Biblio

The Internet of Things leads to the inter-connectivity of a wide range of devices. This heterogeneity of hardware and software poses significant challenges to security. Constrained IoT devices often do not have enough resources to carry the overhead of an intrusion protection system or complex security protocols. A typical initial step in network security is a network scan in order to find vulnerable nodes. In the context of IoT, the initiator of the scan can be particularly interested in finding constrained devices, assuming that they are easier targets. In IoT networks hosting devices of various types, performing a scan with a high discovery rate can be a challenging task, since low-power networks such as IEEE 802.15.4 are easily overloaded. In this paper, we propose an approach to increase the efficiency of network scans by combining them with active network measurements. The measurements allow the scanner to differentiate IoT nodes by the used network technology. We show that the knowledge gained from this differentiation can be used to control the scan strategy in order to reduce probe losses.

Identity masking methods have been developed in recent years for use in multiple applications aimed at protecting privacy. There is only limited work, however, targeted at evaluating effectiveness of methods-with only a handful of studies testing identity masking effectiveness for human perceivers. Here, we employed human participants to evaluate identity masking algorithms on video data of drivers, which contains subtle movements of the face and head. We evaluated the effectiveness of the “personalized supervised bilinear regression method for Facial Action Transfer (FAT)” de-identification algorithm. We also evaluated an edge-detection filter, as an alternate “fill-in” method when face tracking failed due to abrupt or fast head motions. Our primary goal was to develop methods for humanbased evaluation of the effectiveness of identity masking. To this end, we designed and conducted two experiments to address the effectiveness of masking in preventing recognition and in preserving action perception. 1- How effective is an identity masking algorithm?We conducted a face recognition experiment and employed Signal Detection Theory (SDT) to measure human accuracy and decision bias. The accuracy results show that both masks (FAT mask and edgedetection) are effective, but that neither completely eliminated recognition. However, the decision bias data suggest that both masks altered the participants' response strategy and made them less likely to affirm identity. 2- How effectively does the algorithm preserve actions? We conducted two experiments on facial behavior annotation. Results showed that masking had a negative effect on annotation accuracy for the majority of actions, with differences across action types. Notably, the FAT mask preserved actions better than the edge-detection mask. To our knowledge, this is the first study to evaluate a deidentification method aimed at preserving facial ac- ions employing human evaluators in a laboratory setting.

In this paper, we propose a scheme to protect the Software Defined Network(SDN) controller from Distributed Denial-of-Service(DDoS) attacks. We first predict the amount of new requests for each openflow switch periodically based on Taylor series, and the requests will then be directed to the security gateway if the prediction value is beyond the threshold. The requests that caused the dramatic decrease of entropy will be filtered out and rules will be made in security gateway by our algorithm; the rules of these requests will be sent to the controller. The controller will send the rules to each switch to make them direct the flows matching with the rules to the honey pot. The simulation shows the averages of both false positive and false negative are less than 2%.

Software systems nowadays communicate via a number of complex languages. This is often the cause of security vulnerabilities like arbitrary code execution, or injections. Whereby injections such as cross-site scripting are widely known from textual languages such as HTML and JSON that constantly gain more popularity. These systems use parsers to read input and unparsers write output, where these security vulnerabilities arise. Therefore correct parsing and unparsing of messages is of the utmost importance when developing secure and reliable systems. Part of the challenge developers face is to correctly encode data during unparsing and decode it during parsing. This paper presents McHammerCoder, an (un)parser and encoding generator supporting textual and binary languages. Those (un)parsers automatically apply the generated encoding, that is derived from the language's grammar. Therefore manually defining and applying encoding is not required to effectively prevent injections when using McHammerCoder. By specifying the communication language within a grammar, McHammerCoder provides developers with correct input and output handling code for their custom language.

