Biblio

The design of efficient and secure cryptographic algorithms is a fundamental problem of cryptography. Due to the tight cost and constrained resources devices such as Radio-Frequency IDentification (RFID), wireless sensors, smart cards, health-care devices, lightweight cryptography has received a great deal of attention. Recent research mainly focused on designing optimized cryptographic algorithms which trade offs between security performance, time consuming, energy consumption and cost. In this paper, we present two chaotic stream ciphers based on chaos and we report the results of a comparative performance evaluation study. Compared to other crypto-systems of the literature, we demonstrate that our designed stream ciphers are suitable for practical secure applications of the Internet of Things (IoT) in a constrained resource environment.

A secure hash code or message authentication code is a one-way hash algorithm. It is producing a fixed-size hash function to be used to check verification, the integrity of electronic data, password storage. Numerous researchers have proposed hashing algorithms. They have a very high time complexity based on several steps, initial value, and key constants which are publically known. We are focusing here on the many exiting algorithms that are dependent on the initial value and key constant usage to increasing the security strength of the hash function which is publically known. Therefore, we are proposing autonomous initial value proposed secure hash algorithm (AIVPSHA64) in this research paper to produce sixty-four-bit secure hash code without the need of initial value and key constant, it is very useful for a smart card to verify their identity which has limited memory space. Then evaluate the performance of hash function using autonomous initial value proposed secure hash algorithm (AIVPSHA64) and will compare the result, which is found by python-3.9.0 programming language.

Cryptography is the science of encryption and decryption of data using the techniques of mathematics to achieve secure communication. This enables the user to send the data in an insecure channel. These channels are usually vulnerable to security attacks due to the data that they possess. A lot of work is being done these days to protect data and data communication. Hence securing them is the utmost concern. In recent times a lot of researchers have come up with different cryptographic techniques to protect the data over the network. One such technique used is DNA cryptography. The proposed approach employs a DNA sequencing-based encoding and decoding mechanism. The data is secured over the network using a secure authentication and key agreement procedure. A significant amount of work is done to show how DNA cryptography is secure when compared to other forms of cryptography techniques over the network.

Usually on the top of Smart Chip covered with active shielding layer to prevent invasive physical exploration tampering attacks on part of the chip's function modules, to obtain the chip's critical storage data and sensitive information. This paper introduces a design based on UMC55 technology, and applied to the safety chip active shielding layer method for layout design, the layout design from the two aspects of the metal shielding line and shielding layer detecting circuit, using the minimum size advantage and layout design process when the depth of hidden shielding line interface and port order connection method and greatly increased the difficulty of physical attack. The layout design can withstand most of the current FIB physical attack technology, and has been applied to the actual smart card design, and it has important practical significance for the security design and attack of the chip.

The extensive use of the internet and web-based applications spot the multiserver authentication as a significant component. The users can get their services after authenticating with the service provider by using similar registration records. Various protocol schemes are developed for multiserver authentication, but the existing schemes are not secure and often lead towards various vulnerabilities and different security issues. Recently, Zhao et al. put forward a proposal for smart card and user's password-based authentication protocol for the multiserver environment and showed that their proposed protocol is efficient and secure against various security attacks. This paper points out that Zhao et al.'s authentication scheme is susceptive to traceability as well as anonymity attacks. Thus, it is not feasible for the multiserver environment. Furthermore, in their scheme, it is observed that a user while authenticating does not send any information with any mention of specific server identity. Therefore, this paper proposes an enhanced, efficient and secure user authentication scheme for use in any multiserver environment. The formal security analysis and verification of the protocol is performed using state-of-the-art tool “ProVerif” yielding that the proposed scheme provides higher levels of security.

Nowadays, Vehicular Ad hoc Networks (VANETs) are popularly known as they can reduce traffic and road accidents. These networks need several security requirements, such as anonymity, data authentication, confidentiality, traceability and cancellation of offending users, unlinkability, integrity, undeniability and access control. Authentication of the data and sender are most important security requirements in these networks. So many authentication schemes have been proposed up to now. One of the well-known techniques to provide users authentication in these networks is the authentication based on the smartcard (ASC). In this paper, we propose an ASC scheme that not only provides necessary security requirements such as anonymity, traceability and unlinkability in the VANETs but also is more efficient than the other schemes in the literatures.

