Biblio

This paper is the first to investigate the long-term stability of Surface Acoustic Wave Gyroscopes (SAWG) using an ovenized control system. Monolithic integration of a MEMS heater adjacent to SAW devices on Lithium Niobate over insulator substrate (LNOI) tightly couples frequency-based temperature detection with heating for temperature and frequency stabilization. This first prototype demonstrates the ability to minimize the temperature variations of the SAWG to below ±10 μK and stabilize the SAWG resonance frequency to ±0.2 ppm. This approach thus eliminates the thermal drift in a SAWG and enables the development of a new generation of MEMS-based gyroscopes with long-term stability.

Wireless sensor network (WSN) is a wireless self-organizing multi-hop network that can sense and collect the information of the monitored environment through a certain number of sensor nodes which deployed in a certain area and transmit the collected information to the client. Due to the limited power and data capacity stored by the micro sensor, it is weak in communication with other nodes, data storage and calculation, and is very vulnerable to attack and harm to the entire network. The Sybil attack is a classic example. Sybil attack refers to the attack in which malicious nodes forge multiple node identities to participate in network operation. Malicious attackers can forge multiple node identities to participate in data forwarding. So that the data obtained by the end user without any use value. In this paper, we propose a three-tier detection scheme for the Sybil node in the severe environment. Every sensor node will determine whether they are Sybil nodes through the first-level and second-level high-energy node detection. Finally, the base station determines whether the Sybil node detected by the first two stages is true Sybil node. The simulation results show that our proposed scheme significantly improves network lifetime, and effectively improves the accuracy of Sybil node detection.

Back-end-of-line compatible integration of NdFeB-based micro magnets onto 8 inch Si substrates is presented. Substrate conditioning procedures to enable further processing in a cleanroom environment are discussed. It is shown that permanent magnetic structures with lateral dimensions between 25μm and 2000μm and a depth up to 500μm can be fabricated reliably and reproducibly with a remanent magnetization of 340mT at a standard deviation as low as 5% over the substrate. To illustrate post-processing capabilities, the fabrication of micro magnet arrangements embedded in silicon frames is described.

This paper reported the polymer coated film bulk acoustic resonators (FBAR) as a sensitive detector in micro chromatography for the detection of trace chemical warfare agents (CWA) simulants. The FBAR sensor was enclosed in a microfluidic channel and then coupled with microfabricated separation column. The subsequent chromatographic analysis successfully demonstrated the detection of parts per billion (ppb) concentrations of chemical warfare agents (CWAs) simulants in a five components gas mixture. This work represented an important step toward the realization of FBAR based handheld micro chromatography for CWA detection in the field.

The article describes design and realization of security system based on single-chip microcontrollers. System includes sensor modules for unauthorized entrance detection based on magnetic contact, measuring carbon monoxide level, movement detection and measuring temperature and humidity. System also includes control unit, control panel and development board Arduino with ethernet interface connected for web server implementation.