Biblio

From the perspective of time domain, the propagation characteristics of sound waves in seawater can be seen more intuitively. In order to study the influence and characteristics of seamount on low frequency acoustic propagation, the research of this paper used the Finite Element Method (FEM) based on time domain to set up a full-waveguide low-frequency acoustic propagation simulation model, and discussed the influencing laws about acoustic propagation on seamount. The simulation results show that Seamounts can hinder the propagation of sound waves, weaken the energy of sound waves. The topographic changes of seamounts can cause the coupling and transformation of acoustic signals during the propagation which can stimulate the seabed interface wave.

Recently, in solving problems of sound radiation by systems of piezoceramic radiators, new approaches have emerged, which make it possible to significantly approximate the design parameters of systems to the actually measured ones. These approaches are associated with taking into account the specific features of these systems performing two functions - the function of converting electrical energy into acoustic energy and the function of forming the latter in the surrounding space. The peculiarity of the first function is the interconnection of the electric, mechanical and acoustic fields during energy conversion. The peculiarity of the second function is the interaction of the radiators in the system during the formation of its acoustic field. The aim of the work is to study the effect of acoustic interaction of cylindrical piezoceramic radiators in the composition of flat systems on their physical fields. Using the method of coupled fields in multiply connected domains, using the addition theorems for cylindrical wave functions, we obtain analytical relations that allow one to calculate the numerical results for the parameters of three interconnected physical fields that ensure the emission of sound by plane systems. Their analysis showed that with the radial symmetry of electrical excitation of cylindrical radiators, the conversion of electrical energy into mechanical energy is carried out on one - zero mode of oscillation. The placement of the radiators in the composition of the flat systems leads to the appearance of the effect of acoustic interaction between them in an external field, due to the multiple exchange of radiated and scattered waves. This effect destroys the radial symmetry of the acoustic loading of a single radiator. The violation of symmetry in the conversion of mechanical energy into acoustic energy leads to the appearance of oscillations that follow the zero mode. As a result, there is an effective redistribution of energy “pumped” into the radiators in the zero mode, between subsequent oscillations of the radiators. In turn, the emergence of new modes changes the acoustic field of a flat system. The results show the need to take into account the above features of the physical fields of the radiators in the composition of flat systems when choosing methods and developing methods for measuring field characteristics.

Solidly mounted resonators (SMRs) built on dielectric acoustic reflectors can save several fabrication steps as well as avoid undesired parasitic effects when exciting extended electrodes via capacitive coupling. In this work we manufacture and measure the frequency response of AlN-based SMRs built on 7-layer ZnO/SiO2 acoustic reflectors with SiO2 working as low impedance material and ZnO as high impedance material. After applying a 700°C treatment, their frequency response is measured again and compared with the pre-treatment measurements.

Expanding techniques for chip-scale acoustic wave focusing would open doors for advancements in signal processing and quantum electromechanical microsystems. In this paper, we present a method for acoustic wave focusing and wavefront shaping at radio frequencies (RF), validated with thin-film lithium niobite on a low-loss and high coupling silicon carbide (LiNbO3-on-SiC) testbed. By depositing a metal layer, we can mitigate the piezoelectric stiffening effect, and reduce the acoustic wave speed in a patterned area. Employing a design analogous to geometric optical systems, efficient acoustic wave focusing is experimentally observed. With more development, this technique could be employed in emerging acoustic microsystems.

The achievable bandwidth in ladder acoustic filters is strictly limited by the electromechanical coupling coefficient (k;) in conventional ladder-acoustic filters. Furthermore, their out-of-band rejection is inherently weak due to the frequency responses of the shunt or series-connected acoustic resonators. This work proposes a coupling-matrix-based solution for both issues by employing acoustic and electromagnetic resonators within the same filter prototype using prescribed Chebyshev responses. It has been shown that significantly much wider bandwidths, that cannot be achieved with acoustic-only filters, can be obtained. An important strength of the proposed method is that a filter with a particular FBW can be designed with a wide range of acoustic resonators with different k; values. An 14 % third-order asymmetrical-response filter is designed and fabricated using electromagnetic resonators and an acoustic resonator with a k; of 3.5 %.

