Biblio

Establishing trust relationships between routing nodes represents a vital security requirement to establish reliable routing processes that exclude infected or selfish nodes. In this paper, we propose a new security scheme for the Internet of things and mainly for the RPL (Routing Protocol for Low-power and Lossy Networks) called: Metric-based RPL Trustworthiness Scheme (MRTS). The primary aim is to enhance RPL security and deal with the trust inference problem. MRTS addresses trust issue during the construction and maintenance of routing paths from each node to the BR (Border Router). To handle this issue, we extend DIO (DODAG Information Object) message by introducing a new trust-based metric ERNT (Extended RPL Node Trustworthiness) and a new Objective Function TOF (Trust Objective Function). In fact, ERNT represents the trust values for each node within the network, and TOF demonstrates how ERNT is mapped to path cost. In MRTS all nodes collaborate to calculate ERNT by taking into account nodes' behavior including selfishness, energy, and honesty components. We implemented our scheme by extending the distributed Bellman-Ford algorithm. Evaluation results demonstrated that the new scheme improves the security of RPL.

Internet of Thing (IoT) provide services by linking the different platform devices. They have the limitation in providing intelligent service. The IoT devices are heterogeneous which includes wireless sensors to less resource constrained devices. These devices are prone to hardware/software and network attacks. If not properly secured, it may lead to security issues like privacy and confidentiality. To resolve the above problem, an Intelligent Security Framework for IoT Devices is proposed in this paper. The proposed method is made up of (1) the light weight Asymmetric cryptography for securing the End-To-End devices which protects the IoT service gateway and the low power sensor nodes and (2) implements Lattice-based cryptography for securing the Broker devices/Gateway and the cloud services. The proposed architecture implements Asymmetric Key Encryption to share session key between the nodes and then uses this session key for message transfer This protects the system from Distributed Denial of Service Attacks, eavesdropping and Quantum algorithm attacks. The proposed protocol uses the unique Device ID of the sensors to generate key pair to establish mutual authentication between Devices and Services. Finally, the Mutual authentication mechanism is implemented in the gateway.

The 6L0WPAN adaptation layer is widely used in many Internet of Things (IoT) and vehicular networking applications. The current IoT framework [1], which introduced 6LoWPAN to the TCP/IP model, does not specif the implementation for managing its received-fragments buffer. This paper looks into the effect of current implementations of buffer management strategies at 6LoWPAN's response in case of fragmentation-based, buffer reservation Denial of Service (DoS) attacks. The Packet Drop Rate (PDR) is used to analyze how successful the attacker is for each management technique. Our investigation uses different defence strategies, which include our implementation of the Split Buffer mechanism [2] and a modified version of this mechanism that we devise in this paper as well. In particular, we introduce dynamic calculation for the average time between consecutive fragments and the use of a list of previously dropped packets tags. NS3 is used to simulate all the implementations. Our results show that using a ``slotted'' buffer would enhance 6LoWPAN's response against these attacks. The simulations also provide an in-depth look at using scoring systems to manage buffer cleanups.

Besides its enormous benefits to the industry and community the Internet of Things (IoT) has introduced unique security challenges to its enablers and adopters. As the trend in cybersecurity threats continue to grow, it is likely to influence IoT deployments. Therefore it is eminent that besides strengthening the security of IoT systems we develop effective digital forensics techniques that when breaches occur we can track the sources of attacks and bring perpetrators to the due process with reliable digital evidence. The biggest challenge in this regard is the heterogeneous nature of devices in IoT systems and lack of unified standards. In this paper we investigate digital forensics from IoT perspectives. We argue that besides traditional digital forensics practices it is important to have application-specific forensics in place to ensure collection of evidence in context of specific IoT applications. We consider top three IoT applications and introduce a model which deals with not just traditional forensics but is applicable in digital as well as application-specific forensics process. We believe that the proposed model will enable collection, examination, analysis and reporting of forensically sound evidence in an IoT application-specific digital forensics investigation.

