Biblio

Acoustic communication is a key enabler for underwater Internet of Things networks between autonomous underwater platforms. Underwater Internet of Things networks face a harsh communications environment and limited energy resources which makes them susceptible to interference, whether intentional (i.e., jamming) or unintentional. Resilient, power efficient waveforms and modulation schemes are needed for underwater acoustic communications in order to avoid outages and excessive power drain. We explore the impact of modulation scheme on the resiliency of underwater acoustic communications in the presence of channel impairments, interference, and jamming. In particular, we consider BFSK and OFDM schemes for underwater acoustic communications and assess the utility of Polar coding for strengthening resiliency.

MIMO system makes full use of the space dimension, in the era of increasingly tense spectrum resources, which greatly improves the spectrum efficiency and is one of the future communication support technologies. At the same time, considering the high cost of direct communication between the two parties in a long distance, the relay communication mode has been paid more and more attention. In relay communication network, each node connected by relay has different security levels. In order to forward the information of all nodes, the relay node has the lowest security permission level. Therefore, it is meaningful to study the physical layer security problem in MIMO two-way relay system with relay as the eavesdropper. In view of the above situation, this paper proposes the physical layer security model of MIMO two-way relay cooperative communication network, designs a communication matching grouping algorithm with low complexity and a two-step carrier allocation optimization algorithm, which improves the total security capacity of the system. At the same time, theoretical analysis and simulation verify the effectiveness of the proposed algorithm.

A new type of time modulated metamaterial (MTM) antenna array transmitter capable of realizing 2D directional modulation (DM) for physical layer (PHY) security is presented in this work. The proposed 2D DM MTM antenna array is formed by a time modulated corporate feed network loaded with composite right/left-handed (CRLH) leaky wave antennas (LWAs). By properly designing the on-off states of the switch for each antenna feeding branch as well as harnessing the frequency scanning characteristics of CRLH L WAs, 2D DM can be realized to form a PHY secured transmission link in the 2D space. Experimental results demonstrate the bit-error-rate (BER) is low only at a specific 2D angle for the orthogonal frequency-division multiplexing (OFDM) wireless data links.

In Forward Error Correction (FEC), redundant bits are added for detecting and correcting bit error which increases the bandwidth. To solve this issue we combined FEC method with higher order M-ary modulation to provide a bandwidth efficient system. An input bit stream is mapped to a bi-orthogonal code on different levels based on the code rates (4/16, 3/16, and 2/16) used. The jamming attack on wireless networks are mitigated by Chaotic Frequency Hopping (CFH) spread spectrum technique. In this paper, to achieve better data rate and to transmit the data in a secured manner we combined FEC and CFH technique, represented as Code and Chaotic Frequency Modulation (CCFM). In addition, two rate adaptation algorithms namely Static retransmission rate ARF (SARF) and Fast rate reduction ARF (FARF) are employed in CFH technique to dynamically adapt the code rate based on channel condition to reduce a packet retransmission. Symbol Error Rate (SER) performance of the system is analyzed for different code rate with the conventional OFDM in the presence AWGN and Rayleigh channel and the reliability of CFH method is tested under different jammer.

This paper studies the hierarchical secure multicast algorithm in sparse code multiple access (SCMA) networks, its network security capacity is no longer limited by the users with the worst channel quality in multicast group. Firstly, we propose a network security energy efficiency (SEE) maximization problem. Secondly, in order to reduce the computational complexity, we propose a suboptimal algorithm (SA), which separates the codebook assignment with artificial noise from the power allocation with artificial noise. To further decrease the complexity of Lagrange method, a power allocation algorithm with increased fixed power is introduced. Finally, simulation results show that the network performance of the proposed algorithm in SCMA network is significantly better than that in orthogonal frequency division multiple access (OFDMA) network.

This article reports results about the development of the algorithm that allows to increase the information security of OFDM communication system based on the discrete-nonlinear Colpitts system with dynamic chaos. Proposed system works on two layers: information and transport. In the first one, Arnold Transform was applied. The second one, transport level security was provided by QAM constellation mixing. Correlation coefficients, Shannon's entropy and peak-to-average power ratio (PAPR) were estimated.

