Biblio

The fingerprint sensor based on pMUTs was reported [1]. Spatial resolution of the image depends on the size of the acoustic source when a plane wave is used. If the size of the acoustic source is smaller, piezoelectric films with high dielectric constant are required. In this study, in order to obtain small acoustic source, we proposed Pb(Zrx Th-x)O3 (PZT) epitaxial transducers with high dielectric constant. PbTiO3 (PTO) epitaxial films were grown on conductive La-SrTiO3 (STO) substrate by RF magnetron sputtering. Longitudinal wave conversion loss of PTO transducers was measured by a network analyzer. The thermoplastic elastomer was used instead of real fingerprint. We confirmed that conversion loss of piezoelectric film/substrate structure was increased by contacting the elastomer due the change of reflection coefficient of the substrate bottom/elastomer interface. Minimum conversion loss images were obtained by mechanically scanning the soft probe on the transducer surface. We achieved the detection of the fingerprint phantom based on the elastomer in the GHz.

Windows is one of the popular operating systems in use today, while Universal Serial Bus (USB) is one of the mechanisms used by many people with practical plug and play functions. USB has long been used as a vector of attacks on computers. One method of attack is Keylogger. The Keylogger can take advantage of existing vulnerabilities in the Windows 10 operating system attacks carried out in the form of recording computer keystroke activity without the victim knowing. In this research, an attack will be carried out by running a Powershell Script using BadUSB to be able to activate the Keylogger program. The script is embedded in the Arduino Pro Micro device. The results obtained in the Keyboard Injection Attack research using Arduino Pro Micro were successfully carried out with an average time needed to run the keylogger is 7.474 seconds with a computer connected to the internet. The results of the keylogger will be sent to the attacker via email.

Recently, as the threat of Distributed Denial-of-Service attacks exploiting IoT devices has spread, source-side Denial-of-Service attack detection methods are being studied in order to quickly detect attacks and find their locations. Moreover, to mitigate the limitation of local view of source-side detection, a collaborative attack detection technique is required to share detection results on each source-side network. In this paper, a new collaborative source-side DDoS attack detection method is proposed for detecting DDoS attacks on multiple networks more correctly, by considering the detecting performance on different time zone. The results of individual attack detection on each network are weighted based on detection rate and false positive rate corresponding to the time zone of each network. By gathering the weighted detection results, the proposed method determines whether a DDoS attack happens. Through extensive evaluation with real network traffic data, it is confirmed that the proposed method reduces false positive rate by 35% while maintaining high detection rate.

Multi-party and multi-layer nature of 5G networks implies the inherent distribution of management and orchestration decisions across multiple entities. Therefore, responsibility for management decisions concerning end-to-end services become blurred if no efficient liability and accountability mechanism is used. In this paper, we present the design, building blocks and challenges of a Liability-Aware Security Management (LASM) system for 5G. We describe how existing security concepts such as manifests and Security-by-Contract, root cause analysis, remote attestation, proof of transit, and trust and reputation models can be composed and enhanced to take risk and responsibilities into account for security and liability management.

Nowadays, blockchain is very common and widely used in various fields. The properties of blockchain-based algorithms such as being decentralized and uncontrolled by institutions and governments, are the main reasons that has attracted many applications. The security and the scalability limitations are the main challenges for the development of these systems. Using second layer network is one of the various methods proposed to improve the scalability of these systems. This network can increase the total number of transactions per second by creating extra channels between the nodes that operate in a different layer not obligated to be on consensus ledger. In this paper, the optimal structure for the second layer network has been presented. In the proposed structure we try to distribute the parameters of the second layer network as symmetrically as possible. To prove the optimality of this structure we first introduce the maximum scalability bound, and then calculate it for the proposed structure. This paper will show how the second layer method can improve the scalability without any information about the rate of transactions between nodes.

Throughout the Department of Defense, there are ongoing efforts to increase cybersecurity and improve data transfer in unmanned robotic systems (UxS). This paper explores the performance of the Robot Operating System (ROS) 2, which is built with the Data Distribution Service (DDS) standard as a middleware. Based on how quality of service (QoS) parameters are defined in the robotic middleware interface, it is possible to implement strict delivery requirements to different nodes on a dynamic nodal network with multiple unmanned systems connected. Through this research, different scenarios with varying QoS settings were implemented and compared to baseline values to help illustrate the impact of latency and throughput on data flow. DDS security settings were also enabled to help understand the cost of overhead and performance when secured data is compared to plaintext baseline values. Our experiments were performed using a basic ROS 2 network consisting of two nodes (one publisher and one subscriber). Our experiments showed a measurable latency and throughput change between different QoS profiles and security settings. We analyze the trends and tradeoffs associated with varying QoS and security settings. This paper provides performance data points that can be used to help future researchers and developers make informative choices when using ROS 2 for UxS.

