Biblio
Mechanical faults of Gas Insulated Switchgear (GIS) often occurred, which may cause serious losses. Detecting vibration signal was effective for condition monitoring and fault diagnosis of GIS. The vibration characteristic of GIS in service was detected and researched based on a developed testing system in this paper, and feature fingerprint extraction method was proposed to evaluate vibration characteristics and diagnose mechanical defects. Through analyzing the spectrum of the vibration signal, we could see that vibration frequency of operating GIS was about 100Hz under normal condition. By means of the wavelet transformation, the vibration fingerprint was extracted for the diagnosis of mechanical vibration. The mechanical vibration characteristic of GIS including circuit breaker and arrester in service was detected, we could see that the frequency distribution of abnormal vibration signal was wider, it contained a lot of high harmonic components besides the 100Hz component, and the vibration acoustic fingerprint was totally different from the normal ones, that is, by comparing the frequency spectra and vibration fingerprint, the mechanical faults of GIS could be found effectively.
In this paper, we consider one of the approaches to the study of the characteristics of an information system that is under the influence of various factors, and their management using neural networks and wavelet transforms based on determining the relationship between the modified state of the information system and the possibility of dynamic analysis of effects. At the same time, the process of influencing the information system includes the following components: impact on the components providing the functions of the information system; determination of the result of exposure; analysis of the result of exposure; response to the result of exposure. As an input signal, the characteristics of the means that affect are taken. The system includes an adaptive response unit, the input of which receives signals about the prerequisites for changes, and at the output, this unit generates signals for the inclusion of appropriate means to eliminate or compensate for these prerequisites or directly the changes in the information system.
Due to greater network capacity and faster data speed, fifth generation (5G) technology is expected to provide a huge improvement in Internet of Things (IoTs) applications, Augmented & Virtual Reality (AR/VR) technologies, and Machine Type Communications (MTC). Consumer will be able to send/receive high quality multimedia data. For the protection of sensitive multimedia data, a large number of encryption algorithms are available, however, these encryption schemes does not provide light-weight encryption solution for real-time application requirements. This paper proposes a new multi-chaos computational efficient encryption for digital images. In the proposed scheme, plaintext image is transformed using Lifting Wavelet Transform (LWT) and only one-fourth part of the transformed image is encrypted using light-weight Chebyshev and Intertwining maps. Both chaotic maps were chaotically coupled for the confusion and diffusion processes which further enhances the image security. Encryption/decryption speed and other security measures such as correlation coefficient, entropy, Number of Pixels Change Rate (NPCR), contrast, energy, homogeneity confirm the superiority of the proposed light-weight encryption scheme.
To identify potential risks to the system security presented by time series it is offered to use wavelet analysis, the indicator of time-and-frequency distribution, the correlation analysis of wavelet-spectra for receiving rather complete range of data about the process studied. The indicator of time-and-frequency localization of time series was proposed allowing to estimate the speed of non-stationary changing. The complex approach is proposed to use the wavelet analysis, the time-and-frequency distribution of time series and the wavelet spectra correlation analysis; this approach contributes to obtaining complete information on the studied phenomenon both in numerical terms, and in the form of visualization for identifying and predicting potential system security threats.
This paper presents an image technique Discrete Wavelet Transform and Singular Value Decomposition for image steganography. We are using a text file and convert into an image as watermark and embed watermarks into the cover image. We evaluate performance and compare this method with other methods like Least Significant Bit, Discrete Cosine Transform, and Discrete Wavelet Transform using Peak Signal Noise Ratio and Mean Squared Error. The result of this experiment showed that combine of Discrete Wavelet Transform and Singular Value Decomposition performance is better than the Least Significant Bit, Discrete Cosine Transform, and Discrete Wavelet Transform. The result of Peak Signal Noise Ratio obtained from Discrete Wavelet Transform and Singular Value Decomposition method is 57.0519 and 56.9520 while the result of Mean Squared Error is 0.1282 and 0.1311. Future work for this research is to add the encryption method on the data to be entered so that if there is an attack then the encryption method can secure the data becomes more secure.
We are exploring new ways to analyze phishing attacks. To do this, we investigate the change in the dynamics of the power of phishing attacks. We also analyze the effectiveness of detection of phishing attacks. We are considering the possibility of using new tools for analyzing phishing attacks. As such tools, the methods of chaos theory and the ideology of wavelet coherence are used. The use of such analysis tools makes it possible to investigate the peculiarities of the phishing attacks occurrence, as well as methods for their identification effectiveness. This allows you to expand the scope of the analysis of phishing attacks. For analysis, we use real data about phishing attacks.
