Biblio
The problem of cross-platform binary code similarity detection aims at detecting whether two binary functions coming from different platforms are similar or not. It has many security applications, including plagiarism detection, malware detection, vulnerability search, etc. Existing approaches rely on approximate graph-matching algorithms, which are inevitably slow and sometimes inaccurate, and hard to adapt to a new task. To address these issues, in this work, we propose a novel neural network-based approach to compute the embedding, i.e., a numeric vector, based on the control flow graph of each binary function, then the similarity detection can be done efficiently by measuring the distance between the embeddings for two functions. We implement a prototype called Gemini. Our extensive evaluation shows that Gemini outperforms the state-of-the-art approaches by large margins with respect to similarity detection accuracy. Further, Gemini can speed up prior art's embedding generation time by 3 to 4 orders of magnitude and reduce the required training time from more than 1 week down to 30 minutes to 10 hours. Our real world case studies demonstrate that Gemini can identify significantly more vulnerable firmware images than the state-of-the-art, i.e., Genius. Our research showcases a successful application of deep learning on computer security problems.
VANET network is a new technology on which future intelligent transport systems are based; its purpose is to develop the vehicular environment and make it more comfortable. In addition, it provides more safety for drivers and cars on the road. Therefore, we have to make this technology as secured as possible against many threats. As VANET is a subclass of MANET, it has inherited many security problems but with a different architecture and DOS attacks are one of them. In this paper, we have focused on DOS attacks that prevent users to receive the right information at the right moment. We have analyzed DOS attacks behavior and effects on the network using different mathematical models in order to find an efficient solution.
This paper presents a method to extract important byte sequences in malware samples by application of convolutional neural network (CNN) to images converted from binary data. This method, by combining a technique called the attention mechanism into CNN, enables calculation of an "attention map," which shows regions having higher importance for classification in the image. The extracted region with higher importance can provide useful information for human analysts who investigate the functionalities of unknown malware samples. Results of our evaluation experiment using malware dataset show that the proposed method provides higher classification accuracy than a conventional method. Furthermore, analysis of malware samples based on the calculated attention map confirmed that the extracted sequences provide useful information for manual analysis.
Cryptanalysis (the study of methods to read encrypted information without knowledge of the encryption key) has traditionally been separated into mathematical analysis of weaknesses in cryptographic algorithms, on the one hand, and side-channel attacks which aim to exploit weaknesses in the implementation of encryption and decryption algorithms. Mathematical analysis generally makes assumptions about the algorithm with the aim of reconstructing the key relating plain text to cipher text through brute-force methods. Complexity issues tend to dominate the systematic search for keys. To date, there has been very little research on a third cryptanalysis method: learning the key through convergence based on associations between plain text and cipher text. Recent advances in deep learning using multi-layered artificial neural networks (ANNs) provide an opportunity to reassess the role of deep learning architectures in next generation cryptanalysis methods based on neurocryptography (NC). In this paper, we explore the capability of deep ANNs to decrypt encrypted messages with minimum knowledge of the algorithm. From the experimental results, it can be concluded that DNNs can encrypt and decrypt to levels of accuracy that are not 100% because of the stochastic aspects of ANNs. This aspect may however be useful if communication is under cryptanalysis attack, since the attacker will not know for certain that key K used for encryption and decryption has been found. Also, uncertainty concerning the architecture used for encryption and decryption adds another layer of uncertainty that has no counterpart in traditional cryptanalysis.
Here we explore the applicability of traditional sliding window based convolutional neural network (CNN) detection pipeline and region based object detection techniques such as Faster Region-based CNN (R-CNN) and Region-based Fully Convolutional Networks (R-FCN) on the problem of object detection in X-ray security imagery. Within this context, with limited dataset availability, we employ a transfer learning paradigm for network training tackling both single and multiple object detection problems over a number of R-CNN/R-FCN variants. The use of first-stage region proposal within the Faster RCNN and R-FCN provide superior results than traditional sliding window driven CNN (SWCNN) approach. With the use of Faster RCNN with VGG16, pretrained on the ImageNet dataset, we achieve 88.3 mAP for a six object class X-ray detection problem. The use of R-FCN with ResNet-101, yields 96.3 mAP for the two class firearm detection problem requiring 0.1 second computation per image. Overall we illustrate the comparative performance of these techniques as object localization strategies within cluttered X-ray security imagery.
The Internet of Things (IoT) has bridged our physical world to the cyber world which allows us to achieve our desired lifestyle. However, service security is an essential part to ensure that the designed service is not compromised. In this paper, we proposed a security analysis for IoT services. We focus on the context of detecting malicious operation from an event log of the designed IoT services. We utilized Petri nets with data to model IoT service which is logically correct. Then, we check the trace from an event log by tracking the captured process and data. Finally, we illustrated the approach with a smart home service and showed the effectiveness of our approach.