In this work, the algorithm of increasing the information security of a communication system with Orthogonal Frequency Division Multiplexing (OFDM) was achieved by using a discrete-nonlinear Duffing system with dynamic chaos. The main idea of increasing information security is based on scrambling input information on three levels. The first one is mixing up data order, the second is scrambling data values and the final is mixing symbols at the Quadrature Amplitude Modulation (QAM) plot constellation. Each level's activities were made with the use of pseudorandom numbers set, generated by the discrete-nonlinear Duffing system with dynamic chaos.

Reconfigurable Intelligent Surface (RIS) is a new paradigm that enables the reconfiguration of the wireless environment. Based on this feature, RIS can be employed to facilitate Physical-layer Key Generation (PKG). However, this technique could also be exploited by the attacker to destroy the key generation process via manipulating the channel features at the legitimate user side. Specifically, this paper proposes a new RIS-assisted Manipulating attack (RISM) that reduces the wireless channel reciprocity by rapidly changing the RIS reflection coefficient in the uplink and downlink channel probing step in orthogonal frequency division multiplexing (OFDM) systems. The vulnerability of traditional key generation technology based on channel frequency response (CFR) under this attack is analyzed. Then, we propose a slewing rate detection method based on path separation. The attacked path is removed from the time domain and a flexible quantization method is employed to maximize the Key Generation Rate (KGR). The simulation results show that under RISM attack, when the ratio of the attack path variance to the total path variance is 0.17, the Bit Disagreement Rate (BDR) of the CFR-based method is greater than 0.25, and the KGR is close to zero. In addition, the proposed detection method can successfully detect the attacked path for SNR above 0 dB in the case of 16 rounds of probing and the KGR is 35 bits/channel use at 23.04MHz bandwidth.

Visible light communication (VLC) is considered as an emerging system for wireless indoor multimedia communications. As any wireless communication system, its channels are open and reachable to both licensed and unlicensed users owing to the broadcast character of visible-light propagation in public areas or multiple-user scenarios. In this work, we consider the physical-layer security approaches for VLC to mitigate this limitation. The physical-layer security approaches can be divided into two categories: keyless security and key-based security approaches. In the last category, recently, the authors introduced physical-layer key-generation approaches for optical orthogonal frequency division multiplexing (OFDM) systems. In these approaches, the cyclic prefix (CP) samples are exploited for key generation. In this paper, we study the effect of the length of key space and order of modulation on the security level, BER performance, and key-disagreement-rate (KDR) of the introduced key-based security approaches. From the results, our approaches are more efficient in higher order of modulation as the KDR decreases with the increase of order of modulation.

This paper studies Physical-layer Network Coding (PNC) in a two-way relay channel (TWRC) operated based on OFDM and QPSK modulation but with the presence of carrier frequency offset (CFO). CFO, induced by node motion and/or oscillator mismatch, causes inter-carrier interference (ICI) that impairs received signals in PNC. Our ultimate goal is to empower the relay in TWRC to decode network-coded information of the end users at a low bit error rate (BER) under CFO, as it is impossible to eliminate the CFO of both end users. For that, we first put forth two signal detection and channel decoding schemes at the relay in PNC. For signal detection, both schemes exploit the signal structure introduced by ICI, but they aim for different output, thus differing in the subsequent channel decoding. We then consider CFO compensation that adjusts the CFO values of the end nodes simultaneously and find that an optimal choice is to yield opposite CFO values in PNC. Particularly, we reveal that pilot insertion could play an important role against the CFO effect, indicating that we may trade more pilots for not just a better channel estimation but also a lower BER at the relay in PNC. With our proposed measures, we conduct simulation using repeat-accumulate (RA) codes and QPSK modulation to show that PNC can achieve a BER at the relay comparable to that of point-to-point transmissions for low to medium CFO levels.

