Biblio

This paper discusses the outcome of combining insider threat agent taxonomies with the aim of enhancing insider threat detection. The objectives sought to explore taxonomy combinations and investigate threat sophistication from the taxonomy combinations. Investigations revealed the plausibility of combining the various taxonomy categories to derive a new taxonomy. An observation on category combinations yielded the introduction of the concept of a threat path. The proposed taxonomy tree consisted of more than a million threat-paths obtained using a formula from combinatorics analysis. The taxonomy category combinations thus increase the insider threat landscape and hence the gap between insider threat agent sophistication and countermeasures. On the defensive side, knowledge of insider threat agent taxonomy category combinations has the potential to enhance defensive countermeasure tactics, techniques and procedures, thus increasing the chances of insider threat detection.

Unmanned aerial vehicles (UAVs) and various network entities deployed on the ground can communicate with each other over the Internet of Drones (IoD), a network architecture designed expressly to allow communications between heterogenous entities. Drone technology has a wide range of uses, including on-demand package delivery, traffic and wild life surveillance, inspection of infrastructure and search, rescue and agriculture. However, IoD systems are vulnerable to numerous attacks, The main goal is to develop an all-encompassing security model that can be used to analyze security concerns in various UAV-based systems. With exceptional flexibility and increasing efficiency, trust management is a promising alternative to traditional detection methods. In a heterogeneous environment, it is also compatible with other security mechanisms. In this article, we present a fuzzy logic as an Insider Detection technique which calculate sensor data trust and assessing node behavior. To build confidence throughout the entire IoD, our proposal divides trust into two parts: Data trust and Node trust. This is in contrast to earlier models. Experimental results show that our solution is effective in terms of False positive ratio and Average of end-to-end delay.

Data Protection and Consenting Communication Mechanisms (DPCCMs) enable users to express their privacy decisions and manage their online consent. Thus, they can become a crucial means of protecting individuals' online privacy and agency, thereby replacing the current problematic practices such as “consent dialogues”. Based on an in-depth analysis of different DPCCMs, we propose an interdisciplinary set of factors that can be used for a comparison of such mechanisms. Moreover, we use the results from a qualitative expert study to identify some of the main multidisciplinary challenges that DPCCMs should address to become widely adopted data privacy mechanisms. We leverage both the factors and the challenges to compare two current open specifications, i.e. the Advanced Data Protection Control (ADPC) and the Global Privacy Control (GPC), and discuss future work.

This paper reports on the advanced assembly technology for small chip size of Fan-out WLP(FO-WLP) using high expansion tape. In a preceding paper, we reported that we have developed new tape expansion machine which can expand tape in four directions individually. Using this expansion machine device, we have developed high expansion tape which can get enough chip distance after expansion. Our expansion technology provides both high throughput and high placement accuracy. These previous studies have been evaluated using 3 mm x 3 mm chips assuming an actual FO-WLP device. Since our process can be handled by wafer size, smaller chip size improves throughput than larger chip size. In this study, we evaluate with 0.6 mm x 0.3 mm chip size and investigate tape characteristics required for small chip size expansion. By optimizing adhesive thickness and composition of adhesive, we succeed in developing high expansion tape for small chip size with good expandability and no adhesive residue on the expanded chip. We indicate that our proposal process is also effective for small chip size of FO-WLP.

Currently, research on 5G communication is focusing increasingly on communication techniques. The previous studies have primarily focused on the prevention of communications disruption. To date, there has not been sufficient research on network anomaly detection as a countermeasure against on security aspect. 5g network data will be more complex and dynamic, intelligent network anomaly detection is necessary solution for protecting the network infrastructure. However, since the AI-based network anomaly detection is dependent on data, it is difficult to collect the actual labeled data in the industrial field. Also, the performance degradation in the application process to real field may occur because of the domain shift. Therefore, in this paper, we research the intelligent network anomaly detection technique based on domain adaptation (DA) in 5G edge network in order to solve the problem caused by data-driven AI. It allows us to train the models in data-rich domains and apply detection techniques in insufficient amount of data. For Our method will contribute to AI-based network anomaly detection for improving the security for 5G edge network.

