Biblio

6LoWPAN is a widely used protocol for communication over IPV6 Low-power Wireless Personal Area Networks. Unfortunately, the 6LoWPAN packet fragmentation mechanism possesses vulnerabilities that adversaries can exploit to perform network attacks. Lack of fragment authentication, payload integrity verification, and sender IP address validation lead to fabrication, duplication, and impersonation attacks. Moreover, adversaries can abuse the poor reassembly buffer management technique of the 6LoWPAN layer to perform buffer exhaustion and selective forwarding attacks. In this paper, we propose SecuPAN - a security scheme for mitigating fragmentation-based network attacks in 6LoWPAN networks and devices. We propose a Message Authentication Code based per-fragment integrity and authenticity verification scheme to defend against fabrication and duplication attacks. We also present a mechanism for computing datagram-tag and IPv6 address cryptographically to mitigate impersonation attacks. Additionally, our reputation-based buffer management scheme protects 6LoWPAN devices from buffer reservation attacks. We provide an extensive security analysis of SecuPAN to demonstrate that SecuPAN is secure against strong adversarial scenarios. We also implemented a prototype of SecuPAN on Contiki enabled IoT devices and provided a performance analysis of our proposed scheme.

Wireless Internet of Things (IoT) devices share several features such as limited energy supply, low computing power, limited memory size, and vulnerable radio communication network. IETF proposed the Constrained Application Protocol (CoAP) for this type of network. This paper presents implementation of CoAP into an embedded IoT device used for smart Energy Storage System (ESS) under microgrid environment. Confirmable message type was adopted to provide reliable communication. Since the frame size of IEEE 802.15.4 physical layer was limited to 127 bytes, the header of 6LoWPAN and UDP was compressed to reduce fragmentation and reassembly overhead. Performance of the communication service was tested by measuring round trip time between two end nodes of developed system.

Examining implementations of the 6LoWPAN Internet Standard in major embedded operating systems, we observe that they do not fully interoperate. We find this is due to some inherent design flaws in 6LoWPAN. We propose and demonstrate four principles that can be used to structure protocols for low power devices that encourage interoperability between diverse implementations.

Internet of things (IoT) is the smart network which connects smart objects over the Internet. The Internet is untrusted and unreliable network and thus IoT network is vulnerable to different kind of attacks. Conventional encryption and authentication techniques sometimes fail on IoT based network and intrusion may succeed to destroy the network. So, it is necessary to design intrusion detection system for such network. In our paper, we detect routing attacks such as sinkhole and selective forwarding. We have also tried to prevent our network from these attacks. We designed detection and prevention algorithm, i.e., KMA (Key Match Algorithm) and CBA (Cluster- Based Algorithm) in MatLab simulation environment. We gave two intrusion detection mechanisms and compared their results as well. True positive intrusion detection rate for our work is between 50% to 80% with KMA and 76% to 96% with CBA algorithm.

A significant segment of the Internet of Things (IoT) is the resource constrained Low Power and Lossy Networks (LLNs). The communication protocol used in LLNs is 6LOWPAN (IPv6 over Low-power Wireless Personal Area Network) which makes use of RPL (IPv6 Routing Protocol over Low power and Lossy network) as its routing protocol. In recent times, several security breaches in IoT networks occurred by targeting routers to instigate various DDoS (Distributed Denial of Service) attacks. Hence, routing security has become an important problem in securing the IoT environment. Though RPL meets all the routing requirements of LLNs, it is important to perform a holistic security assessment of RPL as it is susceptible to many security attacks. An important attribute of RPL is its rank property. The rank property defines the placement of sensor nodes in the RPL DODAG (Destination Oriented Directed Acyclic Graphs) based on an Objective Function. Examples of Objective Functions include Expected Transmission Count, Packet Delivery Rate etc. Rank property assists in routing path optimization, reducing control overhead and maintaining a loop free topology through rank based data path validation. In this paper, we investigate the vulnerabilities of the rank property of RPL by constructing an Attack Graph. For the construction of the Attack Graph we analyzed all the possible threats associated with rank property. Through our investigation we found that violation of protocols related to rank property results in several RPL attacks causing topological sub-optimization, topological isolation, resource consumption and traffic disruption. Routing security essentially comprises mechanisms to ensure correct implementation of the routing protocol. In this paper, we also present some observations which can be used to devise mechanisms to prevent the exploitation of the vulnerabilities of the rank property.