Performing large-scale malware classification is increasingly becoming a critical step in malware analytics as the number and variety of malware samples is rapidly growing. Statistical machine learning constitutes an appealing method to cope with this increase as it can use mathematical tools to extract information out of large-scale datasets and produce interpretable models. This has motivated a surge of scientific work in developing machine learning methods for detection and classification of malicious executables. However, an optimal method for extracting the most informative features for different malware families, with the final goal of malware classification, is yet to be found. Fortunately, neural networks have evolved to the state that they can surpass the limitations of other methods in terms of hierarchical feature extraction. Consequently, neural networks can now offer superior classification accuracy in many domains such as computer vision and natural language processing. In this paper, we transfer the performance improvements achieved in the area of neural networks to model the execution sequences of disassembled malicious binaries. We implement a neural network that consists of convolutional and feedforward neural constructs. This architecture embodies a hierarchical feature extraction approach that combines convolution of n-grams of instructions with plain vectorization of features derived from the headers of the Portable Executable (PE) files. Our evaluation results demonstrate that our approach outperforms baseline methods, such as simple Feedforward Neural Networks and Support Vector Machines, as we achieve 93% on precision and recall, even in case of obfuscations in the data.

With the development of the information and communications technology, new network architecture and applications keep emerging promoted by cloud computing, big data, virtualization technology, etc. As a novel network architecture, Software Defined Network (SDN) realizes separation of the control plane and the data plane, thus controlling hardware by a software platform which is known as the central controller. Through that method SDN realizes the flexible deployment of network resources. In the process of the development and application of SDN, its open architecture has exposed more and more security problem, which triggers a critical focus on how to build a secure SDN. Based on the hierarchical SDN architecture and characteristics, this paper analyzes the security threats that SDN may face in the application layer, the control layer, the resource layer and the interface layer. In order to solve those security threats, the paper presents an SDN security architecture which can provide corresponding defense ability. The paper also puts forward an enhanced access control strategy adopting an attribute-based encryption method in the SDN security architecture.

The majority of business activity of our integrated and connected world takes place in networks based on cloud computing infrastructure that cross national, geographic and jurisdictional boundaries. Such an efficient entity interconnection is made possible through an emerging networking paradigm, Software Defined Networking (SDN) that intends to vastly simplify policy enforcement and network reconfiguration in a dynamic manner. However, despite the obvious advantages this novel networking paradigm introduces, its increased attack surface compared to traditional networking deployments proved to be a thorny issue that creates skepticism when safety-critical applications are considered. Especially when SDN is used to support Internet-of-Things (IoT)-related networking elements, additional security concerns rise, due to the elevated vulnerability of such deployments to specific types of attacks and the necessity of inter-cloud communication any IoT application would require. The overall number of connected nodes makes the efficient monitoring of all entities a real challenge, that must be tackled to prevent system degradation and service outage. This position paper provides an overview of common security issues of SDN when linked to IoT clouds, describes the design principals of the recently introduced Blockchain paradigm and advocates the reasons that render Blockchain as a significant security factor for solutions where SDN and IoT are involved.

The majority of business activity of our integrated and connected world takes place in networks based on cloud computing infrastructure that cross national, geographic and jurisdictional boundaries. Such an efficient entity interconnection is made possible through an emerging networking paradigm, Software Defined Networking (SDN) that intends to vastly simplify policy enforcement and network reconfiguration in a dynamic manner. However, despite the obvious advantages this novel networking paradigm introduces, its increased attack surface compared to traditional networking deployments proved to be a thorny issue that creates skepticism when safety-critical applications are considered. Especially when SDN is used to support Internet-of-Things (IoT)-related networking elements, additional security concerns rise, due to the elevated vulnerability of such deployments to specific types of attacks and the necessity of inter-cloud communication any IoT application would require. The overall number of connected nodes makes the efficient monitoring of all entities a real challenge, that must be tackled to prevent system degradation and service outage. This position paper provides an overview of common security issues of SDN when linked to IoT clouds, describes the design principals of the recently introduced Blockchain paradigm and advocates the reasons that render Blockchain as a significant security factor for solutions where SDN and IoT are involved.