Authenticating a person's identity has always been a challenge. While attempts are being made by government agencies to address this challenge, the citizens are being exposed to a new age problem of Identity management. The sharing of photocopies of identity cards in order to prove our identity is a common sight. From score-card to Aadhar-card, the details of our identity has reached many unauthorized hands during the years. In India the identity thefts accounts for 77% [1] of the fraud cases, and the threats are trending. Programs like e-Residency by Estonia[2], Bitnation using Ethereum[3] are being devised for an efficient Identity Management. Even the US Home Land Security is funding a research with an objective of “Design information security and privacy concepts on the Blockchain to support identity management capabilities that increase security and productivity while decreasing costs and security risks for the Homeland Security Enterprise (HSE).” [4] This paper will discuss the challenges specific to India around Identity Management, and the possible solution that the Distributed ledger, hashing algorithms and smart contracts can offer. The logic of hashing the personal data, and controlling the distribution of identity using public-private keys with Blockchain technology will be discussed in this paper.

E- Health systems, specifically, Telecare Medical Information Systems (TMIS), are deployed in order to provide patients with specific diseases with healthcare services that are usually based on remote monitoring. Therefore, making an efficient, convenient and secure connection between users and medical servers over insecure channels within medical services is a rather major issue. In this context, because of the biometrics' characteristics, many biometrics-based three factor user authentication schemes have been proposed in the literature to secure user/server communication within medical services. In this paper, we make a brief study of the most interesting proposals. Then, we propose a new three-factor authentication and key agreement scheme for TMIS. Our scheme tends not only to fix the security drawbacks of some studied related work, but also, offers additional significant features while minimizing resource consumption. In addition, we perform a formal verification using the widely accepted formal security verification tool AVISPA to demonstrate that our proposed scheme is secure. Also, our comparative performance analysis reveals that our proposed scheme provides a lower resource consumption compared to other related work's proposals.

The JavaCard multi-application platform is now deployed to over twenty billion smartcards, used in various applications ranging from banking payments and authentication tokens to SIM cards and electronic documents. In most of those use cases, access to various cryptographic primitives is required. The standard JavaCard API provides a basic level of access to such functionality (e.g., RSA encryption) but does not expose low-level cryptographic primitives (e.g., elliptic curve operations) and essential data types (e.g., Integers). Developers can access such features only through proprietary, manufacturer-specific APIs. Unfortunately, such APIs significantly reduce the interoperability and certification transparency of the software produced as they require non-disclosure agreements (NDA) that prohibit public sharing of the applet's source code.We introduce JCMathLib, an open library that provides an intermediate layer realizing essential data types and low-level cryptographic primitives from high-level operations. To achieve this, we introduce a series of optimization techniques for resource-constrained platforms that make optimal use of the underlying hardware, while having a small memory footprint. To the best of our knowledge, it is the first generic library for low-level cryptographic operations in JavaCards that does not rely on a proprietary API.Without any disclosure limitations, JCMathLib has the potential to increase transparency by enabling open code sharing, release of research prototypes, and public code audits. Moreover, JCMathLib can help resolve the conflict between strict open-source licenses such as GPL and proprietary APIs available only under an NDA. This is of particular importance due to the introduction of JavaCard API v3.1, which targets specifically IoT devices, where open-source development might be more common than in the relatively closed world of government-issued electronic documents.