The main limitation of acoustic particle separation for microfluidic application is its low sorting efficiency. This is due to the weak coupling of surface acoustic waves (SAWs) into the microchannel. In this work, we demonstrate bulk acoustic wave (BAW) particle sorting using capacitive micromachined ultrasonic transducers (CMUTs) for the first time. A collapsed mode CMUT was driven in air to generate acoustic pressure within the silicon substrate in the in-plane direction of the silicon die. This acoustic pressure was coupled into a water droplet, positioned at the side of the CMUT die, and measured with an optical hydrophone. By using a beam steering approach, the ultrasound generated from 32 CMUT elements were added in-phase to generate a maximum peak-to-peak pressure of 0.9 MPa. Using this pressure, 10 µm latex beads were sorted almost instantaneously.

SummaryIn this study, the propagation and resonance properties of shear-horizontal surface acoustic waves (SH SAWs) on a rotated Y-cut 90°X propagating Ca3TaGa3Si2O14 (CTGS) with a Au- or Al-interdigital transducer (IDT) were investigated theoretically and experimentally. It was found that not only a high-density Au-IDT but also a conventional Al-IDT enables the energy trapping of SH SAW in the vicinity of the surface. For both IDTs, the effective electromechanical coupling factor of about 1.2% and the zero temperature coefficient of frequency can be simultaneously obtained by adjusting the cut angle of CTGS and the electrode film thickness.

The Inertial Navigation System(INS) and Doppler Velocity Logs(DVL) which are used frequently on autonomous underwater vehicles can be fused under different types of integration architectures. These architectures differ in terms of algorithm requirements and complexity. DVL may experience acoustic beam losses during operation due to environmental factors and abilities of the sensor. In these situations, radial velocity information cannot be received from lost acoustic beam. In this paper, the performances of INS and DVL integration under tightly and loosely coupled architectures are comparatively presented with simulations. In the tightly coupled approach, navigation filter is updated with solely available beam measurements by using sequential measurement update method, and the sensitivity of this method is investigated for acoustic beam losses.

Acoustic wave (AW) synthesis methodologies have become popular among AW filter designers because they provide a fast and precise seed to start with the design of AW devices. Nowadays, with the increasing complexity of carrier aggregation, there is a strong necessity to develop synthesis methods more focused on multiport filtering schemes. However, when dealing with multiport filtering functions, numerical accuracy plays an important role to succeed with the synthesis process since polynomial degrees are much higher as compared to the standalone filter case. In addition to polynomial degree, the number set of polynomial coefficients is also an important source of error during the extraction of the circuital elements of the filter. Nonetheless, in this paper is demonstrated that coupling matrix approaches are the best choice when the objective is to synthesize filtering functions with complex roots in their characteristic polynomials, which is the case of the channel polynomials of the multiport device.

A High Overtone Bulk Acoustic Wave Resonator (HBAR) is fabricated with the active material being Ba0.5Sr0.5TiO3 (BST). Owing to its strong electrostrictive property, the BST needs an external dc voltage to yield an electromechanical coupling. The variations in resonances with respect to varying dc fields are noted and analyzed with the aid of an Resonant Spectrum Method (RSM) model. Effective coupling coefficient \$(\textbackslashmathrmK\_\textbackslashmathrme\textbackslashmathrmf\textbackslashmathrmfˆ2(%))\$ in the case of employed MIM based structure is observed and the comparisons are drawn with the corresponding values of the CPC structures. An improvement of 70% in the value of \$\textbackslashmathrmK\_\textbackslashmathrme\textbackslashmathrmf\textbackslashmathrmfˆ2\$(%)at 1.34 GHz is witnessed in MIM structures because of direct access to the bottom electrode of the structure.

