Biblio

Distributed mesh sensor networks provide cost-effective communications for deployment in various smart grid domains, such as home area networks (HAN), neighborhood area networks (NAN), and substation/plant-generation local area networks. This paper introduces a dynamically updating key distribution strategy to enhance mesh network security against cyber attack. The scheme has been applied to two security protocols known as simultaneous authentication of equals (SAE) and efficient mesh security association (EMSA). Since both protocols utilize 4-way handshaking, we propose a Merkle-tree based handshaking scheme, which is capable of improving the resiliency of the network in a situation where an intruder carries a denial of service attack. Finally, by developing a denial of service attack model, we can then evaluate the security of the proposed schemes against cyber attack, as well as network performance in terms of delay and overhead.

This paper presents the relative merits of IR and microwave sensor technology and their combination with wireless camera for the development of a wall mounted wireless intrusion detection system and explain the phases by which the intrusion information are collected and sent to the central control station using wireless mesh network for analysis and processing the collected data. These days every protected zone is facing numerous security threats like trespassing or damaging of important equipments and a lot more. Unwanted intrusion has turned out to be a growing problem which has paved the way for a newer technology which detects intrusion accurately. Almost all organizations have their own conventional arrangement of protecting their zones by constructing high wall, wire fencing, power fencing or employing guard for manual observation. In case of large areas, manually observing the perimeter is not a viable option. To solve this type of problem we have developed a wall-mounted wireless fencing system. In this project I took the responsibility of studying how the different units could be collaborated and how the data collected from them could be further processed with the help of software, which was developed by me. The Intrusion detection system constitutes an important field of application for IR and microwave based wireless sensor network. A state of the art wall-mounted wireless intrusion detection system will detect intrusion automatically, through multi-level detection mechanism (IR, microwave, active RFID & camera) and will generate multi-level alert (buzzer, images, segment illumination, SMS, E-Mail) to notify security officers, owners and also illuminate the particular segment where the intrusion has happened. This system will enable the authority to quickly handle the emergency through identification of the area of incident at once and to take action quickly. IR based perimeter protection is a proven technology. However IR-based intrusion detection system is not a full-proof solution since (1) IR may fail in foggy or dusty weather condition & hence it may generate false alarm. Therefore we amalgamate this technology with Microwave based intrusion detection which can work satisfactorily in foggy weather. Also another significant arena of our proposed system is the Camera-based intrusion detection. Some industries require this feature to capture the snap-shots of the affected location instantly as the intrusion happens. The Intrusion information data are transmitted wirelessly to the control station via multi hop routing (using active RFID or IEEE 802.15.4 protocol). The Control station will receive intrusion information at real time and analyze the data with the help of the Intrusion software. It then sends SMS to the predefined numbers of the respective authority through GSM modem attached with the control station engine.

In order to conserve wireless sensor network (WSN) lifetime, data aggregation is applied. Some researchers consider the importance of security and propose secure data aggregation protocols. The essential of those secure approaches is to make sure that the aggregators aggregate the data in appropriate and secure way. In this paper we give the description of ESPDA (Energy-efficient and Secure Pattern-based Data Aggregation) and SRDA (Secure Reference-Based Data Aggregation) protocol that work on cluster-based WSN and the deep security analysis that are different from the previously presented one.

While many theoretical and simulation works have highlighted the potential gains of cognitive radio, several technical issues still need to be evaluated from an experimental point of view. Deploying complex heterogeneous system scenarios is tedious, time consuming and hardly reproducible. To address this problem, we have developed a new experimental facility, called CorteXlab, that allows complex multi-node cognitive radio scenarios to be easily deployed and tested by anyone in the world. Our objective is not to design new software defined radio (SDR) nodes, but rather to provide a comprehensive access to a large set of high performance SDR nodes. The CorteXlab facility offers a 167 m2 electromagnetically (EM) shielded room and integrates a set of 24 universal software radio peripherals (USRPs) from National Instruments, 18 PicoSDR nodes from Nutaq and 42 IoT-Lab wireless sensor nodes from Hikob. CorteXlab is built upon the foundations of the SensLAB testbed and is based the free and open-source toolkit GNU Radio. Automation in scenario deployment, experiment start, stop and results collection is performed by an experiment controller, called Minus. CorteXlab is in its final stages of development and is already capable of running test scenarios. In this contribution, we show that CorteXlab is able to easily cope with the usual issues faced by other testbeds providing a reproducible experiment environment for CR experimentation.
 