The internet of things (IoT) is consisting of many complementary elements which have their own specificities and capacities. These elements are gaining new application and use cases in our lives. Nevertheless, they open a negative horizon of security and privacy issues which must be treated delicately before the deployment of any IoT. Recently, different works emerged dealing with the same branch of issues, like the work of Yuwen Chen et al. that is called LightPriAuth. LightPriAuth has several drawbacks and weakness against various popular attacks such as Insider attack and stolen smart card. Our objective in this paper is to propose a novel solution which is “authentication scheme with three factor using ECC and fuzzy extractor” to ensure security and privacy. The obtained results had proven the superiority of our scheme's performances compared to that of LightPriAuth which, additionally, had defeated the weaknesses left by LightPriAuth.

This Innovate Practice Work in Progress paper is about education on Cybersecurity, which is essential in training of innovative talents in the era of the Internet. Besides knowledge and skills, it is important as well to enhance the students' awareness of cybersecurity in daily life. Considering that contactless smart cards are common and widely used in various areas, one basic and two advanced contactless smart card experiments were designed innovatively and assigned to junior students in 3-people groups in an introductory cybersecurity summer course. The experimental principles, facilities, contents and arrangement are introduced successively. Classroom tests were managed before and after the experiments, and a box and whisker plot is used to describe the distributions of the scores in both tests. The experimental output and student feedback implied the learning objectives were achieved through the problem-based, active and group learning experience during the experiments.

Management of flow of all kinds of objects including human beings signifies their real time monitoring. This paper outlines the advantages accrued out of biometrics integration with Smartcards. It showcases the identity authentication employed through different biometric techniques. Biometric key considerations influencing the essence of this technology in Smartcards have been discussed briefly in this paper. With better accuracy and highly reliable support system this technology finds itself today in widespread deployment. However, there are still some concerns with human interfaces along with important factors in implementations of biometrics with smartcards which have been highlighted in this article. This paper also examines the privacy concerns of users in addressing their apprehensions to protect their confidentiality through biometric encryption and proposes DNA technology as a best possible biometric solution. However, due to inherent limitations of its processing time and an instant requirement of authentication, it has been suggested in the proposed modal to use it with combination of one or more suitable biometric technologies. An instant access has been proposed to the user with limited rights by using biometric technology other than the DNA as a primary source of authentication. DNA has been proposed as secondary source of authentication where only after due sample comparison full access rights to the user will be granted. This paper also aims in highlighting the number of advantages offered by the integration of biometrics with smartcards. It also discusses the need to tackle existing challenges due to restrictions in processing of different biometric technologies by defining certain specific future scopes for improvements in existing biometric technologies mainly against the time taken by it for sample comparisons.

In order to develop a `common session secret key' though the insecure channel, cryptographic Key Agreement Protocol plays a major role. Many researchers' cryptographic protocol uses smart card as a medium to store transaction secret values. The tampered resistance property of smart card is unable to defend the secret values from side channel attacks. It means a lost smart card is an easy target for any attacker. Though password authentication helps the protocol to give secrecy but on-line as well as off-line password guessing attack can make the protocol vulnerable. The concerned paper manifested key agreement protocol based on three party authenticated key agreement protocol to defend all password related attacks. The security analysis of our paper has proven that the accurate guess of the password of a legitimate user will not help the adversary to generate a common session key.

Emergence of Information and Communication Technology (ICT) has facilitated its users to access electronic services through open channel like Internet. This approach of digital communication has its specific security lapses, which should be addressed properly to ensure Privacy, Integrity, Non-repudiation and Authentication (PINA) of information. During message communication, intruders may mount infringement attempts to compromise the communication. The situation becomes critical, if an user is identified by multiple identification numbers, as in that case, intruder have a wide window open to use any of its identification number to fulfill its ill intentions. To resolve this issue, author have proposed a single window based cloud service delivery model, where a smart card serves as a single interface to access multifaceted electronic services like banking, healthcare, employment, etc. To detect and prevent unauthorized access, in this paper, authors have focused on the intrusion detection system of the cloud service model during cloud banking transaction.

