Biblio

Attack graphs provide compact representations of the attack paths an attacker can follow to compromise network resources from the analysis of network vulnerabilities and topology. These representations are a powerful tool for security risk assessment. Bayesian inference on attack graphs enables the estimation of the risk of compromise to the system's components given their vulnerabilities and interconnections and accounts for multi-step attacks spreading through the system. While static analysis considers the risk posture at rest, dynamic analysis also accounts for evidence of compromise, for example, from Security Information and Event Management software or forensic investigation. However, in this context, exact Bayesian inference techniques do not scale well. In this article, we show how Loopy Belief Propagation—an approximate inference technique—can be applied to attack graphs and that it scales linearly in the number of nodes for both static and dynamic analysis, making such analyses viable for larger networks. We experiment with different topologies and network clustering on synthetic Bayesian attack graphs with thousands of nodes to show that the algorithm's accuracy is acceptable and that it converges to a stable solution. We compare sequential and parallel versions of Loopy Belief Propagation with exact inference techniques for both static and dynamic analysis, showing the advantages and gains of approximate inference techniques when scaling to larger attack graphs.

Industrial control systems are cyber-physical systems that are used to operate critical infrastructures such as smart grids, traffic systems, industrial facilities, and water distribution networks. The digitalization of these systems increases their efficiency and decreases their cost of operation, but also makes them more vulnerable to cyber-attacks. In order to protect industrial control systems from cyber-attacks, the installation of multiple layers of security measures is necessary. In this paper, we study how to allocate a large number of security measures under a limited budget, such as to minimize the total risk of cyber-attacks. The security measure allocation problem formulated in this way is a combinatorial optimization problem subject to a knapsack (budget) constraint. The formulated problem is NP-hard, therefore we propose a method to exploit submodularity of the objective function so that polynomial time algorithms can be applied to obtain solutions with guaranteed approximation bounds. The problem formulation requires a preprocessing step in which attack scenarios are selected, and impacts and likelihoods of these scenarios are estimated. We discuss how the proposed method can be applied in practice.

This tutorial provides a thorough review of the main research directions in the field of identity management and identity related security threats in Online Social Networks (OSNs). The continuous increase in the numbers and sophistication levels of fake accounts constitutes a big threat to the privacy and to the security of honest OSN users. Uninformed OSN users could be easily fooled into accepting friendship links with fake accounts, giving them by that access to personal information they intend to exclusively share with their real friends. Moreover, these fake accounts subvert the security of the system by spreading malware, connecting with honest users for nefarious goals such as sexual harassment or child abuse, and make the social computing environment mostly untrustworthy. The tutorial introduces the main available research results available in this area, and presents our work on collaborative identity validation techniques to estimate OSN profiles trustworthiness.

Once organizations have the security incident and breaches, they have to pay tremendous costs. Although visible cost, such as the incident response cost, customer follow-up care, and legal cost are predictable and calculable, it is tough to evaluate and estimate the invisible damage, such as losing customer loyalty, reputation impact, and the damage of branding. This paper proposes a new method, called "Event Study Methodology with Twitter Sentimental Analysis" to evaluate the invisible cost. This method helps to assess the impact of the security breach and the impact on corporate valuation.

While we have long had principles describing how access control enforcement should be implemented, such as the reference monitor concept, imprecision in access control mechanisms and access control policies leads to risks that may enable exploitation. In practice, least privilege access control policies often allow information flows that may enable exploits. In addition, the implementation of access control mechanisms often tries to balance security with ease of use implicitly (e.g., with respect to determining where to place authorization hooks) and approaches to tighten access control, such as accounting for program context, are ad hoc. In this paper, we define four types of risks in access control enforcement and explore possible approaches and challenges in tracking those types of risks. In principle, we advocate runtime tracking to produce risk estimates for each of these types of risk. To better understand the potential of risk estimation for authorization, we propose risk estimate functions for each of the four types of risk, finding that benign program deployments accumulate risks in each of the four areas for ten Android programs examined. As a result, we find that tracking of relative risk may be useful for guiding changes to security choices, such as authorized unsafe operations or placement of authorization checks, when risk differs from that expected.

