Biblio

Nowadays, smart cities (SCs) use technologies and different types of data collected to improve the lifestyles of their citizens. Indeed, connected smart vehicles are technologies used for an SC’s intelligent traffic monitoring systems (ITMSs). However, most proposed monitoring approaches do not consider realtime monitoring. This paper presents real-time data processing for an intelligent traffic monitoring dashboard using the Hadoop ecosystem dashboard components. Many data are available due to our proposed monitoring approach, such as the total number of vehicles on different routes and data on trucks within a radius (10KM) of a specific point given. Based on our generated data, we can make real-time decisions to improve circulation and optimize traffic flow.

Intelligent connected vehicle platoon technology can reduce traffic congestion and vehicle fuel. However, attacks on the data transmitted by the platoon are one of the primary challenges encountered by the platoon during its travels. The false data injection (FDI) attack can lead to road congestion and even vehicle collisions, which can impact the platoon. However, the complexity of the cellular - vehicle to everything (C-V2X) environment, the single source of the message and the poor data processing capability of the on board unit (OBU) make the traditional detection methods’ success rate and response time poor. This study proposes a platoon state information fusion method using the communication characteristics of the platoon in C-V2X and proposes a novel platoon intrusion detection model based on this fusion method combined with sequential importance sampling (SIS). The SIS is a measured strategy of Monte Carlo integration sampling. Specifically, the method takes the status information of the platoon members as the predicted value input. It uses the leader vehicle status information as the posterior probability of the observed value to the current moment of the platoon members. The posterior probabilities of the platoon members and the weights of the platoon members at the last moment are used as input to update the weights of the platoon members at the current moment and obtain the desired platoon status information at the present moment. Moreover, it compares the status information of the platoon members with the desired status information to detect attacks on the platoon. Finally, the effectiveness of the method is demonstrated by simulation.

The paper considers the important problem of information protection in complex energy systems. The expert assessment of information protection in complex energy systems method has been developed. Based on the conducted research and data processing, a method of forming the analytical basis for decision-making aimed at ensuring the competitiveness of complex information protection systems has been developed.

Any Big Data scenario eventually reaches scalability concerns for several factors, often storage or computing power related. Modern solutions have been proven to be effective in multiple domains and have automated many aspects of the Big Data pipeline. In this paper, we aim to present a solution for deploying event-based automated data processing tools for low code environments that aim to minimize the need for user input and can effectively handle common data processing jobs, as an alternative to distributed solutions which require language specific libraries and code. Our architecture uses a combination of a network exposed service with a cluster of “Data Workers” that handle data processing jobs effectively without requiring manual input from the user. This system proves to be effective at handling most data processing scenarios and allows for easy expandability by following simple patterns when declaring any additional jobs.

The Internet has evolved to the point that gigabytes and even terabytes of data are generated and processed on a daily basis. Such a stream of data is characterised by high volume, velocity and variety and is referred to as Big Data. Traditional data processing tools can no longer be used to process big data, because they were not designed to handle such a massive amount of data. This problem concerns also cyber security, where tools like intrusion detection systems employ classification algorithms to analyse the network traffic. Achieving a high accuracy attack detection becomes harder when the amount of data increases and the algorithms must be efficient enough to keep up with the throughput of a huge data stream. Due to the challenges posed by a big data environment, some monitoring systems have already shifted from deep packet inspection to flow-level inspection. The goal of this paper is to evaluate the applicability of an existing intrusion detection technique that performs deep packet inspection in a big data setting. We have conducted several experiments with Apache Spark to assess the performance of the technique when classifying anomalous packets, showing that it benefits from the use of Spark.

Functional dependencies (FDs) are widely applied in data management tasks. Since FDs on data are usually unknown, FD discovery techniques are studied for automatically finding hidden FDs from data. In this paper, we develop techniques to dynamically discover FDs in response to changes on data. Formally, given the complete set Σ of minimal and valid FDs on a relational instance r, we aim to find the complete set Σ$^\textrm\textbackslashprime$ of minimal and valid FDs on røplus\textbackslashDelta r, where \textbackslashDelta r is a set of tuple insertions and deletions. Different from the batch approaches that compute Σ$^\textrm\textbackslashprime$ on røplus\textbackslashDelta r from scratch, our dynamic method computes Σ$^\textrm\textbackslashprime$ in response to \textbackslashtriangle\textbackslashuparrow. by leveraging the known Σ on r, and avoids processing the whole of r for each update from \textbackslashDelta r. We tackle dynamic FD discovery on røplus\textbackslashDelta r by dynamic hitting set enumeration on the difference-set of røplus\textbackslashDelta r. Specifically, (1) leveraging auxiliary structures built on r, we first present an efficient algorithm to update the difference-set of r to that of røplus\textbackslashDelta r. (2) We then compute Σ$^\textrm\textbackslashprime$, by recasting dynamic FD discovery as dynamic hitting set enumeration on the difference-set of røplus\textbackslashDelta r and developing novel techniques for dynamic hitting set enumeration. (3) We finally experimentally verify the effectiveness and efficiency of our approaches, using real-life and synthetic data. The results show that our dynamic FD discovery method outperforms the batch counterparts on most tested data, even when \textbackslashDelta r is up to 30 % of r.