Underwater acoustic (UWA) channel is complex because of its multipath environment, Doppler shift and rapidly changing characteristics. Many of the UWA communication- based applications demand high data rates and reliable communication. The orthogonal frequency division multiplexing (OFDM) system is very effective in UWA channels and provides high data rate with low equalization complexity. It is a challenging task to achieve reliability over these channels. The low-density parity-check (LDPC) codes give a better error performance than turbo codes, for UWA channels. The spatially-coupled low-density parity-check (SC-LDPC) codes have been shown to have the capacity-achieving performance over terrestrial communication. In this paper, we have studied by simulation, the performance of protograph based SC-LDPC codes over shallow water acoustic environment with a communication range of 1000 m and channel bandwidth of 10 KHz. Our results show that SC-LDPC codes give 1 dB performance improvement over LDPC codes at a Bit Error Rate (BER) of 10-3 for the same latency constraints.

In-Band Full-Duplex (IBFD) Underwater Acoustic (UWA) communication technology plays a major role in enhancing the performance of Underwater acoustic sensor networks (UWSN). Self-Interference (SI) is one of the main inherent challenges affecting the performance of IBFD UWA communication. To reconstruct the SI signal and counteract the SI effect, this is important to estimate the short range channel through which the SI signal passes. Inaccurate estimation will result in the performance degradation of IBFD UWA communication. From the perspective of engineering implementation, we consider that the UWA communication modem shell has a significant influence on the short-range SI channel, which will limit the efficiency of self-interference cancellation in the analog domain to some degree. Therefore we utilize a simplified model to simulate the influence of the structure of the IBFD UWA communication modem on the receiving end. This paper studies the effect of acoustic-shell coupling on near-end self-interference signal of IBFD UWA communication modem. Some suggestions on the design of shell structure of IBFD UWA communication modem are given.

Attacks by Jamming on wireless communication network can provoke Denial of Services. According to the communication system which is affected, the consequences can be more or less critical. In this paper, we propose to develop an algorithm which could be implemented at the reception stage of a communication terminal in order to detect the presence of jamming signals. The work is performed on Wi-Fi communication signals and demonstrates the necessity to have a specific signal processing at the reception stage to be able to detect the presence of jamming signals.

Wireless technology has seen a tremendous growth in the recent past. Orthogonal Frequency Division Multiplexing (OFDM) modulation scheme has been utilized in almost all the advanced wireless techniques because of the advantages it offers. Hence in this aspect, SystemVue based OFDM transceiver has been developed with AWGN as the channel noise. To mitigate the channel noise Convolutional code with Viterbi decoder has been depicted. Further to protect the information from the malicious users the data is scrambled with the aid of gold codes. The performance of the transceiver is analysed through various Bit Error Rate (BER) versus Signal to Noise Ratio (SNR) graphs.

This paper investigates the physical layer (PHY-layer) authentication that exploits channel state information (CSI) to enhance multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) system security by detecting spoofing attacks in wireless networks. A multi-user authentication system is proposed using convolutional neural networks (CNNs) which also can distinguish spoofers effectively. In addition, the mini batch scheme is used to train the neural networks and accelerate the training speed. Meanwhile, L1 regularization is adopted to prevent over-fitting and improve the authentication accuracy. The convolutional-neural-network-based (CNN-based) approach can authenticate legitimate users and detect attackers by CSIs with higher performances comparing to traditional hypothesis test based methods.

Multiple-input multiple-output (MIMO) techniques are currently the de facto approach for increasing the capacity and reliability of communication systems. Spatial modulation (SM) is presently one of the most eminent MIMO techniques. As, it combines the advantages of having higher spectral efficiency than repetition coding (RC) while overcoming the inter-channel interference (ICI) faced by spatial multiplexing (SMP). Moreover, SM reduces system complexity. In this paper, for the first time in literature, the use of MIMO techniques is explored in Internet-of-Things(IoT) deployments by introducing a novel technique called security aware spatial modulation (SA-SM).SA-SM provides a low complexity, secure and spectrally efficient technique that harvests the advantages of SM, while facing the arising security concerns of IoT systems. Using an undemanding modification at the receiver, SA-SM gives an extra degree of technology independent physical layer security. Our results show that SA-SM forces the bit-error-rate (BER) of an eavesdropper to not exceed the range of 10-2, which is below the forward-error-correction (FEC) threshold. Hence, it eradicates the ability of an eavesdropper to properly decode the transmitted signal. Additionally, the efficiency of SA-SM is verified in both the radio and visible light ranges. Furthermore, SA-SM is capable of reducing the peak-to-average-power-ratio (PAPR) by 26.2%.

