Biblio

In the Internet of Things, it is more important than ever to effectively address the problem of secure transmission based on steganographic substitution by synthesizing digital sensor data. In this case, the degree to which the grayscale message is obscured is a necessary issue. To ensure information security in IoT systems, various methods are used and information security problems are solved to one degree or another. The article proposes a method and algorithm for a computer image in grayscale, in which the value of each pixel is one sample, representing the amount of light, carrying only information about the intensity. The proposed method in grayscale using steganographic coding provides a secure implementation of data transmission in the IoT system. Study results were analyzed using PSNR (Peak Signal to Noise Ratio).

With the development of information technology, the Internet of things (IOT) has gradually become the third wave of global information industry revolution after computer and Internet. Artificial intelligence (AI) and IOT technology is an important prerequisite for the rapid development of the current information society. However, while AI and IOT technologies bring convenient and intelligent services to people, they also have many defects and imperfect development. Therefore, it is necessary to pay more attention to the development of AI and IOT technologies, actively improve the application system, and create a network security management system for AI and IOT applications that can timely detect intrusion, assess risk and prevent viruses. In this paper, the network security risks caused by AI and IOT applications are analyzed. Therefore, in order to ensure the security of IOT environment, network security and privacy security have become the primary problems to be solved, and management should be strengthened from technical to legal aspects.

Ciphertext Policy Attribute-Based Encryption (CPABE) has gained popularity in the research area among the many proposed security models for providing fine-grained access control of data. Lightweight ECC-based CP-ABE schemes can provide feasible selective sharing from resource-constrained devices. However, the existing schemes lack support for a complete revocation mechanism at the user and attribute levels. We propose a novel scheme called Ecc Proxy based Scalable Attribute Revocation (EPSAR-CP-ABE) scheme. It extends an existing ECC-based CP-ABE scheme for lightweight IoT and smart-card devices to implement scalable attribute revocation. The scheme does not require re-distribution of secret keys and re-encryption of ciphertext. It uses a proxy server to furnish a proxy component for decryption. The dependency of the proposed scheme is minimal on the proxy server compared to the other related schemes. The storage and computational overhead due to the attribute revocation feature are negligible. Hence, the proposed EPSAR-CP-ABE scheme can be deployed practically for resource-constrained devices.

In recent years, the Internet-of-Things (IoT)-based traffic management system (ITMS) has attracted the attention of researchers from different fields, such as the automotive industry, academia and traffic management, due to its ability to enhance road safety and improve traffic efficiency. ITMS uses the Vehicle Ad-hoc Network (VANET) to communicate messages about traffic conditions or the event on the route to ensure the safety of the commuter. ITMS uses wireless communication technology for communication between different devices. Wireless communication has challenges to privacy and security. Challenges such as confidentiality, authentication, integrity, non-repudiation, identity, trust are major concerns of either security or privacy or both. This paper discusses the features of the traffic system, the features of the traffic management system (TMS) and the features of IoT that can be used in TMS with its challenges. Further, this paper analyses the work done in the last few years with the future scope of IoT in the TMS.

One of the attacks in the RPL protocol is the Clone ID attack, that the attacker clones the node's ID in the network. In this research, a Clone ID detection system is designed for the Internet of Things (IoT), implemented in Contiki operating system, and evaluated using the Cooja emulator. Our evaluation shows that the proposed method has desirable performance in terms of energy consumption overhead, true positive rate, and detection speed. The overhead cost of the proposed method is low enough that it can be deployed in limited-resource nodes. The proposed method in each node has two phases, which are the steps of gathering information and attack detection. In the proposed scheme, each node detects this type of attack using control packets received from its neighbors and their information such as IP, rank, Path ETX, and RSSI, as well as the use of a routing table. The design of this system will contribute to the security of the IoT network.

The Internet of Things (IoT) is clubbed by networking of sensors and other embedded electronics. As more devices are getting connected, the vulnerability of getting affected by various IoT threats also increases. Among the IoT threads, DDoS attacks are causing serious issues in recent years. In IoT, these attacks are challenging to detect and isolate. Thus, an effective Intrusion Detection System (IDS) is essential to defend against these attacks. The traditional IDS is based on manual blacklisting. These methods are time-consuming and will not be effective to detect novel intrusions. At present, IDS are automated and programmed to be dynamic which are aided by machine learning & deep learning models. The performance of these models mainly depends on the data used to train the model. Majority of IDS study is performed with non-compatible and outdated datasets like KDD 99 and NSL KDD. Research on specific DDoS attack datasets is very less. Therefore, in this paper, we first aim to examine the effect of existing datasets in the IoT environment. Then, we propose a real-time data collection framework for DNS amplification attacks in IoT. The generated network packets containing DDoS attack is captured through port mirroring.