Dynamic security assessment provides system operators with vital information for possible preventive or emergency control to prevent security problems. In some cases, power system topology change deteriorates intelligent system-based online stability assessment performance. In this paper, we propose a new online assessment scheme to improve classification performance reliability of dynamic transient stability assessment. In the new scheme, we use an intelligent system consisting an ensemble of neural networks based on extreme learning machine. A new feature selection algorithm combining filter type method RRelief-F and wrapper type method Sequential Floating Forward Selection is proposed. Boosting learning algorithm is used in intelligent system training process which leads to higher classification accuracy. Moreover, we propose a new classification rule using weighted outputs of predictors in the ensemble helps to achieve 100% transient stability prediction in our case study.
Dynamic security assessment provides system operators with vital information for possible preventive or emergency control to prevent security problems. In some cases, power system topology change deteriorates intelligent system-based online stability assessment performance. In this paper, we propose a new online assessment scheme to improve classification performance reliability of dynamic transient stability assessment. In the new scheme, we use an intelligent system consisting an ensemble of neural networks based on extreme learning machine. A new feature selection algorithm combining filter type method RRelief-F and wrapper type method Sequential Floating Forward Selection is proposed. Boosting learning algorithm is used in intelligent system training process which leads to higher classification accuracy. Moreover, we propose a new classification rule using weighted outputs of predictors in the ensemble helps to achieve 100% transient stability prediction in our case study.
Complex traffic networks include a number of controlled intersections, and, commonly, multiple districts or municipalities. The result is that the overall traffic control problem is extremely complex computationally. Moreover, given that different municipalities may have distinct, non-aligned, interests, traffic light controller design is inherently decentralized, a consideration that is almost entirely absent from related literature. Both complexity and decentralization have great bearing both on the quality of the traffic network overall, as well as on its security. We consider both of these issues in a dynamic traffic network. First, we propose an effective local search algorithm to efficiently design system-wide control logic for a collection of intersections. Second, we propose a game theoretic (Stackelberg game) model of traffic network security in which an attacker can deploy denial-of-service attacks on sensors, and develop a resilient control algorithm to mitigate such threats. Finally, we propose a game theoretic model of decentralization, and investigate this model both in the context of baseline traffic network design, as well as resilient design accounting for attacks. Our methods are implemented and evaluated using a simple traffic network scenario in SUMO.
Emergency message delivery in packet networks is promising in terms of resiliency to failures and service delivery to handicapped persons. In this paper, we propose an NDN(Named Data Networking)-based emergency message delivery mechanism by leveraging multicasting and ABE (Attribute-Based Encryption) functions.
Bulk electric systems include hundreds of synchronous generators. Faults in such systems can induce oscillations in the generators which if not detected and controlled can destabilize the system. Mode estimation is a popular method for oscillation detection. In this paper, we propose a resilient algorithm to estimate electro-mechanical oscillation modes in large scale power system in the presence of false data. In particular, we add a fault tolerance mechanism to a variant of alternating direction method of multipliers (ADMM) called S-ADMM. We evaluate our method on an IEEE 68-bus test system under different attack scenarios and show that in all the scenarios our algorithm converges well.
The prevalent integration of highly intermittent renewable distributed energy resources (DER) into microgrids necessitates the deployment of a microgrid controller. In the absence of the main electric grid setting the network voltage and frequency, the microgrid power and energy management becomes more challenging, accentuating the need for a centralized microgrid controller that, through communication links, ensures smooth operation of the autonomous system. This extensive reliance on information and communication technologies (ICT) creates potential access points and vulnerabilities that may be exploited by cyber-attackers. This paper first presents a typical microgrid configuration operating in islanded mode; the microgrid elements, primary and secondary control functions for power, energy and load management are defined. The information transferred from the central controller to coordinate and dispatch the DERs is provided along with the deployable communication technologies and protocols. The vulnerabilities arising in such microgrids along with the cyber-attacks exploiting them are described. The impact of these attacks on the microgrid controller functions was shown to be dependent on the characteristics, location and target of the cyber-attack, as well as the microgrid configuration and control. A real-time hardware-in-the loop (HIL) testing platform, which emulates a microgrid featuring renewable DERs, an energy storage system (ESS), a diesel generator and controllable loads was used as the case study in order to demonstrate the impact of various cyber-attacks.
