Biblio

In modern grid systems which is a typical cyber-physical System (CPS), information space and physical space are closely related. Once the communication link is interrupted, it will make a great damage to the power system. If the service path is too concentrated, the risk will be greatly increased. In order to solve this problem, this paper constructs a route planning algorithm that combines node load pressure, link load balance and service delay risk. At present, the existing intelligent algorithms are easy to fall into the local optimal value, so we chooses the deep reinforcement learning algorithm (DRL). Firstly, we build a risk assessment model. The node risk assessment index is established by using the node load pressure, and then the link risk assessment index is established by using the average service communication delay and link balance degree. The route planning problem is then solved by a route planning algorithm based on DRL. Finally, experiments are carried out in a simulation scenario of a power grid system. The results show that our method can find a lower risk path than the original Dijkstra algorithm and the Constraint-Dijkstra algorithm.

When using deep learning for DDoS attack detection, there is a general degradation in detection performance due to small sample size. This paper proposes a small-sample DDoS attack detection method based on deep transfer learning. First, deep learning techniques are used to train several neural networks that can be used for transfer in DDoS attacks with sufficient samples. Then we design a transferability metric to compare the transfer performance of different networks. With this metric, the network with the best transfer performance can be selected among the four networks. Then for a small sample of DDoS attacks, this paper demonstrates that the deep learning detection technique brings deterioration in performance, with the detection performance dropping from 99.28% to 67%. Finally, we end up with a 20.8% improvement in detection performance by deep transfer of the 8LANN network in the target domain. The experiment shows that the detection method based on deep transfer learning proposed in this paper can well improve the performance deterioration of deep learning techniques for small sample DDoS attack detection.

A THz image edge detection approach based on wavelet and neural network is proposed in this paper. First, the source image is decomposed by wavelet, the edges in the low-frequency sub-image are detected using neural network method and the edges in the high-frequency sub-images are detected using wavelet transform method on the coarsest level of the wavelet decomposition, the two edge images are fused according to some fusion rules to obtain the edge image of this level, it then is projected to the next level. Afterwards the final edge image of L-1 level is got according to some fusion rule. This process is repeated until reaching the 0 level thus to get the final integrated and clear edge image. The experimental results show that our approach based on fusion technique is superior to Canny operator method and wavelet transform method alone.

Aiming at the problem that the traditional intrusion detection method can not effectively deal with the massive and high-dimensional network traffic data of industrial control system (ICS), an ICS intrusion detection strategy based on bidirectional generative adversarial network (BiGAN) is proposed in this paper. In order to improve the applicability of BiGAN model in ICS intrusion detection, the optimal model was obtained through the single variable principle and cross-validation. On this basis, the supervised control and data acquisition (SCADA) standard data set is used for comparative experiments to verify the performance of the optimized model on ICS intrusion detection. The results show that the ICS intrusion detection method based on optimized BiGAN has higher accuracy and shorter detection time than other methods.

For real-time applications of arbitrary style transformation, there is a trade-off between the quality of results and the running time of existing algorithms. Hence, it is required to maintain the equilibrium of the quality of generated artwork with the speed of execution. It's complicated for the present arbitrary style-transformation procedures to preserve the structure of content-image while blending with the design and pattern of style-image. This paper presents the implementation of a network using SANET models for generating impressive artworks. It is flexible in the fusion of new style characteristics while sustaining the semantic-structure of the content-image. The identity-loss function helps to minimize the overall loss and conserves the spatial-arrangement of content. The results demonstrate that this method is practically efficient, and therefore it can be employed for real-time fusion and transformation using arbitrary styles.