Large capacity, fast-paced, diversified and high-value data are becoming a hotbed of data processing and research. Privacy security protection based on data life cycle is a method to protect privacy. It is used to protect the confidentiality, integrity and availability of personal data and prevent unauthorized access or use. The main advantage of using this method is that it can fully control all aspects related to the information system and its users. With the opening of the cloud, attackers use the cloud to recalculate and analyze big data that may infringe on others' privacy. Privacy protection based on data life cycle is a means of privacy protection based on the whole process of data production, collection, storage and use. This approach involves all stages from the creation of personal information by individuals (e.g. by filling out forms online or at work) to destruction after use for the intended purpose (e.g. deleting records). Privacy security based on the data life cycle ensures that any personal information collected is used only for the purpose of initial collection and destroyed as soon as possible.

A unified cloud management platform is the key to efficient and secure management of cloud computing resources. To improve the operation effect of the power cloud service platform, power companies can use the micro-service architecture technology to carry out data processing, information integration, and innovative functional architecture of the power cloud service platform, realize the optimal design of the power cloud service platform and improve the power cloud service platform-security service quality. According to the technical requirements of the power cloud security management platform, this paper designs the technical architecture of the power unified cloud security management platform and expounds on the functional characteristics of the cloud security management platform to verify the feasibility and effectiveness of the cloud security management platform.

A critical property of distributed data processing systems is the high level of reliability of such systems. A practical solution to this problem is to place copies of archives of magnetic media in the nodes of the system. These archives are used to restore data destroyed during the processing of requests to this data. The paper shows the impact of the use of archives on the reliability indicators of distributed systems.

Blockchain and artificial intelligence are two technologies that, when combined, have the ability to help each other realize their full potential. Blockchains can guarantee the accessibility and consistent admittance to integrity safeguarded big data indexes from numerous areas, allowing AI systems to learn more effectively and thoroughly. Similarly, artificial intelligence (AI) can be used to offer new consensus processes, and hence new methods of engaging with Blockchains. When it comes to sensitive data, such as corporate, healthcare, and financial data, various security and privacy problems arise that must be properly evaluated. Interaction with Blockchains is vulnerable to data credibility checks, transactional data leakages, data protection rules compliance, on-chain data privacy, and malicious smart contracts. To solve these issues, new security and privacy-preserving technologies are being developed. AI-based blockchain data processing, either based on AI or used to defend AI-based blockchain data processing, is emerging to simplify the integration of these two cutting-edge technologies.

This paper mainly studies an attack effectiveness evaluation method for AD hoc networks based on rough set theory. Firstly, we use OPNET to build AD hoc network simulation scenario, design and develop attack module, and obtain network performance parameters before and after the attack. Then the rough set theory is used to evaluate the attack effectiveness. The results show that this method can effectively evaluate the performance of AD hoc networks before and after attacks.

Fully homomorphic encryption (FHE) provides effective security assurance for privacy computing in cloud environments. But the existing FHE schemes are generally faced with challenges including using single-bit encryption and large ciphertext noise, which greatly affects the encryption efficiency and practicability. In this paper, a low-noise FHE scheme supporting multi-bit encryption is proposed based on the HAO scheme. The new scheme redesigns the encryption method without changing the system parameters and expands the plaintext space to support the encryption of integer matrices. In the process of noise reduction, we introduce a PNR method and use the subGaussian distribution theory to analyze the ciphertext noise. The security and the efficiency analysis show that the improved scheme can resist the chosen plaintext attack and effectively reduce the noise expansion rate. Comparative experiments show that the scheme has high encryption efficiency and is suitable for the privacy-preserving computation of integer matrices.

Big data continues to grow in the manufacturing domain due to increasing interconnectivity on the shop floor in the course of the fourth industrial revolution. The optimization of machines based on either real-time or historical machine data provides benefits to both machine producers and operators. In order to be able to make use of these opportunities, it is necessary to access the machine data, which can include sensitive information such as intellectual property. Employing the use case of machine tools, this paper presents a solution enabling industrial data sharing and cloud collaboration while protecting sensitive information. It employs the edge computing paradigm to apply differential privacy to machine data in order to protect sensitive information and simultaneously allow machine producers to perform the necessary calculations and analyses using this data.

