Biblio

Complex embedded systems often contain hard to find vulnerabilities which, when exploited, have potential to cause severe damage to the operating environment and the user. Given that threats and vulnerabilities can exist within any layer of the complex eco-system, OEMs face a major challenge to ensure security throughout the device life-cycle To lower the potential risk and damage that vulnerabilities may cause, OEMs typically perform application threat analysis and security modelling. This process typically provides a high level guideline to solving security problems which can then be implemented during design and development. However, this concept presents issues where new threats or unknown vulnerability has been discovered. To address this issue, we propose a policy-based security modelling approach, which utilises a configurable policy engine to apply new policies that counter serious threats. By utilising this approach, the traditional security modelling approaches can be enhanced and the consequences of a new threat greatly reduced. We present a realistic use case of connected car, applying several attack scenarios. By utilising STRIDE threat modelling and DREAD risk assessment model, adequate policies are derived to protect the car assets. This approach poses advantages over the standard approach, allowing a policy update to counter a new threat, which may have otherwise required a product redesign to alleviate the issue under the traditional approach.

The risk of cyber-attacks exploiting vulnerable organisations has increased significantly over the past several years. These attacks may combine to exploit a vulnerability breach within a system's protection strategy, which has the potential for loss, damage or destruction of assets. Consequently, every vulnerability has an accompanying risk, which is defined as the "intersection of assets, threats, and vulnerabilities" [1]. This research project aims to experimentally compare the similarity-based ranking of cyber security information utilising a recommendation environment. The Memory-Based Collaborative Filtering technique was employed, specifically the User-Based and Item-Based approaches. These systems utilised information from the National Vulnerability Database, specifically for the identification and similarity-based ranking of cyber-security vulnerability information, relating to hardware and software applications. Experiments were performed using the Item-Based technique, to identify the optimum system parameters, evaluated through the AUC evaluation metric. Once identified, the Item-Based technique was compared with the User-Based technique which utilised the parameters identified from the previous experiments. During these experiments, the Pearson's Correlation Coefficient and the Cosine similarity measure was used. From these experiments, it was identified that utilised the Item-Based technique which employed the Cosine similarity measure, an AUC evaluation metric of 0.80225 was achieved.

Return Oriented Programming is one of the most important software security challenges nowadays. It exploits memory vulnerabilities to control the state of the program and hijacks its control flow. Existing defenses usually focus on how to protect the control flow or face the challenge of how to maintain the taint markings for memory data. In this paper, we directly focus on the adversary-controlled states, simplify the classic dynamic taint analysis method to only track registers and propose Hardware-based Adversary-controlled States Tracking (HAST). HAST dynamically tracks registers that may be controlled by the adversary to detect ROP attack. It is transparent to user application and makes few modifications to existing hardware. Our evaluation demonstrates that HAST will introduce almost no performance overhead and can effectively detect ROP attacks without false positives on the tested common Linux applications.

Despite decades of research on software diversification, only address space layout randomization has seen widespread adoption. Code randomization, an effective defense against return-oriented programming exploits, has remained an academic exercise mainly due to i) the lack of a transparent and streamlined deployment model that does not disrupt existing software distribution norms, and ii) the inherent incompatibility of program variants with error reporting, whitelisting, patching, and other operations that rely on code uniformity. In this work we present compiler-assisted code randomization (CCR), a hybrid approach that relies on compiler-rewriter cooperation to enable fast and robust fine-grained code randomization on end-user systems, while maintaining compatibility with existing software distribution models. The main concept behind CCR is to augment binaries with a minimal set of transformation-assisting metadata, which i) facilitate rapid fine-grained code transformation at installation or load time, and ii) form the basis for reversing any applied code transformation when needed, to maintain compatibility with existing mechanisms that rely on referencing the original code. We have implemented a prototype of this approach by extending the LLVM compiler toolchain, and developing a simple binary rewriter that leverages the embedded metadata to generate randomized variants using basic block reordering. The results of our experimental evaluation demonstrate the feasibility and practicality of CCR, as on average it incurs a modest file size increase of 11.46% and a negligible runtime overhead of 0.28%, while it is compatible with link-time optimization and control flow integrity.