Style transfer between Chinese fonts is challenging due to both the complexity of Chinese characters and the significant difference between fonts. Existing algorithms for this task typically learn a mapping between the reference and target fonts for each character. Subsequently, this mapping is used to generate the characters that do not exist in the target font. However, the characters available for training are unlikely to cover all fine-grained parts of the missing characters, leading to the overfitting problem. As a result, the generated characters of the target font may suffer problems of incomplete or even radicals and dirty dots. To address this problem, this paper presents a multi-task adversarial learning approach, termed MTfontGAN, to generate more vivid Chinese characters. MTfontGAN learns to transfer a reference font to multiple target ones simultaneously. An alignment is imposed on the encoders of different tasks to make them focus on the important parts of the characters in general style transfer. Such cross-task interactions at the feature level effectively improve the generalization capability of MTfontGAN. The performance of MTfontGAN is evaluated on three Chinese font datasets. Experimental results show that MTfontGAN outperforms the state-of-the-art algorithms in a single-task setting. More importantly, increasing the number of tasks leads to better performance in all of them.

In order to overcome the problem of edge information loss in the process of neural network processing, a method of neural network style transfer based on edge detection is presented. The edge information of the content image is extracted, and the edge information image is processed in the neural network together with the content image and the style image to constrain the edge information of the content image. Compared with Gatys algorithm and markov random field neural network algorithm, the content image edge structure after image style transfer is successfully retained.

Advances in deep neural networks (DNNs) have shown tremendous promise in the medical domain. However, the deep learning tools that are helping the domain, can also be used against it. Given the prevalence of fraud in the healthcare domain, it is important to consider the adversarial use of DNNs in manipulating sensitive data that is crucial to patient healthcare. In this work, we present the design and implementation of a DNN-based image translation attack on biomedical imagery. More specifically, we propose Jekyll, a neural style transfer framework that takes as input a biomedical image of a patient and translates it to a new image that indicates an attacker-chosen disease condition. The potential for fraudulent claims based on such generated `fake' medical images is significant, and we demonstrate successful attacks on both X-rays and retinal fundus image modalities. We show that these attacks manage to mislead both medical professionals and algorithmic detection schemes. Lastly, we also investigate defensive measures based on machine learning to detect images generated by Jekyll.

Deep Neural Networks (DNNs) are susceptible to model stealing attacks, which allows a data-limited adversary with no knowledge of the training dataset to clone the functionality of a target model, just by using black-box query access. Such attacks are typically carried out by querying the target model using inputs that are synthetically generated or sampled from a surrogate dataset to construct a labeled dataset. The adversary can use this labeled dataset to train a clone model, which achieves a classification accuracy comparable to that of the target model. We propose "Adaptive Misinformation" to defend against such model stealing attacks. We identify that all existing model stealing attacks invariably query the target model with Out-Of-Distribution (OOD) inputs. By selectively sending incorrect predictions for OOD queries, our defense substantially degrades the accuracy of the attacker's clone model (by up to 40%), while minimally impacting the accuracy (\textbackslashtextless; 0.5%) for benign users. Compared to existing defenses, our defense has a significantly better security vs accuracy trade-off and incurs minimal computational overhead.

Artificial neural networks in general and deep learning networks in particular established themselves as popular and powerful machine learning algorithms. While the often tremendous sizes of these networks are beneficial when solving complex tasks, the tremendous number of parameters also causes such networks to be vulnerable to malicious behavior such as adversarial perturbations. These perturbations can change a model's classification decision. Moreover, while single-step adversaries can easily be transferred from network to network, the transfer of more powerful multi-step adversaries has - usually - been rather difficult.In this work, we introduce a method for generating strong adversaries that can easily (and frequently) be transferred between different models. This method is then used to generate a large set of adversaries, based on which the effects of selected defense methods are experimentally assessed. At last, we introduce a novel, simple, yet effective approach to enhance the resilience of neural networks against adversaries and benchmark it against established defense methods. In contrast to the already existing methods, our proposed defense approach is much more efficient as it only requires a single additional forward-pass to achieve comparable performance results.

Increasing deep neural networks are applied in solving graph evolved tasks, such as node classification and link prediction. However, the vulnerability of deep models can be revealed using carefully crafted adversarial examples generated by various adversarial attack methods. To explore this security problem, we define the link prediction adversarial attack problem and put forward a novel iterative gradient attack (IGA) strategy using the gradient information in the trained graph autoencoder (GAE) model. Not surprisingly, GAE can be fooled by an adversarial graph with a few links perturbed on the clean one. The results on comprehensive experiments of different real-world graphs indicate that most deep models and even the state-of-the-art link prediction algorithms cannot escape the adversarial attack, such as GAE. We can benefit the attack as an efficient privacy protection tool from the link prediction of unknown violations. On the other hand, the adversarial attack is a robust evaluation metric for current link prediction algorithms of their defensibility.

