Biblio

The measurement and provision of precise and up-to-date traffic-related key performance indicators is a key element and crucial factor for intelligent traffic control systems in upcoming smart cities. The street network is considered as a highly-dynamic Cyber Physical System (CPS) where measured information forms the foundation for dynamic control methods aiming to optimize the overall system state. Apart from global system parameters like traffic flow and density, specific data, such as velocity of individual vehicles as well as vehicle type information, can be leveraged for highly sophisticated traffic control methods like dynamic type-specific lane assignments. Consequently, solutions for acquiring these kinds of information are required and have to comply with strict requirements ranging from accuracy over cost-efficiency to privacy preservation. In this paper, we present a system for classifying vehicles based on their radio-fingerprint. In contrast to other approaches, the proposed system is able to provide real-time capable and precise vehicle classification as well as cost-efficient installation and maintenance, privacy preservation and weather independence. The system performance in terms of accuracy and resource-efficiency is evaluated in the field using comprehensive measurements. Using a machine learning based approach, the resulting success ratio for classifying cars and trucks is above 99%.

The notion of Cyber Physical Systems is based on using recent computing, communication, and control methods to design and operate intelligent and autonomous systems that can provide using innovative technologies. The existence of several critical applications within the scope of cyber physical systems results in many security and privacy concerns. On the other hand, the distributive nature of these CPS increases security risks. In addition, certain CPS, such as medical ones, generate and process sensitive data regularly, hence, this data must be protected at all levels of generation, processing, and transmission. In this paper, we present a taxonomy based analysis for the state of the art work on security issues in CPS. We identify four types of analysis for security issues in CPS: Modeling, Detection, Prevention, and Response. In addition, we identified six applications of CPS where security is relevant: eHealth and medical, smart grid and power related, vehicular technologies, industrial control and manufacturing, autonomous systems and UAVs, and finally IoT related issues. Then we mapped existing works in the literature into these categories.

Cyber Physical System (CPS) is one of the emerging technologies of the day due to its large number of applications. Its applications extends to automotive, commercial, medical, home appliances and manufacturing industries. Mass research is being conducted in this area including design models, signal processing, control system models, communication models and security. One of the most important aspects of these is security and privacy of CPS. There are a number of vulnerabilities and threats that can be used by an attacker to exploit a cyber physical system. This paper provides a brief review of current security threats, vulnerabilities and its solutions for CPS. For the sake of simplicity the security threats have been divided into two classes i.e. control security and information security. Based on this division various attack methods and their possible solutions have been discussed.

Modern automotive architectures are complex and often comprise of hundreds of electronic control units (ECUs). These ECUs provide diverse services including infotainment, telematics, diagnostics, advanced driving assistance, and many others. The availability of such services is mainly attained by the increasing connectivity with the external world, thus expanding the attack surface. In recent years, automotive original equipment manufacturers (OEMs) and ECU suppliers have become cautious of cyber attacks and have begun fortifying the most vulnerable systems, with hardware-based security modules that enable sandboxing, secure boot, secure software updates and end-to-end message authentication. Nevertheless, insecure legacy ECUs are still in-use in modern vehicles due to price and design complexity issues. Legacy ECUs depend on simple microcontrollers, that lack any kind of hardware-based security. This makes it essential to bridge the gap between modern and legacy ECUs through software-based security by which cyber attacks can be mitigated, thus enhancing the security of vehicles. This paper provides one more step towards highly secure vehicles by introducing a lightweight software- based security framework which provides legacy ECUs with software-based virtualization and protection features along with custom security services. We discuss the motivation for pure software-based approaches, explore the various requirements and advantages obtained, and give an initial insight of the design rationale. Furthermore, we provide a proof of concept implementation and evaluation with a demonstrative use case illustrating the importance of such framework in delivering new diagnostics security services to legacy ECUs.