Currently in El Salvador, efforts are being made to implement the digital signature and as part of this technology, a Public Key Infrastructure (PKI) is required, which must validate Certificate Authorities (CA). For a CA, it is necessary to implement the software that allows it to manage digital certificates and perform security procedures for the execution of cryptographic operations, such as encryption, digital signatures, and non-repudiation of electronic transactions. The present work makes a proposal for a digital certificate management system according to the Digital Signature Law of El Salvador and secure cryptography standards. Additionally, a security discussion is accomplished.

In recent decades, a Distributed Denial of Service (DDoS) attack is one of the most expensive attacks for business organizations. The DDoS is a form of cyber-attack that disrupts the operation of computer resources and networks. As technology advances, the styles and tools used in these attacks become more diverse. These attacks are increased in frequency, volume, and intensity, and they can quickly disrupt the victim, resulting in a significant financial loss. In this paper, it is described the significance of DDOS attacks and propose a new method for detecting and mitigating the DDOS attacks by analyzing the traffics coming to the server from the BOTNET in attacking system. The process of analyzing the requests coming from the BOTNET uses the Machine learning algorithm in the decision making. The simulation is carried out and the results analyze the DDOS attack.

Internet of Things (IoT) and those protocol CoAP and MQTT has security issues that have entirely changed the security strategy should be utilized and behaved for devices restriction. Several challenges have been observed in multiple domains of security, but Distributed Denial of Service (DDoS) have actually dangerous in IoT that have RT. Thus, the IoT paradigm and those protocols CoAP and MQTT have been investigated to seek whether network services could be efficiently delivered for resources usage, managed, and disseminated to the devices. Internet of Things is justifiably joined with the best practices augmentation to make this task enriched. However, factors behaviors related to traditional networks have not been effectively mitigated until now. In this paper, we present and deep, qualitative, and comprehensive systematic mapping to find the answers to the following research questions, such as, (i) What is the state-of-the-art in IoT security, (ii) How to solve the restriction devices challenges via infrastructure involvement, (iii) What type of technical/protocol/ paradigm needs to be studied, and (iv) Security profile should be taken care of, (v) As the proposals are being evaluated: A. If in simulated/virtualized/emulated environment or; B. On real devices, in which case which devices. After doing a comparative study with other papers dictate that our work presents a timely contribution in terms of novel knowledge toward an understanding of formulating IoT security challenges under the IoT restriction devices take care.

Recently, a mechanism that randomly shuffles the data sent and allows securing the communication without the need to encrypt all the information has been proposed. This proposal is ideal for IoT systems with low computational capacity. In this work, we analyze the strength of this proposal from a brute-force attack approach to obtain the original message without knowledge of the applied disordering. It is demonstrated that for a set of 10x10 16-bit data, the processing time and the required memory are unfeasible with current technology. Therefore, it is safe.

Short-packet communication is a key enabler of various Internet of Things applications that require higher-level security. This proposal briefly reviews block orthogonal sparse superposition (BOSS) codes, which are applicable for secure short-packet transmissions. In addition, following the IEEE 802.11a Wi-Fi standards, we demonstrate the real-time performance of secure short packet transmission using a software-defined radio testbed to verify the feasibility of BOSS codes in a multi-path fading channel environment.

Microcontroller-based embedded systems have become ubiquitous with the emergence of IoT technology. Given its critical roles in many applications, its security is becoming increasingly important. Unfortunately, MCU devices are especially vulnerable. Code reuse attacks are particularly noteworthy since the memory address of firmware code is static. This work seeks to combat code reuse attacks, including ROP and more advanced JIT-ROP via continuous randomization. Previous proposals are geared towards full-fledged OSs with rich runtime environments, and therefore cannot be applied to MCUs. We propose the first solution for ARM-based MCUs. Our system, named HARM, comprises a secure runtime and a binary analysis tool with rewriting module. The secure runtime, protected inside the secure world, proactively triggers and performs non-bypassable randomization to the firmware running in a sandbox in the normal world. Our system does not rely on any firmware feature, and therefore is generally applicable to both bare-metal and RTOS-powered firmware. We have implemented a prototype on a development board. Our evaluation results indicate that HARM can effectively thaw code reuse attacks while keeping the performance and energy overhead low.