Waveguided air-coupled ultrasonic phased arrays offer grating-lobe-free beam forming for many applications such as obstacle detection, non-destructive testing, flow metering or tactile feedback. However, for industrial applications, the open output ports of the waveguide can be clogged due to dust, liquids or dirt leading to additional acoustic attenuation. In previous work, we presented the effectiveness of hydrophobic fabrics as a protection layer for acoustic waveguides. In this work, we created a numerical model of the waveguide including the hydrophobic fabric allowing the prediction of the insertion loss (IL). The numerical model uses the boundary element method (BEM) and the finite element method (FEM) in the frequency domain including the waveguide, the hydrophobic fabric and the finite-sized rigid baffle used in the measurements. All walls are assumed as ideal sound hard and the transducers are ideal piston transducers. The specific flow resistivity of the hydrophobic fabric, which is required for the simulation, is analyzed using a 3D-printed flow pipe. The simulations are validated with a calibrated microphone in an anechoic chamber. The IL of the simulations are within the uncertainties of the measurements. In addition, both the measurements and the simulations have no significant influence on the beamforming capabilities.

This paper presents a distributed adaptive algorithm for node-specific sound zoning in a wireless acoustic sensor and actuator network (WASAN), based on a network-wide acoustic contrast control (ACC) method. The goal of the ACC method is to simultaneously create node-specific zones with high signal power (bright zones) while minimizing power leakage in other node-specific zones (dark zones). To obtain this, a network-wide objective involving the acoustic coupling between all the loudspeakers and microphones in the WASAN is proposed where the optimal solution is based on a centralized generalized eigenvalue decomposition (GEVD). To allow for distributed processing, a gradient based GEVD algorithm is first proposed that minimizes the same objective. This algorithm can then be modified to allow for a fully distributed implementation, involving in-network summations and simple local processing. The algorithm is referred to as the distributed adaptive gradient based ACC algorithm (DAGACC). The proposed algorithm outperforms the non-cooperative distributed solution after only a few iterations and converges to the centralized solution, as illustrated by computer simulations.

In this paper, an acoustic resonator with frequency \textbackslashtextgreater 5 GHz is designed, implemented, and measured with electromechanical coupling exceeding 15% and low temperature dependence compared to conventional Lamb-wave resonators. The acoustic resonator is optimized for the S4 mode Lamb waves in a bi-morph composed of Lithium Niobate and Silicon Dioxide. The resonator optimization is based on adjusting the thickness of different materials in the bimorph to maximize the coupling and minimize temperature dependence simultaneously. The achieved specifications are adequate for 5G sub-6 GHz frequency band n46 in addition to Wi-Fi new bands between 5 and 6 GHz.

The measurement of room acoustics plays a wide role in audio research, from physical acoustics modelling and virtual reality applications to speech enhancement. While vast literature exists on position-dependent room acoustics and coupling of rooms, little has explored the transition from one room to its neighbour. This paper presents the measurement and analysis of a dataset of spatial room impulse responses for the transition between four coupled room pairs. Each transition consists of 101 impulse responses recorded using a fourth-order spherical microphone array in 5 cm intervals, both with and without a continuous line-of-sight between the source and microphone. A numerical analysis of the room transitions is then presented, including direct-to-reverberant ratio and direction of arrival estimations, along with potential applications and uses of the dataset.

This paper presents the synthesis and circuit transformations of acoustic wave filters based on a transversal arrangement of the individual resonators. This configuration allows for the synthesis of any filter response without detrimental of the limited value of the electro-acoustic coupling coefficient. The synthesis can be performed in the low-pass domain to be latter transformed into the band-pass domain. This latter step results in significant differences between the low-pass and the band-pass responses in wideband stringent filters. This work, after an initial synthesis in the low-pass domain, directly applies the pass-band circuit transformation achieving a more accurate synthesized network even for wideband filters.

