ESWeek 2015

event

Visible to the public  Tutotial at ESWEEK 2015: Parameter-Invariant Monitor Design for Cyber Physical Systems
Oct 04, 2015 1:30 pm - 5:30 pm CEST

Submitted by sokolsky on Tue, 09/22/2015 - 2:03am

With recent advances in low-power low-cost communication, sensing, and actuation technologies, Cyber Physical Systems (CPS) have revolutionized automated medical diagnostics and care, building energy management, and smart grids. With this revolution, dawns a new era of CPS monitoring where fusing measurements from multiple devices provides unprecedented early detection of critical events. However, in some applications (e.g. medical diagnostics) explicit models and/or rich training data relating available measurements to events are unavailable or impractical.

event

Visible to the public  WESE 2015
Oct 08, 2015 8:00 am - 5:00 pm CEST

Submitted by Anonymous on Wed, 07/08/2015 - 3:54pm

The WESE workshop series aims to bring researchers, educators, and industrial representatives together to assess needs and share design, research, and experiences in embedded and cyber-physical systems education. Embedded and cyber-physical systems design requires multidisciplinary skills from areas such as control and signal processing theory, electronics, computer engineering and science, networking, physical systems modeling, etc., as well as application domain knowledge.

event

Visible to the public  WESS 2015
Oct 08, 2015 8:00 am - 5:00 pm CEST

Submitted by Anonymous on Fri, 06/19/2015 - 12:25pm

10th Workshop on Embedded Systems Security (WESS 2015)

A Workshop of the Embedded Systems Week (ESWEEK 2015)

October 8, 2015 | Amsterdam, The Netherlands | http://www.wess-workshop.org/

About WESS

event

Visible to the public  REES 2015
Oct 08, 2015 8:00 am - 5:00 pm CEST

Submitted by Anonymous on Fri, 06/19/2015 - 11:54am

1st International ESWEEK Workshop on Resiliency in Embedded Electronic Systems (REES 2015)

With the sheer complexity of hardware and software systems, resiliency became a major challenge in embedded systems design, manufacturing, and operation. For industrial applications several standards such as ISO26262, IEC61508 or DO-254 prescribe a well-defined level of reliability, robustness, and fault-tolerance.

event

Visible to the public  EWiLi'15
Oct 08, 2015 8:00 am - 5:00 pm CEST

Submitted by Anonymous on Wed, 05/27/2015 - 3:21pm

EWiLi'15, the 5th Embedded Operating System Workshop

Held in conjunction with ESWEEK October the 8th 2015, Amsterdam, The Netherlands

Submission deadline: 31 July 2015
http://syst.univ-brest.fr/ewili2015/

Aim and Scopes

event

Visible to the public  CODES+ISSS 2015
Oct 04, 2015 8:00 am - Oct 09, 2015 5:00 pm CEST

Submitted by Anonymous on Thu, 04/16/2015 - 3:22pm

About CODES+ISSS

The International Conference on Hardware/Software Codesign and System Synthesis is the premier event in the design, modeling, analysis, and implementation of modern embedded systems, from system-level specification and optimization to hardware/software implementation. The conference is a forum for active discussions on various topics of current and future importance to designers and researchers. The program of the conference brings together the latest and the best in academic and industrial research and development.

event

Visible to the public  CyPhy'15
Oct 08, 2015 8:00 am - 5:00 pm CEST

Submitted by Anonymous on Mon, 04/13/2015 - 9:21am

The Fifth International Workshop on Design, Modeling and Evaluation of Cyber Physical Systems (CyPhy'15)

(Held in conjunction with ESWEEK 2015)

event

Visible to the public  ESWeek 2015
Oct 04, 2015 8:00 am - Oct 09, 2015 5:00 pm CEST

Submitted by Anonymous on Mon, 01/12/2015 - 12:29pm

Embedded Systems Week (ESWEEK) is the premier event covering all aspects of embedded systems and software. By bringing together three leading conferences (CASES, CODES+ISSS, and EMSOFT), two symposia (ESTIMedia and RSP) and several workshops and tutorials, ESWeek allows attendees to benefit from a wide range of topics covering the state of the art in embedded systems research and development.

One registration, three conferences