This paper proposes a cybersecurity maturity model to assess the capabilities of medical organizations to identify their level of maturity, prioritizing privacy and personal data protection. There are problems such as data breaches, the lack of security measures in health information, and the poor capacity of organizations to handle cybersecurity threats that generate concern in the health sector as they seek to mitigate risks in cyberspace. The proposal, based upon C2M2 (Cybersecurity Capability Maturity Model), incorporates practices and controls which allow organizations to identify security gaps generated through cyberattacks on sensitive health patient data. This model seeks to integrate the best practices related to privacy and protection of personal data in the Peruvian legal framework through the Administrative Directive No. 294-MINSA and the personal data protection Act No. 29733. The model consists of 3 evaluation phases. 1. Assessment planning; 2. Execution of the evaluation; 3. Implementation of improvements. The model was validated and tested in a public sector medical organization in Lima, Peru. The preliminary results showed that the organization is at Level 1 with 14% of compliance with established controls, 34% in risk, threat and vulnerability management practices and 19% in supply chain management. These the 3 highest percentages of the 10 evaluated domains.

The purpose of this research work is to develop an approach based on risk management with a view to provide managers and decision-makers with assistance and appropriate guidelines to combine Lean and Green in a successful and integrated way. Risk cannot be managed if not well-identified; hence, a classification of supply chain risks in a Lean Green context was provided. Subsequently to risk identification an approach based on Weighted Product Method (WPM) was proposed; for risk assessment and prioritization, for its ease of use, flexibility and board adaptability. The output of this analysis provides visibility about organization's position toward desired performance and underlines crucial risks to be addressed which marks the starting point of the way to performance improvement. A case study was introduced to demonstrate the applicability and relevance of the developed framework.

Efficient low-power accelerators for Convolutional Neural Networks (CNNs) largely benefit from quantization and approximation, which are typically applied layer-wise for efficient hardware implementation. In this work, we present a novel strategy for efficient combination of these concepts at a deeper level, which is at each channel or kernel. We first apply layer-wise, low bit-width, linear quantization and truncation-based approximate multipliers to the CNN computation. Then, based on a state-of-the-art resiliency analysis, we are able to apply a kernel-wise approximation and quantization scheme with negligible accuracy losses, without further retraining. Our proposed strategy is implemented in a specialized framework for fast design space exploration. This optimization leads to a boost in estimated power savings of up to 34% in residual CNN architectures for image classification, compared to the base quantized architecture.

In the security platform of Internet of Things (IoT), a licensed Low Power Wide Area Network (LPWAN) technology, named Narrowband Internet of Things (NB-IoT) is playing a vital role in transferring the information between objects. This technology is preferable for applications having a low data rate. As the number of subscribers increases, attack possibilities raise simultaneously. So securing the transmission between the objects becomes a big task. Bandwidth spoofing is one of the most sensitive attack that can be performed on the communication channel that lies between the access point and user equipment. This research proposal objective is to secure the system from the attack based on Unmanned Aerial vehicles (UAVs) enabled Small Cell Access (SCA) device which acts as an intruder between the user and valid SCA and investigating the scenario when any intruder device comes within the communication range of the NB-IoT enabled device. Here, this article also proposed a mathematical solution for the proposed scenario.

