Biblio

The inherent nature of unattended sensors makes these devices most vulnerable to detection, exploitation, and denial in contested environments. Physical access is often cited as the easiest way to compromise any device or network. A new mechanism for mitigating these types of attacks developed under the Assistant Secretary of Defense for Research and Engineering, ASD(R&E) project, “Smoke Screen in Cyberspace”, was previously demonstrated in a live, over-the-air experiment. Smoke Screen encrypts, slices up, and disburses redundant fragments of files throughout the network. This paper describes enhancements to the disbursement of the file fragments routing improving the efficiency and time to completion of fragment distribution by defining the exact route, fragments should take to the destination. This is the first step in defining a custom protocol for the discovery of participating nodes and the efficient distribution of fragments in a mobile network. Future work will focus on the movement of fragments to avoid traffic analysis and avoid the collection of the entire fragment set that would enable an adversary to reconstruct the original piece of data.

Delay and security are both highly concerned in the Internet of Things (IoT). In this paper, we set up a secure analytical framework for IoT networks to characterize the network delay performance and secrecy performance. Firstly, stochastic geometry and queueing theory are adopted to model the location of IoT devices and the temporal arrival of packets. Based on this model, a low-complexity secure on-off scheme is proposed to improve the network performance. Then, the delay performance and secrecy performance are evaluated in terms of packet delay and packet secrecy outage probability. It is demonstrated that the intensity of IoT devices arouse a tradeoff between the delay and security and the secure on-off scheme can improve the network delay performance and secrecy performance. Moreover, secrecy transmission rate is adopted to reflect the delay-security tradeoff. The analytical and simulation results show the effects of intensity of IoT devices and secure on-off scheme on the network delay performance and secrecy performance.

In this paper, we quantify the effectiveness of third-party tracker blockers on a large scale. First, we analyze the architecture of various state-of-the-art blocking solutions and discuss the advantages and disadvantages of each method. Second, we perform a two-part measurement study on the effectiveness of popular tracker-blocking tools. Our analysis quantifies the protection offered against trackers present on more than 100,000 popular websites and 10,000 popular Android applications. We provide novel insights into the ongoing arms race between trackers and developers of blocking tools as well as which tools achieve the best results under what circumstances. Among others, we discover that rule-based browser extensions outperform learning-based ones, trackers with smaller footprints are more successful at avoiding being blocked, and CDNs pose a major threat towards the future of tracker-blocking tools. Overall, the contributions of this paper advance the field of web privacy by providing not only the largest study to date on the effectiveness of tracker-blocking tools, but also by highlighting the most pressing challenges and privacy issues of third-party tracking.
 

The malicious websites used by drive-by download attacks change their behavior for web client environments. To analyze the behavior of malicious websites, the single-environment analysis cannot obtain sufficient information. Hence, it is difficult to analyze the whole aspect of malicious websites. Also, the code obfuscation and cloaking are used in malicious websites to avoid to be analyzed their behavior. In this paper, we propose an analyzing method that combines decoding of the obfuscation code with dynamic analysis using multi-environment analysis system in order to analyze the behavior of the malicious websites in detail. Furthermore, we present two approaches to improve the multi-environment analysis. The first one is automation of traffic log analysis to reduce the cost of analyzing huge traffic logs between the environments and malicious websites. The second one is multimodal analysis for finding the URL of malicious websites.

This paper investigates the secrecy performance of full-duplex relay mode in underlay cognitive radio networks using decode-and-forward relay selection. The analytical results prove that full-duplex mode can guarantee security under critical conditions such as the bad residual self-interference and the presence of hi-tech eavesdropper. The secrecy outage probability is derived based on the statistical characteristics of channels in this considered system. The system is examined under five circumferences: 1) Different values of primary network's desired outage probability; 2) Different values of primary transmitter's transmit power; 3) Applying of multiple relays selection; 4) Systems undergo path-loss during the transmission process; 5) Systems undergo self-interference in relays. Simulation results are presented to verify the analysis.

This paper investigates physical layer security of non-orthogonal multiple access (NOMA) in cognitive radio (CR) networks. The techniques of NOMA and CR have improved the spectrum efficiency greatly in the traditional networks. Because of the difference in principles of spectrum improving, NOMA and CR can be combined together, i.e. CR NOMA network, and have great potential to improving the spectrum efficiency. However the physical layer security in CR NOMA network is different from any single network of NOMA or CR. We will study the physical layer security in underlay CR NOMA network. Firstly, the wiretap network model is constructed according to the technical characteristics of NOMA and CR. In addition, new exact and asymptotic expressions of the security outage probability are derived and been confirmed by simulation. Ultimately, we have studied the effect of some critical factors on security outage probability after simulation.