Internet-of-Things (IoT) is a resource-constrained network with machines low on power, processing and memory capabilities. Resource constraints in IoT impact the adoption of protocols for design and validation of unique identity (ID) for every machine. Malicious machines spoof ID to pose as administrative machines and program their neighbour systems in the network with malware. The cycle of ID spoofing and infecting the IP-enabled devices with malware creates an entire network popularly termed as the Botnet. In this paper, we study 6LoWPAN and ZigBee for DDoS and ID spoofing vulnerabilities. We propose a design for generation and validation of ID on such systems called Pseudo Random Identity Generator (PRIG). We compare the performance of PRIG-adapted 6LoWPAN with 6LoWPAN in a simulated personal area network (PAN) model under DDoS stress and demonstrate a 93% reduction in ID validation time as well as an improvement of 67% in overall throughput.

The software defined networking framework facilitates flexible and reliable internet of things networks by moving the network intelligence to a centralized location while enabling low power wireless network in the edge. In this paper, we present SD-WSN6Lo, a novel software-defined wireless management solution for 6LoWPAN networks that aims to reduce the management complexity in WSN's. As an example of the technique, a simulation of controlling the power consumption of sensor nodes is presented. The results demonstrate improved energy consumption of approximately 15% on average per node compared to the baseline condition.

6LoWPAN technology realizes the IPv6 packet transmission in the IEEE 802.15.4 based WSN. And 6LoWPAN is regarded as one of the ideal technologies to realize the interconnection between WSN and Internet, which is the key to build the IoT. Contiki is an open source and highly portable multitasking operating system, in which the 6LoWPAN has been implemented. In contiki, only several K Bytes of code and a few hundred bytes of memory are required to provide a multitasking environment and built-in TCP/IP support. This makes it especially suitable for memory constrained embedded platforms. In this paper, a lightweight 6LoWPAN gateway based on Contiki is designed and its designs of hardware and software are described. A complex experiment environment is presented, in which the gateway's capability of accessing the Internet is verified, and its performance about the average network delay and jitter are analyzed. The experimental results show that the gateway designed in this paper can not only realize the interconnection between 6LoWPAN networks and Internet, but also have good network adaptability and stability.

Internet of things has become a subject of interest across a different industry domain. It includes 6LoWPAN (Low-Power Wireless Personal Area Network) which is used for a variety of application including home automation, sensor networks, manufacturing and industry application etc. However, gathering such a huge amount of data from such a different domain causes a problem of traffic congestion, high reliability, high energy efficiency etc. In order to address such problems, content based routing (CBR) technique is proposed, where routing paths are decided according to the type of content. By routing the correlated data to hop nodes for processing, a higher data aggregation ratio can be obtained, which in turns reducing the traffic congestion and minimizes the energy consumption. CBR is implemented on top of existing RPL (Routing Protocol for Low Power and Lossy network) and implemented in contiki operating system using cooja simulator. The analysis are carried out on the basis average power consumption, packet delivery ratio etc.

The Internet Protocol version 6 (IPv6) over Low Power Wireless Personal Area Networks (6LoWPAN), which is a promising technology to promote the development of the Internet of Things (IoT), has been proposed to connect millions of IP-based sensing devices over the open Internet. To support the mobility of these resource constrained sensing nodes, the Proxy Mobile IPv6 (PMIPv6) has been proposed as the standard. Although the standard has specified some issues of security and mobility in 6LoWPANs, the issues of supporting secure group handovers have not been addressed much by the current existing solutions. In this paper, to reduce the handover latency and signaling cost, an efficient and secure group mobility scheme is designed to support seamless handovers for a group of resource constrained 6LoWPAN devices. With the consideration of the devices holding limited energy capacities, only simple hash and symmetric encryption method is used. The security analysis and the performance evaluation results show that the proposed 6LoWPAN group handover scheme could not only enhance the security functionalities but also support fast authentication for handovers.

Successful deployment of Low power and Lossy Networks (LLNs) requires self-organising, self-configuring, security, and mobility support. However, these characteristics can be exploited to perform security attacks against the Routing Protocol for Low-Power and Lossy Networks (RPL). In this paper, we address the lack of strong identity and security mechanisms in RPL. We first demonstrate by simulation the impact of Sybil-Mobile attack, namely SybM, on RPL with respect to control overhead, packet delivery and energy consumption. Then, we introduce a new Intrusion Detection System (IDS) scheme for RPL, named Trust-based IDS (T-IDS). T-IDS is a distributed, cooperative and hierarchical trust-based IDS, which can detect novel intrusions by comparing network behavior deviations. In T-IDS, each node is considered as monitoring node and collaborates with his peers to detect intrusions and report them to a 6LoWPAN Border Router (6BR). In our solution, we introduced a new timer and minor extensions to RPL messages format to deal with mobility, identity and multicast issues. In addition, each node is equipped with a Trusted Platform Module co-processor to handle identification and off-load security related computation and storage.