Internet of Things (IoT) devices have rooted themselves in the everyday life of billions of people. Thus, researchers have applied automated bug finding techniques to improve their overall security. However, due to the difficulties in extracting and emulating custom firmware, black-box fuzzing is often the only viable analysis option. Unfortunately, this solution mostly produces invalid inputs, which are quickly discarded by the targeted IoT device and do not penetrate its code. Another proposed approach is to leverage the companion app (i.e., the mobile app typically used to control an IoT device) to generate well-structured fuzzing inputs. Unfortunately, the existing solutions produce fuzzing inputs that are constrained by app-side validation code, thus significantly limiting the range of discovered vulnerabilities.In this paper, we propose a novel approach that overcomes these limitations. Our key observation is that there exist functions inside the companion app that can be used to generate optimal (i.e., valid yet under-constrained) fuzzing inputs. Such functions, which we call fuzzing triggers, are executed before any data-transforming functions (e.g., network serialization), but after the input validation code. Consequently, they generate inputs that are not constrained by app-side sanitization code, and, at the same time, are not discarded by the analyzed IoT device due to their invalid format. We design and develop Diane, a tool that combines static and dynamic analysis to find fuzzing triggers in Android companion apps, and then uses them to fuzz IoT devices automatically. We use Diane to analyze 11 popular IoT devices, and identify 11 bugs, 9 of which are zero days. Our results also show that without using fuzzing triggers, it is not possible to generate bug-triggering inputs for many devices.

The rapid progress experienced in the Internet of Things (IoT) space is one that has introduced new and unique challenges for cybersecurity and IoT-Forensics. One of these problems is how digital forensics and incident response (DFIR) are handled in IoT. Since enormous users use IoT platforms to accomplish their day to day task, massive amounts of data streams are transferred with limited hardware resources; conducting DFIR needs a new approach to mitigate digital evidence and incident response challenges owing to the facts that there are no unified standard or classified principles for IoT forensics. Today's IoT DFIR relies on self-defined best practices and experiences. Given these challenges, IoT-related incidents need a more structured approach in identifying problems of DFIR. In this paper, we examined the major DFIR challenges in IoT by exploring the different phases involved in a DFIR when responding to IoT-related incidents. This study aims to provide researchers and practitioners a road-map that will help improve the standards of IoT security and DFIR.

Implementing the color images encryption is a challenging field of the research for IOT applications. An exponential growth in imaging cameras in IOT uses makes it critical to design the robust image security algorithms. It is also observed that performance of existing encryption methods degrades under the presence of noisy environments. This is the major concern of evaluating the encryption method in this paper. The prime concern of this paper is to design the fast efficient color images encryption algorithm by designing an efficient and robustness RSA encryption algorithm. Method takes the advantage of both preprocessing and the Gaussian pyramid (GP) approach for encryption. To improve the performance it is proposed to use the LAB color space and implement the RSA encryption on luminance (L) component using the GP domain. The median filter and image sharpening is used for preprocessing. The goal is to improve the performance under highly noisy imaging environment. The performance is compared based on the crypto weights and on the basis of visual artifacts and entropy analysis. The decrypted outputs are again converted to color image output. Using the LAB color space is expected to improve the entropy performance of the image. Result of proposed encryption method is evaluated under the different types of the noisy attacks over the color images and also performance is compared with state of art encryption methods. Significant improvement speed of the algorithm is compared in terms of the elapsed time

With the rise of Internet of Things (IoT) devices, home network management and security are becoming complex. There is an urgent requirement to make smart home network management more efficient. This work proposes an SDN-based architecture to secure smart home networks through K-Nearest Neighbor (KNN) based device classifications and malicious traffic detection. The efficiency is enhanced by offloading the computation-intensive KNN model to a Field Programmable Gate Arrays (FPGA). Furthermore, we propose a custom KNN solution that exhibits the best performance on an FPGA compared with four alternative KNN instances (i.e., 78% faster than a parallel Bubble Sort-based implementation and 99% faster than three other sorting algorithms). Moreover, with 36,225 training samples, the proposed KNN solution classifies a test query with 95% accuracy in approximately 4 ms on an FPGA compared to 57 seconds on a CPU platform. This highlights the promise of FPGA-based platforms for edge computing applications in the smart home.