In this paper, we propose to impose a multiscale contextual loss for image style transfer based on Convolutional Neural Networks (CNN). In the traditional optimization framework, a new stylized image is synthesized by constraining the high-level CNN features similar to a content image and the lower-level CNN features similar to a style image, which, however, appears to lost many details of the content image, presenting unpleasing and inconsistent distortions or artifacts. The proposed multiscale contextual loss, named Haar loss, is responsible for preserving the lost details by dint of matching the features derived from the content image and the synthesized image via wavelet transform. It endows the synthesized image with the characteristic to better retain the semantic information of the content image. More specifically, the unpleasant distortions can be effectively alleviated while the style can be well preserved. In the experiments, we show the visually more consistent and simultaneously well-stylized images generated by incorporating the multiscale contextual loss.
Based on the feature analysis of image content, this paper proposes a novel steganalytic method for grayscale images in spatial domain. In this work, we firstly investigates directional lifting wavelet transform (DLWT) as a sparse representation in compressive sensing (CS) domain. Then a block CS (BCS) measurement matrix is designed by using the generalized Gaussian distribution (GGD) model, in which the measurement matrix can be used to sense the DLWT coefficients of images to reflect the feature residual introduced by steganography. Extensive experiments are showed that proposed scheme CS-based is feasible and universal for detecting stegography in spatial domain.
Among many research efforts devoted to automated art investigations, the problem of quantification of literary style remains current. Meanwhile, linguists and computer scientists have tried to sort out texts according to their types or authors. We use the recently-introduced p-leader multifractal formalism to analyze a corpus of novels written for adults and young adults, with the goal of assessing if a difference in style can be found. Our results agree with the interpretation that novels written for young adults largely follow conventions of the genre, whereas novels written for adults are less homogeneous.
This paper proposes a novel privacy-preserving smart metering system for aggregating distributed smart meter data. It addresses two important challenges: (i) individual users wish to publish sensitive smart metering data for specific purposes, and (ii) an untrusted aggregator aims to make queries on the aggregate data. We handle these challenges using two main techniques. First, we propose Fourier Perturbation Algorithm (FPA) and Wavelet Perturbation Algorithm (WPA) which utilize Fourier/Wavelet transformation and distributed differential privacy (DDP) to provide privacy for the released statistic with provable sensitivity and error bounds. Second, we leverage an exponential ElGamal encryption mechanism to enable secure communications between the users and the untrusted aggregator. Standard differential privacy techniques perform poorly for time-series data as it results in a Θ(n) noise to answer n queries, rendering the answers practically useless if n is large. Our proposed distributed differential privacy mechanism relies on Gaussian principles to generate distributed noise, which guarantees differential privacy for each user with O(1) error, and provides computational simplicity and scalability. Compared with Gaussian Perturbation Algorithm (GPA) which adds distributed Gaussian noise to the original data, the experimental results demonstrate the superiority of the proposed FPA and WPA by adding noise to the transformed coefficients.
Audio Steganography is the technique of hiding any secret information behind a cover audio file without impairing its quality. Data hiding in audio signals has various applications such as secret communications and concealing data that may influence the security and safety of governments and personnel and has possible important applications in 5G communication systems. This paper proposes an efficient secure steganography scheme based on the high correlation between successive audio signals. This is similar to the case of differential pulse coding modulation technique (DPCM) where encoding uses the redundancy in sample values to encode the signals with lower bit rate. Discrete Wavelet Transform (DWT) of audio samples is used to store hidden data in the least important coefficients of Haar transform. We use the benefit of the small differences between successive samples generated from encoding of the cover audio signal wavelet coefficients to hide image data without making a remarkable change in the cover audio signal. instead of changing of actual audio samples so this doesn't perceptually degrade the audio signal and provides higher hiding capacity with lower distortion. To further increase the security of the image hiding process, the image to be hidden is divided into blocks and the bits of each block are XORed with a different random sequence of logistic maps using hopping technique. The performance of the proposed algorithm has been estimated extensively against attacks and experimental results show that the proposed method achieves good robustness and imperceptibility.
Transform based image steganography methods are commonly used in security applications. However, the application of several recent transforms for image steganography remains unexplored. This paper presents bit-plane based steganography method using different transforms. In this work, the bit-plane of the transform coefficients is selected to embed the secret message. The characteristics of four transforms used in the steganography have been analyzed and the results of the four transforms are compared. This has been proven in the experimental results.
The modular multilevel converter with series and parallel connectivity was shown to provide advantages in several industrial applications. Its reliability largely depends on the absence of failures in the power semiconductors. We propose and analyze a fault-diagnosis technique to identify shorted switches based on features generated through wavelet transform of the converter output and subsequent classification in support vector machines. The multi-class support vector machine is trained with multiple recordings of the output of each fault condition as well as the converter under normal operation. Simulation results reveal that the proposed method has high classification latency and high robustness. Except for the monitoring of the output, which is required for the converter control in any case, this method does not require additional module sensors.