Biblio

Along with the development of the Windows operating system, browser applications to surf the internet are also growing rapidly. The most widely used browsers today are Google Chrome and Mozilla Firefox. Both browsers have a username and password management feature that makes users login to a website easily, but saving usernames and passwords in the browser is quite dangerous because the stored data can be hacked using brute force attacks or read through a program. One way to get a username and password in the browser is to use a program that can read Google Chrome and Mozilla Firefox login data from the computer's internal storage and then show those data. In this study, an attack will be carried out by implementing Rubber Ducky using BadUSB to run the ChromePass and PasswordFox program and the PowerShell script using the Arduino Pro Micro Leonardo device as a USB Password Stealer. The results obtained from this study are the username and password on Google Chrome and Mozilla Firefox successfully obtained when the USB is connected to the target device, the average time of the attack is 14 seconds then sending it to the author's email.

Malware is any software that causes harm to the user information, computer systems or network. Modern computing and internet systems are facing increase in malware threats from the internet. It is observed that different malware follows the same patterns in their structure with minimal alterations. The type of threats has evolved, from file-based malware to fileless malware, such kind of threats are also known as Advance Volatile Threat (AVT). Fileless malware is complex and evasive, exploiting pre-installed trusted programs to infiltrate information with its malicious intent. Fileless malware is designed to run in system memory with a very small footprint, leaving no artifacts on physical hard drives. Traditional antivirus signatures and heuristic analysis are unable to detect this kind of malware due to its sophisticated and evasive nature. This paper provides information relating to detection, mitigation and analysis for such kind of threat.

Computer virus detection technology is an important basic security technology in the information age. The current detection technology has a high success rate for the detection of known viruses and known virus infection technologies, but the development of detection technology often lags behind the development of computer virus infection technology. Under Windows system, there are many kinds of file viruses, which change rapidly, and pose a continuous security threat to users. The research of new file virus infection technology can provide help for the development of virus detection technology. In this paper, a new virus infection technology based on dynamic binary analysis is proposed to execute file virus infection. Using the new virus infection technology, the infected executable file can be detected in the experimental environment. At the same time, this paper discusses the detection method of new virus infection technology. We hope to provide help for the development of virus detection technology from the perspective of virus design.

The relevance of data protection is related to the intensive informatization of various aspects of society and the need to prevent unauthorized access to them. World spending on ensuring information security (IS) for the current state: expenses in the field of IS today amount to \$81.7 billion. Expenditure forecast by 2020: about \$105 billion [1]. Information protection of military facilities is the most critical in the public sector, in the non-state - financial organizations is one of the leaders in spending on information protection. An example of the importance of IS research is the Trojan encoder WannaCry, which infected hundreds of thousands of computers around the world, attacks are recorded in more than 116 countries. The attack of the encoder of WannaCry (Wana Decryptor) happens through a vulnerability in service Server Message Block (protocol of network access to file systems) of Windows OS. Then, a rootkit (a set of malware) was installed on the infected system, using which the attackers launched an encryption program. Then each vulnerable computer could become infected with another infected device within one local network. Due to these attacks, about \$70,000 was lost (according to data from 18.05.2017) [2]. It is assumed in the presented work, that the software level of information protection is fundamentally insufficient to ensure the stable functioning of critical objects. This is due to the possible hardware implementation of undocumented instructions, discussed later. The complexity of computing systems and the degree of integration of their components are constantly growing. Therefore, monitoring the operation of the computer hardware is necessary to achieve the maximum degree of protection, in particular, data processing methods.

Nowadays, Windows is an operating system that is very popular among people, especially users who have limited knowledge of computers. But unconsciously, the security threat to the windows operating system is very high. Security threats can be in the form of illegal exploitation of the system. The most common attack is using malware. To determine the characteristics of malware using dynamic analysis techniques and static analysis is very dependent on the availability of malware samples. Honeypot is the most effective malware collection technique. But honeypot cannot determine the type of file format contained in malware. File format information is needed for the purpose of handling malware analysis that is focused on windows-based malware. For this reason, we propose a framework that can collect malware information as well as identify malware PE file type formats. In this study, we collected malware samples using a modern honey network. Next, we performed a feature extraction to determine the PE file format. Then, we classify types of malware using VirusTotal scanning. As the results of this study, we managed to get 1.222 malware samples. Out of 1.222 malware samples, we successfully extracted 945 PE malware. This study can help researchers in other research fields, such as machine learning and deep learning, for malware detection.