Cyber threat intelligence (CTI) is an effective approach to improving cyber security of businesses. CTI provides information of business contexts affected by cyber threats and the corresponding countermeasures. If businesses can identify relevant CTI, they can take defensive actions before the threats, described in the relevant CTI, take place. However, businesses still lack knowledge to help identify relevant CTI. Furthermore, information in real-world systems is usually vague, imprecise, inconsistent and incomplete. This paper defines a business object that is a business context surrounded by CTI. A business object models the connection knowledge for CTI onto the business. To assemble the business objects, this paper proposes a novel representation of business oriented CTI and a system used for constructing and extracting the business objects. Generalised grey numbers, fuzzy sets and rough sets are used for the representation, and set approximations are used for the extraction of the business objects. We develop a prototype of the system and use a case study to demonstrate how the system works. We then conclude the paper together with the future research directions.

This paper describe most popular IoT protocols used for IoT embedded systems and research their advantage and disadvantage. Hardware stage used in this experiment is described in this article - it is used Esp32 and programming language C. It is very important to use corrected IoT protocol that is determines of purpose, hardware and software of system. There are so different IoT protocols, because they are cover vary requirements for vary cases.

Ultra-Reliable Low Latency Communications (URLLC) has been always a vital component of many industrial applications. The paper proposes a new wireless URLLC solution called RETIS, which is suitable for factory automation and fast process control applications, where low latency, low jitter, and high data exchange rates are mandatory. In the paper, we describe the communication protocol as well as the hardware structure of the network nodes for implementing the required functionality. Many techniques enabling fast, reliable wireless transmissions are used - short Transmission Time Interval (TTI), TimeDivision Multiple Access (TDMA), MIMO, optional duplicated data transfer, Forward Error Correction (FEC), ACK mechanism. Preliminary tests show that reliable endto-end latency down to 350 μs and packet exchange rate up to 4 kHz can be reached (using quadruple MIMO and standard IEEE 802.15.4 PHY at 250 kbit/s).

Accessing the secured data through the network is a major task in emerging technology. Data needs to be protected from the network vulnerabilities, malicious users, hackers, sniffers, intruders. The novel framework has been designed to provide high security in data transaction through computer network. The implant of network amalgamation in the recent trends, make the way in security enhancement in an efficient manner through the machine learning algorithm. In this system the usage of the biometric authenticity plays a vital role for unique approach. The novel mathematical approach is used in machine learning algorithms to solve these problems and provide the security enhancement. The result shows that the novel method has consistent improvement in enhancing the security of data transactions in the emerging technologies.

With the rapid development of Internet technology, the era of big data is coming. SQL injection attack is the most common and the most dangerous threat to database. This paper studies the working mode and workflow of the GreenSQL database firewall. Based on the analysis of the characteristics and patterns of SQL injection attack command, the input model of GreenSQL learning is optimized by constructing the patterned input and optimized whitelist. The research method can improve the learning efficiency of GreenSQL and intercept samples in IPS mode, so as to effectively maintain the security of background database.

Today the integrity of digital documents and the authenticity of their origin is often hard to verify. Existing Public Key Infrastructures (PKIs) are capable of certifying digital identities but do not provide solutions to immutably store signatures, and the process of certification is often not transparent. In this work we propose Veritaa, a Distributed Public Key Infrastructure and Signature Store (DPKISS). The major innovation of Veritaa is the Graph of Trust, a directed graph that uses relations between identity claims to certify the identities and stores signed relations to digital document identifiers. The distributed architecture of Veritaa and the Graph of Trust enables a transparent certification process. To ensure non-repudiation and immutability of all actions that have been signed on the Graph of Trust, an application specific Distributed Ledger Technology (DLT) is used as secure storage. In this work a reference implementation of the proposed architecture was designed and implemented. Furthermore, a testbed was created and used for the evaluation of Veritaa. The evaluation of Veritaa shows the benefits and the high performance of the proposed architecture.