We study a model where a data collector obtains data from users through a payment mechanism to learn the underlying state from the elicited data. The private signal of each user represents her individual knowledge about the state. Through social interactions, each user can also learn noisy versions of her friends' signals, which is called group signals. Based on both her private signal and group signals, each user makes strategic decisions to report a privacy-preserved version of her data to the data collector. We develop a Bayesian game theoretic framework to study the impact of social learning on users' data reporting strategies and devise the payment mechanism for the data collector accordingly. Our findings reveal that, the Bayesian-Nash equilibrium can be in the form of either a symmetric randomized response (SR) strategy or an informative non-disclosive (ND) strategy. A generalized majority voting rule is applied by each user to her noisy group signals to determine which strategy to follow. When a user plays the ND strategy, she reports privacy-preserving data completely based on her group signals, independent of her private signal, which indicates that her privacy cost is zero. Both the data collector and the users can benefit from social learning which drives down the privacy costs and helps to improve the state estimation at a given payment budget. We derive bounds on the minimum total payment required to achieve a given level of state estimation accuracy.

Smart meters enable improvements in electricity distribution system efficiency at some cost in customer privacy. Users with home batteries can mitigate this privacy loss by applying charging policies that mask their underlying energy use. A battery charging policy is proposed and shown to provide universal privacy guarantees subject to a constraint on energy cost. The guarantee bounds our strategy's maximal information leakage from the user to the utility provider under general stochastic models of user energy consumption. The policy construction adapts coding strategies for non-probabilistic permuting channels to this privacy problem.

The confinement of light in three dimensions (3D) is an active research topic in Nanophotonics, since it allows for ultimate control over photons [1]. A powerful tool to this end is a 3D photonic band gap crystal with a tailored defect that acts as a cavity or even a waveguide [2]. When a one-dimensional array of cavities is coupled, an intricate waveguiding system appears, known as a CROW (coupled resonator optical waveguide) [3]. Remarkably, 3D superlattices of coupled cavities that resonate inside a 3D band gap have not been studied to date. Recently, theoretical work has predicted the occurrence of "Cartesian light", wherein light propagates by hopping only in high symmetry directions in space [4]. This represents the optical analog of the Anderson model for spins or electrons that is relevant for neuromorphic computing and may lead to intricate lasing [5].

In this advanced era, it is important to keep up an abnormal state of security for online exchanges. Public Key cryptography assumes an indispensable job in the field of security. Rivest, Shamir and Adleman (RSA) algorithm is being utilized for quite a long time to give online security. RSA is considered as one of the famous Public Key cryptographic algorithm. Nevertheless, a few fruitful assaults are created to break this algorithm because of specific confinements accepted in its derivation. The algorithm's security is principally founded on the issue of factoring large number. If the process factorization is done then, at that point the entire algorithm can end up fragile. This paper presents a methodology which is more secure than RSA algorithm by doing some modifications in it. Public Key exponent n, which is termed as common modulus replaced by phony modulus to avoid the factorization attack and it is constructed by Mersenne prime numbers to provide more efficiency and security. Paper presents a comparative analysis of the proposed algorithm with the conventional RSA algorithm and Dual RSA.

A Unique Object (UNO) is a physical object with unique characteristics that can be measured externally. The usually analogue measurement can be converted into a digital representation - a fingerprint - which uniquely identifies the object. For practical applications it is necessary that measurements can be performed without the need of specialist equipment or complex measurement setup. Furthermore, a UNO should be able to defeat simulation attacks; an attacker may replace the UNO with a device or system that produces the expected measurement. Recently a novel type of UNOs based on Quantum Dots (QDs) and exhibiting unique photo-luminescence properties has been proposed. The uniqueness of these UNOs is based on quantum effects that can be interrogated using a light source and a camera. The so called Quantum Confinement UNO (QCUNO) responds uniquely to different light excitation levels which is exploited for simulation attack protection, as opposed to focusing on features too small to reproduce and therefore difficult to measure. In this paper we describe methods for extraction of fingerprints from the QCUNO. We evaluate our proposed methods using 46 UNOs in a controlled setup. Focus of the evaluation are entropy, error resilience and the ability to detect simulation attacks.