In this paper, the two methods for ciphering are presented and compared. The aim is to reveal the suitability of chaotic neural network approach to ciphering compared to AES cipher. The durations in seconds of both methods are presented and the two methods are compared. The results show, that the chaotic neural network is fast, suitable for ciphering of short plaintexts. AES ciphering is suitable for longer plaintexts or images and is also more reliable.

Intrusion detection is one of the most prominent and challenging problem faced by cybersecurity organizations. Intrusion Detection System (IDS) plays a vital role in identifying network security threats. It protects the network for vulnerable source code, viruses, worms and unauthorized intruders for many intranet/internet applications. Despite many open source APIs and tools for intrusion detection, there are still many network security problems exist. These problems are handled through the proper pre-processing, normalization, feature selection and ranking on benchmark dataset attributes prior to the enforcement of self-learning-based classification algorithms. In this paper, we have performed a comprehensive comparative analysis of the benchmark datasets NSL-KDD and CIDDS-001. For getting optimal results, we have used the hybrid feature selection and ranking methods before applying self-learning (Machine / Deep Learning) classification algorithmic approaches such as SVM, Naïve Bayes, k-NN, Neural Networks, DNN and DAE. We have analyzed the performance of IDS through some prominent performance indicator metrics such as Accuracy, Precision, Recall and F1-Score. The experimental results show that k-NN, SVM, NN and DNN classifiers perform approx. 100% accuracy regarding performance evaluation metrics on the NSL-KDD dataset whereas k-NN and Naïve Bayes classifiers perform approx. 99% accuracy on the CIDDS-001 dataset.

This paper investigates the impact of authentication on effective capacity (EC) of an underwater acoustic (UWA) channel. Specifically, the UWA channel is under impersonation attack by a malicious node (Eve) present in the close vicinity of the legitimate node pair (Alice and Bob); Eve tries to inject its malicious data into the system by making Bob believe that she is indeed Alice. To thwart the impersonation attack by Eve, Bob utilizes the distance of the transmit node as the feature/fingerprint to carry out feature-based authentication at the physical layer. Due to authentication at Bob, due to lack of channel knowledge at the transmit node (Alice or Eve), and due to the threshold-based decoding error model, the relevant dynamics of the considered system could be modelled by a Markov chain (MC). Thus, we compute the state-transition probabilities of the MC, and the moment generating function for the service process corresponding to each state. This enables us to derive a closed-form expression of the EC in terms of authentication parameters. Furthermore, we compute the optimal transmission rate (at Alice) through gradient-descent (GD) technique and artificial neural network (ANN) method. Simulation results show that the EC decreases under severe authentication constraints (i.e., more false alarms and more transmissions by Eve). Simulation results also reveal that the (optimal transmission rate) performance of the ANN technique is quite close to that of the GTJ method.

Data privacy is a very important problem to address while sharing data among multiple organizations and has become very crucial in the health sectors since multiple organizations such as hospitals are storing data of patients in the form of Electronic Health Records. Stored data is used with other organizations or research analysts to improve the health care of patients. However, the data records contain sensitive information such as age, sex, and date of birth of the patients. Revealing sensitive data can cause a privacy breach of the individuals. This has triggered research that has led to many different privacy preserving techniques being introduced. Thus, we designed a technique that not only encrypts / hides the sensitive information but also sends the data to different organizations securely. To encrypt sensitive data we use different fuzzy logic membership functions. We then use an autoencoder neural network to send the modified data. The output data of the autoencoder can then be used by different organizations for research analysis.

This paper describes a method for classifying onion sites. According to the results of the research, the most spread model of site in onion space is built. To create such a model, a specially trained neural network is used. The classification of neural network is based on five different categories such as using authentication system, corporate email, readable URL, feedback and type of onion-site. The statistics of the most spread types of websites in Dark Net are given.