We present results from a vibrating mesh nebulizer for which the mesh is a micro-machined silicon membrane perforated with up to a thousand micron-sized, pyramidal holes. Finite element modelling is used to better understand the measured results of the nebulizer when tested in the dry state as well as when loaded with a liquid. In particular, we found that the frequency response of the system is well represented by the superposition of the frequency response of its two main subcomponents: the piezo driving unit and the silicon membrane. As such, the system is found to have resonance peaks for which the complete assembly flexes in addition to peaks that correspond to the flexural resonance modes of the silicon membrane on its own. Similarly, finite element modelling was used to understand differences observed between the frequency response measured on the nebulizer in the dry condition compared to its wet or liquid loaded operation. It was found that coupling between the structural and the acoustic domains shifts the resonance peaks significantly to the left of the frequency plot. In fact, it was found that at the operating frequency of the nebulizer, the system resonates in a (0,3) when the membrane is loaded with a liquid compared with a (0,2) resonance mode when it is operating in the dry state.

Surface acoustic wave devices based on LiNbO3/interlayer/substrate layered structure have attracted great attention due to the high electromechanical coupling coefficient (K2) of LiNbO3 and the energy confinement effect of the layered structure. In this study, 30° YX-LiNbO3 (LN)/SiO2/Si multilayered structure, which can excited shear-horizontal surface acoustic wave (SH-SAW) with high K2, was proposed. The optimized orientation of LiNbO3 was verified by the effective permittivity method based on the stiffness matrix. The phase velocity, K2 value, and temperature coefficient of frequency (TCF) of the SH-SAW were calculated as a function of the LiNbO3 thickness at different thicknesses of the SiO2 in 30° YX-LiNbO3/SiO2/Si multilayer structure by finite element method (FEM). The results show that the optimized LiNbO3 thickness is 0.1 and the optimized SiO2 thickness is 0.2λ. The optimized Al electrode thickness and metallization ratio are 0.07 and 0.4, respectively. The K2 of the SH-SAW is 29.89%, the corresponding phase velocity is 3624.00 m/s and TCF is about 10 ppm/°C with the optimized IDT/30° YX-LiNbO3/SiO2/Si layered structure.

This paper reports high frequency surface acoustic wave (SAW) devices developed on Sc doped (30%) AlN on high resistivity Si for demonstrating surface acoustic wave – spin wave coupling. Enhanced Q-factors were found for both propagation modes – Rayleigh (4.7 GHz) and Sezawa (8 GHz). SAW/SW (spin wave) coupling is proven for two-ports SAW structures having a magnetostrictive layer of Ni between the two interdigitated transducers (IDTs). A decrease of 3.42 dB was observed in the amplitude of the transmission parameter, at resonance, when the magnetic field was applied. The angle between the applied magnetic field and the SAW propagation direction is π/4.

Novel acoustic wave networks comprising resonators achieving prescribed coupling are proposed. The design methodology is based on classic network synthesis of doubly- and/or singly-terminated networks. The synthesis of LTE Band 25 contiguous duplexer prototype is performed and its electrical characteristics are presented.

Acoustic tomography experiments for ocean observation require low-frequency, broadband, high power, small size underwater acoustic transducer, but there are contradictions between the performance of the transducer, therefore a longitudinal-bending fluid-cavity coupled broadband underwater acoustic transducer is presented. The difference between the transducer and the traditional JH transducer is that the opening position of the Helmholtz resonant cavity is arranged between the radiation cover plate and the cylindrical cavity. Based on the optimization results of the finite element software ANSYS produced a transducer test prototype. The test results show that the simulation results and experimental results are basically consistent, and the transmitting voltage response can reach 136dB, the transmitting voltage response fluctuation shall no more than 6dB through the range of 700-1200Hz in the horizontal direction, verified the longitudinal-bending mode and the fluid-cavity mode of the transducer are well coupled, and the transducer is an ideal low-frequency, broadband, high power, small size underwater acoustic transducer.