With so much our daily lives relying on digital devices like personal computers and cell phones, there is a growing demand for code that not only functions properly, but is secure and keeps user data safe. However, ensuring this is not such an easy task, and many developers do not have the required skills or resources to ensure their code is secure. Many code analysis tools have been written to find vulnerabilities in newly developed code, but this technology tends to produce many false positives, and is still not able to identify all of the problems. Other methods of finding software vulnerabilities automatically are required. This proof-of-concept study applied natural language processing on Java byte code to locate SQL injection vulnerabilities in a Java program. Preliminary findings show that, due to the high number of terms in the dataset, using singular decision trees will not produce a suitable model for locating SQL injection vulnerabilities, while random forest structures proved more promising. Still, further work is needed to determine the best classification tool.

The communication security issue is of great importance and should not be ignored in backbone optical networks which is undergoing the evolution toward software defined networks (SDN). With the aim to solve this problem, this paper conducts deep analysis into the security challenge of software defined optical networks (SDON) and proposes a so-called security-enhanced signaling scheme of SDON. The proposed scheme makes full advantage of current OpenFIow protocol with some necessary extensions and security improvement, by combining digital signatures and message feedback with efficient PKI (Public Key Infrastructure) in signaling procedure of OpenFIow interaction. Thus, this security-enhanced signaling procedure is also designed in details to make sure the end-to-end trusted service connection. Simulation results show that this proposed approach can greatly improve the security level of large-scale optical network for Energy Internet services with better performance in term of connection success rate performance.

We propose a novel cross-stack sensor framework for realizing lightweight, context-aware, high-interaction network and endpoint deceptions for attacker disinformation, misdirection, monitoring, and analysis. In contrast to perimeter-based honeypots, the proposed method arms production workloads with deceptive attack-response capabilities via injection of booby-traps at the network, endpoint, operating system, and application layers. This provides defenders with new, potent tools for more effectively harvesting rich cyber-threat data from the myriad of attacks launched by adversaries whose identities and methodologies can be better discerned through direct engagement rather than purely passive observations of probe attempts. Our research provides new tactical deception capabilities for cyber operations, including new visibility into both enterprise and national interest networks, while equipping applications and endpoints with attack awareness and active mitigation capabilities.

Assertions are helpful in program analysis, such as software testing and verification. The most challenging part of automatically recommending assertions is to design the assertion patterns and to insert assertions in proper locations. In this paper, we develop Weak-Assert, a weakness-oriented assertion recommendation toolkit for program analysis of C code. A weakness-oriented assertion is an assertion which can help to find potential program weaknesses. Weak-Assert uses well-designed patterns to match the abstract syntax trees of source code automatically. It collects significant messages from trees and inserts assertions into proper locations of programs. These assertions can be checked by using program analysis techniques. The experiments are set up on Juliet test suite and several actual projects in Github. Experimental results show that Weak-Assert helps to find 125 program weaknesses in 26 actual projects. These weaknesses are confirmed manually to be triggered by some test cases.

Industrial control systems (ICS) are systems used in critical infrastructures for supervisory control, data acquisition, and industrial automation. ICS systems have complex, component-based architectures with many different hardware, software, and human factors interacting in real time. Despite the importance of security concerns in industrial control systems, there has not been a comprehensive study that examined common security architectural weaknesses in this domain. Therefore, this paper presents the first in-depth analysis of 988 vulnerability advisory reports for Industrial Control Systems developed by 277 vendors. We performed a detailed analysis of the vulnerability reports to measure which components of ICS have been affected the most by known vulnerabilities, which security tactics were affected most often in ICS and what are the common architectural security weaknesses in these systems. Our key findings were: (1) Human-Machine Interfaces, SCADA configurations, and PLCs were the most affected components, (2) 62.86% of vulnerability disclosures in ICS had an architectural root cause, (3) the most common architectural weaknesses were “Improper Input Validation”, followed by “Im-proper Neutralization of Input During Web Page Generation” and “Improper Authentication”, and (4) most tactic-related vulnerabilities were related to the tactics “Validate Inputs”, “Authenticate Actors” and “Authorize Actors”.

Context: Managing technical debt (TD) associated with potential security breaches found during design can lead to catching vulnerabilities (i.e., exploitable weaknesses) earlier in the software lifecycle; thus, anticipating TD principal and interest that can have decidedly negative impacts on businesses. Goal: To establish an approach to help assess TD associated with security weaknesses by leveraging the Common Weakness Enumeration (CWE) and its scoring mechanism, the Common Weakness Scoring System (CWSS). Method: We present a position study with a five-step approach employing the Quamoco quality model to operationalize the scoring of architectural CWEs. Results: We use static analysis to detect design level CWEs, calculate their CWSS scores, and provide a relative ranking of weaknesses that help practitioners identify the highest risks in an organization with a potential to impact TD. Conclusion: CWSS is a community agreed upon method that should be leveraged to help inform the ranking of security related TD items.