This paper introduces a multi-factors security key generation mechanism for self-organising Internet of Things (IoT) network and nodes. The mechanism enables users to generate unique set of security keys to enhance IoT security while meeting various business needs. The multi-factor security keys presents an additional security layer to existing security standards and practices currently being adopted by the IoT community. The proposed security key generation mechanism enables user to define and choose any physical and logical parameters he/she prefers, in generating a set of security keys to be encrypted and distributed to registered IoT nodes. IoT applications and services will only be activated after verifying that all security keys are present. Multiple levels of authorisation for different user groups can be easily created through the mix and match of the generated multi-factors security keys. A use case, covering indoor and outdoor field tests was conducted. The results of the tests showed that the mechanism is easily adaptable to meet diverse multivendor IoT devices and is scalable for various applications.

In this paper, we propose and implement CommunityGuard, a system which comprises of intelligent Guardian Nodes that learn and prevent malicious traffic from coming into and going out of a user's personal area network. In the CommunityGuard model, each Guardian Node tells others about emerging threats, blocking these threats for all users as soon as they begin. Furthermore, Guardian Nodes regularly update themselves with latest threat models to provide effective security against new and emerging threats. Our evaluation proves that CommunityGuard provides immunity against a range of incoming and outgoing attacks at all points of time with an acceptable impact on network performance. Oftentimes, the sources of DDoS attack traffic are personal devices that have been compromised without the owner's knowledge. We have modeled CommunityGuard to prevent such outgoing DDoS traffic on a wide scale which can hamstring the otherwise very frightening prospects of crippling DDoS attacks.

The vision of smart environments, systems, and services is driven by the development of the Internet of Things (IoT). IoT devices produce large amounts of data and this data is used to make critical decisions in many systems. The data produced by these devices has to satisfy various security related requirements in order to be useful in practical scenarios. One of these requirements is data provenance which allows a user to trust the data regarding its origin and location. The low cost of many IoT devices and the fact that they may be deployed in unprotected spaces requires security protocols to be efficient and secure against physical attacks. This paper proposes a light-weight protocol for data provenance in the IoT. The proposed protocol uses physical unclonable functions (PUFs) to provide physical security and uniquely identify an IoT device. Moreover, wireless channel characteristics are used to uniquely identify a wireless link between an IoT device and a server/user. A brief security and performance analysis are presented to give a preliminary validation of the protocol.

The focus of this paper is to propose an integration between Internet of Things (IoT) and Video Surveillance, with the aim to satisfy the requirements of the future needs of Video Surveillance, and to accomplish a better use. IoT is a new technology in the sector of telecommunications. It is a network that contains physical objects, items, and devices, which are embedded with sensors and software, thus enabling the objects, and allowing for their data exchange. Video Surveillance systems collect and exchange the data which has been recorded by sensors and cameras and send it through the network. This paper proposes an innovative topology paradigm which could offer a better use of IoT technology in Video Surveillance systems. Furthermore, the contribution of these technologies provided by Internet of Things features in dealing with the basic types of Video Surveillance technology with the aim to improve their use and to have a better transmission of video data through the network. Additionally, there is a comparison between our proposed topology and relevant proposed topologies focusing on the security issue.

There are billions of Internet of things (IoT) devices connecting to the Internet and the number is increasing. As a still ongoing technology, IoT can be used in different fields, such as agriculture, healthcare, manufacturing, energy, retailing and logistics. IoT has been changing our world and the way we live and think. However, IoT has no uniform architecture and there are different kinds of attacks on the different layers of IoT, such as unauthorized access to tags, tag cloning, sybil attack, sinkhole attack, denial of service attack, malicious code injection, and man in middle attack. IoT devices are more vulnerable to attacks because it is simple and some security measures can not be implemented. We analyze the privacy and security challenges in the IoT and survey on the corresponding solutions to enhance the security of IoT architecture and protocol. We should focus more on the security and privacy on IoT and help to promote the development of IoT.

Internet of things (IOT) is a kind of advanced information technology which has drawn societies' attention. Sensors and stimulators are usually recognized as smart devices of our environment. Simultaneously IOT security brings up new issues. Internet connection and possibility of interaction with smart devices cause those devices to involve more in human life. Therefore, safety is a fundamental requirement in designing IOT. IOT has three remarkable features: overall perception, reliable transmission and intelligent processing. Because of IOT span, security of conveying data is an essential factor for system security. Hybrid encryption technique is a new model that can be used in IOT. This type of encryption generates strong security and low computation. In this paper, we have proposed a hybrid encryption algorithm which has been conducted in order to reduce safety risks and enhancing encryption's speed and less computational complexity. The purpose of this hybrid algorithm is information integrity, confidentiality, non-repudiation in data exchange for IOT. Eventually suggested encryption algorithm has been simulated by MATLAB software and its speed and safety efficiency were evaluated in comparison with conventional encryption algorithm.