The rapid growth of the connected devices driven by Internet of Things (IoT) concept requires a complete rethinking of the conventional approaches for the network design. One of the key constraints of the IoT devices are their low capabilities in order to optimize energy consumption. On the other hand, many IoT applications require high level of data protection and privacy, which can be provided only by advanced cryptographic algorithms, which are not feasible for IoT devices. In this paper, we propose a scalable quadrature modulation aiming to solve the problem of secure communications at the physical layer. The key idea of the proposed approach is to transmit only part of information in way that allows target receiver to retrieve the complete information. Such approach allows to ensure the security of wireless channel, while reducing the overhead of advanced cryptographic algorithms.

With the improvement in technology and with the increase in the use of wireless devices there is deficiency of radio spectrum. Cognitive radio is considered as the solution for this problem. Cognitive radio is capable to detect which communication channels are in use and which are free, and immediately move into free channels while avoiding the used ones. This increases the usage of radio frequency spectrum. Any wireless system is prone to attack. Likewise, the main two attacks in the physical layer of cognitive radio are Primary User Emulation Attack (PUEA) and replay attack. This paper focusses on mitigating these two attacks with the aid of authentication tag and distance calculation. Mitigation of these attacks results in error free transmission which in turn fallouts in efficient dynamic spectrum access.

The conventional physical-layer (PHY) security approaches, e.g., transmit beamforming and artificial noise (AN)-based design, may fail when the channels of legitimate user (LU) and eavesdropper (Eve) are close correlated. Due to the highly directional transmission feature of millimeter-wave (mmWave), this may occur in mmWave transmissions as the transmitter, Eve and LU are aligned in the same direction exactly. To handle the PHY security problem with directionally-aligned LU and Eve, we propose a novel frequency diverse array (FDA) beamforming approach to differentiating the LU and Eve. By intentionally introducing some frequency offsets across the antennas, the FDA beamforming generates an angle-range dependent beampattern. As a consequence, it can degrade the Eve's reception and thus achieve PHY security. In this paper, we maximize the secrecy rate by jointly optimizing the frequency offsets and the beamformer. This secrecy rate maximization (SRM) problem is hard to solve due to the tightly coupled variables. Nevertheless, we show that it can be reformulated into a form depending only on the frequency offsets. Building upon this reformulation, we identify some cases where the SRM problem can be optimally solved in closed form. Numerical results demonstrate the efficacy of FDA beamforming in achieving PHY security, even for aligned LU and Eve.

After being widely studied in theory, physical layer security schemes are getting closer to enter the consumer market. Still, a thorough practical analysis of their resilience against attacks is missing. In this work, we use software-defined radios to implement such a physical layer security scheme, namely, orthogonal blinding. To this end, we use orthogonal frequency-division multiplexing (OFDM) as a physical layer, similarly to WiFi. In orthogonal blinding, a multi-antenna transmitter overlays the data it transmits with noise in such a way that every node except the intended receiver is disturbed by the noise. Still, our known-plaintext attack can extract the data signal at an eavesdropper by means of an adaptive filter trained using a few known data symbols. Our demonstrator illustrates the iterative training process at the symbol level, thus showing the practicability of the attack.

The passive radar also known as Green Radar exploits the available commercial communication signals and is useful for target tracking and detection in general. Recent communications standards frequently employ Orthogonal Frequency Division Multiplexing (OFDM) waveforms and wideband for broadcasting. This paper focuses on the recent developments of the target detection algorithms in the OFDM passive radar framework where its channel estimates have been derived using the matched filter concept using the knowledge of the transmitted signals. The MUSIC algorithm, which has been modified to solve this two dimensional delay-Doppler detection problem, is first reviewed. As the target detection problem can be represented as sparse signals, this paper employs compressive sensing to compare with the detection capability of the 2-D MUSIC algorithm. It is found that the previously proposed single time sample compressive sensing cannot significantly reduce the leakage from the direct signal component. Furthermore, this paper proposes the compressive sensing method utilizing multiple time samples, namely l1-SVD, for the detection of multiple targets. In comparison between the MUSIC and compressive sensing, the results show that l1-SVD can decrease the direct signal leakage but its prerequisite of computational resources remains a major issue. This paper also presents the detection performance of these two algorithms for closely spaced targets.