Wireless sensor networks (WSNs) are prone to propagating malware because of special characteristics of sensor nodes. Considering the fact that sensor nodes periodically enter sleep mode to save energy, we develop traditional epidemic theory and construct a malware propagation model consisting of seven states. We formulate differential equations to represent the dynamics between states. We view the decision-making problem between system and malware as an optimal control problem; therefore, we formulate a malware-defense differential game in which the system can dynamically choose its strategies to minimize the overall cost whereas the malware intelligently varies its strategies over time to maximize this cost. We prove the existence of the saddle-point in the game. Further, we attain optimal dynamic strategies for the system and malware, which are bang-bang controls that can be conveniently operated and are suitable for sensor nodes. Experiments identify factors that influence the propagation of malware. We also determine that optimal dynamic strategies can reduce the overall cost to a certain extent and can suppress the malware propagation. These results support a theoretical foundation to limit malware in WSNs.

In this paper we address the problem of designing a fault tolerant control scheme for an HVAC control system where sensing and actuation data are exchanged with a centralized controller via a wireless sensors and actuators network where the communication nodes are subject to permanent failures and malicious intrusions.

A Wireless sensor network is a special type of Ad Hoc network, composed of a large number of sensor nodes spread over a wide geographical area. Each sensor node has the wireless communication capability and sufficient intelligence for making signal processing and dissemination of data from the collecting center .In this paper deals about redundancy management for improving network efficiency and query reliability in heterogeneous wireless sensor networks. The proposed scheme deals about finding a reliable path by using redundancy management algorithm and detection of unreliable nodes by discarding the path. The redundancy management algorithm finds the reliable path based on redundancy level, average distance between a source node and destination node and analyzes the redundancy level as the path and source redundancy. For finding the path from source CH to processing center we propose intrusion tolerance in the presence of unreliable nodes. Finally we applied our analyzed result to redundancy management algorithm to find the reliable path in which the network efficiency and Query success probability will be improved.

Wireless sensor networks extend people's ability to explore, monitor, and control the physical world. Wireless sensor networks are susceptible to certain types of attacks because they are deployed in open and unprotected environments. Novel intrusion tolerance architecture is proposed in this paper. An expert intrusion detection analysis system and an all-channel analyzer are introduced. A proposed intrusion tolerance scheme is implemented. Results show that this scheme can detect data traffic and re-route it to a redundant node in the wireless network, prolong the lifetime of the network, and isolate malicious traffic introduced through compromised nodes or illegal intrusions.

There is an increasing need for wireless sensor networks (WSNs) to be more tightly integrated with the Internet. Several real world deployment of stand-alone wireless sensor networks exists. A number of solutions have been proposed to address the security threats in these WSNs. However, integrating WSNs with the Internet in such a way as to ensure a secure End-to-End (E2E) communication path between IPv6 enabled sensor networks and the Internet remains an open research issue. In this paper, the 6LoWPAN adaptation layer was extended to support both IPsec's Authentication Header (AH) and Encapsulation Security Payload (ESP). Thus, the communication endpoints in WSNs are able to communicate securely using encryption and authentication. The proposed AH and ESP compressed headers performance are evaluated via test-bed implementation in 6LoWPAN for IPv6 communications on IEEE 802.15.4 networks. The results confirm the possibility of implementing E2E security in IPv6 enabled WSNs to create a smooth transition between WSNs and the Internet. This can potentially play a big role in the emerging "Internet of Things" paradigm.

Distributed wireless sensor network technologies have become one of the major research areas in healthcare industries due to rapid maturity in improving the quality of life. Medical Wireless Sensor Network (MWSN) via continuous monitoring of vital health parameters over a long period of time can enable physicians to make more accurate diagnosis and provide better treatment. The MWSNs provide the options for flexibilities and cost saving to patients and healthcare industries. Medical data sensors on patients produce an increasingly large volume of increasingly diverse real-time data. The transmission of this data through hospital wireless networks becomes a crucial problem, because the health information of an individual is highly sensitive. It must be kept private and secure. In this paper, we propose a security model to protect the transfer of medical data in hospitals using MWSNs. We propose Compressed Sensing + Encryption as a strategy to achieve low-energy secure data transmission in sensor networks.