This paper outlines a demonstration of the work carried out in the SoCoRo project investigating how far a neuro-typical population recognises facial expressions on a non-naturalistic robot face that are designed to show approval and disapproval. RFID-tagged objects are presented to an Emys robot head (called Alyx) and Alyx reacts to each with a facial expression. Participants are asked to put the object in a box marked 'Like' or 'Dislike'. This study is being extended to include assessment of participants' Autism Quotient using a validated questionnaire as a step towards using a robot to help train high-functioning adults with an Autism Spectrum Disorder in social signal recognition.

Advanced Metering Infrastructure (AMI) forms a communication network for the collection of power data from smart meters in Smart Grid. As the communication within an AMI needs to be secure, key management becomes an issue due to overhead and limited resources. While using public-keys eliminate some of the overhead of key management, there is still challenges regarding certificates that store and certify the public-keys. In particular, distribution and storage of certificate revocation list (CRL) is major a challenge due to cost of distribution and storage in AMI networks which typically consist of wireless multi-hop networks. Motivated by the need of keeping the CRL distribution and storage cost effective and scalable, in this paper, we present a distributed CRL management model utilizing the idea of distributed hash trees (DHTs) from peer-to-peer (P2P) networks. The basic idea is to share the burden of storage of CRLs among all the smart meters by exploiting the meshing capability of the smart meters among each other. Thus, using DHTs not only reduces the space requirements for CRLs but also makes the CRL updates more convenient. We implemented this structure on ns-3 using IEEE 802.11s mesh standard as a model for AMI and demonstrated its superior performance with respect to traditional methods of CRL management through extensive simulations.

The chips in working state have electromagnetic energy leakage problem. We offer a method to analyze the problem of electromagnetic leakage when the chip is running. We execute a sequence of addition and subtraction arithmetic instructions on FPGA chip, then we use the near-field probe to capture the chip leakage of electromagnetic signals. The electromagnetic signal is collected for analysis and processing, the parts of addition and subtraction are classified and identified by SVM. In this paper, for the problem of electromagnetic leakage, six sets of data were collected for analysis and processing. Good results were obtained by using this method.

Over the past few years we have articulated theory that describes ‘encrypted computing’, in which data remains in encrypted form while being worked on inside a processor, by virtue of a modified arithmetic. The last two years have seen research and development on a standards-compliant processor that shows that near-conventional speeds are attainable via this approach. Benchmark performance with the US AES-128 flagship encryption and a 1GHz clock is now equivalent to a 433MHz classic Pentium, and most block encryptions fit in AES's place. This summary article details how user data is protected by a system based on the processor from being read or interfered with by the computer operator, for those computing paradigms that entail trust in data-oriented computation in remote locations where it may be accessible to powerful and dishonest insiders. We combine: (i) the processor that runs encrypted; (ii) a slightly modified conventional machine code instruction set architecture with which security is achievable; (iii) an ‘obfuscating’ compiler that takes advantage of its possibilities, forming a three-point system that provably provides cryptographic "semantic security" for user data against the operator and system insiders.

Due to its low cost and availability, magnetic sensors nowadays are often incorporated into security systems to detect or localize threats. This paper, with the help of a correlated pre-published work, describes preliminary steps to ensure reliable results that could help in reducing inaccuracies/ errors in case of considering a security system that detects Magnetic IEDs employing AMR-based magnetic field sensors.

Cognitive radio network (CRN) is regarded as an emerging technology for better spectrum efficiency where unlicensed secondary users (SUs) sense RF spectrum to find idle channels and access them opportunistically without causing any harmful interference to licensed primary users (PUs). However, RF spectrum sensing and sharing along with reconfigurable capabilities of SUs bring severe security vulnerabilities in the network. In this paper, we analyze physical-layer security (secrecy rates) of SUs in CRN in the presence of eavesdroppers, jammers and PU emulators (PUEs) where SUs compete not only with jammers and eavesdroppers who are trying to reduce SU's secrecy rates but also against PUEs who are trying to compel the SUs from their current channel by imitating the behavior of PUs. In addition, a legitimate SU competes with other SUs with a sharing attitude for dynamic spectrum access to gain a high secrecy rate, however, the malicious users (i.e., attackers) attempt to abuse the channels egotistically. The main contribution of this work is the design of a game theoretic approach to maximize utilities (that is proportional to secrecy rates) of SUs in the presence of eavesdroppers, jammers and PUEs. Furthermore, SUs use signal energy and cyclostationary feature detection along with location verification technique to detect PUEs. As the proposed approach is generic and considers different attackers, it can be particularized to a situation with eavesdroppers only, jammers only or PUEs only while evaluating physical-layer security of SUs in CRN. We evaluate the performance of the proposed approach using results obtained from simulations. The results show that the proposed approach outperforms other existing methods.