File timestamps do not receive much attention from information security specialists and computer forensic scientists. It is believed that timestamps are extremely easy to fake, and the system time of a computer can be changed. However, operating system for synchronizing processes and working with file objects needs accurate time readings. The authors estimate that several million timestamps can be stored on the logical partition of a hard disk with the NTFS. The MFT stores four timestamps for each file object in \$STANDARDİNFORMATION and \$FILE\_NAME attributes. Furthermore, each directory in the İNDEX\_ROOT or İNDEX\_ALLOCATION attributes contains four more timestamps for each file within it. File timestamps are set and changed as a result of file operations. At the same time, some file operations differently affect changes in timestamps. This article presents the results of the tool-based observation over the creation and update of timestamps in the MFT resulting from the basic file operations. Analysis of the results is of interest with regard to computer forensic science.

The use of a very wide windows operating system is undeniably also followed by increasing attacks on the operating system. Universal Serial Bus (USB) is one of the mechanisms used by many people with plug and play functionality that is very easy to use, making data transfers fast and easy compared to other hardware. Some research shows that the Windows operating system has weaknesses so that it is often exploited by using various attacks and malware. There are various methods used to exploit the Windows operating system, one of them by using a USB device. By using a USB device, a criminal can plant a backdoor reverse shell to exploit the victim's computer just by connecting the USB device to the victim's computer without being noticed. This research was conducted by planting a reverse shell backdoor through a USB device to exploit the victim's device, especially the webcam and microphone device on the target computer. From 35 experiments that have been carried out, it was found that 83% of spying attacks using USB devices on the Windows operating system were successfully carried out.

Existing cyber security solutions have been basically developed using knowledge-based models that often cannot trigger new cyber-attack families. With the boom of Artificial Intelligence (AI), especially Deep Learning (DL) algorithms, those security solutions have been plugged-in with AI models to discover, trace, mitigate or respond to incidents of new security events. The algorithms demand a large number of heterogeneous data sources to train and validate new security systems. This paper presents the description of new datasets, the so-called ToNİoT, which involve federated data sources collected from Telemetry datasets of IoT services, Operating system datasets of Windows and Linux, and datasets of Network traffic. The paper introduces the testbed and description of TONİoT datasets for Windows operating systems. The testbed was implemented in three layers: edge, fog and cloud. The edge layer involves IoT and network devices, the fog layer contains virtual machines and gateways, and the cloud layer involves cloud services, such as data analytics, linked to the other two layers. These layers were dynamically managed using the platforms of software-Defined Network (SDN) and Network-Function Virtualization (NFV) using the VMware NSX and vCloud NFV platform. The Windows datasets were collected from audit traces of memories, processors, networks, processes and hard disks. The datasets would be used to evaluate various AI-based cyber security solutions, including intrusion detection, threat intelligence and hunting, privacy preservation and digital forensics. This is because the datasets have a wide range of recent normal and attack features and observations, as well as authentic ground truth events. The datasets can be publicly accessed from this link [1].

Windows is one of the popular operating systems in use today, while Universal Serial Bus (USB) is one of the mechanisms used by many people with practical plug and play functions. USB has long been used as a vector of attacks on computers. One method of attack is Keylogger. The Keylogger can take advantage of existing vulnerabilities in the Windows 10 operating system attacks carried out in the form of recording computer keystroke activity without the victim knowing. In this research, an attack will be carried out by running a Powershell Script using BadUSB to be able to activate the Keylogger program. The script is embedded in the Arduino Pro Micro device. The results obtained in the Keyboard Injection Attack research using Arduino Pro Micro were successfully carried out with an average time needed to run the keylogger is 7.474 seconds with a computer connected to the internet. The results of the keylogger will be sent to the attacker via email.

In the paper, an intrusion detection system to safeguard computer software is proposed. The detection is based on negative selection algorithm, inspired by the human immunity mechanism. It is composed of two stages, generation of receptors and anomaly detection. Experimental results of the proposed system are presented, analyzed, and concluded.

The purpose of this work is to implement a universal system for collecting and analyzing event logs from sources that use the Windows operating system. The authors use event-forwarding technology to collect data from logs. Security information and event management detects incidents from received events. The authors analyze existing methods for transmitting event log entries from sources running the Windows operating system. This article describes in detail how to connect event sources running on the Windows operating system to the event collector without connecting to a domain controller. Event sources are authenticated using certificates created by the event collector. The authors suggest a scheme for connecting the event collector to security information and event management. Security information and event management must meet the requirements for use in conjunction with event forwarding technology. The authors of the article demonstrate the scheme of the test stand and the result of testing the event forwarding technology.

