Biblio

The advancement in technologies like IoT, device-to-device communication lead to concepts like smart home and smart cities, etc. In smart home architecture, different devices such as home appliances, personal computers, surveillance cameras, etc. are connected to the Internet and enable the user to monitor and control irrespective of time and location. IPv6-enabled 6LoWPAN is a low-power, low-range communication protocol designed and developed for the short-range IoT applications. 6LoWPAN is based on IEEE 802.15.4 protocol and IPv6 network protocol for low range wireless applications. Although 6LoWPAN supports different routing protocols, RPL is the widely used routing protocol for low power and lossy networks. In this work, we have taken an IoT enabled smart home environment, in which 6LoWPAN is used as a communication and RPL as a routing protocol. The performance of this proposed network model is analyzed based on the different performance metrics such as latency, PDR, and throughput. The proposed model is simulated using Cooja simulator running over the Contiki OS. Along with the Cooja simulator, the network analyzer tool Wireshark is used to analyze the network behaviors.

Significant developments have taken place over the past few years in the area of vehicular communication systems in the ITS environment. It is vital that, in these environments, security is considered in design and implementation since compromised vulnerabilities in one vehicle can be propagated to other vehicles, especially given that V2X communication is through an ad-hoc type network. Recently, many standardisation organisations have been working on creating international standards related to vehicular communication security and the so-called Internet of Vehicles (IoV). This paper presents a discussion of current V2X communications cyber security issues and standardisation approaches being considered by standardisation bodies such as the ISO, the ITU, the IEEE, and the ETSI.

Quantum computing is posing new threats on our security infrastructure. This has triggered a new research field on quantum-safe methods, and those that rely on the application of quantum principles are commonly referred as quantum cryptography. The most mature development in the field of quantum cryptography is called Quantum Key Distribution (QKD). QKD is a key exchange primitive that can replace existing mechanisms that can become obsolete in the near future. Although QKD has reached a high level of maturity, there is still a long path for a mass market implementation. QKD shall overcome issues such as miniaturization, network integration and the reduction of production costs to make the technology affordable. In this direction, we foresee that QKD systems will evolve following the same path as other networking technologies, where systems will run on specific network cards, integrable in commodity chassis. This work describes part of our activity in the EU H2020 project CiViQ in which quantum technologies, as QKD systems or quantum random number generators (QRNG), will become a single network element that we define as Quantum Switch. This allows for quantum resources (keys or random numbers) to be provided as a service, while the different components are integrated to cooperate for providing the most random and secure bit streams. Furthermore, with the purpose of making our proposal closer to current networking technology, this work also proposes an abstraction logic for making our Quantum Switch suitable to become part of software-defined networking (SDN) architectures. The model fits in the architecture of the SDN quantum node architecture, that is being under standardization by the European Telecommunications Standards Institute. It permits to operate an entire quantum network using a logically centralized SDN controller, and quantum switches to generate and to forward key material and random numbers across the entire network. This scheme, demonstrated for the first time at the Madrid Quantum Network, will allow for a faster and seamless integration of quantum technologies in the telecommunications infrastructure.

Internet of Things (IoT) devices industry is rapidly growing, with an accelerated increase in the list of manufacturers offering a wide range of smart devices selected to enhance end-users' standard of living. Security remains an after-thought in these devices resulting in vulnerabilities. While there exists a cryptographic protocol designed to solve such authentication problem, the computational complexity of cryptographic protocols and scalability problems make almost all cryptography-based authentication protocols impractical for IoT. Wireless RFF (Radio Frequency Fingerprinting) comes as a physical layer-based security authentication method that improves wireless security authentication, which is especially useful for the power and computing limited devices. As a proof-of-concept, this paper proposes a universal SDR (software defined Radio)-based inexpensive implementation intended to sense emitted wireless signals from IoT devices. Our approach is validated by extracting mobile phone signal bursts under different user-dedicated modes. The proposed setup is well adapted to accurately capture signals from different telecommunication standards. To ensure a unique identification of IoT devices, this paper also provides an optimum set of features useful to generate the device identity fingerprint.

Security in mobile handsets of telecommunication standards such as GSM, Project 25 and TETRA is very important, especially when governments and military forces use handsets and telecommunication devices. Although telecommunication could be quite secure by using encryption, coding, tunneling and exclusive channel, attackers create new ways to bypass them without the knowledge of the legitimate user. In this paper we introduce a new, simple and economical circuit to warn the user in cases where the message is not encrypted because of manipulation by attackers or accidental damage. This circuit not only consumes very low power but also is created to sustain telecommunication devices in aspect of security and using friendly. Warning to user causes the best practices of telecommunication devices without wasting time and energy for fault detection.

Communicating vehicles will change road traffic as we know it. With current versions of European and US standards in mind, the authors discuss privacy and traffic surveillance issues in vehicular network technology and outline research directions that could address these issues.

Practical intrusion detection in Wireless Multihop Networks (WMNs) is a hard challenge. The distributed nature of the network makes centralized intrusion detection difficult, while resource constraints of the nodes and the characteristics of the wireless medium often render decentralized, node-based approaches impractical. We demonstrate that an active-probing-based network intrusion detection system (AP-NIDS) is practical for WMNs. The key contribution of this paper is to optimize the active probing process: we introduce a general Bayesian model and design a probe selection algorithm that reduces the number of probes while maximizing the insights gathered by the AP-NIDS. We validate our model by means of testbed experimentation. We integrate it to our open source AP-NIDS DogoIDS and run it in an indoor wireless mesh testbed utilizing the IEEE 802.11s protocol. For the example of a selective packet dropping attack, we develop the detection states for our Bayes model, and show its feasibility. We demonstrate that our approach does not need to execute the complete set of probes, yet we obtain good detection rates.

We survey the state-of-the-art on the Internet-of-Things (IoT) from a wireless communications point of view, as a result of the European FP7 project BUTLER which has its focus on pervasiveness, context-awareness and security for IoT. In particular, we describe the efforts to develop so-called (wireless) enabling technologies, aimed at circumventing the many challenges involved in extending the current set of domains (“verticals”) of IoT applications towards a “horizontal” (i.e. integrated) vision of the IoT. We start by illustrating current research effort in machine-to-machine (M2M), which is mainly focused on vertical domains, and we discuss some of them in details, depicting then the necessary horizontal vision for the future intelligent daily routine (“Smart Life”). We then describe the technical features of the most relevant heterogeneous communications technologies on which the IoT relies, under the light of the on-going M2M service layer standardization. Finally we identify and present the key aspects, within three major cross-vertical categories, under which M2M technologies can function as enablers for the horizontal vision of the IoT.