Biblio

Internet Protocol Version 6 (IPv6) is expected for widespread deployment worldwide. Such rapid development of IPv6 may lead to safety problems. The main threats in IPv6 networks are denial of service (DoS) attacks and distributed DoS (DDoS) attacks. In addition to the similar threats in Internet Protocol Version 4 (IPv4), IPv6 has introduced new potential vulnerabilities, which are DoS and DDoS attacks based on Internet Control Message Protocol version 6 (ICMPv6). We divide such new attacks into two categories: pure flooding attacks and source address spoofing attacks. We propose P4-NSAF, a scheme to defend against the above two IPv6 DoS and DDoS attacks in the programmable data plane. P4-NSAF uses Count-Min Sketch to defend against flooding attacks and records information about IPv6 agents into match tables to prevent source address spoofing attacks. We implement a prototype of P4-NSAF with P4 and evaluate it in the programmable data plane. The result suggests that P4-NSAF can effectively protect IPv6 networks from DoS and DDoS attacks based on ICMPv6.

The interaction between the transmission system of doubly-fed wind farms and the power grid and the stability of the system have always been widely concerned at home and abroad. In recent years, wind farms have basically installed static var generator (SVG) to improve voltage stability. Therefore, this paper mainly studies the subsynchronous oscillation (SSO) problem in the grid-connected grid-connected doubly-fed wind farm with static var generators. Firstly based on impedance analysis, the sequence impedance model of the doubly-fed induction generator and the static var generator is established by the method. Then, based on the stability criterion of Bode plot and time domain simulation, the influence of the access of the static var generator on the SSO of the system is analyzed. Finally, the sensitivity analysis of the main parameters of the doubly-fed induction generator and the static var generator is carried out. The results show that the highest sensitivity is the proportional gain parameter of the doubly-fed induction generator current inner loop, and its value should be reduced to reduce the risk of SSO of the system.

Distributed ledger technologies (DLTs) based on Directed Acyclic Graphs (DAGs) have been gaining much attention due to their performance advantage over the traditional blockchain. IOTA is an example of DAG-based DLT that has shown its significance in the Internet of Things (IoT) environment. Despite that, IOTA is vulnerable to double-spend attacks, which threaten the immutability of the ledger. In this paper, we propose an efficient yet simple method for detecting a parasite chain, which is one form of attempting a double-spend attack in the IOTA network. In our method, a score function measuring the importance of each transaction in the IOTA network is employed. Any abrupt change in the importance of a transaction is reflected in the 1st and 2nd order derivatives of this score function, and therefore used in the calculation of an anomaly score. Due to how the score function is formulated, this anomaly score can be used in the detection of a particular type of parasite chain, characterized by sudden changes in the in-degree of a transaction in the IOTA graph. The experimental results demonstrate that the proposed method is accurate and linearly scalable in the number of edges in the network.

Nowadays, microservice architecture is known as a successful and promising architecture for smart city applications. Applying microservices in the designing and implementation of systems has many advantages such as autonomy, loosely coupled, composability, scalability, fault tolerance. However, the complexity of calling between microservices leads to problems in security, accessibility, and data management in the execution of systems. In order to address these challenges, in recent years, various researchers and developers have focused on the use of microservice patterns in the implementation of microservice-based systems. Microservice patterns are the result of developers’ successful experiences in addressing common challenges in microservicebased systems. However, hitherto no guideline has been provided for an in-depth understanding of microservice patterns and how to apply them to real systems. The purpose of this paper is to investigate in detail the most widely used and important microservice patterns in order to analyze the function of each pattern, extract the behavioral signatures and construct a service dependency graph for them so that researchers and enthusiasts use the provided guideline to create a microservice-based system equipped with design patterns. To construct the proposed guideline, five real open source projects have been carefully investigated and analyzed and the results obtained have been used in the process of making the guideline.