It is becoming increasingly easy to automatically replace a face of one person in a video with the face of another person by using a pre-trained generative adversarial network (GAN). Recent public scandals, e.g., the faces of celebrities being swapped onto pornographic videos, call for automated ways to detect these Deepfake videos. To help developing such methods, in this paper, we present the first publicly available set of Deepfake videos generated from videos of VidTIMIT database. We used open source software based on GANs to create the Deepfakes, and we emphasize that training and blending parameters can significantly impact the quality of the resulted videos. To demonstrate this impact, we generated videos with low and high visual quality (320 videos each) using differently tuned parameter sets. We showed that the state of the art face recognition systems based on VGG and Facenet neural networks are vulnerable to Deepfake videos, with 85.62% and 95.00% false acceptance rates (on high quality versions) respectively, which means methods for detecting Deepfake videos are necessary. By considering several baseline approaches, we found the best performing method based on visual quality metrics, which is often used in presentation attack detection domain, to lead to 8.97% equal error rate on high quality Deep-fakes. Our experiments demonstrate that GAN-generated Deepfake videos are challenging for both face recognition systems and existing detection methods, and the further development of face swapping technology will make it even more so.

"Deepfake" it is an incipiently emerging face video forgery technique predicated on AI technology which is used for creating the fake video. It takes images and video as source and it coalesces these to make a new video using the generative adversarial network and the output is very convincing. This technique is utilized for generating the unauthentic spurious video and it is capable of making it possible to generate an unauthentic spurious video of authentic people verbally expressing and doing things that they never did by swapping the face of the person in the video. Deepfake can create disputes in countries by influencing their election process by defaming the character of the politician. This technique is now being used for character defamation of celebrities and high-profile politician just by swapping the face with someone else. If it is utilized in unethical ways, this could lead to a serious problem. Someone can use this technique for taking revenge from the person by swapping face in video and then posting it to a social media platform. In this paper, working of Deepfake technique along with how it can swap faces with maximum precision in the video has been presented. Further explained are the different ways through which we can identify if the video is generated by Deepfake and its advantages and drawback have been listed.

Recent advantages in changing faces using DeepFake algorithms, which replace a face of one person with a face of another, truly represent what artificial intelligence and deep learning are capable of. Deepfakes in still images or video clips represent forgeries and tampered visual information. They are becoming increasingly successful and even difficult to notice in some cases. In this paper we analyze deepfakes using SIFT (Scale-Invariant Feature Transform) features. The experimental results show that in deepfake analysis using SIFT keypoints can be considered valuable.

A breakthrough in the emerging use of machine learning and deep learning is the concept of autoencoders and GAN (Generative Adversarial Networks), architectures that can generate believable synthetic content called deepfakes. The threat lies when these low-tech doctored images, videos, and audios blur the line between fake and genuine content and are used as weapons to cause damage to an unprecedented degree. This paper presents a survey of the underlying technology of deepfakes and methods proposed for their detection. Based on a detailed study of all the proposed models of detection, this paper presents SSTNet as the best model to date, that uses spatial, temporal, and steganalysis for detection. The threat posed by document and signature forgery, which is yet to be explored by researchers, has also been highlighted in this paper. This paper concludes with the discussion of research directions in this field and the development of more robust techniques to deal with the increasing threats surrounding deepfake technology.

DeepFake using Generative Adversarial Networks (GANs) tampered videos reveals a new challenge in today's life. With the inception of GANs, generating high-quality fake videos becomes much easier and in a very realistic manner. Therefore, the development of efficient tools that can automatically detect these fake videos is of paramount importance. The proposed DeepFake detection method takes the advantage of the fact that current DeepFake generation algorithms cannot generate face images with varied resolutions, it is only able to generate new faces with a limited size and resolution, a further distortion and blur is needed to match and fit the fake face with the background and surrounding context in the source video. This transformation causes exclusive blur inconsistency between the generated face and its background in the outcome DeepFake videos, in turn, these artifacts can be effectively spotted by examining the edge pixels in the wavelet domain of the faces in each frame compared to the rest of the frame. A blur inconsistency detection scheme relied on the type of edge and the analysis of its sharpness using Haar wavelet transform as shown in this paper, by using this feature, it can determine if the face region in a video has been blurred or not and to what extent it has been blurred. Thus will lead to the detection of DeepFake videos. The effectiveness of the proposed scheme is demonstrated in the experimental results where the “UADFV” dataset has been used for the evaluation, a very successful detection rate with more than 90.5% was gained.