Wireless Sensor Networks (WSNs) utilizes many dedicated sensors for large scale networks in order to record and monitor the conditions over the environment. Cluster-Based Wireless Sensor Networks (CBWSNs) elucidates essential challenges like routing, load balancing, and lifetime of a network and so on. Conversely, security relies a major challenge in CBWSNs by limiting its resources or not forwarding the data to the other clusters. Wireless Sensor Networks utilize different security methods to offer secure information transmission. Encryption of information records transferred into various organizations thus utilizing a very few systems are the normal practices to encourage high information security. For the most part, such encoded data and also the recovery of unique data depend on symmetric or asymmetric key sets. Collectively with the evolution of security advances, unfruitful or unauthorized endeavors have been made by different illicit outsiders to snip the transmitted information and mystery keys deviously, bother the transmission procedure or misshape the transmitted information and keys. Sometimes, the limitations made in the correspondence channel, transmitting and receiving devices might weaken information security and discontinue a critical job to perform. Thus, in this paper we audit the current information security design and key management framework in WSN. Based on this audit and recent security holes, this paper recommends a plausible incorporated answer for secure transmission of information and mystery keys to address these confinements. Thus, consistent and secure clusters is required to guarantee appropriate working of CBWSNs.

Cyber attacks against automobiles have increased over the last decade due to the expansion in attack surfaces. This is the result of modern automobiles having connections such as Bluetooth, WiFi, and other broadband services. While there has been numerous proposed solutions in the literature, none have been widely adopted as maintaining real-time message deliverability in the Controller Area Networks (CAN) outweighs proposed security solutions. Through iterative research, we have developed a solution which mitigates an attacker's impact on the CAN bus by using CAN's inherent features of arbitration, error detection and signaling, and fault confinement mechanism. The solution relies on an access controller and message priority thresholds added to the CAN data-link layer. The results provide no time delay for non-malicious traffic and mitigates bus impact of a subverted node attempting to fabricate messages at an unauthorized priority level.

Cloud computing is not adequately secure due to the currently used traditional trust methods such as global trust model and local trust model. These are prone to security vulnerabilities. This paper introduces a trust model based on the fuzzy mathematics and gray relational theory. Fuzzy mathematics and gray relational analysis (Fuzzy-GRA) aims to improve the poor dynamic adaptability of cloud computing. Fuzzy-GRA platform is used to test and validate the behavior of the model. Furthermore, our proposed model is compared to other known models. Based on the experimental results, we prove that our model has the edge over other existing models.

This paper proposes a triple-layer, high capacity, message security scheme. The first two layers are of a cryptographic nature, whereas the third layer is of a steganographic nature. In the first layer, AES-128 encryption is performed on the secret message. In the second layer, a chaotic logistic map encryption is applied on the output of the first secure layer to increase the security of the scheme. In the third layer of security, a 2D image steganography technique is performed, where the least significant bit (LSB) -embedding is done according to a zigzag pattern in each of the three color planes of the cover image (i.e. RGB). The distinguishing feature of the proposed scheme is that the secret data is hidden in a zigzag manner that cannot be predicted by a third party. Moreover, our scheme achieves higher values of peak signal to noise ratio (PPSNR), mean square error (MSE), the structural similarity index metric (SSIM), normal cross correlation (NCC) and image fidelity (IF) compared to its counterparts form the literature. In addition, a histogram analysis as well as the high achieved capacity are magnificent indicators for a reliable and high capacity steganographic scheme.

The application of line current differential relays (LCDRs) to protect transmission lines has recently proliferated. However, the reliance of LCDRs on digital communication channels has raised growing cyber-security concerns. This paper investigates the impacts of false data injection attacks (FDIAs) on the performance of LCDRs. It also develops coordinated attacks that involve multiple components, including LCDRs, and can cause false line tripping. Additionally, this paper proposes a technique for detecting FDIAs against LCDRs and differentiating them from actual faults in two-terminal lines. In this method, when an LCDR detects a fault, instead of immediately tripping the line, it calculates and measures the superimposed voltage at its local terminal, using the proposed positive-sequence (PS) and negative-sequence (NS) submodules. To calculate this voltage, the LCDR models the protected line in detail and replaces the rest of the system with a Thevenin equivalent that produces accurate responses at the line terminals. Afterwards, remote current measurement is utilized by the PS and NS submodules to compute each sequence's superimposed voltage. A difference between the calculated and the measured superimposed voltages in any sequence reveals that the remote current measurements are not authentic. Thus, the LCDR's trip command is blocked. The effectiveness of the proposed method is corroborated using simulation results for the IEEE 39-bus test system. The performance of the proposed method is also tested using an OPAL real-time simulator.