We evaluated the support proposed by the RSO to represent graphically our EAM-ISSRM (Enterprise Architecture Management - Information System Security Risk Management) integrated model. The evaluation of the RSO visual notation has been done at two different levels: completeness with regards to the EAM-ISSRM integrated model (Section III) and cognitive effectiveness, relying on the nine principles established by D. Moody ["The 'Physics' of Notations: Toward a Scientific Basis for Constructing Visual Notations in Software Engineering," IEEE Trans. Softw. Eng., vol. 35, no. 6, pp. 756-779, Nov. 2009] (Section IV). Regarding completeness, the coverage of the EAMISSRM integrated model by the RSO is complete apart from 'Event'. As discussed in Section III, this lack is negligible and we can consider the RSO as an appropriate notation to support the EAM-ISSRM integrated model from a completeness point of view. Regarding cognitive effectiveness, many gaps have been identified with regards to the nine principle established by Moody. Although no quantitative analysis has been performed to objectify this conclusion, the RSO can decently not be considered as an appropriate notation from a cognitive effectiveness point of view and there is room to propose a notation better on this aspect. This paper is focused on assessing the RSO without suggesting improvements based on the conclusions drawn. As a consequence, our objective for future work is to propose a more cognitive effective visual notation for the EAM-ISSRM integrated model. The approach currently considered is to operationalize Moody's principles into concrete metrics and requirements, taking into account the needs and profile of the target group of our notation (information security risk managers) through personas development and user experience map. With such an approach, we will be able to make decisions on the necessary trade-offs about our visual syntax, taking care of a specific context. We also aim at valida- ing our proposal(s) with the help of tools and approaches extracted from cognitive psychology research applied to HCI domain (e.g., eye tracking, heuristic evaluation, user experience evaluation…).

Botnets are a growing threat to the security of data and services on a global level. They exploit vulnerabilities in networks and host machines to harvest sensitive information, or make use of network resources such as memory or bandwidth in cyber-crime campaigns. Bot programs by nature are largely automated and systematic, and this is often used to detect them. In this paper, we extend upon existing work in this area by proposing a network event correlation method to produce graphs of flows generated by botnets, outlining the implementation and functionality of this approach. We also show how this method can be combined with statistical flow-based analysis to provide a descriptive chain of events, and test on public datasets with an overall success rate of 94.1%.

Deep Learning has been proven more effective than conventional machine-learning algorithms in solving classification problem with high dimensionality and complex features, especially when trained with big data. In this paper, a deep learning binomial classifier for Network Intrusion Detection System is proposed and experimentally evaluated using the UNSW-NB15 dataset. Three different experiments were executed in order to determine the optimal activation function, then to select the most important features and finally to test the proposed model on unseen data. The evaluation results demonstrate that the proposed classifier outperforms other models in the literature with 98.99% accuracy and 0.56% false alarm rate on unseen data.

In the production process of embedded device, due to the frequent reuse of third-party libraries or development kits, there are large number of same vulnerabilities that appear in more than one firmware. Homology analysis is often used in detecting this kind of vulnerabilities caused by code reuse or third-party reuse and in the homology analysis, the widely used methods are mainly Binary difference analysis, Normalized compression distance, String feature matching and Fuzz hash. But when we use these methods for homology analysis, we found that the detection result is not ideal and there is a high false positive rate. Focusing on this problem, we analyzed the application scenarios of these four methods and their limitations by combining different methods and different types of files and the experiments show that the combination of methods and files have a better performance in homology analysis.