This work reviews various methods which improve the effective coupling coefficient ( k2eff) of non-bulk acoustic wave (BAW) aluminum nitride (AlN) based RF MEMS resonators, mainly focusing on the innovative structural design of the resonators. k2eff is the key parameter for a resonator in communication applications because it measures the achievable fractional bandwidth of the filter constructed. The resonator's configuration, dimension, material stack and the fabrication process will all have impact on its k2eff. In this paper, the authors will review the efforts in improving the k2eff of piezoelectric MEMS resonators from research community in the past 15 years, mainly from the following three approaches: coupling lateral wave with vertical wave, exciting two-dimensional (2-D) lateral wave, as well as coupling 2-D lateral wave with vertical wave. The material will be limited to AlN family, which is proven to be manageable for manufacturing. The authors will also try to make recommendations to the effectiveness of various approaches and the path forward.

Dynamic strain sensing is necessary for high-temperature harsh-environment applications, including powerplants, oil wells, aerospace, and metal manufacturing. Monitoring dynamic strain is important for structural health monitoring and condition-based maintenance in order to guarantee safety, increase process efficiency, and reduce operation and maintenance costs. Sensing in high-temperature (HT), harsh-environments (HE) comes with challenges including mounting and packaging, sensor stability, and data acquisition and processing. Wireless sensor operation at HT is desirable because it reduces the complexity of the sensor connection, increases reliability, and reduces costs. Surface acoustic wave resonators (SAWRs) are compact, can operate wirelessly and battery-free, and have been shown to operate above 1000°C, making them a potential option for HT HE dynamic strain sensing. This paper presents wirelessly interrogated SAWR dynamic strain sensors operating around 288.8MHz at room temperature and tested up to 400°C. The SAWRs were calibrated with a high-temperature wired commercial strain gauge. The sensors were mounted onto a tapered-type Inconel constant stress beam and the assembly was tested inside a box furnace. The SAWR sensitivity to dynamic strain excitation at 25°C, 100°C, and 400°C was .439 μV/με, 0.363μV/με, and .136 μV/με, respectively. The experimental outcomes verified that inductive coupled wirelessly interrogated SAWRs can be successfully used for dynamic strain sensing up to 400°C.

This paper is the first to investigate the long-term stability of Surface Acoustic Wave Gyroscopes (SAWG) using an ovenized control system. Monolithic integration of a MEMS heater adjacent to SAW devices on Lithium Niobate over insulator substrate (LNOI) tightly couples frequency-based temperature detection with heating for temperature and frequency stabilization. This first prototype demonstrates the ability to minimize the temperature variations of the SAWG to below ±10 μK and stabilize the SAWG resonance frequency to ±0.2 ppm. This approach thus eliminates the thermal drift in a SAWG and enables the development of a new generation of MEMS-based gyroscopes with long-term stability.

By exploiting the simultaneous particle-conserving and particle-nonconserving phonon-photon interactions in an optomechanical array, we find a topologically protected edge state for phonons that can be parametrically amplified when all the bulk states remain stable.

Underwater acoustic (UWA) channel is complex because of its multipath environment, Doppler shift and rapidly changing characteristics. Many of the UWA communication- based applications demand high data rates and reliable communication. The orthogonal frequency division multiplexing (OFDM) system is very effective in UWA channels and provides high data rate with low equalization complexity. It is a challenging task to achieve reliability over these channels. The low-density parity-check (LDPC) codes give a better error performance than turbo codes, for UWA channels. The spatially-coupled low-density parity-check (SC-LDPC) codes have been shown to have the capacity-achieving performance over terrestrial communication. In this paper, we have studied by simulation, the performance of protograph based SC-LDPC codes over shallow water acoustic environment with a communication range of 1000 m and channel bandwidth of 10 KHz. Our results show that SC-LDPC codes give 1 dB performance improvement over LDPC codes at a Bit Error Rate (BER) of 10-3 for the same latency constraints.