Intellectual Property Rights (IPR) results from years of research and wisdom by property owners, and it plays an increasingly important role in promoting economic development, technological progress, and cultural prosperity. Thus, we need to strengthen the degree of protection of IPR. However, as internet technology continues to open up the market for IPR, the ease of network operation has led to infringement of IPR in some cases. Intellectual property infringement has occurred in some cases. Also, Internet development's concealed and rapid nature has led to the fact that IPR infringers cannot be easily detected. This paper addresses how to protect the rights and interests of IPR holders in the context of the rapid development of the internet. This paper explains the IPR and proposes an algorithm to enhance security for a better security model to protect IPR. This proposes optimization techniques to detect intruder attacks for securing IPR, by using support vector machines (SVM), it provides better results to secure public and private intellectual data by optimizing technologies.

The power grid has high requirements for data security, and data security audit technology is facing challenges. Because the server in the power grid operating environment is considered untrustworthy and does not have the authority to obtain the secret key, the encrypted data cannot be parsed and the data processing ability of the data center is restricted. In response to the above problems, the power grid database encryption system was designed, and the access control module and the encryption module that should be written based on SQL statements were explained. The database encryption system was developed using the Java language and deployed in the cloud environment. Finally, the method was proved by experiments. feasibility.

The ecosystem of the Internet of Things (IoT) continues growing now and covers more and more fields. One of these areas is the Industrial Internet of Things (IIoT) which integrates sensors and actuators, business applications, open web applications, multimedia security systems, positioning, and tracking systems. Each of these components creates its own data stream and has its own parameters of the probability distribution when transmitting information packets. One such distribution, specific to the TrumpfTruPrint 1000 IIoT system, is the beta distribution. We described issues of the processing of such a data flow by an agent model of the \$5\textbackslashtextbackslashtimes5\$ NoC switch fabric. The concepts of modern telecommunication networks 5G/6G imply the processing of “small” data in the place of their origin, not excluding the centralized processing of big data. This process, which involves the transmission, distribution, and processing of data, involves a large number of devices: routers, multiprocessor systems, multi-core systems, etc. We assumed that the data stream is processed by a device with the network structure, such as NoC, and goes to its built-in router. We carried out a study how the average queues of the \$5\textbackslashtextbackslashtimes5\$ router change with changes in the parameters of a data stream that has a beta distribution.

Modern Intelligent Transport Systems (ITSs) are comprehensive applications that have to cope with a multitude of challenges while meeting strict service and security standards. A novel data-centric middleware that provides the foundation of such systems is presented in this paper. This middleware is designed for high scalability, fast data processing and multimodality. To achieve these goals, an innovative spatial annotation (SpatiaIJSON) is utilised. SpatialJSON allows the representation of geometry, topology and traffic information in one dataset. Data processing is designed in such a manner that any schema or ontology can be used to express information. Further, common concerns of ITSs are addressed, such as authenticity of messages. The core task, however, is to ensure a quick exchange of evaluated information between the individual traffic participants.

There have been researches on Distributed Denial of Service (DDoS) attack detection based on deep learning, but most of them use the feature data processed by data mining for feature learning and classification. Based on the original data flow, this paper combines the method of Gray Level Co-occurrence Matrix (GLCM), which not only retains the original data but also can further extract the potential relationship between the original data. The original data matrix and the reconstructed matrix were taken as the input of the model, and the Convolutional Neural Network(CNN) was used for feature learning. Finally, the classifier model was trained for detection. The experimental part is divided into two parts: comparing the detection effect of different data processing methods and different deep learning algorithms; the effectiveness and objectivity of the proposed method are verified by comparing the detection effect of the deep learning algorithm with that of the statistical analysis feature algorithm.

Integrated with various electronic control units (ECUs), vehicles are becoming more intelligent with the assistance of essential connections. However, the interaction with the outside world raises great concerns on cyber-attacks. As a main standard for in-vehicle network, Controller Area Network (CAN) does not have any built-in security mechanisms to guarantee a secure communication. This increases risks of denial of service, remote control attacks by an attacker, posing serious threats to underlying vehicles, property and human lives. As a result, it is urgent to develop an effective in-vehicle network intrusion detection system (IDS) for better security. In this paper, we propose a Feature-based Sliding Window (FSW) to extract the feature of CAN Data Field and CAN IDs. Then we construct a convolutional encoder network (CEN) to detect network intrusion of CAN networks. The proposed FSW-CEN method is evaluated on real-world datasets. The experimental results show that compared to traditional data processing methods and convolutional neural networks, our method is able to detect attacks with a higher accuracy in terms of detection accuracy and false negative rate.