Biometrics manages the computerized acknowledgment of people dependent on natural and social attributes. The example acknowledgment framework perceives an individual by deciding the credibility of a particular conduct normal for person. The primary rule of biometric framework is recognizable proof and check. A biometric confirmation framework use fingerprints, face, hand geometry, iris, and voice, mark, and keystroke elements of a person to recognize an individual or to check a guaranteed character. Biometrics authentication is a form of identification and access control process which identify individuals in packs that are under reconnaissance. Biometric security system increase in the overall security and individuals no longer have to deal with lost ID Cards or forgotten passwords. It helps much organization to see everyone is at a certain time when something might have happened that needs reviewed. The current issues in biometric system with individuals and many organization facing are personal privacy, expensive, data's may be stolen.

The number of phishing attacks has increased in Latin America, exceeding the operational skills of cybersecurity analysts. The cognitive security application proposes the use of bigdata, machine learning, and data analytics to improve response times in attack detection. This paper presents an investigation about the analysis of anomalous behavior related with phishing web attacks and how machine learning techniques can be an option to face the problem. This analysis is made with the use of an contaminated data sets, and python tools for developing machine learning for detect phishing attacks through of the analysis of URLs to determinate if are good or bad URLs in base of specific characteristics of the URLs, with the goal of provide realtime information for take proactive decisions that minimize the impact of an attack.

IoT based technology are drastically accelerating the informationization development of the power grid system of China that consists of a huge number of power terminal devices interconnected by the network of electric power IoT. However, the networked power terminal equipment oriented cyberspace security has continually become a challenging problem as network attack is continually varying and evolving. In this paper, we concentrate on the security risk of power terminal equipment and their vulnerability based on ATP attack detection and defense. We first analyze the attack mechanism of APT security attack based on power terminal equipment. Based on the analysis of the security and attack of power IoT terminal device, an ontology-based knowledge representation method of power terminal device and its vulnerability is proposed.

Cognitive Radio is a prominent solution for effective spectral resource utilization. The rapidly growing device to device (D2D) communications and the next generation networks urge the cognitive radio networks to facilitate wideband spectrum sensing in order to assure newer spectral opportunities. As Nyquist sampling rates are formidable owing to complexity and cost of the ADCs, compressive sampling approaches are becoming increasingly popular. One such approach exploited in this paper is the Modulated Wideband Converter (MWC) to recover the spectral support. On the multiple measurement vector (MMV) framework provided by the MWC, threshold based Orthogonal Matching Pursuit (OMP) and Sparse Bayesian Learning (SBL) algorithms are employed for support recovery. We develop a Graphical User Interface (GUI) that assists a beginner to simulate the RF front-end of a MWC and thereby enables the user to explore support recovery as a function of Signal to Noise Ratio (SNR), number of measurement vectors and threshold. The GUI enables the user to explore spectrum sensing in DVB-T, 3G and 4G bands and recovers the support using OMP or SBL approach. The results show that the performance of SBL is better than that of OMP at a lower SNR values.

In this paper, a novel method for tomographic microwave imaging based on the Compressive Processing (CP) paradigm is proposed. The retrieval of the dielectric profiles of the scatterers is carried out by efficiently solving both the sampling and the sensing problems suitably formulated under the first order Born approximation. Selected numerical results are presented in order to show the improvements provided by the CP with respect to conventional compressive sensing (CSE) approaches.

Botnets have been a major area of concern in the field of cybersecurity. There have been a lot of research works for detection of botnets. However, everyday cybercriminals are coming up with new ideas to counter the well-known detection methods. One such popular method is domain flux-based botnets in which a large number of domain names are produced using domain generation algorithm. In this paper, we have proposed a robust way of detecting DGA-based botnets using few novel features covering both syntactic and semantic viewpoints. We have used Area under ROC curve as our performance metric since it provides comprehensive information about the performance of binary classifiers at various thresholds. Results show that our approach performs significantly better than the baseline approach. Our proposed method can help in detecting established DGA bots (equipped with extensive features) as well as prospective advanced DGA bots imitating real-world domain names.