The need for data exchange and storage is currently increasing. The increased need for data exchange and storage also increases the need for data exchange devices and media. One of the most commonly used media exchanges and data storage is the USB Flash Drive. USB Flash Drive are widely used because they are easy to carry and have a fairly large storage. Unfortunately, this increased need is not directly proportional to an increase in awareness of device security, both for USB flash drive devices and computer devices that are used as primary storage devices. This research shows the threats that can arise from the use of USB Flash Drive devices. The threat that is used in this research is the fork bomb implemented on an Arduino Pro Micro device that is converted to a USB Flash drive. The purpose of the Fork Bomb is to damage the memory performance of the affected devices. As a result, memory performance to execute the process will slow down. The use of a USB Flash drive as an attack vector with the fork bomb method causes users to not be able to access the operating system that was attacked. The results obtained indicate that the USB Flash Drive can be used as a medium of Fork Bomb attack on the Windows operating system.

Confidentiality, authentication, privacy and integrity are the pillars of securing data. The most generic way of providing security is setting up passwords and usernames collectively known as login credentials. Operating systems use different techniques to ensure security of login credentials yet brute force attacks and dictionary attacks along with various other types which leads to success in passing or cracking passwords.The objective of proposed HS model is to enhance the protection of SAM file used by Windows Registry so that the system is preserved from intruders.

This is very true for the Windows operating system (OS) used by government and private organizations. With Windows, the closed source nature of the operating system has unfortunately meant that hidden security issues are discovered very late and the fixes are not found in real time. There needs to be a reexamination of current static methods of malware detection. This paper presents an integrated system for automated and real-time monitoring and prediction of rootkit and malware threats for the Windows OS. We propose to host the target Windows machines on the widely used Xen hypervisor, and collect process behavior using virtual memory introspection (VMI). The collected data will be analyzed using state of the art machine learning techniques to quickly isolate malicious process behavior and alert system administrators about potential cyber breaches. This research has two focus areas: identifying memory data structures and developing prediction tools to detect malware. The first part of research focuses on identifying memory data structures affected by malware. This includes extracting the kernel data structures with VMI that are frequently targeted by rootkits/malware. The second part of the research will involve development of a prediction tool using machine learning techniques.

Rootkits detecting in the Windows operating system is an important part of information security monitoring and audit system. Methods of hided process detection were analyzed. The software is developed which implements the four methods of hidden process detection in a user mode (PID based method, the descriptor based method, system call based method, opened windows based method) to use in the monitoring and audit systems.

Because the Internet makes human lives easier, many devices are connected to the Internet daily. The private data of individuals and large companies, including health-related data, user bank accounts, and military and manufacturing data, are increasingly accessible via the Internet. Because almost all data is now accessible through the Internet, protecting these valuable assets has become a major concern. The goal of cyber security is to protect such assets from unauthorized use. Attackers use automated tools and manual techniques to penetrate systems by exploiting existing vulnerabilities and software bugs. To provide good enough security; attack methodologies, vulnerability concepts and defence strategies should be thoroughly investigated. The main purpose of this study is to show that the patches released for existing vulnerabilities at the operating system (OS) level and in software programs does not completely prevent cyber-attack. Instead, producing specific patches for each company and fixing software bugs by being aware of the software running on each specific system can provide a better result. This study also demonstrates that firewalls, antivirus software, Windows Defender and other prevention techniques are not sufficient to prevent attacks. Instead, this study examines different aspects of penetration testing to determine vulnerable applications and hosts using the Nmap and Metasploit frameworks. For a test case, a virtualized system is used that includes different versions of Windows and Linux OS.

Organizations face the issue of how to best allocate their security resources. Thus, they need an accurate method for assessing how many new vulnerabilities will be reported for the operating systems (OSs) they use in a given time period. Our approach consists of clustering vulnerabilities by leveraging the text information within vulnerability records, and then simulating the mean value function of vulnerabilities by relaxing the monotonic intensity function assumption, which is prevalent among the studies that use software reliability models (SRMs) and nonhomogeneous Poisson process (NHPP) in modeling. We applied our approach to the vulnerabilities of four OSs: Windows, Mac, IOS, and Linux. For the OSs analyzed in terms of curve fitting and prediction capability, our results, compared to a power-law model without clustering issued from a family of SRMs, are more accurate in all cases we analyzed.