Users in social network are confronted with the risk of privacy leakage while sharing information with friends whose privacy protection awareness is poor. This paper proposes a security risk estimation framework of social network privacy, aiming at quantifying privacy leakage probability when information is spread to the friends of target users' friends. The privacy leakage probability in information spreading paths comprises Individual Privacy Leakage Probability (IPLP) and Relationship Privacy Leakage Probability (RPLP). IPLP is calculated based on individuals' privacy protection awareness and the trust of protecting others' privacy, while RPLP is derived from relationship strength estimation. Experiments show that the security risk estimation framework can assist users to find vulnerable friends by calculating the average and the maximum privacy leakage probability in all information spreading paths of target user in social network. Besides, three unfriending strategies are applied to decrease risk of privacy leakage and unfriending the maximum degree friend is optimal.

Building lightweight security for low-cost pervasive devices is a major challenge considering the design requirements of a small footprint and low power consumption. Physical Unclonable Functions (PUFs) have emerged as a promising technology to provide a low-cost authentication for such devices. By exploiting intrinsic manufacturing process variations, PUFs are able to generate unique and apparently random chip identifiers. Strong-PUFs represent a variant of PUFs that have been suggested for lightweight authentication applications. Unfortunately, many of the Strong-PUFs have been shown to be susceptible to modelling attacks (i.e., using machine learning techniques) in which an adversary has access to challenge and response pairs. In this study, we propose an obfuscation technique during post-processing of Strong-PUF responses to increase the resilience against machine learning attacks. We conduct machine learning experiments using Support Vector Machines and Artificial Neural Networks on two Strong-PUFs: a 32-bit Arbiter-PUF and a 2-XOR 32-bit Arbiter-PUF. The predictability of the 32-bit Arbiter-PUF is reduced to $\approx$ 70% by using an obfuscation technique. Combining the obfuscation technique with 2-XOR 32-bit Arbiter-PUF helps to reduce the predictability to $\approx$ 64%. More reduction in predictability has been observed in an XOR Arbiter-PUF because this PUF architecture has a good uniformity. The area overhead with an obfuscation technique consumes only 788 and 1080 gate equivalents for the 32-bit Arbiter-PUF and 2-XOR 32-bit Arbiter-PUF, respectively.

Use of digital token - which certifies the bearer's rights to some kind of products or services - is quite common nowadays for its convenience, ease of use and cost-effectiveness. Many of such digital tokens, however, are produced with software alone, making them vulnerable to forgery, including alteration and duplication. For a more secure safeguard for both token owner's right and service provider's accountability, digital tokens should be tamper-resistant as much as possible in order for them to withstand physical attacks as well. In this paper, we present a rights management system that leverages tamper-resistant digital tokens created by hardware-software collaboration in our eTRON architecture. The system features the complete life cycle of a digital token from generation to storage and redemption. Additionally, it provides a secure mechanism for transfer of rights in a peer-to-peer manner over the Internet. The proposed system specifies protocols for permissible manipulation on digital tokens, and subsequently provides a set of APIs for seamless application development. Access privileges to the tokens are strictly defined and state-of-the-art asymmetric cryptography is used for ensuring their confidentiality. Apart from the digital tokens being physically tamper-resistant, the protocols involved in the system are proven to be secure against attacks. Furthermore, an authentication mechanism is implemented that invariably precedes any operation involving the digital token in question. The proposed system presents clear security gains compared to existing systems that do not take tamper-resistance into account, and schemes that use symmetric key cryptography.

The data accessibility anytime and anywhere is nowadays the key feature for information technology enabled by the ubiquitous network system for huge applications. However, security and privacy are perceived as primary obstacles to its wide adoption when it is applied to the end user application. When sharing sensitive information, personal s' data protection is the paramount requirement for the security and privacy to ensure the trustworthiness of the service provider. To this end, this paper proposes communication security protocol to achieve data protection when a user is sending his sensitive data to the network through gateway. We design a cipher content and key exchange computation process. Finally, the performance analysis of the proposed scheme ensure the honesty of the gateway service provider, since the user has the ability to control who has access to his data by issuing a cryptographic access credential to data users.