A problem in managing the ever growing computer networks nowadays is the analysis of events detected by intrusion detection systems and the classification whether an event was correctly detected or not. When a false positive is detected by the user, changes to the configuration must be made and evaluated before they can be adopted to productive use. This paper describes an approach for a visual analysis framework that integrates the monitoring and analysis of events and the resulting changes on the configuration of detection systems after finding false alarms, together with a preliminary simulation and evaluation of the changes.

Over the last years, the number of rather simple interconnected devices in nonindustrial scenarios (e.g., for home automation) has steadily increased. For ease of use, the overall system security is often neglected. Before the Internet of Things (IoT) reaches the same distribution rate and impact in industrial applications, where security is crucial for success, solutions that combine usability, scalability, and security are required. We develop such a security system, mainly targeting sensor modules equipped with Radio Frequency IDentification (RFID) tags which we leverage to increase the security level. More specifically, we consider a network based on Message Queue Telemetry Transport (MQTT) which is a widely adopted protocol for the IoT.

Security protection is a concern for the Internet of Things (IoT) which performs data exchange autonomously over the internet for remote monitoring, automation and other applications. IoT implementations has raised concerns over its security and various research has been conducted to find an effective solution for this. Thus, this work focus on the analysis of an asymmetric encryption scheme, AA-Beta (AAβ) on a platform constrained in terms of processor capability, storage and random access Memory (RAM). For this work, the platform focused is ARM Cortex-M7 microcontroller. The encryption and decryption's performance on the embedded microcontroller is realized and time executed is measured. By enabled the I-Cache (Instruction cache) and D-Cache (Data Cache), the performances are 50% faster compared to disabled the D-Cache and I-Cache. The performance is then compared to our previous work on System on Chip (SoC). This is to analyze the gap of the SoC that has utilized the full GNU Multiple Precision Arithmetic Library (GMP) package versus ARM Cortex-M7 that using the mini-gmp package in term of the footprint and the actual performance.

The rapid increase of connected devices and the major advances in information and communication technologies have led to great emergence in the Internet of Things (IoT). IoT devices require software adaptation as they are in continuous transition. Multi-agent based solutions offer adaptable composition for IoT systems. Mobile agents can also be used to enable interoperability and global intelligence with smart objects in the Internet of Things. The use of agents carrying personal data and the rapid increasing number of connected IoT devices require the use of security protocols to secure the user data. Elliptic Curve Cryptography (ECC) Algorithm has emerged as an attractive and efficient public-key cryptosystem. We recommend the use of ECC in the proposed Broadcast based Secure Mobile Agent Protocol (BROSMAP) which is one of the most secure protocols that provides confidentiality, authentication, authorization, accountability, integrity and non-repudiation. We provide a methodology to improve BROSMAP to fulfill the needs of Multi-agent based IoT Systems in general. The new BROSMAP performs better than its predecessor and provides the same security requirements. We have formally verified ECC-BROSMAP using Scyther and compared it with BROSMAP in terms of execution time and computational cost. The effect of varying the key size on BROSMAP is also presented. A new ECC-based BROSMAP takes half the time of Rivest-Shamir-Adleman (RSA) 2048 BROSMAP and 4 times better than its equivalent RSA 3072 version. The computational cost was found in favor of ECC-BROSMAP which is more efficient by a factor of 561 as compared to the RSA-BROSMAP.

The complexity, multiplicity, and impact of cyber-attacks have been increasing at an alarming rate despite the significant research and development investment in cyber security products and tools. The current techniques to detect and protect cyber infrastructures from these smart and sophisticated attacks are mainly characterized as being ad hoc, manual intensive, and too slow. We present in this paper AIM-PSC that is developed jointly by researchers at AVIRTEK and The University of Arizona Center for Cloud and Autonomic Computing that is inspired by biological systems, which can efficiently handle complexity, dynamism and uncertainty. In AIM-PSC system, an online monitoring and multi-level analysis are used to analyze the anomalous behaviors of networks, software systems and applications. By combining the results of different types of analysis using a statistical decision fusion approach we can accurately detect any types of cyber-attacks with high detection and low false alarm rates and proactively respond with corrective actions to mitigate their impacts and stop their propagation.