Summary form only given. Strong light-matter coupling has been recently successfully explored in the GHz and THz [1] range with on-chip platforms. New and intriguing quantum optical phenomena have been predicted in the ultrastrong coupling regime [2], when the coupling strength Ω becomes comparable to the unperturbed frequency of the system ω. We recently proposed a new experimental platform where we couple the inter-Landau level transition of an high-mobility 2DEG to the highly subwavelength photonic mode of an LC meta-atom [3] showing very large Ω/ωc = 0.87. Our system benefits from the collective enhancement of the light-matter coupling which comes from the scaling of the coupling Ω ∝ √n, were n is the number of optically active electrons. In our previous experiments [3] and in literature [4] this number varies from 104-103 electrons per meta-atom. We now engineer a new cavity, resonant at 290 GHz, with an extremely reduced effective mode surface Seff = 4 × 10-14 m2 (FE simulations, CST), yielding large field enhancements above 1500 and allowing to enter the few (\textbackslashtextless;100) electron regime. It consist of a complementary metasurface with two very sharp metallic tips separated by a 60 nm gap (Fig.1(a, b)) on top of a single triangular quantum well. THz-TDS transmission experiments as a function of the applied magnetic field reveal strong anticrossing of the cavity mode with linear cyclotron dispersion. Measurements for arrays of only 12 cavities are reported in Fig.1(c). On the top horizontal axis we report the number of electrons occupying the topmost Landau level as a function of the magnetic field. At the anticrossing field of B=0.73 T we measure approximately 60 electrons ultra strongly coupled (Ω/ω- \textbackslashtextbar\textbackslashtextbar

This paper introduces an ensemble model that solves the binary classification problem by incorporating the basic Logistic Regression with the two recent advanced paradigms: extreme gradient boosted decision trees (xgboost) and deep learning. To obtain the best result when integrating sub-models, we introduce a solution to split and select sets of features for the sub-model training. In addition to the ensemble model, we propose a flexible robust and highly scalable new scheme for building a composite classifier that tries to simultaneously implement multiple layers of model decomposition and outputs aggregation to maximally reduce both bias and variance (spread) components of classification errors. We demonstrate the power of our ensemble model to solve the problem of predicting the outcome of Hearthstone, a turn-based computer game, based on game state information. Excellent predictive performance of our model has been acknowledged by the second place scored in the final ranking among 188 competing teams.

Quantifying vulnerability and security levels for smart grid diversified link of networks have been a challenging task for a long period of time. Security experts and network administrators used to act based on their proficiencies and practices to mitigate network attacks rather than objective metrics and models. This paper uses the Markov Chain Model [1] to evaluate quantitatively the vulnerabilities associated to the 802.11 Wi-Fi network in a smart grid. Administrator can now assess the level of severity of potential attacks based on determining the probability density of the successive states and thus, providing the corresponding security measures. This model is based on the observed vulnerabilities provided by the Common Vulnerabilities and Exposures (CVE) database explored by MITRE [2] to calculate the Markov processes (states) transitions probabilities and thus, deducing the vulnerability level of the entire attack paths in an attack graph. Cumulative probabilities referring to high vulnerability level in a specific attack path will lead the system administrator to apply appropriate security measures a priori to potential attacks occurrence.

Cyber-Physical Systems (CPS) consist of embedded computers with sensing and actuation capability, and are integrated into and tightly coupled with a physical system. Because the physical and cyber components of the system are tightly coupled, cyber-security is important for ensuring the system functions properly and safely. However, the effects of a cyberattack on the whole system may be difficult to determine, analyze, and therefore detect and mitigate. This work presents a model based software development framework integrated with a hardware-in-the-loop (HIL) testbed for rapidly deploying CPS attack experiments. The framework provides the ability to emulate low level attacks and obtain platform specific performance measurements that are difficult to obtain in a traditional simulation environment. The framework improves the cybersecurity design process which can become more informed and customized to the production environment of a CPS. The developed framework is illustrated with a case study of a railway transportation system.