The Internet of Things leads to the inter-connectivity of a wide range of devices. This heterogeneity of hardware and software poses significant challenges to security. Constrained IoT devices often do not have enough resources to carry the overhead of an intrusion protection system or complex security protocols. A typical initial step in network security is a network scan in order to find vulnerable nodes. In the context of IoT, the initiator of the scan can be particularly interested in finding constrained devices, assuming that they are easier targets. In IoT networks hosting devices of various types, performing a scan with a high discovery rate can be a challenging task, since low-power networks such as IEEE 802.15.4 are easily overloaded. In this paper, we propose an approach to increase the efficiency of network scans by combining them with active network measurements. The measurements allow the scanner to differentiate IoT nodes by the used network technology. We show that the knowledge gained from this differentiation can be used to control the scan strategy in order to reduce probe losses.

Internet Protocol version 6 (IPv6) over Low power Wireless Personal Area Networks (6LoWPAN) is extensively used in wireless sensor networks (WSNs) due to its ability to transmit IPv6 packet with low bandwidth and limited resources. 6LoWPAN has several operations in each layer. Most existing security challenges are focused on the network layer, which is represented by its routing protocol for low-power and lossy network (RPL). RPL components include WSN nodes that have constrained resources. Therefore, the exposure of RPL to various attacks may lead to network damage. A sinkhole attack is a routing attack that could affect the network topology. This paper aims to investigate the existing detection mechanisms used in detecting sinkhole attack on RPL-based networks. This work categorizes and presents each mechanism according to certain aspects. Then, their advantages and drawbacks with regard to resource consumption and false positive rate are discussed and compared.

This paper addresses the need for standard communication protocols for IoT devices with limited power and computational capabilities. The world is rapidly changing with the proliferation and deployment of IoT devices. This will bring in new communication challenges as these devices are connected to Internet and need to communicate with each other in real time. The paper provides an overview of IoT system architecture and the forthcoming challenges it will bring. There is an urging need to establish standards for communication in the IoT world. With the recent development of new protocols like CoAP, 6LowPAN, IEEE 802.15.4 and Thread in different layers of OSI model, additional challenges also present themselves. Performance and data management is becoming more critical than ever before due to the complexity of connecting raging number of IoT devices. The performance of the systems dealing with IoT devices will require appropriate capacity planning the associated development of data centers. Finally, the paper also presents some reasonable approaches to address the above issues in the IoT world.

Tactical wireless sensor networks (WSNs) are deployed over a region of interest for mission centric operations. The sink node in a tactical WSN is the aggregation point of data processing. Due to its essential role in the network, the sink node is a high priority target for an attacker who wishes to disable a tactical WSN. This paper focuses on the mitigation of sink-node vulnerability in a tactical WSN. Specifically, we study the issue of protecting the sink node through a technique known as k-anonymity. To achieve k-anonymity, we use a specific routing protocol designed to work within the constraints of WSN communication protocols, specifically IEEE 802.15.4. We use and modify the Lightweight Ad hoc On-Demand Next Generation (LOADng) reactive-routing protocol to achieve anonymity. This modified LOADng protocol prevents an attacker from identifying the sink node without adding significant complexity to the regular sensor nodes. We simulate the modified LOADng protocol using a custom-designed simulator in MATLAB. We demonstrate the effectiveness of our protocol and also show some of the performance tradeoffs that come with this method.

6L0WPAN is a communication protocol for Internet of Things. 6LoWPAN is IPv6 protocol modified for low power and lossy personal area networks. 6LoWPAN inherits threats from its predecessors IPv4 and IPv6. IP spoofing is a known attack prevalent in IPv4 and IPv6 networks but there are new vulnerabilities which creates new paths, leading to the attack. This study performs the experimental study to check the feasibility of performing IP spoofing attack on 6LoWPAN Network. Intruder misuses 6LoWPAN control messages which results into wrong IPv6-MAC binding in router. Attack is also simulated in cooja simulator. Simulated results are analyzed for finding cost to the attacker in terms of energy and memory consumption.