Most of the social media platforms generate a massive amount of raw data that is slow-paced. On the other hand, Internet Relay Chat (IRC) protocol, which has been extensively used by hacker community to discuss and share their knowledge, facilitates fast-paced and real-time text communications. Previous studies of malicious IRC behavior analysis were mostly either offline or batch processing. This results in a long response time for data collection, pre-processing, and threat detection. However, since the threats can use the latest vulnerabilities to exploit systems (e.g. zero-day attack) and which can spread fast using IRC channels. Current IRC channel monitoring techniques cannot provide the required fast detection and alerting. In this paper, we present an alternative approach to overcome this limitation by providing real-time and autonomic threat detection in IRC channels. We demonstrate the capabilities of our approach using as an example the shadow brokers' leak exploit (the exploit leveraged by WannaCry ransomware attack) that was captured and detected by our framework.

The Internet of Things (IoT) will connect not only computers and mobile devices, but it will also interconnect smart buildings, houses, and cities, as well as electrical grids, gas plants, and water networks, automobiles, airplanes, etc. IoT will lead to the development of a wide range of advanced information services that are pervasive, cost-effective, and can be accessed from anywhere and at any time. However, due to the exponential number of interconnected devices, cyber-security in the IoT is a major challenge. It heavily relies on the digital identity concept to build security mechanisms such as authentication and authorization. Current centralized identity management systems are built around third party identity providers, which raise privacy concerns and present a single point of failure. In addition, IoT unconventional characteristics such as scalability, heterogeneity and mobility require new identity management systems to operate in distributed and trustless environments, and uniquely identify a particular device based on its intrinsic digital properties and its relation to its human owner. In order to deal with these challenges, we present a Blockchain-based Identity Framework for IoT (BIFIT). We show how to apply our BIFIT to IoT smart homes to achieve identity self-management by end users. In the context of smart home, the framework autonomously extracts appliances signatures and creates blockchain-based identifies for their appliance owners. It also correlates appliances signatures (low level identities) and owners identifies in order to use them in authentication credentials and to make sure that any IoT entity is behaving normally.

As the use of wireless technologies increases significantly due to ease of deployment, cost-effectiveness and the increase in bandwidth, there is a critical need to make the wireless communications secure, and resilient to attacks or faults (malicious or natural). Wireless communications are inherently prone to cyberattacks due to the open access to the medium. While current wireless protocols have addressed the privacy issues, they have failed to provide effective solutions against denial of service attacks, session hijacking and jamming attacks. In this paper, we present a resilient wireless communication architecture based on Moving Target Defense, and Software Defined Radios (SDRs). The approach achieves its resilient operations by randomly changing the runtime characteristics of the wireless communications channels between different wireless nodes to make it extremely difficult to succeed in launching attacks. The runtime characteristics that can be changed include packet size, network address, modulation type, and the operating frequency of the channel. In addition, the lifespan for each configuration will be random. To reduce the overhead in switching between two consecutive configurations, we use two radio channels that are selected at random from a finite set of potential channels, one will be designated as an active channel while the second acts as a standby channel. This will harden the wireless communications attacks because the attackers have no clue on what channels are currently being used to exploit existing vulnerability and launch an attack. The experimental results and evaluation show that our approach can tolerate a wide range of attacks (Jamming, DOS and session attacks) against wireless networks.

To overcome the current cybersecurity challenges of protecting our cyberspace and applications, we present an innovative cloud-based architecture to offer resilient Dynamic Data Driven Application Systems (DDDAS) as a cloud service that we refer to as resilient DDDAS as a Service (rDaaS). This architecture integrates Service Oriented Architecture (SOA) and DDDAS paradigms to offer the next generation of resilient and agile DDDAS-based cyber applications, particularly convenient for critical applications such as Battle and Crisis Management applications. Using the cloud infrastructure to offer resilient DDDAS routines and applications, large scale DDDAS applications can be developed by users from anywhere and by using any device (mobile or stationary) with the Internet connectivity. The rDaaS provides transformative capabilities to achieve superior situation awareness (i.e., assessment, visualization, and understanding), mission planning and execution, and resilient operations.