Static analysis tools are programs that run on source code prior to their compilation to binary executables and attempt to find flaws or defects in the code during the early stages of development. If left unresolved, these flaws could pose security risks. While numerous static analysis tools exist, there is no single tool that is optimal. Therefore, many static analysis tools are often used to analyze code. Further, some of the alerts generated by the static analysis tools are low-priority or false alarms. Machine learning algorithms have been developed to distinguish between true alerts and false alarms, however significant man hours need to be dedicated to labeling data sets for training. This study investigates the use of active learning to reduce the number of labeled alerts needed to adequately train a classifier. The numerical experiments demonstrate that a query by committee active learning algorithm can be utilized to significantly reduce the number of labeled alerts needed to achieve similar performance as a classifier trained on a data set of nearly 60,000 labeled alerts.

Incident prioritization is nowadays a part of many approaches and tools for network security and risk management. However, the dynamic nature of the problem domain is often unaccounted for. That is, the prioritization is typically based on a set of static calculations, which are rarely adjusted. As a result, incidents are incorrectly prioritized, leading to an increased and misplaced effort in the incident response. A higher degree of automation could help to address this problem. In this paper, we explicitly consider flaws in the prioritization an unalterable circumstance. We propose an adaptive incident prioritization, which allows to automate certain tasks for the prioritization model management in order to continuously assess and improve a prioritization model. At the same time, we acknowledge the human analyst as the focal point and propose to keep the human in the loop, among others by treating understandability as a crucial requirement.

The massive adoption of mobile devices by both individuals and companies is raising many security concerns. The fact that such devices are handling sensitive data makes them a target for attackers. Many attack prevention mechanisms are deployed with a last line of defense that focuses on the containment principle. Currently, iOS treats each 3rd party application alike which may lead to security flaws. We propose a framework in which each application has a custom sandboxed environment. We investigated the current confinement architecture used by Apple and built a solution on top of it.

Cyber-physical systems are characterized by strong interactions between their physical and computation parts. The increasing complexity of such systems, now used in numerous application domains (e.g., aeronautics, healthcare), in conjunction with hard to predict surrounding environments or the use of non-traditional middleware and with the presence of non-deterministic or non-explainable software outputs, tend to make traditional Verification and Validation (V&V) techniques ineffective. This paper presents the H2020 ADVANCE project, which aims precisely at addressing the Verification and Validation challenges that the next-generation of cyber-physical systems bring, by exploring techniques, methods and tools for achieving the technical objective of improving the overall efficiency and effectiveness of the V&V process. From a strategic perspective, the goal of the project is to create an international network of expertise on the topic of V&V of cyber-physical systems.

Although beamforming optimization problems in full-duplex communication systems can be optimally solved with the semidefinite relaxation (SDR) approach, its computational complexity increases rapidly when the problem size increases. In order to circumvent this issue, in this paper, we propose an alternating direction of multiplier method (ADMM) which minimizes the augmented Lagrangian of the dual of the SDR and handles the inequality constraints with the use of slack variables. The proposed ADMM is then applied for optimizing the relay beamformer to maximize the secrecy rate. Simulation results show that the proposed ADMM performs as good as the SDR approach.

As power grid control systems become increasingly automated and distributed, security has become a significant design concern. Systems increasingly expose new avenues, at a variety of levels, for attackers to exploit and enable widespread disruptions and/or surveillance. Much prior work has explored the implications of attack models focused on false data injection at the front-end of the control system (i.e. during state estimation) [1]. Instead, in this paper we focus on characterizing the inherent cyber-attack vulnerabilities with power flow. Power flow (and power flow constraints) are at the core of many applications critical to operation of power grids (e.g. state estimation, economic dispatch, contingency analysis, etc.). We propose two algorithmic approaches for characterizing the vulnerability of buses within power grids to cyber-attacks. Specifically, we focus on measuring the instability of power flow to attacks which manifest as either voltage or power related errors. Our results show that attacks manifesting as voltage errors are an order of magnitude more likely to cause instability than attacks manifesting as power related errors (and 5x more likely for state estimation as compared to power flow).

A recent proposed physical layer encryption technique uses an all-optical setup based on spatial light modulators to split two or more wavelength division multiplexed (WDM) signals in several spectral slices and to shuffle these slices. As a result, eavesdroppers aimed to recover information from a single target signal need to handle all the signals involved in the shuffling process. In this work, computer simulations are used to analyse the case where the shuffled signals propagate through different optical routes. From a security point of view, this is an interesting possibility because it obliges eavesdroppers to tap different optical fibres/ cables. On the other hand, each shuffled signal experiences different physical impairments and the deleterious consequences of these effects must be carefully investigated. Our results indicate that, in a metropolitan area network environment, penalties caused by attenuation and dispersion differences may be easily compensated with digital signal processing algorithms that are presently deployed.