The rise in the number of devices joining the Internet of Things (IoT) has created a huge potential for distributed denial of service (DDoS) attacks, especially due to the lack of security in these computationally limited devices. Malicious actors have realized that and managed to turn large sets of IoT devices into botnets under their control. Given this scenario, this work studies botnet architectures identified so far and assesses how they are considered in the few recent defense proposals that consider botnet architectures.

Most serious occurrence of modern malware is Botnet. Botnet is a rapidly evolving problem that is still not well understood and studied. One of the main goals for modern network security is to create adequate techniques for the detection and eventual termination of Botnet threats. The article presents an approach for implementing a host-based Intrusion Detection System for Botnet attack detection. The approach is based on a variation of a genetic algorithm to detect anomalies in a case of attacks. An implementation of the approach and experimental results are presented.

The threats posed by botnets in the cyber-space continues to grow each day and it has become very hard to detect or infiltrate bots given that the botnet developers each day keep changing the propagation and attack techniques. Currently, most of these attacks have been centered on stealing computing energy, theft of personal information and Distributed Denial of Service (DDoS attacks). In this paper, the authors propose a novel technique that uses the Non-Deterministic Polynomial-Time Hardness (NP-Hard Problem) based on the Traveling Salesperson Person (TSP) that depicts that a given bot, bj, is able to visit each host on a network environment, NE, and then it returns to the botmaster in form of instruction(command) through optimal minimization of the hosts that are or may be attacked. Given that bj represents a piece of malicious code and based on TSP-NP Hard Problem which forms part of combinatorial optimization, the authors present an effective approach for the detection of the botnet. It is worth noting that the concentration of this study is basically on the centralized botnet architecture. This holistic approach shows that botnet detection accuracy can be increased with a degree of certainty and potentially decrease the chances of false positives. Nevertheless, a discussion on the possible applicability and implementation has also been given in this paper.

The prevalence of social botnets has increased public distrust of social media networks. Current methods exist for detecting bot activity on Twitter, Reddit, Facebook, and other social media platforms. Most of these detection methods rely upon observing user behavior for a period of time. Unfortunately, the behavior observation period allows time for a botnet to successfully propagate one or many posts before removal. In this paper, we model the post propagation patterns of normal users and social botnets. We prove that a botnet may exploit deterministic propagation actions to elevate a post even with a small botnet population. We propose a probabilistic model which can limit the impact of social media botnets until they can be detected and removed. While our approach maintains expected results for non-coordinated activity, coordinated botnets will be detected before propagation with high probability.

Over the last decade, a technology called Internet of Things (IoT) has been evolving at a rapid pace. It enables the development of endless applications in view of availability of affordable components which provide smart ecosystems. The IoT devices are constrained devices which are connected to the internet and perform sensing tasks. Each device is identified by their unique address and also makes use of the Constrained Application Protocol (CoAP) as one of the main web transfer protocols. It is an application layer protocol which does not maintain secure channels to transfer information. For authentication and end-to-end security, Datagram Transport Layer Security (DTLS) is one of the possible approaches to boost the security aspect of CoAP, in addition to which there are many suggested ways to protect the transmission of sensitive information. CoAP uses DTLS as a secure protocol and UDP as a transfer protocol. Therefore, the attacks on UDP or DTLS could be assigned as a CoAP attack. An attack on DTLS could possibly be launched in a single session and a strong authentication mechanism is needed. Man-In-The-Middle attack is one the peak security issues in CoAP as cited by Request For Comments(RFC) 7252, which encompasses attacks like Sniffing, Spoofing, Denial of Service (DoS), Hijacking, Cross-Protocol attacks and other attacks including Replay attacks and Relay attacks. In this work, a client-server architecture is setup, whose end devices communicate using CoAP. Also, a proxy system was installed across the client side to launch an active interception between the client and the server. The work will further be enhanced to provide solutions to mitigate these attacks.