The Internet of Things (IoT) connects not only computers and mobile devices, but it also interconnects smart buildings, homes, and cities, as well as electrical grids, gas, and water networks, automobiles, airplanes, etc. However, IoT applications introduce grand security challenges due to the increase in the attack surface. Current security approaches do not handle cybersecurity from a holistic point of view; hence a systematic cybersecurity mechanism needs to be adopted when designing IoTbased applications. In this work, we present a risk management framework to deploy secure IoT-based applications for Smart Infrastructures at the design time and the runtime. At the design time, we propose a risk management method that is appropriate for smart infrastructures. At the design time, our framework relies on the Anomaly Behavior Analysis (ABA) methodology enabled by the Autonomic Computing paradigm and an intrusion detection system to detect any threat that can compromise IoT infrastructures by. Our preliminary experimental results show that our framework can be used to detect threats and protect IoT premises and services.

Smaller feature size, lower supply voltage, and faster clock rates have made modern computer systems more susceptible to faults. Although previous fault tolerance techniques usually target a relatively low fault rate and consider error recovery less critical, with the advent of higher fault rates, recovery overhead is no longer negligible. In this paper, we propose a scheme that leverages and revises a set of compiler optimizations to design, for each application hotspot, a smart recovery plan that identifies the minimal set of instructions to be re-executed in different fault scenarios. Such fault scenario and recovery plan information is efficiently delivered to the processor for runtime fault recovery. The proposed optimizations are implemented in LLVM and GEM5. The results show that the proposed scheme can significantly reduce runtime recovery overhead by 72%.

Encryption ransomware is a malicious software that stealthily encrypts user files and demands a ransom to provide access to these files. Several prior studies have developed systems to detect ransomware by monitoring the activities that typically occur during a ransomware attack. Unfortunately, by the time the ransomware is detected, some files already undergo encryption and the user is still required to pay a ransom to access those files. Furthermore, ransomware variants can obtain kernel privilege, which allows them to terminate software-based defense systems, such as anti-virus. While periodic backups have been explored as a means to mitigate ransomware, such backups incur storage overheads and are still vulnerable as ransomware can obtain kernel privilege to stop or destroy backups. Ideally, we would like to defend against ransomware without relying on software-based solutions and without incurring the storage overheads of backups. To that end, this paper proposes FlashGuard, a ransomware tolerant Solid State Drive (SSD) which has a firmware-level recovery system that allows quick and effective recovery from encryption ransomware without relying on explicit backups. FlashGuard leverages the observation that the existing SSD already performs out-of-place writes in order to mitigate the long erase latency of flash memories. Therefore, when a page is updated or deleted, the older copy of that page is anyway present in the SSD. FlashGuard slightly modifies the garbage collection mechanism of the SSD to retain the copies of the data encrypted by ransomware and ensure effective data recovery. Our experiments with 1,447 manually labeled ransomware samples show that FlashGuard can efficiently restore files encrypted by ransomware. In addition, we demonstrate that FlashGuard has a negligible impact on the performance and lifetime of the SSD.

Recently, scaling down dynamic random access memory (DRAM) has become more of a challenge, with more faults than before and a significant degradation in yield. To improve the yield in DRAM, a redundancy repair technique with intra-subarray replacement has been extensively employed to replace faulty elements (i.e., rows or columns with defective cells) with spare elements in each subarray. Unfortunately, such technique cannot efficiently handle a biased distribution of faulty cells because each subarray has a fixed number of spare elements. In this article, we propose a novel redundancy repair technique that uses a hashing method to solve this problem. Our hashing technique reorganizes replacement regions by changing the way in which their replacement information is referred, thus making faulty cells become evenly distributed to the regions. We also propose a fast repair algorithm to find the best hash function among all possible candidates. Even if our approach requires little hardware overhead, it significantly improves the yield when compared with conventional redundancy techniques. In particular, the results of our experiment show that our technique saves spare elements by about 57% and 55% for a yield of 99% at BER 1e-6 and 5e-7, respectively.

Community question answering (cQA) has become an important issue due to the popularity of cQA archives on the Web. This paper focuses on addressing the lexical gap problem in question retrieval. Question retrieval in cQA archives aims to find the existing questions that are semantically equivalent or relevant to the queried questions. However, the lexical gap problem brings a new challenge for question retrieval in cQA. In this paper, we propose to model and learn distributed word representations with metadata of category information within cQA pages for question retrieval using two novel category powered models. One is a basic category powered model called MB-NET and the other one is an enhanced category powered model called ME-NET which can better learn the distributed word representations and alleviate the lexical gap problem. To deal with the variable size of word representation vectors, we employ the framework of fisher kernel to transform them into the fixed-length vectors. Experimental results on large-scale English and Chinese cQA data sets show that our proposed approaches can significantly outperform state-of-the-art retrieval models for question retrieval in cQA. Moreover, we further conduct our approaches on large-scale automatic evaluation experiments. The evaluation results show that promising and significant performance improvements can be achieved.