The 6L0WPAN adaptation layer is widely used in many Internet of Things (IoT) and vehicular networking applications. The current IoT framework [1], which introduced 6LoWPAN to the TCP/IP model, does not specif the implementation for managing its received-fragments buffer. This paper looks into the effect of current implementations of buffer management strategies at 6LoWPAN's response in case of fragmentation-based, buffer reservation Denial of Service (DoS) attacks. The Packet Drop Rate (PDR) is used to analyze how successful the attacker is for each management technique. Our investigation uses different defence strategies, which include our implementation of the Split Buffer mechanism [2] and a modified version of this mechanism that we devise in this paper as well. In particular, we introduce dynamic calculation for the average time between consecutive fragments and the use of a list of previously dropped packets tags. NS3 is used to simulate all the implementations. Our results show that using a ``slotted'' buffer would enhance 6LoWPAN's response against these attacks. The simulations also provide an in-depth look at using scoring systems to manage buffer cleanups.

6LoWPAN networks involving wireless sensors consist of resource starving miniature sensor nodes. Since secured authentication of these resource-constrained sensors is one of the important considerations during communication, use of asymmetric key distribution scheme may not be the perfect choice to achieve secure authentication. Recent research shows that Lucky Thirteen attack has compromised Datagram Transport Layer Security (DTLS) with Cipher Block Chaining (CBC) mode for key establishment. Even though EAKES6Lo and S3K techniques for key establishment follow the symmetric key establishment method, they strongly rely on a remote server and trust anchor for secure key distribution. Our proposed Lightweight Authentication Protocol (LAUP) used a symmetric key method with no preshared keys and comprised of four flights to establish authentication and session key distribution between sensors and Edge Router in a 6LoWPAN environment. Each flight uses freshly derived keys from existing information such as PAN ID (Personal Area Network IDentification) and device identities. We formally verified our scheme using the Scyther security protocol verification tool for authentication properties such as Aliveness, Secrecy, Non-Injective Agreement and Non-Injective Synchronization. We simulated and evaluated the proposed LAUP protocol using COOJA simulator with ContikiOS and achieved less computational time and low power consumption compared to existing authentication protocols such as the EAKES6Lo and SAKES.

Internet Protocol version 6 (IPv6) over Low-power Wireless Personal Area Networks (6LoWPAN) is extensively used in wireless sensor networks due to its capability to transmit IPv6 packets with low bandwidth and limited resources. 6LoWPAN has several operations in each layer. Most existing security challenges are focused on the network layer, which is represented by the Routing Protocol for Low-power and Lossy Networks (RPL). 6LoWPAN, with its routing protocol (RPL), usually uses nodes that have constrained resources (memory, power, and processor). In addition, RPL messages are exchanged among network nodes without any message authentication mechanism, thereby exposing the RPL to various attacks that may lead to network disruptions. A sinkhole attack utilizes the vulnerabilities in an RPL and attracts considerable traffic by advertising falsified data that change the routing preference for other nodes. This paper proposes the neighbor-passive monitoring technique (NPMT) for detecting sinkhole attacks in RPL-based networks. The proposed technique is evaluated using the COOJA simulator in terms of power consumption and detection accuracy. Moreover, NPMT is compared with popular detection mechanisms.

The interconnectivity of 6LoWPAN networks with the Internet raises serious security concerns, as constrained 6LoWPAN devices are accessible anywhere from the untrusted global Internet. Also, 6LoWPAN devices are mostly deployed in unattended environments, hence easy to capture and clone. Despite that state of the art crypto solutions provide information security, IPv6 enabled smart objects are vulnerable to attacks from outside and inside 6LoWPAN networks that are aimed to disrupt networks. This paper attempts to identify intrusions aimed to disrupt the Routing Protocol for Low-Power and Lossy Networks (RPL).In order to improve the security within 6LoWPAN networks, we extend SVELTE, an intrusion detection system for the Internet of Things, with an intrusion detection module that uses the ETX (Expected Transmissions) metric. In RPL, ETX is a link reliability metric and monitoring the ETX value can prevent an intruder from actively engaging 6LoWPAN nodes in malicious activities. We also propose geographic hints to identify malicious nodes that conduct attacks against ETX-based networks. We implement these extensions in the Contiki OS and evaluate them using the Cooja simulator.