The push for data sharing and data processing across organisational boundaries creates challenges at many levels of the software stack. Data sharing and processing rely on the participating parties agreeing on the permissible operations and expressing them into actionable contracts and policies. Converting these contracts and policies into a operational infrastructure is still a matter of research and therefore begs the question how should a digital data market place infrastructure look like? In this paper we investigate how communication fabric and applications can be tightly coupled into a multi-domain overlay network which enforces accountability. We prove our concepts with a prototype which shows how a simple workflow can run across organisational boundaries.

Many technological cases exploiting data science have been realized in recent years; machine learning, Internet of Things, and stream data processing are examples of this trend. Other advanced applications have focused on capturing the value from streaming data of different objects of transport and traffic management in an Intelligent Transportation System (ITS). In this context, security control and trust level play a decisive role in the sustainable adoption of this trend. However, conceptual work integrating the security approaches of different disciplines into one coherent reference architecture is limited. The contribution of this paper is a reference architecture for ITS security (called SITS). In addition, a classification of Big Data technologies, products, and services to address the ITS trust challenges is presented. We also proposed a novel multi-tier ITS security framework for validating the usability of SITS with business intelligence development in the enterprise domain.

Over the past few years, we have experienced great technological advancements in the information and communication field, which has significantly contributed to reshaping the Intelligent Transportation System (ITS) concept. Evolving from the platform of a collection of sensors aiming to collect data, the data exchanged paradigm among vehicles is shifted from the local network to the cloud. With the introduction of cloud and edge computing along with ubiquitous 5G mobile network, it is expected to see the role of Artificial Intelligence (AI) in data processing and smart decision imminent. So as to fully understand the future automobile scenario in this verge of industrial revolution 4.0, it is necessary first of all to get a clear understanding of the cutting-edge technologies that going to take place in the automotive ecosystem so that the cyber-physical impact on transportation system can be measured. CIoV, which is abbreviated from Cognitive Internet of Vehicle, is one of the recently proposed architectures of the technological evolution in transportation, and it has amassed great attention. It introduces cloud-based artificial intelligence and machine learning into transportation system. What are the future expectations of CIoV? To fully contemplate this architecture's future potentials, and milestones set to achieve, it is crucial to understand all the technologies that leaned into it. Also, the security issues to meet the security requirements of its practical implementation. Aiming to that, this paper presents the evolution of CIoV along with the layer abstractions to outline the distinctive functional parts of the proposed architecture. It also gives an investigation of the prime security and privacy issues associated with technological evolution to take measures.

The use of biometric-based authentication systems spread over daily life consumer electronics. Over the years, researchers' interest shifted from hard (such as fingerprints, voice and keystroke dynamics) to soft biometrics (such as age, ethnicity and gender), mainly by using the latter to improve the authentication systems effectiveness. While newer approaches are constantly being proposed by domain experts, in the last years Deep Learning has raised in many computer vision tasks, also becoming the current state-of-art for several biometric approaches. However, since the automatic processing of data rich in sensitive information could expose users to privacy threats associated to their unfair use (i.e. gender or ethnicity), in the last years researchers started to focus on the development of defensive strategies in the view of a more secure and private AI. The aim of this work is to exploit Adversarial Perturbation, namely approaches able to mislead state-of-the-art CNNs by injecting a suitable small perturbation over the input image, to protect subjects against unwanted soft biometrics-based identification by automatic means. In particular, since ethnicity is one of the most critical soft biometrics, as a case of study we will focus on the generation of adversarial stickers that, once printed, can hide subjects ethnicity in a real-world scenario.

The edge and fog computing paradigms enable more responsive and smarter systems without relying on cloud servers for data processing and storage. This reduces network load as well as latency. Nonetheless, the addition of new layers in the network architecture increases the number of security vulnerabilities. In privacy-critical systems, the appearance of new vulnerabilities is more significant. To cope with this issue, we propose and implement an Ethereum Blockchain based architecture with edge artificial intelligence to analyze data at the edge of the network and keep track of the parties that access the results of the analysis, which are stored in distributed databases.

Principal Component Analysis (PCA) is a basic method of fault diagnosis based on multivariate statistical analysis. It utilizes the linear correlation between multiple process variables to implement process fault diagnosis and has been widely used. Traditional PCA fault diagnosis ignores the impact of faults with different magnitudes on detection accuracy. Based on a variety of data processing methods, this paper proposes a multi-level and multi-granularity principal component analysis method to make the detection results more accurate.