The Internet of Things (IoT) has become ubiquitous in our daily life as billions of devices are connected through the Internet infrastructure. However, the rapid increase of IoT devices brings many non-traditional challenges for system design and implementation. In this paper, we focus on the hardware security vulnerabilities and ultra-low power design requirement of IoT devices. We briefly survey the existing design methods to address these issues. Then we propose an approximate computing based information hiding approach that provides security with low power. We demonstrate that this security primitive can be applied for security applications such as digital watermarking, fingerprinting, device authentication, and lightweight encryption.

Over the last years, the number of rather simple interconnected devices in nonindustrial scenarios (e.g., for home automation) has steadily increased. For ease of use, the overall system security is often neglected. Before the Internet of Things (IoT) reaches the same distribution rate and impact in industrial applications, where security is crucial for success, solutions that combine usability, scalability, and security are required. We develop such a security system, mainly targeting sensor modules equipped with Radio Frequency IDentification (RFID) tags which we leverage to increase the security level. More specifically, we consider a network based on Message Queue Telemetry Transport (MQTT) which is a widely adopted protocol for the IoT.

Security Evaluation and Management (SEM) is considerably important process to protect the Embedded System (ES) from various kinds of security's exploits. In general, SEM's processes have some challenges, which limited its efficiency. Some of these challenges are system-based challenges like the hetero-geneity among system's components and system's size. Some other challenges are expert-based challenges like mis-evaluation possibility and experts non-continuous availability. Many of these challenges were addressed by the Multi Metric (MM) framework, which depends on experts' or subjective evaluation for basic evaluations. Despite of its productivity, subjective evaluation has some drawbacks (e.g. expert misevaluation) foster the need for considering objective evaluations in the MM framework. In addition, the MM framework is system centric framework, thus, by modelling complex and huge system using the MM framework a guide is needed indicating changes toward desirable security's requirements. This paper proposes extensions for the MM framework consider the usage of objective evaluations and work as guide for needed changes to satisfy desirable security requirements.

The survey of related work in the very specialized field of information security (IS) ensurance for the Internet of Things (IoT) allowed us to work out a taxonomy of typical attacks against the IoT elements (with special attention to the IoT device protection). The key directions of countering these attacks were defined on this basis. According to the modern demand for the IoT big IS-related data processing, the application of Security Intelligence approach is proposed. The main direction of the future research, namely the IoT operational resilience, is indicated.

Smart IoT applications require connecting multiple IoT devices and networks with multiple services running in fog and cloud computing platforms. One approach to connecting IoT devices with cloud and fog services is to create a federated virtual network. The main benefit of this approach is that IoT devices can then interact with multiple remote services using an application specific federated network where no traffic from other applications passes. This federated network spans multiple cloud platforms and IoT networks but it can be managed as a single entity. From the point of view of security, federated virtual networks can be managed centrally and be secured with a coherent global network security policy. This does not mean that the same security policy applies everywhere, but that the different security policies are specified in a single coherent security policy. In this paper we propose to extend a federated cloud networking security architecture so that it can secure IoT devices and networks. The federated network is extended to the edge of IoT networks by integrating a federation agent in an IoT gateway or network controller (Can bus, 6LowPan, Lora, ...). This allows communication between the federated cloud network and the IoT network. The security architecture is based on the concepts of network function virtualisation (NFV) and service function chaining (SFC) for composing security services. The IoT network and devices can then be protected by security virtual network functions (VNF) running at the edge of the IoT network.