As embedded devices (under the guise of "smart-whatever") rapidly proliferate into many domains, they become attractive targets for malware. Protecting them from software and physical attacks becomes both important and challenging. Remote attestation is a basic tool for mitigating such attacks. It allows a trusted party (verifier) to remotely assess software integrity of a remote, untrusted, and possibly compromised, embedded device (prover). Prior remote attestation methods focus on software (malware) attacks in a one-verifier/one-prover setting. Physical attacks on provers are generally ruled out as being either unrealistic or impossible to mitigate. In this paper, we argue that physical attacks must be considered, particularly, in the context of many provers, e.g., a network, of devices. As- suming that physical attacks require capture and subsequent temporary disablement of the victim device(s), we propose DARPA, a light-weight protocol that takes advantage of absence detection to identify suspected devices. DARPA is resilient against a very strong adversary and imposes minimal additional hardware requirements. We justify and identify DARPA's design goals and evaluate its security and costs.
Riding on the success of SDN for enterprise and data center networks, recently researchers have shown much interest in applying SDN for critical infrastructures. A key concern, however, is the vulnerability of the SDN controller as a single point of failure. In this paper, we develop a cyber-physical simulation platform that interconnects Mininet (an SDN emulator), hardware SDN switches, and PowerWorld (a high-fidelity, industry-strength power grid simulator). We report initial experiments on how a number of representative controller faults may impact the delay of smart grid communications. We further evaluate how this delay may affect the performance of the underlying physical system, namely automatic gain control (AGC) as a fundamental closed-loop control that regulates the grid frequency to a critical nominal value. Our results show that when the fault-induced delay reaches seconds (e.g., more than four seconds in some of our experiments), degradation of the AGC becomes evident. Particularly, the AGC is most vulnerable when it is in a transient following say step changes in loading, because the significant state fluctuations will exacerbate the effects of using a stale system state in the control.
Software defined networking (SDN) is an emerging technology for controlling flows through networks. Used in the context of industrial control systems, an objective is to design configurations that have built-in protection for hardware failures in the sense that the configuration has "baked-in" back-up routes. The objective is to leave the configuration static as long as possible, minimizing the need to have the controller push in new routing and filtering rules We have designed and implemented a tool that enables us to determine the complete connectivity map from an analysis of all switch configurations in the network. We can use this tool to explore the impact of a link failure, in particular to determine whether the failure induces loss of the ability to deliver a flow even after the built-in back-up routes are used. A measure of the original configuration's resilience to link failure is the mean number of link failures required to induce the first such loss of service. The computational cost of each link failure and subsequent analysis is large, so there is much to be gained by reducing the overall cost of obtaining a statistically valid estimate of resiliency. This paper shows that when analysis of a network state can identify all as-yet-unfailed links any one of whose failure would induce loss of a flow, then we can use the technique of importance sampling to estimate the mean number of links required to fail before some flow is lost, and analyze the potential for reducing the variance of the sample statistic. We provide both theoretical and empirical evidence for significant variance reduction.
Real world applications of Wireless Sensor Networks such as border control, healthcare monitoring and target tracking require secure communications. Thus, during WSN setup, one of the first requirements is to distribute the keys to the sensor nodes which can be later used for securing the messages exchanged between sensors. The key management schemes in WSN secure the communication between a pair or a group of nodes. However, the storage capacity of the sensor nodes is limited which makes storage requirement as an important parameter for the evaluation of key management schemes. This paper classifies the existing key management schemes proposed for WSNs into three categories: storage inefficient, storage efficient and highly storage efficient key management schemes.
This paper presents a contextual anomaly detection method and its use in the discovery of malicious voltage control actions in the low voltage distribution grid. The model-based anomaly detection uses an artificial neural network model to identify a distributed energy resource's behaviour under control. An intrusion detection system observes distributed energy resource's behaviour, control actions and the power system impact, and is tested together with an ongoing voltage control attack in a co-simulation set-up. The simulation results obtained with a real photovoltaic rooftop power plant data show that the contextual anomaly detection performs on average 55% better in the control detection and over 56% better in the malicious control detection over the point anomaly detection.
The successful operations of modern power grids are highly dependent on a reliable and ecient underlying communication network. Researchers and utilities have started to explore the opportunities and challenges of applying the emerging software-de ned networking (SDN) technology to enhance eciency and resilience of the Smart Grid. This trend calls for a simulation-based platform that provides sufcient exibility and controllability for evaluating network application designs, and facilitating the transitions from inhouse research ideas to real productions. In this paper, we present DSSnet, a hybrid testing platform that combines a power distribution system simulator with an SDN emulator to support high delity analysis of communication network applications and their impacts on the power systems. Our contributions lay in the design of a virtual time system with the tight controllability on the execution of the emulation system, i.e., pausing and resuming any speci ed container processes in the perception of their own virtual clocks, with little overhead scaling to 500 emulated hosts with an average of 70 ms overhead; and also lay in the ecient synchronization of the two sub-systems based on the virtual time. We evaluate the system performance of DSSnet, and also demonstrate the usability through a case study by evaluating a load shifting algorithm.