The evolution of the enterprise computing landscape towards emerging trends such as fog/edge computing and the Industrial Internet of Things (IIoT) are leading to a change of approach to securing computer networks to deal with challenges such as mobility, virtualized infrastructures, dynamic and heterogeneous user contexts and transaction-based interactions. The uncertainty introduced by such dynamicity introduces greater uncertainty into the access control process and motivates the need for risk-based access control decision making. Thus, the traditional perimeter-based security paradigm is increasingly being abandoned in favour of a so called "zero trust networking" (ZTN). In ZTN networks are partitioned into zones with different levels of trust required to access the zone resources depending on the assets protected by the zone. All accesses to sensitive information is subject to rigorous access control based on user and device profile and context. In this paper we outline a policy enforcement framework to address many of open challenges for risk-based access control for ZTN. We specify the design of required policy languages including a generic firewall policy language to express firewall rules. We design a mechanism to map these rules to specific firewall syntax and to install the rules on the firewall. We show the viability of our design with a small proof-of-concept.

Software insecurity is being identified as one of the leading causes of security breaches. In this paper, we revisited one of the strategies in solving software insecurity, which is the use of software quality metrics. We utilized a multilayer deep feedforward network in examining whether there is a combination of metrics that can predict the appearance of security-related bugs. We also applied the traditional machine learning algorithms such as decision tree, random forest, naïve bayes, and support vector machines and compared the results with that of the Deep Learning technique. The results have successfully demonstrated that it was possible to develop an effective predictive model to forecast software insecurity based on the software metrics and using Deep Learning. All the models generated have shown an accuracy of more than sixty percent with Deep Learning leading the list. This finding proved that utilizing Deep Learning methods and a combination of software metrics can be tapped to create a better forecasting model thereby aiding software developers in predicting security bugs.

Software verification has been well applied in safety critical areas and has shown the ability to provide better quality assurance for modern software. However, as lines of code and complexity of software systems increase, the scalability of verification becomes a challenge. In this paper, we present an automatic software verification framework TSV to address the scalability issues: (i) the extended structural abstraction and property-guided program slicing to solve large-scale program verification problem, saving time and memory without losing accuracy; (ii) automatically select different verification methods according to the program and property context to improve the verification efficiency. For evaluation, we compare TSV's different configurations with existing C program verifiers based on open benchmarks. We found that TSV with auto-selection performs better than with bounded model checking only or with extended structural abstraction only. Compared to existing tools such as CMBC and CPAChecker, it acquires 10%-20% improvement of accuracy and 50%-90% improvement of memory consumption.

The rapid development of mobile networks has revolutionized the way of accessing the Internet. The exponential growth of mobile subscribers, devices and various applications frequently brings about excessive traffic in mobile networks. The demand for higher data rates, lower latency and seamless handover further drive the demand for the improved mobile network design. However, traditional methods can no longer offer cost-efficient solutions for better user quality of experience with fast time-to-market. Recent work adopts SDN in LTE core networks to meet the requirement. In these software defined LTE core networks, scalability and security become important design issues that must be considered seriously. In this paper, we propose a scalable channel security scheme for the software defined LTE core network. It applies the VxLAN for scalable tunnel establishment and MACsec for security enhancement. According to our evaluation, the proposed scheme not only enhances the security of the channel communication between different network components, but also improves the flexibility and scalability of the core network with little performance penalty. Moreover, it can also shed light on the design of the next generation cellular network.

Nowadays, most vendors apply the same open source code to their products, which is dangerous. In addition, when manufacturers release patches, they generally hide the exact location of the vulnerabilities. So, identifying vulnerabilities in binaries is crucial. However, just searching source program has a lower identifying accuracy of vulnerability, which requires operators further to differentiate searched results. Under this context, we propose VMPBL to enhance identifying the accuracy of vulnerability with the help of patch files. VMPBL, compared with other proposed schemes, uses patched functions according to its vulnerable functions in patch file to further distinguish results. We establish a prototype of VMPBL, which can effectively identify vulnerable function types and get rid of safe functions from results. Firstly, we get the potential vulnerable-patched functions by binary comparison technique based on K-Trace algorithm. Then we combine the functions with vulnerability and patch knowledge database to classify these function pairs and identify the possible vulnerable functions and the vulnerability types. Finally, we test some programs containing real-world CWE vulnerabilities, and one of the experimental results about CWE415 shows that the results returned from only searching source program are about twice as much as the results from VMPBL. We can see that using VMPBL can significantly reduce the false positive rate of discovering vulnerabilities compared with analyzing source files alone.