5G, the fifth generation of mobile communication networks, is considered as one of the main IoT enablers. Connecting billions of things, 5G/IoT will be dealing with trillions of GBytes of data. Securing such large amounts of data is a very challenging task. Collected data varies from simple temperature measurements to more critical transaction data. Thus, applying uniform security measures is a waste of resources (processing, memory, and network bandwidth). Alternatively, a multi-level security model needs to be applied according to the varying requirements. In this paper, we present a multi-level security scheme (BLP) applied originally in the information security domain. We review its application in the network domain, and propose a modified version of BLP for the 5G/IoT case. The proposed model is proven to be secure and compliant with the model rules.

The increasing demand for secure interactions between network domains brings in new challenges to access control technologies. In this paper we design an access control framework which provides a multilevel mapping method between hierarchical access control structures for achieving multilevel security protection in cross-domain networks. Hierarchical access control structures ensure rigorous multilevel security in intra domains. And the mapping method based on subject attributes is proposed to determine the subject's security level in its target domain. Experimental results we obtained from simulations are also reported in this paper to verify the effectiveness of the proposed access control model.

Establishing and operating an Information Security Management System (ISMS) to protect information values and information systems is in itself a challenge for larger enterprises and small and medium sized businesses alike. A high level of automation is required to reduce operational efforts to an acceptable level when implementing an ISMS. In this paper we present the ADAMANT framework to increase automation in information security management as a whole by establishing a continuous risk-driven and context-aware ISMS that not only automates security controls but considers all highly interconnected information security management tasks. We further illustrate how ADAMANT is suited to establish an ISO 27001 compliant ISMS for small and medium-sized enterprises and how not only the monitoring of security controls but a majority of ISMS related activities can be supported through automated process execution and workflow enactment.

There is a long-standing need for improved cybersecurity through automation of attack signature detection, classification, and response. In this paper, we present experimental test bed results from an implementation of autonomic control plane feedback based on the Observe, Orient, Decide, Act (OODA) framework. This test bed modeled the building blocks for a proposed zero trust cloud data center network. We present test results of trials in which identity management with automated threat response and packet-based authentication were combined with dynamic management of eight distinct network trust levels. The log parsing and orchestration software we created work alongside open source log management tools to coordinate and integrate threat response from firewalls, authentication gateways, and other network devices. Threat response times are measured and shown to be a significant improvement over conventional methods.

The current state of the internet relies heavily on SSL/TLS and the certificate authority model. This model has systematic problems, both in its design as well as its implementation. There are problems with certificate revocation, certificate authority governance, breaches, poor security practices, single points of failure and with root stores. This paper begins with a general introduction to SSL/TLS and a description of the role of certificates, certificate authorities and root stores in the current model. This paper will then explore problems with the current model and describe work being done to help mitigate these problems.

In this paper, we focus on the security issues and challenges in smart grid. Smart grid security features must address not only the expected deliberate attacks, but also inadvertent compromises of the information infrastructure due to user errors, equipment failures, and natural disasters. An important component of smart grid is the advanced metering infrastructure which is critical to support two-way communication of real time information for better electricity generation, distribution and consumption. These reasons makes security a prominent factor of importance to AMI. In recent times, attacks on smart grid have been modelled using attack tree. Attack tree has been extensively used as an efficient and effective tool to model security threats and vulnerabilities in systems where the ultimate goal of an attacker can be divided into a set of multiple concrete or atomic sub-goals. The sub-goals are related to each other as either AND-siblings or OR-siblings, which essentially depicts whether some or all of the sub-goals must be attained for the attacker to reach the goal. On the other hand, as a security professional one needs to find out the most effective way to address the security issues in the system under consideration. It is imperative to assume that each attack prevention strategy incurs some cost and the utility company would always look to minimize the same. We present a cost-effective mechanism to identify minimum number of potential atomic attacks in an attack tree.

Cloud computing presents unlimited prospects for Information Technology (IT) industry and business enterprises alike. Rapid advancement brings a dark underbelly of new vulnerabilities and challenges unfolding with alarming regularity. Although cloud technology provides a ubiquitous environment facilitating business enterprises to conduct business across disparate locations, security effectiveness of this platform interspersed with threats which can bring everything that subscribes to the cloud, to a halt raises questions. However advantages of cloud platforms far outweighs drawbacks and study of new challenges helps overcome drawbacks of this technology. One such emerging security threat is of ransomware attack on the cloud which threatens to hold systems and data on cloud network to ransom with widespread damaging implications. This provides huge scope for IT security specialists to sharpen their skillset to overcome this new challenge. This paper covers the broad cloud architecture, current inherent cloud threat mechanisms, ransomware vulnerabilities posed and suggested methods to mitigate it.