Cyber Threat Intelligence (CTI) sharing platforms are valuable tools in cybersecurity. However, despite the fact that effective CTI exchange highly depends on human aspects, cyber behavior in CTI sharing platforms has been notably less investigated by the security research community.Motivated by this research gap, we ground our work in the concrete challenge of understanding users’ perceptions of information sharing in CTI platforms. To this end, we propose a conceptual workflow and toolchain that would seek to verify whether users have an accurate comprehension of how far information travels when shared in a CTI sharing platform.We contextualize our concept within MISP as a use case, and discuss the benefits of our socio-technical approach as a potential tool for security analysis, simulation, or education/training support. We conclude with a brief outline of future work that would seek to evaluate and validate the proposed model.

With the rapid development of IoT in recent years, IoT is increasingly being used as an endpoint of supply chains. In general, as the majority of data is now being stored and shared over the network, information security is an important issue in terms of secure supply chain management. In response to cyber security breaches and threats, there has been much research and development on the secure storage and transfer of data over the network. However, there is a relatively limited amount of research and proposals for the security of endpoints, such as IoT linked in the supply chain network. In addition, it is difficult to ensure reliability for IoT itself due to a lack of resources such as CPU power and storage. Ensuring the reliability of IoT is essential when IoT is integrated into the supply chain. Thus, in order to secure the supply chain, we need to improve the reliability of IoT, the endpoint of the supply chain. In this work, we examine the use of IoT gateways, client certificates, and IdP as methods to compensate for the lack of IoT resources. The results of our qualitative evaluation demonstrate that using the IdP method is the most effective.

Authorship attribution is the problem of identifying the author of texts based on the author's writing style. It is usually assumed that the writing style contains traits inaccessible to conscious manipulation and can thus be safely used to identify the author of a text. Several style markers have been proposed in the literature, nevertheless, there is still no consensus on which best represent the choices of authors. Here we assume an agnostic viewpoint on the dispute for the best set of features that represents an author's writing style. We rather investigate how different sources of information may unveil different aspects of an author's style, complementing each other to improve the overall process of authorship attribution. For this we model authorship attribution as a multi-view learning task. We assess the effectiveness of our proposal applying it to a set of well-studied corpora. We compare the performance of our proposal to the state-of-the-art approaches for authorship attribution. We thoroughly analyze how the multi-view approach improves on methods that use a single data source. We confirm that our approach improves both in accuracy and consistency of the methods and discuss how these improvements are beneficial for linguists and domain specialists.

Cyber-security training has evolved into an imperative need, aiming to provide cyber-security professionals with the knowledge and skills required to confront cyber-attacks that are increasing in number and sophistication. Training activities are typically associated with evaluation means, aimed to assess the extent to which the trainee has acquired the knowledge and skills whose development is targeted by the training programme, while cyber-security awareness and skill level evaluation means may be used to support additional security-related aspects of organizations. In this paper, we review trainee performance assessment metrics in cyber-security training, aiming to assist designers of cyber-security training activities to identify the most prominent trainee performance assessment means for their training programmes, while additional research directions involving cyber-security training evaluation metrics are also identified.

To ensure a ship’s fully operational status in a wide spectrum of missions, as passenger transportation, international trade, and military activities, numerous interdependent systems are essential. Despite the potential critical consequences of misunderstanding or ignoring those interdependencies, there are very few documented approaches to enable their identification, representation, analysis, and use. From the cybersecurity point of view, if an anomaly occurs on one of the interdependent systems, it could eventually impact the whole ship, jeopardizing its mission success. This paper presents a proposal to identify the main dependencies of layers within and between generic ship’s functional blocks. An analysis of one of these layers, the platform systems, is developed to examine a naval cyber-physical system (CPS), the water management for passenger use, and its associated dependencies, from an intrinsic perspective. This analysis generates a three layers graph, on which dependencies are represented as oriented edges. Each abstraction level of the graph represents the physical, digital, and system variables of the examined CPS. The obtained result confirms the interest of graphs for dependencies representation and analysis. It is an operational depiction of the different systems interdependencies, on which can rely a cybersecurity evaluation, like anomaly detection and propagation assessment.