Smart IoT applications require connecting multiple IoT devices and networks with multiple services running in fog and cloud computing platforms. One approach to connecting IoT devices with cloud and fog services is to create a federated virtual network. The main benefit of this approach is that IoT devices can then interact with multiple remote services using an application specific federated network where no traffic from other applications passes. This federated network spans multiple cloud platforms and IoT networks but it can be managed as a single entity. From the point of view of security, federated virtual networks can be managed centrally and be secured with a coherent global network security policy. This does not mean that the same security policy applies everywhere, but that the different security policies are specified in a single coherent security policy. In this paper we propose to extend a federated cloud networking security architecture so that it can secure IoT devices and networks. The federated network is extended to the edge of IoT networks by integrating a federation agent in an IoT gateway or network controller (Can bus, 6LowPan, Lora, ...). This allows communication between the federated cloud network and the IoT network. The security architecture is based on the concepts of network function virtualisation (NFV) and service function chaining (SFC) for composing security services. The IoT network and devices can then be protected by security virtual network functions (VNF) running at the edge of the IoT network.

IEEE 802.15.4 is widely used as lower layers for not only wellknown wireless communication standards such as ZigBee, 6LoWPAN, and WirelessHART, but also customized protocols developed by manufacturers, particularly for various Internet of Things (IoT) devices. Customized protocols are not usually publicly disclosed nor standardized. Moreover, unlike textual protocols (e.g., HTTP, SMTP, POP3.), customized protocols for IoT devices provide no clues such as strings or keywords that are useful for analysis. Instead, they use bits or bytes to represent header and body information in order to save power and bandwidth. On the other hand, they often do not employ encryption, fragmentation, or authentication to save cost and effort in implementations. In other words, their security relies only on the confidentiality of the protocol itself. In this paper, we introduce a novel methodology to analyze and reconstruct unknown wireless customized protocols over IEEE 802.15.4. Based on this methodology, we develop an automatic analysis and spoofing tool called WPAN automatic spoofer (WASp) that can be used to understand and reconstruct customized protocols to byte-level accuracy, and to generate packets that can be used for verification of analysis results or spoofing attacks. The methodology consists of four phases: packet collection, packet grouping, protocol analysis, and packet generation. Except for the packet collection step, all steps are fully automated. Although the use of customized protocols is also unknown before the collecting phase, we choose two real-world target systems for evaluation: the smart plug system and platform screen door (PSD) to evaluate our methodology and WASp. In the evaluation, 7,299 and 217 packets are used as datasets for both target systems, respectively. As a result, on average, WASp is found to reduce entropy of legitimate message space by 93.77% and 88.11% for customized protocols used in smart plug and PSD systems, respectively. In addition, on average, 48.19% of automatically generated packets are successfully spoofed for the first target systems.

Connectivity is at the heart of the future Internet-of-Things (IoT) infrastructure, which can control and communicate with remote sensors and actuators for the beacons, data collections, and forwarding nodes. Existing sensor network solutions cannot solve the bottleneck problems near the sink node; the tree-based Internet architecture has the single point of failure. To solve current deficiencies in multi-hop mesh network and cross-domain network design, we propose a mesh inside a mesh IoT network architecture. Our designed "edge router" incorporates these two mesh networks together and performs seamlessly transmission of multi-standard packets. The proposed IoT testbed interoperates with existing multi-standards (Wi-Fi, 6LoWPAN) and segments of networks, and provides both high-throughput Internet and resilient sensor coverage throughout the community.

In this demonstration, we showcase the XD middleware, a framework for expressive multiplexing of application communication streams onto underlying device-to-device communication links. XD allows applications to remain agnostic about which low-level networking stack is actually delivering messages and instead focus on the application-level content and delivery parameters. The IoT space has been flooded with new communication technologies (e.g., BLE, ZigBee, 6LoWPAN) to add to those already available on modern mobile devices (e.g., BLE, WiFi-Direct), substantially increasing the barrier to entry for developing innovative IoT applications. XD presents application developers with a simple publish-subscribe API for sending and receiving data streams, unburdening them from the task of selecting and coordinating communication channels. Our demonstration shows two Android applications, Disseminate and Prophet, running using our XD middleware for communication. We implemented BLE, WiFi Direct with TCP, and WiFi Direct with UDP communication stacks underneath XD.

The specification and implementation of network protocols are difficult tasks. This is particularly the case for WSN nodes which are typically implemented on low power microcontrollers with limited processing capabilities. Those platforms do not have the resources to run a full-fledged operating system but instead are programmed using a Real Time Operating System (RTOS) specialized in low-power wireless communications. The most popular are Contiki and TinyOS. Those RTOS support a fully-compliant IPv6 stack including the 6LoWPAN adaptation layer [1], several radio duty-cycling MAC protocols [2], [3] and multiple routing protocols [4].