Malware created by the Advanced Persistent Threat (APT) groups do not typically carry out the attacks in a single stage. The “Cyber Kill Chain” framework developed by Lockheed Martin describes an APT through a seven stage life cycle [5] . APT groups are generally nation state actors [1] . They perform highly targeted attacks and do not stop until the goal is achieved [7] . Researchers are always working toward developing a system and a process to create an environment safe from APT type attacks [2] . In this paper, the threat considered is ransomware which are developed by APT groups. WannaCry is an example of a highly sophisticated ransomware created by the Lazurus group of North Korea and its level of sophistication is evident from the existence of a contingency plan of attack upon being discovered [3] [6] . The major contribution of this research is the analysis of APT type ransomware using game theory to present optimal strategies for the defender through the development of equilibrium solutions when faced with APT type ransomware attack. The goal of the equilibrium solutions is to help the defender in preparedness before the attack and in minimization of losses during and after the attack.

Cloud computing forms the backbone of the era of automation and the Internet of Things (IoT). It offers computing and storage-based services on consumption-based pricing. Large-scale datacenters are used to provide these service and consumes enormous electricity. Datacenters contribute a large portion of the carbon footprint in the environment. Through virtual machine (VM) consolidation, datacenter energy consumption can be reduced via efficient resource management. VM selection policy is used to choose the VM that needs migration. In this research, we have proposed PbV mSp: A priority-based VM selection policy for VM consolidation. The PbV mSp is implemented in cloudsim and evaluated compared with well-known VM selection policies like gpa, gpammt, mimt, mums, and mxu. The results show that the proposed PbV mSp selection policy has outperformed the exisitng policies in terms of energy consumption and other metrics.

This document addresses the issue of the actual security level of PDF documents. Two types of detection approaches are utilized to detect dangerous elements within malware: static analysis and dynamic analysis. Analyzing malware binaries to identify dangerous strings, as well as reverse-engineering is included in static analysis for t1he malware to disassemble it. On the other hand, dynamic analysis monitors malware activities by running them in a safe environment, such as a virtual machine. Each method has its own set of strengths and weaknesses, and it is usually best to employ both methods while analyzing malware. Malware detection could be simplified without sacrificing accuracy by reducing the number of malicious traits. This may allow the researcher to devote more time to analysis. Our worry is that there is no obvious need to identify malware with numerous functionalities when it isn't necessary. We will solve this problem by developing a system that will identify if the given file is infected with malware or not.

Domestic robots and agents are widely sold to the grand public, leading us to ethical issues related to the data harvested by such machines. While users show a general acceptance of these robots, concerns remain when it comes to information security and privacy. Current research indicates that there’s a privacy-security trade-off for better use, but the anthropomorphic and social abilities of a robot are also known to modulate its acceptance and use. To explore and deepen what literature already brought on the subject we examined how users perceived their robot (Replika, Roomba©, Amazon Echo©, Google Home©, or Cozmo©/Vector©) through an online questionnaire exploring acceptance, perceived privacy and security, anthropomorphism, disclosure, perceived intimacy, and loneliness. The results supported the literature regarding the potential manipulative effects of robot’s anthropomorphism for acceptance but also information disclosure, perceived intimacy, security, and privacy.

Wireless Sensor Networks (WSN) have assisted applications of multi-agent system. Abundant sensor nodes, densely distributed around a base station (BS), collect data and transmit to BS node for data analysis. The concept of cluster has been emerged as the efficient communication structure in resource-constrained environment. However, the security still remains a major concern due to the vulnerability of sensor nodes. In this paper, we propose a percolation-based secure routing protocol. We leverage the trust score composed of three indexes to select cluster heads (CH) for unevenly distributed clusters. By considering the reliability, centrality and stability, legitimate nodes with social trust and adequate energy are chosen to provide relay service. Moreover, we design a multi-path inter-cluster routing protocol to construct CH chains for directed inter-cluster data transmission based on the percolation. And the measurement of transit score for on-path CH nodes contributes to load balancing and security. Our simulation results show that our protocol is able to guarantee the security to improve the delivery ratio and packets delay.