With the development of internet of things (IoT) and communication technology, the sensors and embedded devices collect a large amount of data and handle it. However, IoT environment cannot efficiently treat the big data and is vulnerable to various attacks because IoT is comprised of resource limited devices and provides a service through a open channel. In 2018, Sharma and Kalra proposed a lightweight multi-factor authentication protocol for cloud-IoT environment to overcome this problems. We demonstrate that Sharma and Kalra's scheme is vulnerable to identity and password guessing, replay and session key disclosure attacks. We also propose a secure multifactor authentication protocol to resolve the security problems of Sharma and Kalra's scheme, and then we analyze the security using informal analysis and compare the performance with Sharma and Kalra's scheme. The proposed scheme can be applied to real cloud-IoT environment securely.

People use their personal computers, laptops, tablets and smart phones to digitally sign documents in company's websites and other online electronic applications, and one of the main cybersecurity challenges in this process is trusted digital signature. While the majority of systems use password-based authentication to secure electronic signature, some more critical systems use USB token and smart card to prevent identity theft and implement the trusted digital signing process. Even though smart card provides stronger security, any weakness in the terminal itself can compromise the security of smart card. In this paper, we investigate current smart card digital signature, and illustrate well-known basic vulnerabilities of smart card terminal with the real implementation of two possible attacks including PIN sniffing and message alteration just before signing. As we focus on second attack in this paper, we propose a novel mechanism using time-based digital signing by smart card to defend against message alteration attack. Our prototype implementation and performance analysis illustrate that our proposed mechanism is feasible and provides stronger security. Our method uses popular timestamping protocol packets and does not require any new key distribution and certificate issuance.

The paper deals with the implementation aspects of the bilinear pairing operation over an elliptic curve on constrained devices, such as smart cards, embedded devices, smart meters and similar devices. Although cryptographic constructions, such as group signatures, anonymous credentials or identity-based encryption schemes, often rely on the pairing operation, the implementation of such schemes into practical applications is not straightforward, in fact, it may become very difficult. In this paper, we show that the implementation is difficult not only due to the high computational complexity, but also due to the lack of cryptographic libraries and programming interfaces. In particular, we show how difficult it is to implement pairing-based schemes on constrained devices and show the performance of various libraries on different platforms. Furthermore, we show the performance estimates of fundamental cryptographic constructions, the group signatures. The purpose of this paper is to reduce the gap between the cryptographic designers and developers and give performance results that can be used for the estimation of the implementability and performance of novel, upcoming schemes.

In this paper, the literature survey of different algorithms for generating encryption keys using fingerprints is presented. The focus is on fingerprint features called minutiae points where fingerprint ridges end or bifurcate. Minutiae points require less memory and are processed faster than other fingerprint features. In addition, presented is the proposed efficient method for cryptographic key generation using finger-codes. The results show that the length of the key, computing time and the memory it requires is efficient for use as a biometric key or even as a password during verification and authentication.

Smart Grid (SG) technology has been developing for years, which facilitates users with portable access to power through being applied in numerous application scenarios, one of which is the electric vehicle charging. In order to ensure the security of the charging process, users need authenticating with the smart meter for the subsequent communication. Although there are many researches in this field, few of which have endeavored to protect the anonymity and the untraceability of users during the authentication. Further, some studies consider the problem of user anonymity, but they are non-light-weight protocols, even some can not assure any fairness in key agreement. In this paper, we first points out that existing authentication schemes for Smart Grid are neither lack of critical security nor short of important property such as untraceability, then we propose a new two-factor lightweight user authentication scheme based on password and biometric. The authentication process of the proposed scheme includes four message exchanges among the user mobile, smart meter and the cloud server, and then a security one-time session key is generated for the followed communication process. Moreover, the scheme has some new features, such as the protection of the user's anonymity and untraceability. Security analysis shows that our proposed scheme can resist various well-known attacks and the performance analysis shows that compared to other three schemes, our scheme is more lightweight, secure and efficient.