A technical method regarding to the improvement of transmission capacity of an optical wireless orthogonal frequency division multiplexing (OFDM) link based on a visible light emitting diode (LED) is proposed in this paper. An original OFDM signal, which is encoded by various multilevel digital modulations such as quadrature phase shift keying (QPSK), and quadrature amplitude modulation (QAM), is converted into a sparse one and then compressed using an adaptive sampling with inverse discrete cosine transform, while its error-free reconstruction is implemented using a L1-minimization based on a Bayesian compressive sensing (CS). In case of QPSK symbols, the transmission capacity of the optical wireless OFDM link was increased from 31.12 Mb/s to 51.87 Mb/s at the compression ratio of 40 %, while It was improved from 62.5 Mb/s to 78.13 Mb/s at the compression ratio of 20 % under the 16-QAM symbols in the error free wireless transmission (forward error correction limit: bit error rate of 10-3).

Secret key establishment is considered to be one of the main challenging issues in cryptography. Many security algorithms are implemented in practice using complicated mathematical methods to exchange secret keys, but those methods are not desirable in power limited terminals such as cellular and sensor networks. In this paper, we propose a physical layer method for exchanging secret key bits in precoding based multi-input multi-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems. The proposed method uniquely relates the key bits to the indices of the precoding matrix used for MIMO channel precoding. The basic idea of the technique is to utilize a MIMO-OFDM precoding codebook. Comparative analysis with respect to the average number of mismatch bits, named key error rate (KER), shows an interesting lead for the new method relative to existing work. In addition, it will be shown that the proposed technique requires lower computation per byte per secret key.

Discrete fractional Fourier transform (DFRFT) is a generalization of discrete Fourier transform. There are a number of DFRFT proposals, which are useful for various signal processing applications. This paper investigates practical solutions toward the construction of unconditionally secure communication systems based on DFRFT via cross-layer approach. By introducing a distort signal parameter, the sender randomly flip-flops between the distort signal parameter and the general signal parameter to confuse the attacker. The advantages of the legitimate partners are guaranteed. We extend the advantages between legitimate partners via developing novel security codes on top of the proposed cross-layer DFRFT security communication model, aiming to achieve an error-free legitimate channel while preventing the eavesdropper from any useful information. Thus, a cross-layer strong mobile communication secure model is built.
 

Wireless information security generates shared secret keys from reciprocal channel dynamics. Current solutions are mostly based on temporal per-frame channel measurements of signal strength and suffer from low key generate rate (KGR), large budget in channel probing, and poor secrecy if a channel does not temporally vary significantly. This paper designs a cross-layer solution that measures noise-free per-symbol channel dynamics across both time and frequency domain and derives keys from the highly fine-grained per-symbol reciprocal channel measurements. This solution consists of merits that: (1) the persymbol granularity improves the volume of available uncorrelated channel measurements by orders of magnitude over per-frame granularity in conventional solutions and so does KGR; 2) the solution exploits subtle channel fluctuations in frequency domain that does not force users to move to incur enough temporal variations as conventional solutions require; and (3) it measures noise-free channel response that suppresses key bit disagreement between trusted users. As a result, in every aspect, the proposed solution improves the security performance by orders of magnitude over conventional solutions. The performance has been evaluated on both a GNU SDR testbed in practice and a local GNU Radio simulator. The cross-layer solution can generate a KGR of 24.07 bits per probing frame on testbed or 19 bits in simulation, although conventional optimal solutions only has a KGR of at most one or two bit per probing frame. It also has a low key bit disagreement ratio while maintaining a high entropy rate. The derived keys show strong independence with correlation coefficients mostly less than 0.05. Furthermore, it is empirically shown that any slight physical change, e.g. a small rotation of antenna, results in fundamentally different cross-layer frequency measurements, which implies the strong secrecy and high efficiency of the proposed solution.