Software Defined Network (SDN) is getting popularity both from academic and industry. Lot of researches have been made to combine SDN with future Internet paradigms to manage and control networks efficiently. SDN provides better management and control in a network through decoupling of data and control plane. Named Data Networking (NDN) is a future Internet technique with aim to replace IPv4 addressing problems. In NDN, communication between different nodes done on the basis of content names rather than IP addresses. Vehicular Ad-hoc Network (VANET) is a subtype of MANET which is also considered as a hot area for future applications. Different vehicles communicate with each other to form a network known as VANET. Communication between VANET can be done in two ways (i) Vehicle to Vehicle (V2V) (ii) Vehicle to Infrastructure (V2I). Combination of SDN and NDN techniques in future Internet can solve lot of problems which were hard to answer by considering a single technique. Security in VANET is always challenging due to unstable topology of VANET. In this paper, we merge future Internet techniques and propose a new scheme to answer timing attack problem in VANETs named as Timing Attack Prevention (TAP) protocol. Proposed scheme is evaluated through simulations which shows the superiority of proposed protocol regarding detection and mitigation of attacker vehicles as compared to normal timing attack scenario in NDN based VANET.

Aiming at the problem that there is little research on firmware vulnerability mining and the traditional method of vulnerability mining based on fuzzing test is inefficient, this paper proposed a new method of mining vulnerabilities in industrial control system firmware. Based on taint analysis technology, this method can construct test cases specifically for the variables that may trigger vulnerabilities, thus reducing the number of invalid test cases and improving the test efficiency. Experiment result shows that this method can reduce about 23 % of test cases and can effectively improve test efficiency.

Intrusion Prevention System (IPS) is a tool for securing networks from any malicious packet that could be sent from specific host. IPS can be installed on SDN network that has centralized logic architecture, so that IPS doesnt need to be installed on lots of nodes instead it has to be installed alongside the controller as center of logic network. IPS still has a flaw and that is the block duration would remain the same no matter how often a specific host attacks. For this reason, writer would like to make a system that not only integrates IPS on the SDN, but also designs an adaptive IPS by utilizing a fuzzy logic that can decide how long blocks are based on the frequency variable and type of attacks. From the results of tests that have been done, SDN network that has been equipped with adaptive IPS has the ability to detect attacks and can block the attacker host with the duration based on the frequency and type of attacks. The final result obtained is to make the SDN network safer by adding 0.228 milliseconds as the execute time required for the fuzzy algorithm in one process.

The Blockchain is an emerging paradigm that could solve security and trust issues for Internet of Things (IoT) platforms. We recently introduced in an IETF draft (“Blockchain Transaction Protocol for Constraint Nodes”) the BIoT paradigm, whose main idea is to insert sensor data in blockchain transactions. Because objects are not logically connected to blockchain platforms, controller entities forward all information needed for transaction forgery. Never less in order to generate cryptographic signatures, object needs some trusted computing resources. In previous papers we proposed the Four-Quater Architecture integrating general purpose unit (GPU), radio SoC, sensors/actuators and secure elements including TLS/DTLS stacks. These secure microcontrollers also manage crypto libraries required for blockchain operation. The BIoT concept has four main benefits: publication/duplication of sensors data in public and distributed ledgers, time stamping by the blockchain infrastructure, data authentication, and non repudiation.

The interconnection of networks between several techno-socio-economic sectors such as energy, transport, and communication, questions the manageability and resilience of the digital society. System interdependencies alter the fundamental dynamics that govern isolated systems, which can unexpectedly trigger catastrophic instabilities such as cascading failures. This paper envisions a general-purpose, yet simple prototyping of self-management software systems that can turn system interdependencies from a cause of instability to an opportunity for higher resilience. Such prototyping proves to be challenging given the highly interdisciplinary scope of interdependent networks. Different system dynamics and organizational constraints such as the distributed nature of interdependent networks or the autonomy and authority of system operators over their controlled infrastructure perplex the design for a general prototyping approach, which earlier work has not yet addressed. This paper contributes such a modular design solution implemented as an open source software extension of SFINA, the Simulation Framework for Intelligent Network Adaptations. The applicability of the software artifact is demonstrated with the introduction of a novel self-healing mechanism for interdependent power networks, which optimizes power flow exchanges between a damaged and a healer network to mitigate power cascading failures. Results show a significant decrease in the damage spread by self-healing synergies, while the degree of interconnectivity between the power networks indicates a tradeoff between links survivability and load served. The contributions of this paper aspire to bring closer several research communities working on modeling and simulation of different domains with an economic and societal impact on the resilience of real-world interdependent networks.