TEE(Trusted Execution Environment) has became one of the most popular security features for mobile platforms. Current TEE solutions usually implement secure functions in Trusted applications (TA) running over a trusted OS in the secure world. Host App may access these secure functions through the TEE driver. Unfortunately, such architecture is not very secure. A trusted OS has to be loaded in secure world to support TA running. Thus, the code size in secure world became large. As more and more TA is installed, the secure code size will be further larger and larger. Lots of real attack case have been reported [1]. In this paper, we present a novel TEE constructing method named ALTEE. Different from existing TEE solutions, ALTEE includes secure code in host app, and constructs a trustworthy execution environment for it dynamically whenever the code needs to be run.

Organizations perform security analysis for assessing network health and safe-guarding their growing networks through Vulnerability Assessments (AKA VA Scans). The output of VA scans is reports on individual hosts and its vulnerabilities, which, are of little use as the origin of the attack can't be located from these. Attack Graphs, generated without an in-depth analysis of the VA reports, are used to fill in these gaps, but only provide cursory information. This study presents an effective model of depicting the devices and the data flow that efficiently identifies the weakest nodes along with the concerned vulnerability's origin.The complexity of the attach graph using MulVal has been greatly reduced using the proposed approach of using the risk and CVSS base score as evaluation criteria. This makes it easier for the user to interpret the attack graphs and thus reduce the time taken needed to identify the attack paths and where the attack originates from.

Internet of Things devices have spread to near ubiquity this decade. All around us now lies an invisible mesh of communication from devices embedded in seemingly everything. Inevitably some of that communication flying around our heads will contain data that must be protected or otherwise shielded from tampering. The responsibility to protect this sensitive information from malicious actors as it travels through the air then falls upon the standards used to communicate this data. Bluetooth Low Energy (BLE) is one of these standards, the aim of this paper is to put its security standards to test. By attempting to exploit its vulnerabilities we can see how secure this standard really is. In this paper, we present steps for analyzing the security of BLE devices using open-source hardware and software.

Anonymity platforms route the traffic over a network of special routers that are known as mixes and implement various traffic disruption techniques to hide the communicating users' identities. Batch mixes in particular anonymize communicating peers by allowing message exchange to take place only after a sufficient number of messages (a batch) accumulate, thus introducing delay. We introduce a queueing model for batch mix and study its delay properties. Our analysis shows that delay of a batch mix grows quickly as the batch size gets close to the number of senders connected to the mix. We then propose a randomized batch mixing strategy and show that it achieves much better delay scaling in terms of the batch size. However, randomization is shown to reduce the anonymity preserving capabilities of the mix. We also observe that queueing models are particularly useful to study anonymity metrics that are more practically relevant such as the time-to-deanonymize metric.

In recent years, the demand for high reliability in industrial wireless communication has been increasing. To meet the strict requirement, many researchers have studied various bit interleaving coding schemes for long packet transmission in industrial wireless networks. Current research shows that the use of bit interleaving structure can improve the performance of the communication system for long packet transmission, but to improve reliability of industrial wireless communications by combining the bit interleaving and channel coding for short packets still requires further analysis. With this aim, bit interleaving structure is applied to convolution code coding scheme for short packet transmission in this paper. We prove that the use of interleaver fail to improve the reliability of data transmission under the circumstance of short packet transmission.

Large-scale blackouts that have occurred in the past few decades have necessitated the need to do extensive research in the field of grid security assessment. With the aid of synchrophasor technology, which uses phasor measurement unit (PMU) data, dynamic security assessment (DSA) can be performed online. However, existing applications of DSA are challenged by variability in system conditions and unaccounted for measurement errors. To overcome these challenges, this research develops a DSA scheme to provide security prediction in real-time for load profiles of different seasons in presence of realistic errors in the PMU measurements. The major contributions of this paper are: (1) develop a DSA scheme based on PMU data, (2) consider seasonal load profiles, (3) account for varying penetrations of renewable generation, and (4) compare the accuracy of different machine learning (ML) algorithms for DSA with and without erroneous measurements. The performance of this approach is tested on the IEEE-118 bus system. Comparative analysis of the accuracies of the ML algorithms under different operating scenarios highlights the importance of considering realistic errors and variability in system conditions while creating a DSA scheme.