Many modern defenses rely on address space layout randomization (ASLR) to efficiently hide security-sensitive metadata in the address space. Absent implementation flaws, an attacker can only bypass such defenses by repeatedly probing the address space for mapped (security-sensitive) regions, incurring a noisy application crash on any wrong guess. Recent work shows that modern applications contain idioms that allow the construction of crash-resistant code primitives, allowing an attacker to efficiently probe the address space without causing any visible crash. In this paper, we classify different crash-resistant primitives and show that this problem is much more prominent than previously assumed. More specifically, we show that rather than relying on labor-intensive source code inspection to find a few "hidden" application-specific primitives, an attacker can find such primitives semi-automatically, on many classes of real-world programs, at the binary level. To support our claims, we develop methods to locate such primitives in real-world binaries. We successfully identified 29 new potential primitives and constructed proof-of-concept exploits for four of them.

GENI (Global Environment for Network Innovations) is a National Science Foundation (NSF) funded program which provides a virtual laboratory for networking and distributed systems research and education. It is well suited for exploring networks at a scale, thereby promoting innovations in network science, security, services and applications. GENI allows researchers obtain compute resources from locations around the United States, connect compute resources using 100G Internet2 L2 service, install custom software or even custom operating systems on these compute resources, control how network switches in their experiment handle traffic flows, and run their own L3 and above protocols. GENI architecture incorporates cloud federation. With the federation, cloud resources can be federated and/or community of clouds can be formed. The heart of federation is user identity and an ability to “advertise” cloud resources into community including compute, storage, and networking. GENI administrators can carve out what resources are available to the community and hence a portion of GENI resources are reserved for internal consumption. GENI architecture also provides “stitching” of compute and storage resources researchers request. This provides L2 network domain over Internet2's 100G network. And researchers can run their Software Defined Networking (SDN) controllers on the provisioned L2 network domain for a complete control of networking traffic. This capability is useful for large science data transfer (bypassing security devices for high throughput). Renaissance Computing Institute (RENCI), a research institute in the state of North Carolina, has developed ORCA (Open Resource Control Architecture), a GENI control framework. ORCA is a distributed resource orchestration system to serve science experiments. ORCA provides compute resources as virtual machines and as well as baremetals. ORCA based GENI ra- k was designed to serve both High Throughput Computing (HTC) and High Performance Computing (HPC) type of computes. Although, GENI is primarily used in various universities and research entities today, GENI architecture can be leveraged in the commercial, aerospace and government settings. This paper will go over the architecture of GENI and discuss the GENI architecture for scientific computing experiments.

Machine learning has been widely used and achieved considerable results in various research areas. On the other hand, machine learning becomes a big threat when malicious attackers make use it for the wrong purpose. As such a threat, self-evolving botnets have been considered in the past. The self-evolving botnets autonomously predict vulnerabilities by implementing machine learning with computing resources of zombie computers. Furthermore, they evolve based on the vulnerability, and thus have high infectivity. In this paper, we consider several models of Markov chains to counter the spreading of the self-evolving botnets. Through simulation experiments, this paper shows the behaviors of these models.

The manufacturing process of electrical machines influences the geometric dimensions and material properties, e.g. the yoke thickness. These influences occur by statistical variation as manufacturing tolerances. The effect of these tolerances and their potential impact on the mechanical torque output is not fully studied up to now. This paper conducts a sensitivity analysis for geometric and material parameters. For the general approach these parameters are varied uniformly in a range of 10 %. Two dimensional finite element analysis is used to simulate the influences at three characteristic operating points. The studied object is an internal permanent magnet machine in the 100 kW range used for hybrid drive applications. The results show a significant dependency on the rotational speed. The general validity is studied by using boundary condition variations and two further machine designs. This procedure offers the comparison of matching qualitative results for small quantitative deviations. For detecting the impact of the manufacturing process realistic tolerance ranges are used. This investigation identifies the airgap and magnet remanence induction as the main parameters for potential torque fluctuation.

This paper presents the Scanning, Vulnerabilities, Exploits and Detection tool (SVED). SVED facilitates reliable and repeatable cyber security experiments by providing a means to design, execute and log malicious actions, such as software exploits, as well the alerts provided by intrusion detection systems. Due to its distributed architecture, it is able to support large experiments with thousands of attackers, sensors and targets. SVED is automatically updated with threat intelligence information from various services.