Wireless Sensor Networks (WSN) are gaining popularity as being the backbone of Cyber physical systems, IOT and various data acquisition from sensors deployed in remote, inaccessible terrains have remote deployment. However due to remote deployment, WSN is an adhoc network of large number of sensors either heli-dropped in inaccessible terrain like volcanoes, Forests, border areas are highly energy deficient and available in large numbers. This makes it the right soup to become vulnerable to various kinds of Security attacks. The lack of energy and resources makes it deprived of developing a robust security code for mitigation of various kinds of attacks. Many attempts have been made to suggest a robust security Protocol. But these consume so much energy, bandwidth, processing power, memory and other resources that the sole purpose of data gathering from inaccessible terrain from energy deprived sensors gets defeated. This paper makes an attempt to study the types of attacks on different layers of WSN and the examine the recent trends in development of various security protocols to mitigate the attacks. Further, we have proposed a simple, lightweight but powerful security protocol known as Simple Sensor Security Protocol (SSSP), which captures the uniqueness of WSN and its isolation from internet to develop an energy efficient security solution.

With the widespread adoption of Internet of Things (IoT) applications around the world, security related problems become a challenge since the number of cybercrimes that must be identified and investigated increased dramatically. The volume of data generated and handled is immense due to the increased number of IoT applications around the world. As a result, when a cybercrime happens, the volume of digital data needs to be dealt with is massive. Consequently, more effort and time are needed to handle the security issues. As a result, in digital forensics, the analysis phase is an important and challenging phase. This paper proposes a generic proactive model for the cybercrime analysis process in the Internet of Things. The model is focused on the classification of evidences in advance based on its significance and relation to past crimes, as well as the severity of the evidence in terms of the probability occurrence of a cybercrime. This model is supposed to save time and effort during the automated forensic investigation process.

IoT applications are changing our daily lives. These innovative applications are supported by new communication technologies and protocols. Particularly, the information-centric network (ICN) paradigm is well suited for many IoT application scenarios that involve large-scale wireless sensor networks (WSNs). Even though the ICN approach can significantly reduce the network traffic by optimizing the process of information recovery from network nodes, it is also possible to apply data aggregation strategies. This paper proposes an unsupervised machine learning-based data aggregation strategy for multi-hop information-centric WSNs. The results show that the proposed algorithm can significantly reduce the ICN data traffic while having reduced information degradation.

Effective identification of Internet of things devices in cyberspace is of great significance to the protection of Cyberspace Security. However, there are a large number of such devices in cyberspace, which can not be identified by the existing methods of identifying IoT devices because of the lack of key information such as manufacturer name and device name in the response message. Their existence brings hidden danger to Cyberspace Security. In order to identify the IoT devices with missing key information in these response messages, this paper proposes an IoT device identification method, IoTCatcher. IoTCatcher uses HTTP response message and the structure and style characteristics of HTML document, and based on natural language processing technology and text similarity technology, classifies and compares the IoT devices whose response message lacks key information, so as to generate their device finger information. This paper proves that the recognition precision of IoTCatcher is 95.29%, and the recall rate is 91.01%. Compared with the existing methods, the overall performance is improved by 38.83%.