One of the topics that have successful applications in engineering technologies and computer science is chaos theory. The remarkable area among these successful applications has been especially the subject of chaos-based cryptology. Many practical applications have been proposed in a wide spectrum from image encryption algorithms to random number generators, from block encryption algorithms to hash functions based on chaotic systems. Logistics map is one of the chaotic systems that has been the focus of attention of researchers in these applications. Since, Logistic map can be shown as the most widely used chaotic system in chaos-based cryptology studies due to its simple mathematical structure and its characterization as a strong entropy source. However, in some studies, researchers stated that the behavior displayed in relation to the dynamics of the Logistic map may pose a problem for cryptology applications. For this reason, alternative studies have been carried out using different chaotic systems. In this study, it has been investigated which one is more suitable for cryptographic applications for five different derivatives of the Logistic map. In the study, a substitution box generator program has been implemented using the Logistic map and its five different derivatives. The generated outputs have been tested for five basic substitution box design criteria. Analysis results showed that the proposals for maps derived from Logistic map have a more robust structure than many studies in the literature.

X-ray baggage security screening is a demanding task for aviation and rail transit security; automatic prohibited item detection in X-ray baggage images can help reduce the work of inspectors. However, as many items are placed too close to each other in the baggages, it is difficult to fully trust the detection results of intelligent prohibited item detection algorithms. In this paper, a human-in-the-loop baggage inspection framework is proposed. The proposed framework utilizes the deep-learning-based algorithm for prohibited item detection to find suspicious items in X-ray baggage images, and select manual examination when the detection algorithm cannot determine whether the baggage is dangerous or safe. The advantages of proposed inspection process include: online to capture new sample images for training incrementally prohibited item detection model, and augmented prohibited item detection intelligence with human-computer collaboration. The preliminary experimental results show, human-in-the-loop process by combining cognitive capabilities of human inspector with the intelligent algorithms capabilities, can greatly improve the efficiency of in-baggage security screening.

The interdisciplinary field of immersive learning research is scattered. Combining efforts for better exploration of this field from the different disciplines requires researchers to communicate and coordinate effectively. We call upon the community of immersive learning researchers for planting the Knowledge Tree of Immersive Learning Research, a proposal for a systematization effort for this field, combining both scholarly and practical knowledge, cultivating a robust and ever-growing knowledge base and methodological toolbox for immersive learning. This endeavor aims at promoting evidence-informed practice and guiding future research in the field. This paper contributes with the rationale for three objectives: 1) Developing common scientific terminology amidst the community of researchers; 2) Cultivating a common understanding of methodology, and 3) Advancing common use of theoretical approaches, frameworks, and models.

Modern embedded IoT devices are an attractive target for cyber attacks. For example, they can be used to disable entire factories and ask for ransom. Recovery of compromised devices is not an easy task, because malware can subvert the original software and make itself persistent. In addition, many embedded devices do not implement remote recovery procedures and, therefore, require manual intervention.Recent proposals from NIST and TCG define concepts and building blocks for cyber resilience: protection, detection and recovery. In this paper, we describe a system which allows implementing cyber resilient IoT devices that can be recovered remotely and timely. The proposed architecture consists of trusted data monitoring, local and remote attack detection, and enforced connections to remote services as building blocks for attack detection and recovery. Further, hardware- and software-based implementations of such a system are presented.

The EU goal of achieving carbon neutrality by 2050 will require profound changes in the electricity supply chain. In this context, Distribution System Operators (DSOs) are expected to adopt solutions to efficiently integrate distributed energy resources (DER), including the implementation of local flexibility mechanisms. Thus, DSOs would procure services from DER like distributed generation, demand response, or storage to support grid expansion, attain significant cost savings, and swifter DER integration. However, the use of flexibility mechanisms still faces barriers posed by national regulation. Regulatory sandboxes may be used to overcome this gap by enabling and supporting the development of local flexibility mechanisms. This paper performs an international review of four leading countries in the use of sandbox and flexibility, identifies best practices, and, based on the lessons learned, provides recommendations to implement local flexibility mechanisms for DSOs in Spain under regulatory sandboxes