Biblio

Physical Unclonable Functions (PUFs) are the secured hardware primitives to authenticate Integrated Circuits (ICs) from various unauthorized attacks. The secured key generation mechanism through PUFs is based on random Process Variations (PVs) inherited by the CMOS transistors. In this paper, we proposed a chaotic-based challenge generation mechanism to feed the arbiter PUFs. The chaotic property is introduced to increase the non-linearity in the arbitration mechanism thereby the uncertainty of the keys is attained. The chaotic sequences are easy to generate, difficult to intercept, and have the additional advantage of being in a large number Challenge-Response Pair (CRP) generation. The proposed design has a significant advantage in key generation with improved uniqueness and diffuseness of 47.33%, and 50.02% respectively. Moreover, the enhancement in the reliability of 96.14% and 95.13% range from −40C to 125C with 10% fluctuations in supply voltage states that it has prominent security assistance to the Internet of Things (IoT) enabled devices against malicious attacks.

Nowadays due to economic reasons most of the semiconductor companies prefer to outsource the manufacturing part of their designs to third fabrication foundries, the so-called fabs. Untrustworthy fabs can extract circuit blocks, the called intellectual properties (IPs), from the layouts and then pirate them. Such fabs are suspected of hardware Trojan (HT) threat in which malicious circuits are added to the layouts for sabotage objectives. HTs lead up to increase power consumption in HT-infected circuits. However, due to process variations, the power of HTs including few gates in million-gate circuits is not detectable in power consumption analysis (PCA). Thus, such circuits should be considered as a collection of small sub-circuits, and PCA must be individually performed for each one of them. In this article, we introduce an approach facilitating PCA-based HT detection methods. Concerning this approach, we propose a new logic locking method and algorithm. Logic locking methods and algorithm are usually employed against IP piracy. They modify circuits such that they do not correctly work without applying a correct key to. Our experiments at the gate level and post-synthesis show that the proposed locking method and algorithm increase the proportion of HT activity and consequently HT power to circuit power.

Photonic networks-on-chip (PNoCs) enable high bandwidth on-chip data transfers by using photonic waveguides capable of dense-wave-length-division-multiplexing (DWDM) for signal traversal and microring resonators (MRs) for signal modulation. A Hardware Trojan in a PNoC can manipulate the electrical driving circuit of its MRs to cause the MRs to snoop data from the neighboring wavelength channels in a shared photonic waveguide. This introduces a serious security threat. This paper presents a novel framework called SOTERIA† that utilizes process variation based authentication signatures along with architecture-level enhancements to protect data in PNoC architectures from snooping attacks. Evaluation results indicate that our approach can significantly enhance the hardware security in DWDM-based PNoCs with minimal overheads of up to 10.6% in average latency and of up to 13.3% in energy-delay-product (EDP).

Similar to digital circuits, analog and mixed-signal (AMS) circuits are also susceptible to supply-chain attacks such as piracy, overproduction, and Trojan insertion. However, unlike digital circuits, supply-chain security of AMS circuits is less explored. In this work, we propose to perform "logic locking" on digital section of the AMS circuits. The idea is to make the analog design intentionally suffer from the effects of process variations, which impede the operation of the circuit. Only on applying the correct key, the effect of process variations are mitigated, and the analog circuit performs as desired. We provide the theoretical guarantees of the security of the circuit, and along with simulation results for the band-pass filter, low-noise amplifier, and low-dropout regulator, we also show experimental results of our technique on a band-pass filter.

Hardware Trojan (HT) detection methods based on the side channel analysis deeply suffer from the process variations. In order to suppress the effect of the variations, we devise a method that smartly selects two highly correlated paths for each interconnect (edge) that is suspected to have an HT on it. First path is the shortest one passing through the suspected edge and the second one is a path that is highly correlated with the first one. Delay ratio of these paths avails the detection of the HT inserted circuits. Test results reveal that the method enables the detection of even the minimally invasive Trojans in spite of both inter and intra die variations with the spatial correlations.

High detection sensitivity in the presence of process variation is a key challenge for hardware Trojan detection through side channel analysis. In this work, we present an efficient Trojan detection approach in the presence of elevated process variations. The detection sensitivity is sharpened by 1) comparing power levels from neighboring regions within the same chip so that the two measured values exhibit a common trend in terms of process variation, and 2) generating test patterns that toggle each cell multiple times to increase Trojan activation probability. Detection sensitivity is analyzed and its effectiveness demonstrated by means of RPD (relative power difference). We evaluate our approach on ISCAS'89 and ITC'99 benchmarks and the AES-128 circuit for both combinational and sequential type Trojans. High detection sensitivity is demonstrated by analysis on RPD under a variety of process variation levels and experiments for Trojan inserted circuits.