Photo- and video-realistic generation techniques have become a reality following the advent of deep neural networks. Consequently, there are immense concerns regarding the difficulty in differentiating what content is real from what is synthetic. An example of video-realistic generation techniques is the infamous Deepfakes, which exploit the main modality by which humans identify each other. Deepfakes are a category of synthetic face generation methods and are commonly based on generative adversarial networks. In this article, we propose a novel two-step synthetic face image detection method in which general-purpose features are extracted in a first step, trivializing the task of detecting synthetic images. The anomaly detector predicts the conditional probabilities for observing every individual pixel in the image and is trained on pristine data only. The extracted anomaly features demonstrate true generalization capacity across widely different unknown synthesis methods while showing a minimal loss in performance with regard to the detection of known synthetic samples.

A novel deep neural network is proposed, for accurate and robust crowd counting. Crowd counting is a complex task, as it strongly depends on the deployed camera characteristics and, above all, the scene perspective. Crowd counting is essential in security applications where Internet of Things (IoT) cameras are deployed to help with crowd management tasks. The complexity of a scene varies greatly, and a medium to large scale security system based on IoT cameras must cater for changes in perspective and how people appear from different vantage points. To address this, our deep architecture extracts multi-scale features with a pyramid contextual module to provide long-range contextual information and enlarge the receptive field. Experiments were run on three major crowd counting datasets, to test our proposed method. Results demonstrate our method supersedes the performance of state-of-the-art methods.

Object recognition with the help of outdoor video surveillance cameras is an important task in the context of ensuring the security at enterprises, public places and even private premises. There have long existed systems that allow detecting moving objects in the image sequence from a video surveillance system. Such a system is partially considered in this research. It detects moving objects using a background model, which has certain problems. Due to this some objects are missed or detected falsely. We propose to combine the moving objects detection results with the classification, using a deep neural network. This will allow determining whether a detected object belongs to a certain class, sorting out false detections, discarding the unnecessary ones (sometimes individual classes are unwanted), to divide detected people into the employees in the uniform and all others, etc. The authors perform a network training in the Keras developer-friendly environment that provides for quick building, changing and training of network architectures. The performance of the Keras integration into a video analysis system, using direct Python script execution techniques, is between 6 and 52 ms, while the precision is between 59.1% and 97.2% for different architectures. The integration, made by freezing a selected network architecture with weights, is selected after testing. After that, frozen architecture can be imported into video analysis using the TensorFlow interface for C++. The performance of such type of integration is between 3 and 49 ms. The precision is between 63.4% and 97.8% for different architectures.

The incidence of abnormal road traffic events, especially abnormal traffic congestion, is becoming more and more prominent in daily traffic management in China. It has become the main research work of urban traffic management to detect and identify traffic congestion incidents in time. Efficient and accurate detection of traffic congestion incidents can provide a good strategy for traffic management. At present, the detection and recognition of traffic congestion events mainly rely on the integration of road traffic flow data and the passing data collected by electronic police or devices of checkpoint, and then estimating and forecasting road conditions through the method of big data analysis; Such methods often have some disadvantages such as low time-effect, low precision and small prediction range. Therefore, with the help of the current large and medium cities in the public security, traffic police have built video surveillance equipment, through computer vision technology to analyze the traffic flow from video monitoring, in this paper, the motion state and the changing trend of vehicle flow are obtained by using the technology of vehicle detection from video and multi-target tracking based on deep learning, so as to realize the perception and recognition of traffic congestion. The method achieves the recognition accuracy of less than 60 seconds in real-time, more than 80% in detection rate of congestion event and more than 82.5% in accuracy of detection. At the same time, it breaks through the restriction of traditional big data prediction, such as traffic flow data, truck pass data and GPS floating car data, and enlarges the scene and scope of detection.