The increasing complexity and ubiquity in user connectivity, computing environments, information content, and software, mobile, and web applications transfers the responsibility of privacy management to the individuals. Hence, making it extremely difficult for users to maintain the intelligent and targeted level of privacy protection that they need and desire, while simultaneously maintaining their ability to optimally function. Thus, there is a critical need to develop intelligent, automated, and adaptable privacy management systems that can assist users in managing and protecting their sensitive data in the increasingly complex situations and environments that they find themselves in. This work is a first step in exploring the development of such a system, specifically how user personality traits and other characteristics can be used to help automate determination of user sharing preferences for a variety of user data and situations. The Big-Five personality traits of openness, conscientiousness, extroversion, agreeableness, and neuroticism are examined and used as inputs into several popular machine learning algorithms in order to assess their ability to elicit and predict user privacy preferences. Our results show that the Big-Five personality traits can be used to significantly improve the prediction of user privacy preferences in a number of contexts and situations, and so using machine learning approaches to automate the setting of user privacy preferences has the potential to greatly reduce the burden on users while simultaneously improving the accuracy of their privacy preferences and security.

In this paper, we review big data characteristics and security challenges in the cloud and visit different cloud domains and security regulations. We propose using integrated auditing for secure data storage and transaction logs, real-time compliance and security monitoring, regulatory compliance, data environment, identity and access management, infrastructure auditing, availability, privacy, legality, cyber threats, and granular auditing to achieve big data security. We apply a stochastic process model to conduct security analyses in availability and mean time to security failure. Potential future works are also discussed.

Enterprises usually provide strong controls to prevent cyberattacks and inadvertent leakage of data to external entities. However, in the case where employees and data scientists have legitimate access to analyze and derive insights from the data, there are insufficient controls and employees are usually permitted access to all information about the customers of the enterprise including sensitive and private information. Though it is important to be able to identify useful patterns of one's customers for better customization and service, customers' privacy must not be sacrificed to do so. We propose an alternative — a framework that will allow privacy preserving data analytics over big data. In this paper, we present an efficient and scalable framework for Apache Spark, a cluster computing framework, that provides strong privacy guarantees for users even in the presence of an informed adversary, while still providing high utility for analysts. The framework, titled Shade, includes two mechanisms — SparkLAP, which provides Laplacian perturbation based on a user's query and SparkSAM, which uses the contents of the database itself in order to calculate the perturbation. We show that the performance of Shade is substantially better than earlier differential privacy systems without loss of accuracy, particularly when run on datasets small enough to fit in memory, and find that SparkSAM can even exceed performance of an identical nonprivate Spark query.

In the age of Big Data, we are witnessing a huge proliferation of digital data capturing our lives and our surroundings. Data privacy is a critical barrier to data analytics and privacy-preserving data disclosure becomes a key aspect to leveraging large-scale data analytics due to serious privacy risks. Traditional privacy-preserving data publishing solutions have focused on protecting individual's private information while considering all aggregate information about individuals as safe for disclosure. This paper presents a new privacy-aware data disclosure scheme that considers group privacy requirements of individuals in bipartite association graph datasets (e.g., graphs that represent associations between entities such as customers and products bought from a pharmacy store) where even aggregate information about groups of individuals may be sensitive and need protection. We propose the notion of $ε$g-Group Differential Privacy that protects sensitive information of groups of individuals at various defined group protection levels, enabling data users to obtain the level of information entitled to them. Based on the notion of group privacy, we develop a suite of differentially private mechanisms that protect group privacy in bipartite association graphs at different group privacy levels based on specialization hierarchies. We evaluate our proposed techniques through extensive experiments on three real-world association graph datasets and our results demonstrate that the proposed techniques are effective, efficient and provide the required guarantees on group privacy.