In the distributed Internet of Things (IoT) architecture, sensors collect data from vehicles, home appliances and office equipment and other environments. Various objects contain the sensor which process data, cooperate and exchange information with other embedded devices and end users in a distributed network. It is important to provide end-to-end communication security and an authentication system to guarantee the security and reliability of the data in such a distributed system. Two-factor authentication is a solution to improve the security level of password-based authentication processes and immunized the system against many attacks. At the same time, the computational and storage overhead of an authentication method also needs to be considered in IoT scenarios. For this reason, many cryptographic schemes are designed especially for the IoT; however, we observe a lack of laboratory hardware test beds and modules, and universal authentication hardware modules. This paper proposes a design and analysis for a hardware module in the IoT which allows the use of two-factor authentication based on smart cards, while taking into consideration the limited processing power and energy reserves of nodes, as well as designing the system with scalability in mind.

This paper introduces a newly developed Object-Oriented Open Software Architecture designed for supporting security applications, while leveraging on the capabilities offered by dedicated Open Hardware devices. Specifically, we target the SEcube™ platform, an Open Hardware security platform based on a 3D SiP (System on Package) designed and produced by Blu5 Group. The platform integrates three components employed for security in a single package: a Cortex-M4 CPU, a FPGA and an EAL5+ certified Smart Card. The Open Software Architecture targets both the host machine and the security device, together with the secure communication among them. To maximize its usability, this architecture is organized in several abstraction layers, ranging from hardware interfaces to device drivers, from security APIs to advanced applications, like secure messaging and data protection. We aim at releasing a multi-platform Open Source security framework, where software and hardware cooperate to hide to both the developer and the final users classical security concepts like cryptographic algorithms and keys, focusing, instead, on common operational security concepts like groups and policies.

Internet of Things (IoT) is an emerging trend that is changing the way devices connect and communicate. Integration of cloud computing with IoT i.e. Cloud of Things (CoT) provide scalability, virtualized control and access to the services provided by IoT. Security issues are a major obstacle in widespread deployment and application of CoT. Among these issues, authentication and identification of user is crucial. In this study paper, survey of various authentication schemes is carried out. The aim of this paper is to study a multifactor authentication system which uses secret splitting in detail. The system uses exclusive-or operations, encryption algorithms and Diffie-Hellman key exchange algorithm to share key over the network. Security analysis shows the resistance of the system against different types of attacks.

Smart Card has complications with validation and transmission process. Therefore, by using peeping attack, the secret code was stolen and secret filming while entering Personal Identification Number at the ATM machine. We intend to develop an authentication system to banks that protects the asset of user's. The data of a user is to be ensured that secure and isolated from the data leakage and other attacks Therefore, we propose a system, where ATM machine will have a QR code in which the information's are encrypted corresponding to the ATM machine and a mobile application in the customer's mobile which will decrypt the encoded QR information and sends the information to the server and user's details are displayed in the ATM machine and transaction can be done. Now, the user securely enters information to transfer money without risk of peeping attack in Automated Teller Machine by just scanning the QR code at the ATM by mobile application. Here, both the encryption and decryption technique are carried out by using Triple DES Algorithm (Data Encryption Standard).

In today's growing concern for home security, we have developed an advanced security system using integrated digital signature and DNA cryptography. The digital signature is formed using multi-feature biometric traits which includes both fingerprint as well as iris image. We further increase the security by using DNA cryptography which is embedded on a smart card. In order to prevent unauthorized access manually or digitally, we use geo-detection which compares the unregistered devices location with the user's location using any of their personal devices such as smart phone or tab.

Data sharing is a significant functionality in cloud storage. These cloud storage provider are answerable for keeping the data obtainable and available in addition to the physical environment protected and running. Here we can securely, efficiently, and flexibly share data with others in cloud storage. A new public-key cryptosystems is planned which create constant-size cipher texts such that efficient allocation of decryption rights for any set of cipher texts are achievable. The uniqueness means that one can aggregate any set of secret keys and make them as packed in as a single key, but encircling the power of all the keys being aggregated. This packed in aggregate key can be easily sent to others or be stored in a smart card with very restricted secure storage. In KAC, users encrypt a file with single key, that means every file have each file, also there will be aggregate keys for two or more files, which formed by using the tree structure. Through this, the user can share more files with a single key at a time.