Although wireless communication is integral to our daily lives, there are numerous crucial questions related to coverage, energy consumption, reliability, and security when it comes to industrial deployment. The authors provide an overview of wireless machine-to-machine (M2M) technologies in the context of a smart factory.

Wireless sensor and actuator networks (WSAN) constitute an emerging technology with multiple applications in many different fields. Due to the features of WSAN (dynamism, redundancy, fault tolerance, and self-organization), this technology can be used as a supporting technology for the monitoring of critical infrastructures (CIs). For decades, the monitoring of CIs has centered on supervisory control and data acquisition (SCADA) systems, where operators can monitor and control the behavior of the system. The reach of the SCADA system has been hampered by the lack of deployment flexibility of the sensors that feed it with monitoring data. The integration of a multihop WSAN with SCADA for CI monitoring constitutes a novel approach to extend the SCADA reach in a cost-effective way, eliminating this handicap. However, the integration of WSAN and SCADA presents some challenges which have to be addressed in order to comprehensively take advantage of the WSAN features. This paper presents a solution for this joint integration. The solution uses a gateway and a Web services approach together with a Web-based SCADA, which provides an integrated platform accessible from the Internet. A real scenario where this solution has been successfully applied to monitor an electrical power grid is presented.

Sybil attack poses a serious threat to geographic routing. In this attack, a malicious node attempts to broadcast incorrect location information, identity and secret key information. A Sybil node can tamper its neighboring nodes for the purpose of converting them as malicious. As the amount of Sybil nodes increase in the network, the network traffic will seriously affect and the data packets will never reach to their destinations. To address this problem, researchers have proposed several schemes to detect Sybil attacks. However, most of these schemes assume costly setup such as the use of relay nodes or use of expensive devices and expensive encryption methods to verify the location information. In this paper, the authors present a method to detect Sybil attacks using Sequential Hypothesis Testing. The proposed method has been examined using a Greedy Perimeter Stateless Routing (GPSR) protocol with analysis and simulation. The simulation results demonstrate that the proposed method is robust against detecting Sybil attacks.

Sybil attack poses a serious threat to geographic routing. In this attack, a malicious node attempts to broadcast incorrect location information, identity and secret key information. A Sybil node can tamper its neighboring nodes for the purpose of converting them as malicious. As the amount of Sybil nodes increase in the network, the network traffic will seriously affect and the data packets will never reach to their destinations. To address this problem, researchers have proposed several schemes to detect Sybil attacks. However, most of these schemes assume costly setup such as the use of relay nodes or use of expensive devices and expensive encryption methods to verify the location information. In this paper, the authors present a method to detect Sybil attacks using Sequential Hypothesis Testing. The proposed method has been examined using a Greedy Perimeter Stateless Routing (GPSR) protocol with analysis and simulation. The simulation results demonstrate that the proposed method is robust against detecting Sybil attacks.

Nowadays, our surrounding environment is more and more scattered with various types of sensors. Due to their intrinsic properties and representation formats, they form small islands isolated from each other. In order to increase interoperability and release their full capabilities, we propose to represent devices descriptions including data and service invocation with a common model allowing to compose mashups of heterogeneous sensors. Pushing this paradigm further, we also propose to augment service descriptions with a discovery protocol easing automatic assimilation of knowledge. In this work, we describe the architecture supporting what can be called a Semantic Sensor Web-of-Things. As proof of concept, we apply our proposal to the domain of smart buildings, composing a novel ontology covering heterogeneous sensing, actuation and service invocation. Our architecture also emphasizes on the energetic aspect and is optimized for constrained environments.

We investigate the coverage efficiency of a sensor network consisting of sensors with circular sensing footprints of different radii. The objective is to completely cover a region in an efficient manner through a controlled (or deterministic) deployment of such sensors. In particular, it is shown that when sensing nodes of two different radii are used for complete coverage, the coverage density is increased, and the sensing cost is significantly reduced as compared to the homogeneous case, in which all nodes have the same sensing radius. Configurations of heterogeneous disks of multiple radii to achieve efficient circle coverings are presented and analyzed.