the frequency response of AlN-based SMRs built on 7-layer ZnO/SiO2 acoustic reflectors with SiO2 working as low impedance material and ZnO as high impedance material. After applying a 700°C treatment, their frequency response is measured again and compared with the pre-treatment measurements.

The Inertial Navigation System(INS) and Doppler Velocity Logs(DVL) which are used frequently on autonomous underwater vehicles can be fused under different types of integration architectures. These architectures differ in terms of algorithm requirements and complexity. DVL may experience acoustic beam losses during operation due to environmental factors and abilities of the sensor. In these situations, radial velocity information cannot be received from lost acoustic beam. In this paper, the performances of INS and DVL integration under tightly and loosely coupled architectures are comparatively presented with simulations. In the tightly coupled approach, navigation filter is updated with solely available beam measurements by using sequential measurement update method, and the sensitivity of this method is investigated for acoustic beam losses.

A High Overtone Bulk Acoustic Wave Resonator (HBAR) is fabricated with the active material being Ba0.5Sr0.5TiO3 (BST). Owing to its strong electrostrictive property, the BST needs an external dc voltage to yield an electromechanical coupling. The variations in resonances with respect to varying dc fields are noted and analyzed with the aid of an Resonant Spectrum Method (RSM) model. Effective coupling coefficient \$(\textbackslashmathrmK\_\textbackslashmathrme\textbackslashmathrmf\textbackslashmathrmfˆ2(%))\$ in the case of employed MIM based structure is observed and the comparisons are drawn with the corresponding values of the CPC structures. An improvement of 70% in the value of \$\textbackslashmathrmK\_\textbackslashmathrme\textbackslashmathrmf\textbackslashmathrmfˆ2\$(%)at 1.34 GHz is witnessed in MIM structures because of direct access to the bottom electrode of the structure.

The spatial-temporal random variation characteristics of underwater acoustic channel make the difference among the underwater acoustic communication network link channels, which make network performance difficult to predict. In order to better understand the fluctuation and difference of network link channel, we analyze the measured channel data of five links in the Qiandao Lake underwater acoustic communication network experiment. This paper first estimates impulse response, spread function, power delay profile and Doppler power spectrum of the time-varying channel in a short detection time, and compares the time-frequency energy distribution characteristics of each link channel. Then, we statistically analyze the discreteness of the signal to noise ratio, multipath spread and Doppler spread parameter distributions for a total of145 channels over a long observation period. The results show that energy distribution structure and fading fluctuation scale of each link channel in underwater acoustic communication network are obviously different.

The measurement of room acoustics plays a wide role in audio research, from physical acoustics modelling and virtual reality applications to speech enhancement. While vast literature exists on position-dependent room acoustics and coupling of rooms, little has explored the transition from one room to its neighbour. This paper presents the measurement and analysis of a dataset of spatial room impulse responses for the transition between four coupled room pairs. Each transition consists of 101 impulse responses recorded using a fourth-order spherical microphone array in 5 cm intervals, both with and without a continuous line-of-sight between the source and microphone. A numerical analysis of the room transitions is then presented, including direct-to-reverberant ratio and direction of arrival estimations, along with potential applications and uses of the dataset.

We present results from a vibrating mesh nebulizer for which the mesh is a micro-machined silicon membrane perforated with up to a thousand micron-sized, pyramidal holes. Finite element modelling is used to better understand the measured results of the nebulizer when tested in the dry state as well as when loaded with a liquid. In particular, we found that the frequency response of the system is well represented by the superposition of the frequency response of its two main subcomponents: the piezo driving unit and the silicon membrane. As such, the system is found to have resonance peaks for which the complete assembly flexes in addition to peaks that correspond to the flexural resonance modes of the silicon membrane on its own. Similarly, finite element modelling was used to understand differences observed between the frequency response measured on the nebulizer in the dry condition compared to its wet or liquid loaded operation. It was found that coupling between the structural and the acoustic domains shifts the resonance peaks significantly to the left of the frequency plot. In fact, it was found that at the operating frequency of the nebulizer, the system resonates in a (0,3) when the membrane is loaded with a liquid compared with a (0,2) resonance mode when it is operating in the dry state.

Indoor localization of unknown acoustic events with MEMS microphone arrays have a huge potential in applications like home assisted living and surveillance. This article presents an Angle of Arrival (AoA) fingerprinting method for use in Wireless Acoustic Sensor Networks (WASNs) with low-profile microphone arrays. In a first research phase, acoustic measurements are performed in an anechoic room to evaluate two computationally efficient time domain delay-based AoA algorithms: one based on dot product calculations and another based on dot products with a PHAse Transform (PHAT). The evaluation of the algorithms is conducted with two sound events: white noise and a female voice. The algorithms are able to calculate the AoA with Root Mean Square Errors (RMSEs) of 3.5° for white noise and 9.8° to 16° for female vocal sounds. In the second research phase, an AoA fingerprinting algorithm is developed for acoustic event localization. The proposed solution is experimentally verified in a room of 4.25 m by 9.20 m with 4 acoustic sensor nodes. Acoustic fingerprints of white noise, recorded along a predefined grid in the room, are used to localize white noise and vocal sounds. The localization errors are evaluated using one node at a time, resulting in mean localization errors between 0.65 m and 0.98 m for white noise and between 1.18 m and 1.52 m for vocal sounds.

We report time-domain measurements of acoustic-wave-induced magnetization dynamics in magnetic tunnel junctions. The acoustic pulses are generated by femtosecond laser excitation and interact with the magnetization through magnetoelastic coupling. The induced magnetization precession is not only dependent on the externally applied magnetic field, but also on the laser excitation position. The presented method even allows us to coherently control the precession using two laser pulses at various magnetic fields and excitation positions.

The aim of the project SIMOPERA is to simulate and optimize the acoustics in large and complex rooms, with special focus on the Deutsche Oper Berlin as an example of application. Firstly, characteristic subspaces of the opera are considered such as the orchestra pit, the stage and the auditorium. Special attention is paid to the orchestra pit, where high sound pressure levels can occur, leading to noise related risks for the musicians. However, lowering the sound pressure level in the orchestra pit should not violate other objectives as the propagation of sound into the auditorium, the balance between the stage performers and the orchestra across the hall, and the mutual audibility between performers and orchestra members. For that reason, a hybrid simulation method consisting of the wave-based Finite Element Method (FEM) and the Boundary Element Method (BEM) for low frequencies and geometrical methods like the mirror source method and ray tracing for higher frequencies is developed in order to determine the relevant room acoustic quantities such as impulse response functions, reverberation time, clarity, center time etc. Measurements in the opera will continuously accompany the numerical calculations. Finally, selected constructive means for reducing the sound level in the orchestra pit will be analyzed.

This article presents PrOLoc, a localization system that combines partially homomorphic encryption with a new way of structuring the localization problem to enable emcient and accurate computation of a target's location while preserving the privacy of the observers.