Cyber-physical systems (CPS) and their Internet of Things (IoT) components are repeatedly subject to various attacks targeting weaknesses in their firmware. For that reason emerges an imminent demand for secure update mechanisms that not only include specific systems but cover all parts of the critical infrastructure. In this paper we introduce a theoretical concept for a secure CPS device update and verification mechanism and provide information on handling hardware-based security incorporating trusted platform modules (TPM) on those CPS devices. We will describe secure communication channels by state of the art technology and also integrity measurement mechanisms to ensure the system is in a known state. In addition, a multi-level fail-over concept is presented, ensuring continuous patching to minimize the necessity of restarting those systems.

Cyber physical systems are the key innovation driver for many domains such as automotive, avionics, industrial process control, and factory automation. However, their interconnection potentially provides adversaries easy access to sensitive data, code, and configurations. If attackers gain control, material damage or even harm to people must be expected. To counteract data theft, system manipulation and cyber-attacks, security mechanisms must be embedded in the cyber physical system. Adding hardware security in the form of the standardized Trusted Platform Module (TPM) is a promising approach. At the same time, traditional dependability features such as safety, availability, and reliability have to be maintained. To determine the right balance between security and dependability it is essential to understand their interferences. This paper supports developers in identifying the implications of using TPMs on the dependability of their system.We highlight potential consequences of adding TPMs to cyber-physical systems by considering the resulting safety, reliability, and availability. Furthermore, we discuss the potential of enhancing the dependability of TPM services by applying traditional redundancy techniques.

The fifth generation of cellular networks (5G) will enable different use cases where security will be more critical than ever before (e.g. autonomous vehicles and critical IoT devices). Unfortunately, the new networks are being built on the certainty that security problems cannot be solved in the short term. Far from reinventing the wheel, one of our goals is to allow security software developers to implement and test their reactive solutions for the capillary network of 5G devices. Therefore, in this paper a solution for analysing proximity-based attacks in 5G environments is modelled and tested using OMNET++. The solution, named CRAT, is able to decouple the security analysis from the hardware of the device with the aim to extend the analysis of proximity-based attacks to different use-cases in 5G. We follow a high-level approach, in which the devices can take the role of victim, offender and guardian following the principles of the routine activity theory.

Cloud computing is the major paradigm in today's IT world with the capabilities of security management, high performance, flexibility, scalability. Customers valuing these features can better benefit if they use a cloud environment built using HPC fabric architecture. However, security is still a major concern, not only on the software side but also on the hardware side. There are multiple studies showing that the malicious users can affect the regular customers through the hardware if they are co-located on the same physical system. Therefore, solving possible security concerns on the HPC fabric architecture will clearly make the fabric industries leader in this area. In this paper, we propose an autonomic HPC fabric architecture that leverages both resilient computing capabilities and adaptive anomaly analysis for further security.

Role-Based Access Control (RBAC) is often used in web applications to restrict operations and protect security sensitive information and resources. Web applications regularly undergo maintenance and evolution and their security may be affected by source code changes between releases. To prevent security regression and vulnerabilities, developers have to take re-validation actions before deploying new releases. This may become a significant undertaking, especially when quick and repeated releases are sought. We define protection-impacting changes as those changed statements during evolution that alter privilege protection of some code. We propose an automated method that identifies protection-impacting changes within all changed statements between two versions. The proposed approach compares statically computed security protection models and repository information corresponding to different releases of a system to identify protection-impacting changes. Results of experiments present the occurrence of protection-impacting changes over 210 release pairs of WordPress, a PHP content management web application. First, we show that only 41% of the release pairs present protection-impacting changes. Second, for these affected release pairs, protection-impacting changes can be identified and represent a median of 47.00 lines of code, that is 27.41% of the total changed lines of code. Over all investigated releases in WordPress, protection-impacting changes amounted to 10.89% of changed lines of code. Conversely, an average of about 89% of changed source code have no impact on RBAC security and thus need no re-validation nor investigation. The proposed method reduces the amount of candidate causes of protection changes that developers need to investigate. This information could help developers re-validate application security, identify causes of negative security changes, and perform repairs in a more effective way.