Simulations have gained paramount importance in terms of software development for wireless sensor networks and have been a vital focus of the scientific community in this decade to provide efficient, secure, and safe communication in smart cities. Network Simulators are widely used for the development of safe and secure communication architectures in smart city. Therefore, in this technical survey report, we have conducted experimental comparisons among ten different simulation environments that can be used to simulate smart-city operations. We comprehensively analyze and compare simulators COOJA, NS-2 with framework Mannasim, NS-3, OMNeT++ with framework Castalia, WSNet, TOSSIM, J-Sim, GloMoSim, SENSE, and Avrora. These simulators have been run eight times each and comparison among them is critically scrutinized. The main objective behind this research paper is to assist developers and researchers in selecting the appropriate simulator against the scenario to provide safe and secure wired and wireless networks. In addition, we have discussed the supportive simulation environments, functions, and operating modes, wireless channel models, energy consumption models, physical, MAC, and network-layer protocols in detail. The selection of these simulation frameworks is based on features, literature, and important characteristics. Lastly, we conclude our work by providing a detailed comparison and describing the pros and cons of each simulator.

Vehicle Ad-Hoc Networks (VANETs) are a special type of Mobile Ad-Hoc Network (MANETs). In VANETs, a group of vehicles communicates with each other to transfer data without a need for a fixed infrastructure. In this paper, we compare the performance of two routing protocols: Ad-hoc on Demand Distance Vector protocol (AODV) and Destination-Sequenced Distance Vector protocol (DSDV) in VANETs. We measure the reliability of each protocol in the packet delivery.

We demonstrated hardware emulations to evaluate the error-correction performance for a FEC scheme with multilevel coding. It has enabled the measurement of BER to reach the order of 10−14 for the decoded signal.

Many organizations use internal phishing campaigns to gauge awareness and coordinate training efforts based on those findings. Ongoing content design is important for phishing training tools due to the influence recency has on phishing susceptibility. Traditional approaches for content development require significant investment and can be prohibitively costly, especially during the requirements engineering phase of software development and for applications that are constantly evolving. While prior research primarily depends upon already known phishing cues curated by experts, our project, Phish Finders, uses crowdsourcing to explore phishing cues through the unique perspectives and thought processes of everyday users in a realistic yet safe online environment, Zooniverse. This paper contributes qualitative analysis of crowdsourced comments that identifies novel cues, such as formatting and typography, which were identified by the crowd as potential phishing indicators. The paper also shows that crowdsourcing may have the potential to scale as a requirements engineering approach to meet the needs of content labeling for improved training tool development.

Inertial Confinement Fusion(ICF) uses the inertia of the substance itself to confine the nest-temperature thermonuclear fuel plasma to achieve thermonuclear fusion and obtain fusion energy. In the design of the local-volume ignition target capsule, the ignition zone and the main combustion zone are separated by heavy medium. The ignition zone is located in the center of the system (the part of the fusion combustion). The mass is small and can be compressed to high density and the overall temperature is raised to the ignition state (local-volume ignition). The temperature increase and density increase of the local volume ignition are relatively decoupled in time. The multi-step enhanced shock wave heats the fuel temperature drop, after which the collision effect accelerates the metal shell layer by layer, and uses the inertia of high-Z metal shell with a larger residual mass to achieve effective compression of the fuel areal after the driving source ends for a long time. Local volume ignition has the advantages of no need to reshape the radiation driving pulse, resistance to the influence of hot electrons, less demanding compression symmetry, and large combustion gain.

Visible light communication (VLC) is a short-range wireless optical communication that can transmit data by switching lighting elements at high speeds in indoor areas. In common areas, VLC can provide data security at every layer of communication by using physical layer security (PLS) techniques as well as existing cryptography-based techniques. In the literature, PLS techniques have generally been studied for monochrome VLC systems, and multicolor VLC studies are quite limited. In this study, to the best of authors’ knowledge, null steering (NS) and artificial noise (AN), which are widely used PLS methods, have been applied to multi-colored LED-based VLC systems for the first time in the literature and the achievable secrecy rate has been calculated.