Internet of Things (IoT) depicts an intelligent future, where any IoT-based devices having a sensorial and computing capabilities to interact with each other. Recently, we are living in the area of internet and rapidly moving towards a smart planet where devices are capable to be connected to each other. Cooperative ad-hoc vehicle systems are the main driving force for the actualization of IoT-based concept. Vehicular Ad-hoc Network (VANET) is considered as a promising platform for the intelligent wireless communication system. This paper presents and analyzes the tradeoffs between the security and reliability of the IoT-based VANET system in the presence of eavesdropping attacks using smart vehicle relays based on opportunistic relay selection (ORS) scheme. Then, the optimization of the distance between the source (S), destination (D), and Eavesdropper (E) is illustrated in details, showing the effect of this parameter on the IoT-based network. In order to improve the SRT, we quantify the attainable SRT improvement with variable distances between IoT-based nodes. It is shown that given the maximum tolerable Intercept Probability (IP), the Outage Probability (OP) of our proposed model approaches zero for Ge → ∞, where Ge is distance ratio between S — E via the vehicle relay (R).

Link quality protocols employ link quality estimators to collect statistics on the wireless link either independently or cooperatively among the sensor nodes. Furthermore, link quality routing protocols for wireless sensor networks may modify an estimator to meet their needs. Link quality estimators are vulnerable against malicious attacks that can exploit them. A malicious node may share false information with its neighboring sensor nodes to affect the computations of their estimation. Consequently, malicious node may behave maliciously such that its neighbors gather incorrect statistics about their wireless links. This paper aims to detect malicious nodes that manipulate the link quality estimator of the routing protocol. In order to accomplish this task, MINTROUTE and CTP routing protocols are selected and updated with intrusion detection schemes (IDSs) for further investigations with other factors. It is proved that these two routing protocols under scrutiny possess inherent susceptibilities, that are capable of interrupting the link quality calculations. Malicious nodes that abuse such vulnerabilities can be registered through operational detection mechanisms. The overall performance of the new LQR protocol with IDSs features is experimented, validated and represented via the detection rates and false alarm rates.

This paper introduces a design and implementation of a security scheme for the Internet of Things (IoT) based on ECQV Implicit Certificates and Datagram Transport Layer Security (DTLS) protocol. In this proposed security scheme, Elliptic curve cryptography based ECQV implicit certificate plays a key role allowing mutual authentication and key establishment between two resource-constrained IoT devices. We present how IoT devices get ECQV implicit certificates and use them for authenticated key exchange in DTLS. An evaluation of execution time of the implementation is also conducted to assess the efficiency of the solution.

Today 2.9 billion people, or 40% of the world's population are online. By 2020, at least 40 billion more devices will become smart via embedded processors. The impact of such Internet of Things (IoT) on our society will be extraordinary. It will influence most consumer and business sectors, impact education, healthcare and safety. However, it certainly will also pose a challenge from a security point of view. Not only will the devices themselves become more complex, also the interaction between devices, the networks and the variance in topology will grow. Finally, with increasing amounts of data and assets at stake the incentive for attackers will increase. The costs of cyber attacks in such setting are estimated to reach about 2 trillion USD by 2020. Today, the IoT is just beginning to emerge. Unfortunately, when looking at its security, there is lots of room for improvement. Exploits reported at a steady pace clearly suggest that security is a major challenge when the world wants to successfully switch from an IoT hype to a real IoT deployment. Security, and security risk awareness, insufficiently present in today's consumer and developer mindset, are only a starting point. Once the requirement for strong security is widely accepted, there will be still the economical question of who is going to pay for security and its maintenance. Without enforcing certain standards by means of third party evaluation this problem is expected to be hard to get under control.

A key requirement for most security solutions is to provide secure cryptographic key storage in a way that will easily scale in the age of the Internet of Things. In this paper, we focus on providing such a solution based on Physical Unclonable Functions (PUFs). To this end, we focus on microelectromechanical systems (MEMS)-based gyroscopes and show via wafer-level measurements and simulations, that it is feasible to use the physical and electrical properties of these sensors for cryptographic key generation. After identifying the most promising features, we propose a novel quantization scheme to extract bit strings from the MEMS analog measurements. We provide upper and lower bounds for the minimum entropy of the derived bit strings and fully analyze the intra- and inter-class distributions across the operation range of the MEMS device. We complement these measurements via Monte-Carlo simulations based on the distributions of the parameters measured on actual devices. We also propose and evaluate a complete cryptographic key generation chain based on fuzzy extractors. We derive a full entropy 128-bit key using the obtained min-entropy estimates, requiring 1219 bits of helper data with an (authentication) failure probability of 4 . 10-7. In addition, we propose a dedicated MEMS-PUF design, which is superior to our measured sensor, in terms of chip area, quality and quantity of key seed features.