The advancement in technology has changed how people work and what software and hardware people use. From conventional personal computer to GPU, hardware technology and capability have dramatically improved so does the operating systems that come along. Unfortunately, current industry practice to compare OS is performed with single perspective. It is either benchmark the hardware level performance or performs penetration testing to check the security features of an OS. This rigid method of benchmarking does not really reflect the true performance of an OS as the performance analysis is not comprehensive and conclusive. To illustrate this deficiency, the study performed hardware level and operational level benchmarking on Windows XP, Windows 7 and Windows 8 and the results indicate that there are instances where Windows XP excels over its newer counterparts. Overall, the research shows Windows 8 is a superior OS in comparison to its predecessors running on the same hardware. Furthermore, the findings also show that the automated benchmarking tools are proved less efficient benchmark systems that run on Windows XP and older OS as they do not support DirectX 11 and other advanced features that the hardware supports. There lies the need to have a unified benchmarking approach to compare other aspects of OS such as user oriented tasks and security parameters to provide a complete comparison. Therefore, this paper is proposing a unified approach for Operating System (OS) comparisons with the help of a Windows OS case study. This unified approach includes comparison of OS from three aspects which are; hardware level, operational level performance and security tests.

Due to the increasing threat of network attacks, Firewall has become crucial elements in network security, and have been widely deployed in most businesses and institutions for securing private networks. The function of a firewall is to examine each packet that passes through it and decide whether to letting them pass or halting them based on preconfigured rules and policies, so firewall now is the first defense line against cyber attacks. However most of people doesn't know how firewall works, and the most users of windows operating system doesn't know how to use the windows embedded firewall. This paper explains how firewall works, firewalls types, and all you need to know about firewall policies, then presents a novel application (QudsWall) developed by authors that manages windows embedded firewall and make it easy to use.

VisorFlow aims to monitor the flow of information between processes without requiring modifications to the operating system kernel or its userspace. VisorFlow runs in a privileged Xen domain and monitors the system calls executing in other domains running either Linux or Windows. VisorFlow uses its observations to prevent confidential information from leaving a local network. We describe the design and implementation of VisorFlow, describe how we used VisorFlow to confine na\"ıve users and malicious insiders during the 2017 Cyber-Defense Exercise, and provide performance measurements. We have released VisorFlow and its companion library, libguestrace, as open-source software.

Lehigh University has set a goal to implement System Center Configuration Manager by the end of 2017. This project is being spearheaded by one of our Senior Computing Consultants who has been researching and trained in the Microsoft Virtualization stack. We will discuss our roadmaps, results from our proof-of-concept environments, and discussions in driving this project.

In Distributed Denial of Service (DDoS) attacks, an attacker tries to disable a service with a flood of seemingly legitimate requests from multiple devices; this is usually accompanied by a sharp spike in the number of distinct IP addresses / flows accessing the system in a short time frame. Hence, the number of distinct elements over sliding windows is a fundamental signal in DDoS identification. Additionally, assessing whether a specific flow has recently accessed the system, known as the Set Membership problem, can help us identify the attacking parties. Here, we show how to extend the functionality of a state of the art algorithm for set membership over a W elements sliding window. We now also support estimation of the distinct flow count, using as little as log2 (W) additional bits.

Digitally signed malware can bypass system protection mechanisms that install or launch only programs with valid signatures. It can also evade anti-virus programs, which often forego scanning signed binaries. Known from advanced threats such as Stuxnet and Flame, this type of abuse has not been measured systematically in the broader malware landscape. In particular, the methods, effectiveness window, and security implications of code-signing PKI abuse are not well understood. We propose a threat model that highlights three types of weaknesses in the code-signing PKI. We overcome challenges specific to code-signing measurements by introducing techniques for prioritizing the collection of code signing certificates that are likely abusive. We also introduce an algorithm for distinguishing among different types of threats. These techniques allow us to study threats that breach the trust encoded in the Windows code signing PKI. The threats include stealing the private keys associated with benign certificates and using them to sign malware or by impersonating legitimate companies that do not develop software and, hence, do not own code-signing certificates. Finally, we discuss the actionable implications of our findings and propose concrete steps for improving the security of the code-signing ecosystem.

According to the 2016 Internet Security Threat Report by Symantec, there are around 431 million variants of malware known. This effort focuses on malware used for spying on user's activities, remotely controlling devices, and identity and credential theft within a Windows based operating system. As Windows operating systems create and maintain a log of all events that are encountered, various malware are tested on virtual machines to determine what events they trigger in the Windows logs. The observations are compiled into Operating System specific lookup tables that can then be used to find the tested malware on other computers with the same Operating System.