With the development of modern logistics industry railway freight enterprises as the main traditional logistics enterprises, the service mode is facing many problems. In the era of big data, for railway freight enterprises, coordinated development and sharing of information resources have become the requirements of the times, while how to protect the privacy of citizens has become one of the focus issues of the public. To prevent the disclosure or abuse of the citizens' privacy information, the citizens' privacy needs to be preserved in the process of information opening and sharing. However, most of the existing privacy preserving models cannot to be used to resist attacks with continuously growing background knowledge. This paper presents the method of applying differential privacy to protect associated data, which can be shared in railway freight service association information. First, the original service data need to slice by optimal shard length, then differential method and apriori algorithm is used to add Laplace noise in the Candidate sets. Thus the citizen's privacy information can be protected even if the attacker gets strong background knowledge. Last, sharing associated data to railway information resource partners. The steps and usefulness of the discussed privacy preservation method is illustrated by an example.

In smart grid, large quantities of data is collected from various applications, such as smart metering substation state monitoring, electric energy data acquisition, and smart home. Big data acquired in smart grid applications is usually sensitive. For instance, in order to dispatch accurately and support the dynamic price, lots of smart meters are installed at user's house to collect the real-time data, but all these collected data are related to user privacy. In this paper, we propose a data aggregation scheme based on secret sharing with fault tolerance in smart grid, which ensures that control center gets the integrated data without revealing user's privacy. Meanwhile, we also consider fault tolerance during the data aggregation. At last, we analyze the security of our scheme and carry out experiments to validate the results.

In the recent years, we have observed the development of several connected and mobile devices intended for daily use. This development has come with many risks that might not be perceived by the users. These threats are compromising when an unauthorized entity has access to private big data generated through the user objects in the Internet of Things. In the literature, many solutions have been proposed in order to protect the big data, but the security remains a challenging issue. This work is carried out with the aim to provide a solution to the access control to the big data and securing the localization of their generator objects. The proposed models are based on Attribute Based Encryption, CHORD protocol and $μ$TESLA. Through simulations, we compare our solutions to concurrent protocols and we show its efficiency in terms of relevant criteria.

Location privacy has become a significant challenge of big data. Particularly, by the advantage of big data handling tools availability, huge location data can be managed and processed easily by an adversary to obtain user private information from Location-Based Services (LBS). So far, many methods have been proposed to preserve user location privacy for these services. Among them, dummy-based methods have various advantages in terms of implementation and low computation costs. However, they suffer from the spatiotemporal correlation issue when users submit consecutive requests. To solve this problem, a practical hybrid location privacy protection scheme is presented in this paper. The proposed method filters out the correlated fake location data (dummies) before submissions. Therefore, the adversary can not identify the user's real location. Evaluations and experiments show that our proposed filtering technique significantly improves the performance of existing dummy-based methods and enables them to effectively protect the user's location privacy in the environment of big data.

Smart energy meters record electricity consumption and generation at fine-grained intervals, and are among the most widely deployed sensors in the world. Energy data embeds detailed information about a building's energy-efficiency, as well as the behavior of its occupants, which academia and industry are actively working to extract. In many cases, either inadvertently or by design, these third-parties only have access to anonymous energy data without an associated location. The location of energy data is highly useful and highly sensitive information: it can provide important contextual information to improve big data analytics or interpret their results, but it can also enable third-parties to link private behavior derived from energy data with a particular location. In this paper, we present Weatherman, which leverages a suite of analytics techniques to localize the source of anonymous energy data. Our key insight is that energy consumption data, as well as wind and solar generation data, largely correlates with weather, e.g., temperature, wind speed, and cloud cover, and that every location on Earth has a distinct weather signature that uniquely identifies it. Weatherman represents a serious privacy threat, but also a potentially useful tool for researchers working with anonymous smart meter data. We evaluate Weatherman's potential in both areas by localizing data from over one hundred smart meters using a weather database that includes data from over 35,000 locations. Our results show that Weatherman localizes coarse (one-hour resolution) energy consumption, wind, and solar data to within 16.68km, 9.84km, and 5.12km, respectively, on average, which is more accurate using much coarser resolution data than prior work on localizing only anonymous solar data using solar signatures.