Physical Layer Security (PLS) is used to accomplish perfect secure communication between intended network nodes, while the eavesdropper gets zero information. In this paper, a smart antenna technology i.e., Massive multiple-input-multiple-output (mMIMO) and Non-Orthogonal Multiple Access (NOMA) technology is being used to enhance the secrecy performance of a 5G communication network. Small scale Rayleigh fading channels, as well as large scale pathway loss, have to be taken into consideration. An eavesdropper with multiple antennas, an amplify-and-forward (AF) relay with multi antenna has been proposed. Spider Monkey Algorithm (SMO) is used in adding Artificial Noise (AN) for refining secrecy rate. The findings revealed that the suggested technique improves the security and the quality of Wireless communication.

This paper presents a physically-secure wireless communication system utilizing orbital angular momentum (OAM) waves at 0.31THz. A trustworthy key distribution mechanism for symmetric key cryptography is proposed by exploiting random hopping among the orthogonal OAM-wave modes and phases. Keccak-f[400] based pseudorandom number generator provides randomness to phase distribution of OAM-wave modes for additional security. We assess the security vulnerabilities of using OAM modulation in a THz communication system under various physical-layer threat models as well as analyze the effectiveness of these threat models for varying attacker complexity levels under different conditions.

The Manufacturer Usage Description (MUD) standard aims to reduce the attack surface for IoT devices by locking down their behavior to a formally-specified set of network flows (access control entries). Formal network behaviors can also be systematically and rigorously verified in any operating environment. Enforcing MUD flows and monitoring their activity in real-time can be relatively effective in securing IoT devices; however, its scope is limited to endpoints (domain names and IP addresses) and transport-layer protocols and services. Therefore, misconfigured or compromised IoTs may conform to their MUD-specified behavior but exchange unintended (or even malicious) contents across those flows. This paper develops PicP-MUD with the aim to profile the information content of packet payloads (whether unencrypted, encoded, or encrypted) in each MUD flow of an IoT device. That way, certain tasks like cyber-risk analysis, change detection, or selective deep packet inspection can be performed in a more systematic manner. Our contributions are twofold: (1) We analyze over 123K network flows of 6 transparent (e.g., HTTP), 11 encrypted (e.g., TLS), and 7 encoded (e.g., RTP) protocols, collected in our lab and obtained from public datasets, to identify 17 statistical features of their application payload, helping us distinguish different content types; and (2) We develop and evaluate PicP-MUD using a machine learning model, and show how we achieve an average accuracy of 99% in predicting the content type of a flow.

Recent trends in the convergence of edge computing and artificial intelligence (AI) have led to a new paradigm of “edge intelligence”, which are more vulnerable to attack such as data and model poisoning and evasion of attacks. This paper proposes a white-box poisoning attack against online regression model for edge intelligence environment, which aim to prepare the protection methods in the future. Firstly, the new method selects data points from original stream with maximum loss by two selection strategies; Secondly, it pollutes these points with gradient ascent strategy. At last, it injects polluted points into original stream being sent to target model to complete the attack process. We extensively evaluate our proposed attack on open dataset, the results of which demonstrate the effectiveness of the novel attack method and the real implications of poisoning attack in a case study electric energy prediction application.

The high maneuverability of the unmanned aerial vehicle (UAV), facilitating fast and flexible deployment of communication infrastructures, brings potentially valuable opportunities to the future wireless communication industry. Nevertheless, UAV communication networks are faced with severe security challenges since air to ground (A2G) communications are more vulnerable to eavesdropping attacks than terrestrial communications. To solve the problem, we propose a coding scheme that hierarchically utilizes polar codes in order to address channel multi-state variation for UAV wiretap channels, without the instantaneous channel state information (CSI) known at the transmitter. The theoretical analysis and simulation results show that the scheme achieves the security capacity of the channel and meets the conditions of reliability and security.

Trust is a cognitive ability that can be dependent on behavioral consistency. In this paper, a partially observable Markov Decision Process (POMDP)-based computational robot-human trust model is proposed for hand-over tasks in human-robot collaborative contexts. The robot's trust in its human partner is evaluated based on the human behavior estimates and object detection during the hand-over task. The human-robot hand-over process is parameterized as a partially observable Markov Decision Process. The proposed approach is verified in real-world human-robot collaborative tasks. Results show that our approach can be successfully applied to human-robot hand-over tasks to achieve high efficiency, reduce redundant robot movements, and realize predictability and mutual understanding of the task.