Bluetooth Low Energy mesh networks are emerging as new standard of short burst communications. While security of the messages is guaranteed thought standard encryption techniques, little has been done in terms of actively protecting the overall network in case of attacks aiming to undermine its integrity. Although many network analysis and risk mitigation techniques are currently available, they require considerable amounts of data coming from both legitimate and attack scenarios to sufficiently discriminate among them, which often turns into the requirement of a complete description of the traffic flowing through the network. Furthermore, there are no publicly available datasets to this extent for BLE mesh networks, due most to the novelty of the standard and to the absence of specific implementation tools. To create a reliable mechanism of network analysis suited for BLE in this paper we propose a machine learning Intrusion Detection System (IDS) based on pattern classification and recognition of the most classical denial of service attacks affecting this kind of networks, working on a single internal node, thus requiring a small amount of information to operate. Moreover, in order to overcome the gap created by the absence of data, we present our data collection system based on ESP32 that allowed the collection of the packets from the Network and the Model layers of the BLE Mesh stack, together with a set of experiments conducted to get the necessary data to train the IDS. In the last part, we describe some preliminary results obtained by the experimental setups, focusing on its strengths, as well as on the aspects where further analysis is required, hence proposing some improvements of the classification model as future work. Index Terms-Bluetooth, BLE Mesh, Intrusion Detection System, IoT, network security.

Internet of Things (IoT) devices are ubiquitous, with web cameras, smart refrigerators, and digital assistants appearing in homes, offices, and public spaces. However, these devices are lacking in security measures due to their low time to market and insufficient funding for security research and development. In order to improve the security of IoTs, we have defined novel security metrics based on generic IoT characteristics. Furthermore, we have developed automation for experimentation with IoT devices that results to repeatable and reproducible calculations of security metrics within a realistic IoT testbed. Our results demonstrate that repeatable IoT security measurements are feasible with automation. They prove quantitatively intuitive hypotheses. For example, an large number of inbound / outbound network connections contributes to higher probability of compromise or measuring password strength leads to a robust estimation of IoT security.

Verifying the integrity of IoT data in cloud-based IoT architectures is crucial for building reliable IoT applications. Traditional data integrity verification methods rely on a Trusted Third Party (TTP) that has issues of risk and operational cost by centralization. Distributed Ledger Technology (DLT) has a high potential to verify IoT data integrity and overcome the problems with TTPs. However, the existing DLTs have low transaction throughput, high computational and storage overhead, and are unsuitable for IoT environments, where a massive scale of data is generated. Recently, Directed Acyclic Graph (DAG) based DLTs have been proposed to address the low transaction throughput of linear DLTs. However, the integration of IoT Gateways (GWs) into the peer to peer (P2P) DLT network is challenging because of their low storage and computational capacity. This paper proposes Lightweight and Scalable DAG based distributed ledger for IoT (LSDI) that can work with resource-constrained IoT GWs to provide fast and scalable IoT data integrity verification. LSDI uses two key techniques: Pruning and Clustering, to reduce 1) storage overhead in IoT GWs by removing sufficiently old transactions, and 2) computational overhead of IoT GWs by partitioning a large P2P network into smaller P2P networks. The evaluation results of the proof of concept implementation showed that the proposed LSDI system achieves high transaction throughput and scalability while efficiently managing storage and computation overhead of the IoT GWs.

This work introduces a new microcomputing node with long-term resistant data security, based on asymmetric and symmetric encryption combined with the modern and established scripting language Python. The presented microcomputing node integrates a MicroPython runtime environment to address a wide audience of application engineers as user base instead of a selected group of embedded engineers, who have deep knowledge in programming IoT devices using C/C++. It combines its scripting capabilities with security features of modern smartcards and secure cellular networking based on 4G.

Low power and lossy networks (LLNs) devices resource-constrained nature make it difficult to implement security mechanisms to defend against RPL routing attacks. RPLs inbuilt security functions are not efficient in preventing a wide majority of routing attacks. RPLs optional security schemes can defend against external attacks, but cannot mitigate internal attacks. Moreover, RPL does not have any mechanism to verify the integrity of control messages used to keep topology updated and route the traffic. All these factors play a major role in increasing the RPLs threat level against routing attacks. In this paper, a comparative literature review of various researchers suggesting security mechanisms to mitigate security attacks aimed at RPL has been performed and methods have been contrasted.

The ecosystem of the Internet of Things (IoT) continues growing now and covers more and more fields. One of these areas is the Industrial Internet of Things (IIoT) which integrates sensors and actuators, business applications, open web applications, multimedia security systems, positioning, and tracking systems. Each of these components creates its own data stream and has its own parameters of the probability distribution when transmitting information packets. One such distribution, specific to the TrumpfTruPrint 1000 IIoT system, is the beta distribution. We described issues of the processing of such a data flow by an agent model of the \$5\textbackslashtextbackslashtimes5\$ NoC switch fabric. The concepts of modern telecommunication networks 5G/6G imply the processing of “small” data in the place of their origin, not excluding the centralized processing of big data. This process, which involves the transmission, distribution, and processing of data, involves a large number of devices: routers, multiprocessor systems, multi-core systems, etc. We assumed that the data stream is processed by a device with the network structure, such as NoC, and goes to its built-in router. We carried out a study how the average queues of the \$5\textbackslashtextbackslashtimes5\$ router change with changes in the parameters of a data stream that has a beta distribution.

IPsec is widely used for internet security because it offers confidentiality, integrity, and authenticity also protects from replay attacks. IP Security depends on numerous frameworks, organization propels, and cryptographic techniques. IPsec is a heavyweight complex security protocol suite. Because of complex architecture and implementation processes, security implementers prefer TLS. Because of complex implementation, it is impractical to manage over the IoT devices. We propose a simplified and lite version of internet security protocol implemented with only ESP. For encryption, we use AES, RAS-RLP public key cryptography.

Recently, it is predicted that interworking between heterogeneous devices will be accelerated due to the openness of the IoT (Internet of Things) platform, but various security threats are also expected to increase. However, most IoT open platforms remain at the level that utilizes existing security technologies. Therefore, a more secure security technology is required to prevent illegal copying and leakage of important data through stealing, theft, and hacking of IoT devices. In addition, a technique capable of ensuring interoperability with existing standard technologies is required. This paper proposes an IoT device authentication method based on PUF (Physical Unclonable Function) that operates on an IoT open platform. By utilizing PUF technology, the proposed method can effectively respond to the threat of exposure of the authentication key of the existing IoT open platform. Above all, the proposed method can contribute to compatibility and interoperability with existing technologies by providing a device authentication method that can be effectively applied to the OCF Iotivity standard specification, which is a representative IoT open platform.

Internet of Battlefield Things (IoBT) is the application of Internet of Things (IoT) to a battlefield environment. IoBT networks operate in difficult conditions due to high mobility and unpredictable nature of battle fields and securing them is a challenge. There is increasing interest to use deception techniques to enhance the security of IoBT networks. A honeypot is a system installed on a network as a trap to attract the attention of an attacker and it does not store any valuable data. In this work, we introduce IoBT dual sensor gateways. We propose a Reinforcement Learning (RL)-assisted scheme, in which the IoBT dual sensor gateways intelligently switch between honeypot and real function based on a threshold. The optimal threshold is determined using reinforcement learning approach that adapts to nodes reputation. To focus on the impact of the mobile and uncertain behavior of IoBT networks on the proposed scheme, we consider the nodes as moving vehicles. We statistically analyze the results of our RL-based scheme obtained using ns-3 network simulation, and optimize value of the threshold.

{On considering workplace thefts as a major problem, there is a requirement of designing a vandal proof door hardware and locking mechanism for ensuring the security of our property. So the door lock system with extra security features with a user friendly cost is suggested in this paper. When a stranger comes at the door, he/she has to pass three security levels for unlocking the solenoid locks present at the door and if he fails to do so, the door will remain locked. These three levels are of three extraordinary security features as one of them is using Fingerprint sensor, second is using a knocking pattern, and the last lock is unlocked by the preset pin/pattern entered by the user. Since, in addition to these features, there is one more option for the case of appearing of guest at the door and that is the Image capturing using web-camera present at the door and here the owner of the house is able to unlock all the locks if he wants the guest to enter the home. This all will be monitored by Node MCU}.

The standard routing technique that was developed for satisfying low power IoT application needs is RPL which is a protocol in compliance with 6LoWPAN specification. RPL was created for addressing the issues and challenges of constrained and lossy network routing. However, RPL does not accomplish efficiency with respect to power and reliability altogether which are definitely needed in IoT applications. RPL runs on routing metrics and objective function which determines the optimal path in routing. This paper focuses on contributing a comprehensive survey on the improved objective functions proposed by several researchers for RPL. In addition, the paper concentrates on highlighting the strengths and shortcomings of the different approaches in designing the objective function. The approaches built on Fuzzy logic are found to be more efficient and the relevant works related to these are compared. Furthermore, we present the insights drawn from the survey and summarize the challenges which can be effectively utilized for future works.